NEC Dterm Analog Cordless Telephone - Manuals

Page 2 - Controls and Functions

1 Controls and Functions 1 memory – Enters or recalls numbers in mem-ory. 2 talk – Answers or places calls. 3 tone – Switches to tone dialing in pulse dial mode. 4 redial – Redials the last number. 5 pause – Adds a timed pause in a memory dialing sequence. 6 talk/battery low – An LED that indicates ...

Page 3 - Connecting the Base Unit; USING YOUR PHONE

2 Connecting the Base Unit 1. Connect the telephone line cord to the “TEL LINE” jack on the base unit and to a telephone outlet. 2. Connect the AC adapter to the DC IN 9V jack and to a standard 120 V AC wall outlet. 3. Set the base unit on a desk or tabletop and place the handset on the base unit. 4...

Page 4 - Receiver, Ringer Tone and Volume Control; Muting the Handset

3 Receiver, Ringer Tone and Volume Control The telephone has two ringer tones and each tone has two volume levels. While the telephone is idle, continue to press volume until you hear the ringer tone and volume level you want. The telephone has four receiver volume levels: Low , Medium , High , Maxi...

Page 5 - Storing Mixed Tone/Pulse Numbers; Dialing a Stored Number

4 Storing Mixed Tone/Pulse Numbers If the telephone is set up for pulse dialing, mixed mode numbers can be stored to easily access long distance services. 1. Remove the handset from the base unit. 2. Press memory . (The talk/battery low LED flashes and a beep is heard.) 3. Enter the number(s) to be ...

Page 6 - Selecting a Different Channel; Traveling Out of Range

5 Replacing a Stored Number When you enter the memory location number, any number previously stored for the memory location is replaced. Erasing a Stored Number 1. Remove the handset from the base unit. 2. Press memory twice. 3. Enter the memory location number (0~9) you want to erase. (You will hea...

Page 7 - Charging the Battery; Low Battery Indicator; Cleaning Battery Contacts

6 Headset Installation Your telephone may be used with an optional headset. To use this feature, simply plug the headset into the headset jack on the handset. Your telephone is ready for handsfree conversation. Setting the Dial Mode Switch Place the switch in the “Tone” position for tone dialing, or...

Page 8 - Beltclip Installation

7 Beltclip Installation 1. Insert the beltclip into the holes on each side of the handset. 2. Press down firmly until it clicks into the holes. If you have wall mounted the base, you cannot place the handset with the keypad facing inside. Pull both sides of the beltclip out of the holes to remove. D...

Page 9 - Optional Available Parts

8 Optional Available Parts Part Description Stock Number Headset with Foam Covered Ear and Microphone 730616 Replacement AC Adapter for Base Unit 760625 Replacement String-Type Beltclip 730624 Replacement Wall Mount Unit 730623