NEC LCD4215 - Manuals - manualsarea.com

Page 2 - Index

Index Important Information ................................................................................................................................... English-1 Warning, Caution ....................................................................................................................

Page 3 - English; Important Information; WARNING; Declaration of the Manufacturer; Registration Information; Declaration

English-1 English Important Information TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOTUSE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESSTHE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE H...

Page 5 - Safety Precautions, Maintenance & Recommended Use

English-3 English FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTI-FUNCTION MONITOR: • DO NOT OPEN THE MONITOR . There are no user serviceable parts inside and opening or removing coversmay expose you to dangerous shock hazards or other risks.Refer all servicing...

Page 6 - Contents; Setup Manual

English-4 Contents Power Cord* 1 Setup Manual Video Signal Cable (Mini D-SUB 15 pin to Mini D-SUB 15 pin) Wireless Remote Control and AAA Batteries Clamp x 2 Your new MultiSync monitor box* should contain the following: • LCD monitor • Power Cord* 1 • Video Signal Cable • Setup Manual • Wireless Rem...

Page 7 - Mounting; Installation; Mounting location

English-5 English This device cannot be used or installed without the TabletopStand or other mounting accessory for support. For properinstallation it is strongly recommended to use a trained,NEC authorized service person. Failure to follow NECstandard mounting procedures could result in damage to t...

Page 8 - Attaching Mounting Accessories; Attach Mounting Accessories; Figure 1; Ventilation Requirements

English-6 Attaching Mounting Accessories The display is designed for use with the VESA mountingsystem. 1. Attach Mounting Accessories Be careful to avoid tipping monitor when attachingaccessories. Mounting accessories can be attached with the monitor inthe face down position. To avoid damaging the s...

Page 9 - Control Panel; Parts Name and Functions

English-7 English 7 DOWN ( ) button Activates the OSD menu when the OSD menu is turned-off.Acts as button to move the highlighted area down toselect adjustment items within OSD menu. 8 EXIT button Activates the OSD menu when the OSD menu is turned-off.Acts as EXIT button within the OSD to move to pr...

Page 10 - Terminal Panel

English-8 Terminal Panel 8 AUDIO OUT To output the audio signal from the AUDIO IN 1, 2 and 3jack to an external device (stereo receiver, amplifier, etc.). 9 VIDEO INPUT/OUTPUT Connector VIDEO IN connector (BNC and RCA): To input a composite video signal. BNC and RCA connectors are notavailable at th...

Page 11 - Wireless Remote Control

English-9 English 8 PIP (Picture In Picture) button ON/OFF button: Toggle switches between PIP and POP. See page 22. INPUT button: Selects the “picture in picture” input signal. CHANGE button: Replaces to the main picture and sub picture.NOTE: The “PIP” and “POP” modes do not function whenthe screen...

Page 12 - Handling the remote control

English-10 Operating Range for the RemoteControl Point the top of the remote control toward the LCD monitor’sremote sensor during button operation. Use the remote control within a distance of about 7 m (23 ft.)from the front of the LCD monitor’s remote control sensor orat a horizontal and vertical a...

Page 13 - Determine the installation location; Setup

English-11 English 1. Determine the installation location CAUTION: Installing your LCD display must be done by aqualified technician. Contact your dealer formore information. CAUTION: MOVING OR INSTALLING THE LCD MONITORMUST BE DONE BY TWO OR MORE PEOPLE.Failure to follow this caution may result in ...

Page 15 - Connections; Before making connections:; Wiring Diagram

English-13 English Connections Before making connections: * First turn off the power of all the attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment. Wiring Diagram Personal computer BNC x 5 BNC x 3 RCA RCA RCA RCA To DVI output Mini D-su...

Page 16 - Connecting a Personal Computer; Connect the LCD Monitor to a Personal Computer

English-14 Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer’s screen image.Some video cards and a pixel clock over 165MHz may not display an image correctly.Your LCD monitor displays proper image by adjusting the factory preset timi...

Page 17 - Connect the LCD Monitor to a Computer with a Digital Output; Connecting with Digital Interface Equipment

English-15 English LCD monitor Equipment with adigital interface suchas a personalcomputer with RGBoutput (TMDS) DVI-D connector DVI-D connector To DVI output To audio output Connect the LCD Monitor to a Computer with a Digital Output • The RGB1 connector also accepts a DVI-D cable. • Input TMDS sig...

