NEC MULTISYNC X462HB - Manuals

Page 2 - Index

Index Declaration of conformity ............................................................................................................................. English-1Important Information ..................................................................................................................

Page 3 - English; For USA; For Canada; Declaration of conformity

English-1 English For USA FCC Information 1. Use the attached specified cables with the MultiSync X462HB (X462HB) color display so as not to interfere with radio and television reception.(1) Please use the supplied power cord or equivalent to ensure FCC compliance.(2) Please use a good quality shiel...

Page 4 - Important Information; WARNING; Declaration; Declaration of the Manufacturer

English-2 Important Information TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOTUSE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESSTHE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLT...

Page 5 - Safety Precautions, Maintenance & Recommended Use

English-3 English FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTI-FUNCTION MONITOR: • DO NOT OPEN THE MONITOR . There are no user serviceable parts inside and opening or removing coversmay expose you to dangerous shock hazards or other risks.Refer all servicing...

Page 6 - Contents; Setup Manual

English-4 Contents Power Cord* 1 Setup Manual Clamp x 3 Your new MultiSync monitor box* should contain the following: • LCD monitor • Power cord* 1 • Video Signal Cable • Wireless Remote Control and AA Batteries • Setup Manual • Cable cover • Clamp x 3 • Screw (M4 x 10) x 9 • CD-ROM • Thumbscrew for...

Page 7 - Mounting; Installation; Mounting location

English-5 English This device cannot be used or installed without the TabletopStand or other mounting accessory for support. For properinstallation it is strongly recommended to use a trained,NEC authorized service person. Failure to follow NECstandard mounting procedures could result in damage to t...

Page 8 - Attaching Mounting Accessories; Attach Mounting Accessories; Ventilation Requirements

English-6 Attaching Mounting Accessories The display is designed for use with the VESA mountingsystem. 1. Attach Mounting Accessories Be careful to avoid tipping monitor when attachingaccessories. Mounting accessories can be attached with the monitor inthe face down position. To avoid damaging the s...

Page 9 - Control Panel; Parts Name and Functions

English-7 English EXIT button Activates the OSD menu when the OSD menu is turned-off.Acts as EXIT button within the OSD to move to previousmenu. Remote control sensor and Power Indicator Receives the signal from the remote control (when using thewireless remote control). See also page 11.Glows green...

Page 10 - Terminal Panel

English-8 Terminal Panel Out In R G B H V RGB/HV R G B H V DVD/HD2 Pr Y Pb VIDEO2 VIDEO VIDEO IN connector (BNC and RCA) To input a composite video signal. BNC and RCA connectorsare not available at the same time (Use only one input). VIDEO OUT connector (BNC) To output the composite video signal fr...

Page 12 - Wireless Remote Control

English-10 POWER button Switches the power on/standby. INPUT button Selects input signal. DVI: DVIDISPLAYPORT: DPORTVGA: VGARGB/HV: RGB/HVHDMI: HDMIDVD/HD: DVD/HD1, DVD/HD2, SCARTVIDEO: VIDEO1, VIDEO2S-VIDEO: S-VIDEOOPTION: Depends on your connection PICTURE MODE button Selects picture mode, [HIGHBR...

Page 13 - Handling the remote control

English-11 English Operating Range for the RemoteControl Point the top of the remote control toward the LCD monitor ’sremote sensor during button operation. Use the remote control within a distance of about 7 m (23 ft.)from remote control sensor or at a horizontal and verticalangle of within 30° wit...

Page 14 - Setup

English-12 1. Determine the installation location CAUTION: Installing your LCD display must be done by aqualified technician. Contact your dealer formore information. CAUTION: MOVING OR INSTALLING THE LCD MONITORMUST BE DONE BY TWO OR MORE PEOPLE.Failure to follow this caution may result in injury i...

Page 16 - Connections; Before making connections:; Wiring Diagram

English-14 Connections NOTE: Do not connect/disconnect cables when turning on the monitor or other external equipment as this may result in aloss of the monitor image. NOTE: Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound. Before mak...

Page 17 - Connecting a Personal Computer; Connecting a DVD Player with HDMI out; Connecting a Computer with DisplayPort

English-15 English Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer ’s screen image.Some video cards with a pixel clock over 162MHz may not display an image correctly.Your LCD monitor displays proper image by adjusting the factory p...

Page 18 - Basic Operation; Power ON and OFF Modes

English-16 Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red or amber while powered off. NOTE: The Main Power Switch must be in the ON position in order to power up the monitor using the remote control or thePower Button on the ...

Page 19 - Using Power Management; To view a video source:; Power Indicator; Picture Aspect

English-17 English NORMAL: Displays the aspect ratio the same as it is sent from the source. FULL: Fills entire screen. WIDE: Expands a 16:9 letter box signal to fill entire screen. ZOOM (DYNAMIC): Expands a 4:3 pictures to fill the entire screen with non-linearity. Some of the outside image areawil...

Page 20 - Picture Mode; AMBIENT Mode; Information OSD; Figure 1

English-18 Picture Mode DVI, VGA, RGB/HV, DPORTSTANDARD sRGB AMBIENT1 AMBIENT2 HIGHBRIGHT HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV*STANDARD CINEMA AMBIENT1 AMBIENT2 HIGHBRIGHT AMBIENT Mode The brightness of the LCD screen can be set to increase or decrease depending on the amount o...

