NEC EA191M-BK - Manuals

English English-5 Contents Your new NEC MultiSync LCD monitor box* should contain the following: • MultiSync LCD monitor with tilt/swivel/pivot/height adjust stand • Power Cord • Cable cover • Video Signal Cable (15-pin mini D-SUB male to 15-pin mini D-SUB male) • Video Signal Cable (DVI-D to DVI-D)...

English-6 Quick Start To attach the MultiSync LCD monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the PC or MAC with DVI digital output: Connect the DVI signal cable to the connector of the display card in your system ( Figure A.1 ). Tighten all scre...

English-8 8. Connect the power cord to the power outlet ( Figure E.1 ). NOTE: If you have difficulty removing the cable cover, please push the lower opening upward to remove it, as show in Figure E.2 . NOTE: Please refer to Caution section of this manual for proper selection of AC power cord. 9. Tur...

English English-9 NOTE: Please disconnect all cables before screen rotation and connect them all again after screen rotation. Remove Monitor Stand for Mounting To prepare the monitor for alternate mounting purposes: 1. Place hands on each side of the monitor and lift up to the highest position. Remo...

English-10 Flexible Arm Installation This LCD monitor is designed for use with a flexible arm. To mount the monitor to a flexible arm: 1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand. 2. Using the 4 screws from the stand removal, attach the arm to the monitor ...

English English-11 Menu Open OSD main menu.Exits the OSD controls.Exits to the OSD main menu. Button MENU Controls OSD (On-Screen Display) control buttons on the front of the monitor functionas follows: To access OSD menu, press any of the control buttons (MENU, Left, Right, Down, Up).To change sign...

English-12 Image Controls (Analog input only) LEFT / RIGHT Controls Horizontal Image Position within the display area of the LCD. DOWN / UP Controls Vertical Image Position within the display area of the LCD. H.SIZE Adjusts the horizontal size by increasing or decreasing this setting. FINE Improves ...

English English-13 Information The Information menu indicates the current input, display resolution, horizontal and vertical frequency, and polaritysettings of the monitor. The model and serial numbers of your monitor are also indicated. CARBON SAVINGS: Display the estimated carbon saving informatio...

English-14 Specifications Monitor Specifications MultiSync EA191M Notes LCD Module Diagonal: 48.2 cm/19.0 inches Active matrix; thin film transistor (TFT) liquid Viewable Image Size: 48.2 cm/19.0 inches crystal display (LCD); 0.294 mm dot pitch; m / d c 0 5 2 4 2 0 1 x 0 8 2 1 : ) t n u o C l e x i ...

English English-15 Features Thin-frame design creates more desktop space for you to work and play, while the flat screen’s crisp, bright images and crystal- clear text deliver a comfortable viewing experience. No Touch Auto Adjust automatically adjusts your optimal image settings upon initial power-...

English-16 Troubleshooting No picture • The signal cable should be completely connected to the display card/computer. • The display card should be completely seated in its slot. • Front Power Switch and computer power switch should be in the ON position. • Check to make sure that a supported mode ha...

English English-17 TCO’03 Congratulations! The display you have just purchased carries the TCO’03 Displayslabel. This means that your display is designed, manufactured andtested according to some of the strictest quality and environmentalrequirements in the world. This makes for a high performancepr...

English-18 NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’stop priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-friendly products, and always strive to help define and...