Page 2 - Index
Index Warning .................................................................................................................... 1Contents ................................................................................................................. 2Display Setup .................................
Page 4 - Contents; Your new NEC MultiSync
2 Contents * Remember to save your original box and packing material to transport or ship the monitor. User's ManualMultiSync LCD1770VX Power Cord Mini D-SUB Cable User’s Manual Your new NEC MultiSync ® LCD monitor box* should contain the following: • MultiSync LCD1770VX monitor with height adjustab...
Page 5 - Display Setup
3 Display Setup To attach the MultiSync ® LCD monitor to your system, follow these instructions: 1. Turn off the power to your computer.2. For the PC or MAC with DVI digital output : Connect the DVI signal cable to theconnector of the display card in your system (Figure 1) . Tighten all screws. For ...
Page 6 - –continued
4 Display Setup –continued Figure 4 Figure 5 Figure 1 Figure 2 Figure 3 DVI Signal Cable Macintosh Cable Adapter (not included) Note: Some Macintosh systems do not require aMacintosh Cable Adapter Figure 6 DVI Cable (Top) PowerCable (Bottom) PowerCable 30 ° Tilt HighestStandPosition DVI Cable DVI Ca...
Page 8 - Raise and Lower Monitor Screen; Tilt and Swivel
6 Display Setup –continued Raise and Lower Monitor Screen The monitor may be raised or lowered. To raise or lower screen, place hands oneach side of the monitor and lift or lower to the desired height (Figure RL.1). NOTE: Handle with care when raising or lowering the monitor screen. Tilt and Swivel ...
Page 9 - Mounting; Remove Monitor Stand for Mounting
7 Mounting Remove Monitor Stand for Mounting To prepare the monitor for an alternate mounting method:1. Place hands on each side of the monitor and lift up to the highest position. Remove the cable cover ( Figure M.1 ). NOTE: If you have difficulty removing the cable cover, pleasepush the the notch ...
Page 10 - Flexible Arm Installation; Using the 4 screws from the stand removal
8 Flexible Arm Installation This LCD monitor is designed for use with a flexible arm. To mount the monitorto a flexible arm:1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand. 2. Using the 4 screws from the stand removal attach the arm to the monitor (Figure F.1 ...
Page 11 - Controls; Button; Brightness/Contrast Controls
9 Controls OSM ® (On-Screen Manager) control buttons on the front of the monitor function as follows:To access OSM menu, press any of the control buttons ( MENU/EXIT, Left, Right, Down, Up). To change signal input, press the SELECT button.NOTE: OSM must be closed in order to change signal input. NOT...
Page 12 - Tools
10 Controls –continued AccuColor ® Control Systems AccuColor ® Control Systems : Six color presets select the desired color setting (sRGB and NATIVE color presets are standard and cannot be changed). R,G,B: Increases or decreases Red, Green or Blue color depending upon which is selected. The change ...
Page 13 - Information
11 RESOLUTION NOTIFIER: If this option is ON, a message will appear on the screen after 30 seconds notifying the user that the optimal resolution is not being used.The optimal resolution is 1280 x 1024. Information The Information menu indicates the current input, display resolution, horizontal andv...
Page 14 - Safety Precautions and Maintenance; Recommended Use; CAUTION
12 Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC ® LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or othe...
Page 16 - Specifications
14 Monitor MultiSync ® LCD1770VX Notes Specifications Monitor LCD Module Diagonal : 17.0 inch Active matrix; thin film transistor (TFT) Viewable Image Size : 17.0 inch liquid crystal display (LCD); 0.264 mm dot Native Resolution (Pixel Count) : 1280 x1024 pitch; 250cd/m 2 white luminence; 500:1 cont...
Page 17 - Features
15 Features Thin-frame design creates more desktop space for you to work and play, while the flat screen’s crisp, bright images and crystal-clear text deliver a comfortable viewingexperience. No Touch Auto Adjust™ automatically adjusts your optimal image settings upon initial power-on. AccuColor ® C...
Page 18 - Troubleshooting
16 Troubleshooting No picture • The signal cable should be completely connected to the display card/computer.• The display card should be completely seated in its slot.• Make sure the Vacation Switch is in the ON position.• Front Power Switch and computer power switch should be in the ON position.• ...
Page 19 - References; NEC Monitor Customer Service & Support; Online Technical Support; Electronic Channels; Drivers and Downloads
17 References NEC Monitor Customer Service & Support Customer Service and Technical Support: (800) 632-4662 Fax: (800) 695-3044 Parts and Accessories/MacintoshCable Adapter: (800) 632-4662 Warranty Information: www.necdisplay.com Online Technical Support www.necdisplay.com Sales and Product Info...
