NEC FP1375X - Manuals

NEC FP1375X – Manual in PDF format online.

Manuals:

Manual

Manual NEC FP1375X

Summary

Page 2 - Declaration

English-1 English Declaration Declaration of the Manufacturer We hereby certify that the colour monitorMultiSync FP1375X (NSZ3101STTUW) is incompliance with Council Directive 73/23/EEC: - EN 60950 Council Directive 89/336/EEC: - EN 55022- EN 61000-3-2- EN 61000-3-3- EN 55024 and marked with NEC-Mits...

Page 3 - CAUTION; Safety Instruction

English-2 E NERGY S TAR ® is a U.S. registered trademark. All other brands and product names are trademarks or registered trademarks of their respective owners. As an E NERGY S TAR Partner, NEC-Mitsubishi Electric Visual Systems Corporation has determined that this product meets the E NERGY S TAR gu...

Page 4 - FCC Information

English-3 English Canadian Department of CommunicationsCompliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CSA C22.2 #9...

Page 5 - Contents

English-4 Contents Your new MultiSync FP1375X monitor box* should contain the following: • MultiSync FP1375X Monitor with tilt/swivel base • Power cord for E.U. • Power cord for U.K. • Video Signal Cable (VGA to DVI-A) • Video Signal Cable (DVI-D to DVI-D) • User’s Manual • USB cable • CD-ROM:Includ...

Page 6 - Quick Start; For the PC Analog output:

English-5 English Quick Start To attach the MultiSync FP1375X monitor to your system, follow theseinstructions: 1. Turn off the power to your computer. 2. If necessary, install the display card into your system. For more information, refer to the display card manual. 3. For the PC Analog output: Con...

Page 7 - Troubleshooting

English-6 4. The Windows ® 95/98/2000/Me INF file for your MultiSync monitor can be found on the CD-ROM, delivered with the monitor. 5. Connect one end of the power cord to the MultiSync FP1375X monitor and the other end to the power outlet ( Figure C.1 ). 6. Turn on the monitor ( Figure D.1 ). 7. T...

Page 8 - Controls; PROCEED; Brightness/Contrast Controls; Main Menu

English-7 English Controls OSM (On-Screen Manager) control buttons on the front of the monitorfunction as follows: When OSM controls are activated, icons are displayed at the top of themenu. If an arrow ( → ) is displayed in a sub-menu, it indicates further choices are available. To enter a sub-menu...

Page 9 - Geometry Controls Menu

English-8 Degauss: Eliminates the build-up of stray magnetic fields which alter the correct scan of the electron beams and affect the purity of the screencolours, focus, and convergence. When activated, your screen image willjump and waver a bit as the screen is demagnetised. Caution: Please allow a...

Page 10 - Tools 1

English-9 English Sides Left/Right (pincushion balance): Decreases or increases the curvature of the sides either to the left or right. Sides Tilt (parallelogram): Decreases or increases the tilt of the sides either to the left or right. Sides Align (trapezoidal): Decreases or increases the bottom o...

Page 11 - RESET; Tools 2

English-10 GlobalSync Control: Eliminates picture impurities that may result from the earth’s magnetic field. While in the sub-menus (GLOBALSYNC, TOPLEFT, TOP RIGHT, BOTTOM LEFT or BOTTOM RIGHT), use the –/+control buttons to fine tune the GlobalSync corrections. Note: NEC recommends that you perfor...

Page 12 - Information

English-11 English NOTE: For standard systems and graphics boards, keep the factory setting at ENABLE. EdgeLock Control: Operating your monitor at a non-standard timing may cause images to appear darker than normal or have colourdistortion. Use of the EdgeLock control will adjust images to their nor...

Page 13 - Recommended use; Safety Precautions and Maintenance:

English-12 Recommended use Safety Precautions and Maintenance: FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC FP1375X COLOUR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable par ts inside and opening or removing covers may expose you to da...

Page 14 - Ergonomics

English-13 English CAUTION • Allow adequate ventilation around the monitor so that heat canproperly dissipate. Do not block ventilated openings or place themonitor near a radiator or other heat sources. Do not put anythingon top of monitor. • The power cable connector is the primary means of detachi...

Page 15 - Specifications

English-14 Unlimited number of Colours 30 kHz to 130 kHz50 Hz to 160 Hz 640 x 480 @50 to 160 Hz800 x 600 @50 to 160 Hz1024 x 768 @50 to 144 Hz1280 x 1024 @50 to 110 Hz1600 x 1200 @50 to 95 Hz ....1800 x 1350 @50 to 85 Hz1800 x 1440 @50 to 80 Hz1856 x 1392 @50 to 82 Hz1920 x 1440 @50 to 80 Hz2048 x 1...

Page 17 - Features; Flat Aperture Grille CRT:

English-16 Features Flat Aperture Grille CRT: Delivers an unparalleled viewing experience with a virtually flat image, eliminating distortion and reducing glare sothat what you see on-screen is what you get on your printed output. Thestriped phosphor alignment of the CRT delivers superior ver ticald...

Page 18 - Reduced Magnetic Field Technology:

English-17 English Reduced Magnetic Field Technology: Reduces magnetic and alternating electric field emissions and static electricity, addressingergonomic concerns regarding potential risks from extended computermonitor use. Multiple Frequency Technology: Automatically adjusts monitor to the displa...

Page 19 - Monitor Troubleshooting; No picture; LED on monitor is not lit (no green or orange colour can be seen)

English-18 Monitor Troubleshooting No picture • Display card should be completely seated in its slot. • Power Button and computer power switch should be in the ONposition. • Signal cable should be completely connected to display card/computer. • Check connector for bent or pushed-in pins. Image is s...

Page 20 - Display image is not centered, too small, or too large; Thin horizontal lines appear on your screen

English-19 English Display image is not centered, too small, or too large • Use the OSM Size and Position Controls to adjust the image. Thin horizontal lines appear on your screen • Thin horizontal lines are normal for an aper ture grille CRT and are nota malfunction. These are shadows from the damp...

Page 22 - Environmental Requirements

English-21 English The requirements cover a wide range of issues: environment,ergonomics, usability, emission of electrical and magnetic fields, energyconsumption and electrical and fire safety. The environmental demands concern restrictions on the presence anduse of heavy metals, brominated and chl...