NEC LCD1850E - Manuals

NEC LCD1850E – Manual in PDF format online.

Manuals:

Manual

Manual NEC LCD1850E

Summary

Page 2 - CAUTION

English-1 English TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN ORMOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH ANEXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGSCAN BE FULLY INSERTED.REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGECOMPONENTS IN...

Page 3 - Declaration

English-2 Declaration Declaration of the Manufacturer We hereby certify that the colour monitor MultiSync LCD1850E (LCD1850E)MultiSync LCD1850E (LCD1850E-BK) is in compliance with Council Directive 73/23/EEC: – EN 60950 Council Directive 89/336/EEC: – EN 55022– EN 61000-3-2– EN 61000-3-3– EN 55024 a...

Page 4 - FCC Information

English-3 English For the Customer to use inU.S.A. or Canada Canadian Department of CommunicationsCompliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.Cet appareil numérique de la classe B respecte toutes les exige...

Page 5 - Declaration of Conformity

English-4 2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipmentgenerates, uses, and ...

Page 6 - Contents

English-5 English Contents Your new NEC MultiSync LCD monitor box* should contain the following: • MultiSync LCD1850E monitor with tilt base • Power Cord(s) • Video Signal Cable • User’s Manual • NEC LCD Setup Software, User’s Manual and other helpful files.To see the User‘s Manual, Acrobat Reader 4...

Page 7 - Quick Start

English-6 Quick Start To attach the MultiSync LCD monitor to your system, follow theseinstructions: 1. Turn off the power to your computer. 2. For the PC: Connect the 15-pin mini D-SUB signal cable to the connector of the display card in your system ( Figure A.1 ). For the Mac: Connect the MultiSync...

Page 10 - Tilt and Swivel

English-9 English Tilt and Swivel Grasp both sides of the monitor screen with your hands and adjust thetilt and swivel as desired ( Figure TS.1 ). Remove Monitor Stand for Mounting To prepare the monitor for alternate mounting purposes: 1. Disconnect all cables. 2. Place monitor face down on a non-a...

Page 12 - Brightness/Contrast Controls; BRIGHTNESS

English-11 English Menu Exits the OSM controls.Exits to the OSM main menu. Moves the highlighted area left/right to select controlmenus.Moves the highlighted area up/down to select one of thecontrols. Moves the bar left/right to increase or decrease theadjustment.Activates Auto Adjust function.Enter...

Page 13 - AUTO ADJUST; Auto Adjust; FINE; Colour Control Systems

English-12 AUTO ADJUST Adjusts the image displayed for non-standardvideo inputs. Auto Adjust Automatically adjusts the Image Position, the H. Sizeand Fine setting. Position Controls LEFT/RIGHT Controls Horizontal Image Position within the displayarea of the LCD. DOWN/UP Controls Vertical Image Posit...

Page 14 - sRGB; Tools 1; SHARPNESS; VIDEO DETECT

English-13 English sRGB sRGB mode dramatically improves the colour fidelity inthe desktop environment by a single standard RGBcolour space. With this colour supported environment,the operator could easily and confidently communicatecolours without further colour management overhead inthe most common...

Page 15 - Tools 2; LANGUAGE; OSM POSITION

English-14 LAST DETECT The video input has to be switched to the “LASTDETECT” mode. When the monitor is displaying asignal from the current source and a new secondarysource is supplied to the monitor, then the monitor willautomatically switch to the new video source. Whencurrent video input signal i...

Page 16 - RESOLUTION NOTIFIER; Information; DISPLAY MODE; OSM Warning

English-15 English RESOLUTION NOTIFIER This optimal resolution is 1280 x 1024. If ON isselected, a message will appear on the screen after30 seconds, notifying you that the resolution is not at1280 x 1024. FACTORY PRESET Selecting Factory Preset allows you to reset all OSMcontrol settings back to th...

Page 18 - Recommended Use

English-17 English Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC LCD COLOUR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to ...

Page 21 - Specifications

English-20 5 °C to 35 °C30% to 80%0 to 3,658 m-10 °C to +60 °C10% to 85%0 to 16,225 m Weight Environmental Considerations Operating Temperature: Humidity: Altitude: Storage Temperature: Humidity: Altitude: 8.6 kg (19.0 lbs) 16,777,216 31 kHz to 82 kHz55 Hz to 85 Hz 720 x 400* 1 :VGA text 640 x 480* ...

Page 23 - Features

English-22 Features sRGB Colour Control: A new optimized colour management standard which allows for colour matching on computer displays and otherperipherals. The sRGB, which is based on the calibrated colour space,allows for optimal colour representation and backward compatibility withother common...

Page 25 - No picture; Power Button does not respond; Image persistence

English-24 Troubleshooting No picture • The signal cable should be completely connected to the display card/computer. • The display card should be completely seated in its slot. • Check the Vacation Switch should be in the ON Position. Front powerSwitch and computer power switch should be in the ON ...

Page 26 - Display image is not sized properly

English-25 English Image is unstable, unfocused or swimming isapparent • Signal cable should be completely attached to the computer. • Use the OSM Image Adjust controls to focus and adjust display byincreasing or decreasing the fine total. When the display mode ischanged, the OSM Image Adjust settin...