Page 21 - PICTURE MODE; THANK YOU FOR SAVING

English-19 English OSD (On-Screen-Display) Controls Press UP or DOWNbutton to selectsub-menu. Press SET. Press UP or DOWN,PLUS or MINUS to selectthe function or setting tobe adjusted. Press MENU or EXIT. Remote Control Press UP or DOWNbutton to select. Press INPUT buttonto decide. Press UP or DOWN, ...

Page 22 - PICTURE

English-20 Setting Default BRIGHTNESS Adjusts the overall image and background brightness. Press + or - to adjust. 70 Note: When AMBIENT1 or AMBIENT2 is selected in picture mode, this function cannot be changed. CONTRAST Adjusts the image brightness in relationship to the background. Press + or - to...

Page 23 - AUDIO

English-21 English H RESOLUTION Adjusts the horizontal size of the image. - VGA, RGB/HV inputs only V RESOLUTION Adjusts the vertical size of the image. - VGA, RGB/HV inputs only INPUT RESOLUTION If there is a problem with signal detection, this function forces the monitor to display the AUTO VGA, R...

Page 24 - PIP

English-22 TIME Configures the time for the real-time clock. - DAYLIGHT SAVING Configures daylight savings on or off. OFF SCHEDULE RESET Resets the following settings within the SCHEDULE menu back to factory setting: - OFF TIMER, SCHEDULE SETTINGS. KEEP PIP MODE Allows the monitor to remain in “PIP”...

Page 25 - MULTI DISPLAY

English-23 English INFORMATION OSD Selects whether the information OSD is displayed or not. The information OSD will be ON, 3 Sec. displayed when the input signal or source changes. The information OSD will also give awarning when there is no-signal or the signal is out-of range.An interval between ...

Page 26 - DISPLAY PROTECTION

English-24 LAN SETTING When you use this function, EXTERNAL CONTROL should be “LAN”.NOTE: When changing the LAN SETTING, you need to wait several seconds until the LANSETTING is applied. DHCP Enabling this option automatically assigns an IP address to the monitor from your DHCP server. DISABLE Disab...

Page 27 - ADVANCED OPTION

English-25 English INPUT DETECT Selects the method of input detection the monitor uses when more than two input devices FIRST DETECT All inputs except for TV* are connected. NONE The Monitor will not search the other video input ports. FIRST DETECT When the current video input signal is not present,...

Page 29 - For long life use as Public Display

English-27 English NOTE 1: CREATING A SCHEDULE The schedule function allows the display to be set to power on and off at different times. Up to seven different schedules can beprogrammed. To program the schedule: 1. Enter the SCHEDULE menu. Highlight SCHEDULE SETTINGS using the up and down buttons. ...

Page 30 - REMOTE CONTROL ID FUNCTION; Remote Control Function

English-28 REMOTE CONTROL ID FUNCTION REMOTE CONTROL ID The remote control can be used to control up to 100 individual MultiSync monitors usingwhat is called the REMOTE CONTROL ID mode. The REMOTE CONTROL ID modeworks in conjunction with the Monitor ID, allowing control of up to 100 individualMultiS...

Page 32 - Controlling the LCD monitor via RS-232C Remote Control

English-30 This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal. NOTE: When you use this function, EXTERNAL CONTROL should be “RS-232C” (See page 23). Functions that can be controlled by a personal computer are: • Power ON or OFF • Switching between input sign...

Page 33 - Connecting to a Network; Controlling the LCD monitor via LAN Control; Network Setting by Using an HTTP Browser; Overview

English-31 English Connecting to a Network Using a LAN cable allows you to specify the Network Settings and the Alert Mail Settings by using an HTTP server function. NOTE: When you use this function, EXTERNAL CONTROL should be “LAN” (See page 23). To use a LAN connection, you are required to assign ...

Page 35 - Alert Mail Setting

English-33 English Alert Mail Setting http://<the Monitor ’s IP address>/lanconfig.html Checking [ENABLE] will turn on the Alert Mail feature.Checking [DISABLE] will turn off the Alert Mail feature. Type in the hostname of the network connected to the monitor.Up to 60 alphanumeric characters c...

Page 36 - Features

English-34 Reduced Footprint: Provides the ideal solution for environments with superior image quality. Color Control Systems: Allows you to adjust the colors on your screen and customize the color accuracy of your monitor to a variety of standards. OmniColor: Combines Six-axis color control and the...

Page 37 - Troubleshooting

English-35 English No picture • The signal cable should be completely connected to thedisplay card/computer. • The display card should be completely seated in its slot. • Front Power Switch and computer power switch shouldbe in the ON position. • Check to make sure that a supported mode has beensele...

Page 38 - Specifications

English-36 Specifications Product Specifications LCD Module 46" /1168 mm diagonal Pixel Pitch: 0.746 mm Resolution: 1920 x 1080 dots Color: Over 16 million colors (depending on video card used) Brightness: 1500 cd/m 2 (Max.), 1200 cd/m 2 (Typ.) @25°C Contrast Ratio: 3500:1 (Typ.) Viewing Angle: ...

Page 39 - Pin Assignment

English-37 English 1) RS-232C input/output Pin No Name 1 connected to 7&8 2 RXD 3 TXD 4 connected to 6 5 GND 6 connected to 4 7 connected to 1&8 8 connected to 1&7 9 NC 1 6 5 9 D-SUB 9P This LCD monitor uses RXD, TXD and GND lines for RS-232C control. 2) REMOTE IN Pin Assignment 3) REMOT...

Page 40 - Manufacturer’s Recycling and Energy Information

English-38 NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’stop priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-friendly products, and always strive to help define and...