Page 18 - Connect the LCD Monitor to a DVD Player; Connecting a DVD Player with component out

English-16 Connect the LCD Monitor to a DVD Player • To connect the DVD/HD IN connector (BNC) on the LCD monitor, use an BNC connector cable (sold separately). Some DVD players may have different connectors such as DVI-D connector. Select [DVI/HD] mode from the “DVI MODE” menu. For mode selection, s...

Page 19 - Connect the LCD Monitor to a Stereo Amplifier; Connecting to a Stereo Amplifier

English-17 English Connect the LCD Monitor to a Stereo Amplifier • Turn on the LCD monitor and the amplifier only after all connections have been made. • Use a stereo Mini-RCA cable to connect the AUDIO OUT connector (Stereo Mini Jack) on the LCD monitor to the audioinput on the amplifier. • Do not ...

Page 20 - Basic Operation; Power ON and OFF Modes

English-18 Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red while powered off. NOTE: The Main Power Switch must be in the ON position in order to power up the monitor using the remote control or thePower Button on the front of ...

Page 21 - To view a video source:

English-19 English Picture Mode RGB1, RGB2, RGB3 STANDARD sRGB HIGHBRIGHT DVD/HD, VIDEO(S) STANDARD CINEMA HIGHBRIGHT NORMAL: Displays the aspect ratio the same as it is sent from the source. FULL: Fills entire screen. DYNAMIC: Expands a 4:3 pictures to fill the entire screen with non-linearity. Som...

Page 23 - PICTURE

English-21 English Setting Default BRIGHTNESS Adjusts the overall image and background brightness. CONTRAST Adjusts the image brightness in relation to the input signal.NOTE: sRGB picture mode is standard and cannot be changed. SHARPNESS Adjusts the crispness of the image. BLACK LEVEL Adjusts the im...

Page 25 - MULTI DISPLAY

English-23 English IR CONTROL Selects the infrared wireless remote controller mode.The item in this menu will become effective by pressing “SET” button on the selected item. NORMAL The monitor will be controlled normally by wireless remote controller. LOCK Disables the monitor control by infrared wi...

Page 26 - ADVANCED OPTION

English-24 DVI MODE Selects the kind of DVI-D equipment which is connected RGB1. INPUT RGB1 only Selects “DVI-PC” when PC or other computer equipment is connected.Selects “DVI-HD” when DVD player, which has DVI-D output, is connected. SCAN CONVERSION Selects IP (Interlace to Progressive) converter f...

Page 27 - For long life use as Public Display

English-25 English NOTE 1: CREATING A SCHEDULE Using the “SCHEDULE” function allows you to set up to seven different scheduled time intervals when the LCD Monitor will be activated.You can select the time the monitor turns on and turns off, the day of week the monitor is activated, and which input s...

Page 28 - Controlling the LCD monitor via RS-232C Remote Control

English-26 Controlling the LCD monitor via RS-232C Remote Control This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal. Functions that can be controlled by a personal computer are: • Power ON or OFF • Switching between input signals Connection LCD Monitor + PC...

Page 29 - Features

English-27 English Features Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. Color Control Systems: Allows you to adjust the colors on your screen and customize the color accuracy of your monitor to a variety of st...

Page 30 - Troubleshooting

English-28 Troubleshooting No picture • The signal cable should be completely connected to thedisplay card/computer. • The display card should be completely seated in its slot. • Front Power Switch and computer power switch shouldbe in the ON position. • Check to make sure that a supported mode has ...

Page 33 - Pin Assignment

English-31 English Pin Assignment 1) Analog RGB input (MiniDsub15p): VGA Pin No Name 1 Video Signal Red 2 Video Signal Green 3 Video Signal Blue 4 GND 5 DDC-GND 6 Red-GND 7 Green-GND 8 Blue-GND 9 +5V (DDC) 10 SYNC-GND 11 GND 12 DDC-SDA 13 H-SYNC 14 V-SYNC 15 DDC-SCL 2) VIDEO(S) input: VIDEO Pin No N...

Page 34 - Manufacturer’s Recycling and Energy Information

English-32 NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’stop priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-friendly products, and always strive to help define and...