Page 20 - Limited Warranty
18 Limited Warranty NEC Display Solutions of America, Inc. (hereinafter “NEC DISPLAY SOLUTIONS”) warrantsthis Product to be free from defects in material and workmanship and, subject to the conditionsset forth below, agrees to repair or replace (at NEC DISPLAY SOLUTIONS’ sole option) anypart of the ...
Page 21 - –Black Models; Why do we have environmentally labelled computers?
19 TCO’99 –Black Models Congratulations! You have just purchased a TCO’99 approved andlabelled product! Your choice has provided you with a product developedfor professional use. Your purchase has also contributed to reducing theburden on the environment and also to the further development ofenviron...
Page 22 - CFCs
20 TCO’99 –continued accumulative* processes. Flame retardants have been found in human blood and researchers fearthat disturbances in foetus development may occur.TCO’99 demand requires that plastic components weighing more than 25 grams must not containflame retardants with organically bound chlor...
Page 23 - –White Models
21 TCO’03 –White Models Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality andenvironmental requirements in the world. This makes for a high performance p...
Page 25 - Declaration of the Manufacturer
23 Declaration of the Manufacturer We hereby certify that the color monitor MultiSync ® LCD1770VX TM (L174F) is in compliance with Council Directive 73/23/EEC: – EN 60950-1 Council Directive 89/336/EEC: – EN 55022– EN 61000-3-2– EN 61000-3-3– EN 55024 and marked with NEC Display Solutions, Ltd. 4-13...
Page 26 - Informations FCC
24 AFIN D’ÉVITER TOUT RISQUE D’INCENDIE OU D’ÉLECTROCUTION, NE PAS EXPOSER CET APPAREIL À LA PLUIE OU ÀL’HUMIDITÉ. NE PAS UTILISER LA FICHE D’ALIMENTATION POLARISÉE AVEC UNE PRISE DE CORDON DE RALLONGEOU AUTRE PRISE SAUF SI LES BROCHES PEUVENT ÊTRE ENTIÈREMENT INTRODUITES.NE PAS OUVRIR LE BOÎTIER, L...
Page 27 - La boîte* de votre nouveau moniteur NEC MultiSync; Contenu
25 User's ManualMultiSync LCD1770VX La boîte* de votre nouveau moniteur NEC MultiSync ® contient : • Moniteur MultiSync LCD 1770VX avec sa base ajustable en hauteur • Cordon d'alimentation• Un cache-câbles• Câble pour le signal vidéo ( Mini D-SUB mâle 15 broches vers D-SUB) • Manuel de l’utilisateur...
Page 28 - Configuration de I’affichage
26 Configuration de I’affichage Suivez ces instructions pour fixer le moniteur ACL MultiSync ® à votre système: 1. Mettez votre ordinateur hors tension. 2. Pour le MAC ou le PC avec sortie numérique DVI Branchez le câble de signal DVI au connecteur de la carte d’écran de votre système (Figure 1) . S...
Page 31 - Levez et baissez l’écran du moniteur; Inclinaison et pivotement
29 Configuration de I’affichage (suite) Levez et baissez l’écran du moniteur Le moniteur peut être élevé ou abaissé. Pour élever ou abaisser l’écran, placez lesmains de chaque côté du moniteur et situez-le à la hauteur de votre choix ( Figure RL.1 ). REMARQUE: Manipule sur soin quand augmentant ou l...
Page 32 - Montage; Enlevez le support du moniteur pour le montage
30 Montage Enlevez le support du moniteur pour le montage Pour préparer le moniteur à des fins de montage différents :1. Placez les mains de chaque côté du moniteur en le soulevant dans sa position la plus haute. Enlevez la gaine de câble (Figure M.1) . REMARQUE: Si vous avez la difficulté enlever l...
Page 33 - REMARQUE
31 Installation du bras flexible Installation du bras flexible Ce moniteur ACL est conçu pour une utilisation avec un bras flexible. Pour fixerle moniteur à un bras flexible:1. Suivez les instructions sur comment enlever le support de moniteur pour le montage afin d’enlever le support. 2. Utilisez l...
Page 34 - Commandes; Commandes de luminosité/contraste; Réglage automatique
32 Bouton Menu principal MENU/EXIT Quitte les commandes OSM.Revient au menu principal OSM. Left/Right Déplace la zone en surbrillance vers la gauche ou la droite pour choisir un menu decommande.Déplace la barre vers la gauche ou la droite pour augmenter ou diminuer le réglage. Down/Up Déplace la zon...
