NEC LCD1990SX - Manuals

NEC LCD1990SX – Manual in PDF format online.

Manuals:

Manual

Manual NEC LCD1990SX

Summary

Page 2 - Index

Index Warning, Caution ........................................................................................................................ English-1 Declaration .................................................................................................................................. Eng...

Page 3 - English; WARNING; Declaration; Declaration of the Manufacturer

English English-1 WARNING CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROMWALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THEPOWER CORD FROM THE AC OUTLET.DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVI...

Page 4 - FCC Information; Declaration of Conformity

English-2 Canadian Department of Communications ComplianceStatement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No. 60...

Page 5 - Contents

English English-3 Contents Your new NEC monitor box* should contain the following: • MultiSync LCD1990SX monitor with tilt/swivel/pivot/height adjust stand • Power Cord • Video Signal Cable (15-pin mini D-SUB male to DVI-A) • Video Signal Cable (DVI-D to DVI-D cable) • User ’s Manual • CD-ROM • Cabl...

Page 6 - Quick Start

English-4 Figure C.1 Figure C.2 Highest Stand Position Quick Start To attach the LCD monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the PC or MAC with DVI digital output: Connect the DVI signal cable to the connector of the display card in your syst...

Page 8 - Screen Rotation

English-6 Tilt Grasp top and bottom sides of the monitor screen with yourhands and adjust the tilt as desired ( Figure TS.1 ). Figure TS.1 Swivel Grasp both sides of the monitor screen with your hands andadjust the swivel as desired ( Figure TS.2 ). NOTE: Handle with care when tilting the monitor sc...

Page 9 - Flexible Arm Installation

English English-7 Figure S.1 4. Place one hand around the base and one hand on the Quick Release Lever. Move the Quick Release Lever in the direction indicated by the arrows ( Figure S.2 ). 5. Lift up the bottom of the stand to unhook it from the monitor ( Figure S.3 ). The monitor can now be mounte...

Page 10 - Brightness/Contrast Controls; BRIGHTNESS

English-8 Controls OSD (On-Screen Display) control buttons on the front of the monitor functionas follows: To access OSD menu, press MENU button.To change signal input, press the SELECT button. NOTE: OSD must be closed in order to change signal input. * The “LEFT/RIGHT” and “UP/DOWN” buttons functio...

Page 11 - ECO MODE; Image Controls

English English-9 ECO MODE Decreases the amount of power consumed by reducing the brightness level. 1: Decreases the brightness by 25%. 2: Decreases the brightness by 50%. CUSTOM: Decreases the brightness level as determined by the user. Refer to the Advanced OSD menu for custom setting instructions...

Page 12 - EXPANSION; Color Control Systems; Tools 1; SHARPNESS

English-10 AUTO FINE (Analog input only) This function automatically and periodically adjusts the “FINE” setting for change in signal condition.This function adjusts approximately every 33 minutes. EXPANSION Sets the zoom method. FULL: The image is expanded to 1280 x 1024, regardless of the resoluti...

Page 13 - MENU Tools

English English-11 OFF TIMER Monitor will automatically power-down when the end user has selected a pre-determined amount of time.Before powering off, a message will appear on the screen asking the user if they want to delay the turn off timeby 60 minutes. Press any OSD button to delay the turn off ...

Page 14 - Information

English-12 RESOLUTION NOTIFIER This optimal resolution is 1280 x 1024. If ON is selected, a message will appear on the screen after 30 seconds,notifying you that the resolution is not at 1280 x 1024. HOT KEY You can adjust the brightness and contrast directly. When this function is set to ON, you ca...

Page 15 - Recommended use

English English-13 Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOUR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous ...

Page 17 - Specifications

English English-15 Specifications Monitor Specifications MultiSync LCD1990SX Monitor Notes LCD Module Diagonal: 48.2 cm/19.0 inches Active matrix; thin film transistor (TFT) liquid Viewable Image Size: 48.2 cm/19.0 inches crystal display (LCD); 0.294 mm dot pitch; Native Resolution (Pixel Count): 12...

Page 18 - Features

English-16 Features Triple input Technology: Triple input technology allowing up to 3 input sources to be connected to a single monitor. The DVI-I connector supports both analog and digital input signals. Legacy analog input is supported using a traditional 15-pin VGA connector. Triple inputTechnolo...

Page 19 - Troubleshooting

English English-17 Troubleshooting No picture • The signal cable should be completely connected to the display card/computer. • The display card should be completely seated in its slot. • Check the Vacation Switch should be in the ON position. • Front Power Switch and computer power switch should be...

Page 20 - Appendix

English-18 Appendix If you need detailed information about the controls, please use the advanced menu. <How to use the advanced menu> • Turn off your monitor. • Turn on your monitor by pushing the “POWER” and “SELECT” button at the same time for at least one secondsimultaneously. Then press th...

Page 27 - Using the Auto Brightness function; SETUP

English English-25 Using the Auto Brightness function The brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient light within theroom. If the room is bright, the monitor becomes correspondingly bright. If the room is dim, then the monitor will dimaccording...

Page 29 - Disposing of your old NEC product; Manufacturer’s Recycling and Energy Information

English English-27 NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’stop priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-friendly products, and always strive to help de...