Page 35 - Menu Outils
33 Système de contrôle des couleurs AccuColor ® Six colore prérégle sélectionner la désiré couleur mettant (sRGB et NATIVE couleur préréglesommes standards et cannot être transformé). R, V, B: Augmente ou diminue le niveau des couleurs rouge, vert ou bleu, suivant celui qui a été sélectionné. Le cha...
Page 37 - Usage recommandé; Consignes de sécurité et d’entretien
35 Usage recommandé Consignes de sécurité et d’entretien POUR UN FONCTIONNEMENT OPTIMAL, PRIÈRE DE NOTER CE QUI SUIT POUR LE RÉGLAGE ET L'UTILISATION DU MONITEUR COULEUR MULTISYNC ® LCD : • NE PAS OUVRIR LE MONITEUR. Aucune pièce intérieure ne nécessite l'intervention de l'utilisateur, et l'ouvertur...
Page 39 - Fiche technique; Moniteur
37 Fiche technique Caractér. techn. Moniteur Remarques du moniteur MultiSync ® LCD1770VX™ Module LCD Diagonale : 17,0 po Matrice active; transistor à film fin (TFT); Surface utile : 17,0 po affichage à cristaux liquides (LCD); Résolution (nombre de pixels) : 1280 x 1024 pas 0,264 mm; luminance blanc...
Page 40 - Fonctions
38 Fonctions Le design à mince encadrement vous permet de libérer davantage d’espace pour travailler et jouer, alors que les images brillantes et éclatantes et le texte aussi clair que ducristal de l’éran plat vous offrent une expérience de visionnement incomparable. La fonction avancée Réglage auto...
Page 41 - Dépannage
39 Dépannage Pas d'image • Le câble vidéo doit être bien connecté à la carte d'affichage et à l’ordinateur. • La carte d'affichage doit être insérée à fond dans son logement. • Vérifiez que l’interrupteur de vacances soit sur la position MARCHE. • Les interrupteurs d’alimentation du moniteur à l’ava...
Page 42 - Références; Service à la clientèle et assistance technique du moniteur NEC; Assistance technique en ligne; Courrier électronique; Pilotes et téléchargements
40 Références Service à la clientèle et assistance technique du moniteur NEC Service à la clientèle et assistance technique: (800) 632-4662 Télécopieur: (800) 695-3044 Pièces et accessoires/adaptateurde câble Macintosh: (800) 632-4662 Information sur la garantie: www.necdisplay.com Assistance techni...
Page 43 - Garantie limitée
41 Garantie limitée NEC Display Solutions of America, Inc. (ci-après «NEC DISPLAY SOLUTIONS») garantit que ce produit est exempt de vice de fabrication et de main-d’oeuvre et, selon les conditions énoncées ci-dessous, accepte de réparer ou remplacer, à sa discrétion, toute pièce de l’appareil concer...
Page 44 - Pourquoi des ordinateurs «éco-étiquetés»?; Exigences environnementales; – le modèle noir
42 Félicitations! Vous avez acheté un produit qui répond à la directive TCO’99. En choisissant ce produit conçu pour une utilisation professionnelle, vous contribuez aussi à la réduction des effets nuisibles sur l’environnement et aussi au développement continu de produits électroniques respectueux ...
Page 46 - le modèle blanc
44 TCO’03 – le modèle blanc Félicitations ! L’écran que vous venez d'acheter porte l’étiquette « Displays TCO’03 ». Ceci signifie que votre écran a été conçu, fabriqué,et vérifié selon certaines des directives relatives à la qualité et aux exigences environnementales les plus strictes au monde. Cela...
Page 48 - Déclaration du fabricant
46 Déclaration du fabricant Nous certifions par la présente que les moniteurs MultiSync ® LCD1770VX TM (L174F) conformes à la directive 73/23/EEC du Counseil: – EN 60950-1 la directive 89/336/EEC du Counseil: – EN 55022– EN 61000-3-2– EN 61000-3-3– EN 55024 et porte le sigle NEC Display Solutions, L...
Page 51 - DÉCLARATION DE CONFORMITÉ; Série LCD NEC
AVIS DE PROPRI É T É EXCLUSIVE ET DE D É GAGEMENT DE RESPONSABILIT É Les informations contenues dans ce document, y compris tous les designs et matériel s'y rapportant, sont la propriété deNEC Display Solutions of America, Inc. et/ou ses concédants. NEC Display Solutions of America, Inc. se réserve ...
Page 52 - PROPRIETARY NOTICE AND LIABILITY DISCLAIMER; DECLARATION OF CONFORMITY; NEC LCD Series
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NECDisplay Solutions of America, Inc. and/or its licensors, as appropriate, reserve all patent, copyright and other proprietaryrights to th...