NEC 2400 PX - Manuals - manualsarea.com

Page 2 - LIABILITY DISCLAIMER

LIABILITY DISCLAIMER The information contained in this document is specific to D term Series E only. Minimum firmware may be required. Contact NEC Engineering for additionalinformation. NEC America, Inc. reserves the right to change the specifications, functions, orfeatures, at any time, without not...

Page 18 - ISSUE 1; Feature Programming Manual; Business Features; Page

NDA-24297 ISSUE 1 OCTOBER, 2000 NEAX2400 IPX Feature Programming Manual Feature List Business Features Page NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page i A-1 Attendant Camp-On with Tone Indication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 A-2 Attendant-Controll...

Page 19 - Called Station Status Display - D

NEAX2400 IPX Feature Programming Manual Page ii NDA-24297, Issue 1 Feature List (Continued) Business Features Page B-11 Boss - Secretary Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 B-12 Brokerage Hotline - Outside . . . . . . . . . . . . . . . . . ...

Page 20 - Elapsed Time Display - D

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page iii Feature List (Continued) Business Features Page C-73 Call Back - Delayed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 C-74 Call Forwarding - Don’t Answer - Outside . . . . . . . . ...

Page 21 - Flexible Ringing Assignment - D

NEAX2400 IPX Feature Programming Manual Page iv NDA-24297, Issue 1 Feature List (Continued) Business Features Page F-3D Flash Button - D term . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 352 F-4D Flash Entry - D term . . . . . . . . . . . . . . . . . ...

Page 22 - Multiple Line Operation - D

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page v Feature List (Continued) Business Features Page M-1 Meet-Me Paging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 464 M-2 Miscellaneous Trunk Access . . . . . . . . . . . . . . . . ....

Page 23 - Prime Line Pickup - D

NEAX2400 IPX Feature Programming Manual Page vi NDA-24297, Issue 1 Feature List (Continued) Business Features Page P-6 Pushbutton to Rotary Conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 582 P-7 Peg Count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Page 25 - CCIS Features; Dual Hold D

NEAX2400 IPX Feature Programming Manual Page viii NDA-24297, Issue 1 Feature List (Continued) CCIS Features Page Networking with NEAX2400 IPX and NEAX2000 IVS 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 797 A-44 Asynchronous Data Switching - CCIS . . . . . . . . . . . . . . . . . . . ....

Page 42 - * This feature is available on the condition that the NEAX2000 IVS

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page xxv Note 1: * This feature is available on the condition that the NEAX2000 IVS 2 is the satellite office. Note 2: ** Only 2 modes of Day/Night are available for NEAX2000 IVS 2 . Note 3: Telephone numbers should be used for activating CCI...

Page 43 - This page is for your notes.

NEAX2400 IPX Feature Programming Manual Page xxvi NDA-24297, Issue 1 This page is for your notes.

Page 44 - Attendant Camp-On with Tone Indication; General Description

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 1 Attendant Camp-On with Tone Indication A-1 A-1 Attendant Camp-On with Tone Indication General Description This feature permits the Attendant, when a desired station is busy, to hold an incoming call in a special waitingmode. The Attend...

Page 46 - Interactions; The Attendant Console must first be provided.; Programming; ASFC; FCCS Programming; No unique programming is required for the FCCS network.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 3 Attendant Camp-On with Tone Indication A-1 Interactions 1. System Data 2, Index 2, Bit 5 will enable ATTENDANT LOOP RELEASE [A-6], which allows 12 callsto be camped-on to stations by Attendant Console. 2. The Attendant Console must fir...

Page 47 - Attendant-Controlled Conference; Conference; ASDT

NEAX2400 IPX Feature Programming Manual Page 4 NDA-24297, Issue 1 A-2 Attendant-Controlled Conference A-2 Attendant-Controlled Conference General Description This feature permits the Attendant to establish a conference among as many as eight parties. The conferees mayconsist of any combination of st...

Page 48 - 3: Data terminal Via D; ASHP; ASHPN

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 5 Attendant-Controlled Conference A-2 Programming (cont’d) 2: PB3: DP/PB 12: D term 13: Data terminal Via D term 14: Hot Line15: CAS Line16: Data Terminal Via Data Module 18: Virtual Circuit23: ISDN Terminal 26: VPS27: Eight Conference E...

Page 49 - Attendant Console; Console

NEAX2400 IPX Feature Programming Manual Page 6 NDA-24297, Issue 1 A-3 Attendant Console A-3 Attendant Console General Description The ATTENDANT CONSOLE operates on a switched loop basis. Six Attendant loops terminate at each consolevia the associated position circuit. The Attendant can answer, origi...

Page 50 - ASYD; ASYDL; Assign the self FPC at the terminating node.; SWITCH NAME

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 7 Attendant Console A-3 Service Conditions (cont’d) 15. A PA-CS33 circuit card is required. The switch setting for PA-CS33 (ATI) is shown below: 16. The Attendant Console must be accommodated in one LN only when used in the IPX-U system....

Page 51 - Attendant Keypad; Keypad

NEAX2400 IPX Feature Programming Manual Page 8 NDA-24297, Issue 1 A-4 Attendant Keypad A-4 Attendant Keypad General Description This feature permits the Attendant to dial all calls from the ATTENDANT CONSOLE [A-3] via a push-button PAD. Operating Procedure Refer to the description of each service fe...

Page 52 - Attendant Lockout; Lockout; ATTENDANT OVERRIDE; ARTD; - Assign “0” to SFI 4 and SFI 11 to the SFC assigned to the stations.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 9 Attendant Lockout A-5 A-5 Attendant Lockout General Description This feature denies an Attendant the ability to re-enter an established trunk/station connection without being recalledby the station. Operating Procedure No manual operat...

Page 53 - Attendant Loop Release; Loop; ATTENDANT CONSOLE indicates an incoming call.; Service Conditions

NEAX2400 IPX Feature Programming Manual Page 10 NDA-24297, Issue 1 A-6 Attendant Loop Release A-6 Attendant Loop Release General Description This feature allows an ATTENDANT CONSOLE loop to become available for a second call as soon as theAttendant has directed the first call to a station, even if t...

Page 55 - Attendant Override; Override

NEAX2400 IPX Feature Programming Manual Page 12 NDA-24297, Issue 1 A-7 Attendant Override A-7 Attendant Override General Description This feature permits an Attendant to enter a busy trunk connection within the NEAX2400 IPX, via the AttendantConsole [A-3]. Upon activation, a warning tone will be hea...

Page 57 - “0” for ATTENDANT OVERRIDE to be allowed.

NEAX2400 IPX Feature Programming Manual Page 14 NDA-24297, Issue 1 A-7 Attendant Override Interactions (cont’d) 4. CALL FORWARDING - ALL CALLS [C-5], BUSY [C-2] or DON’T ANSWER [C-3]: If an Attendantattempts to busy verify an idle or busy station line that has activated the Call Forwarding feature, ...

Page 58 - Automatic Recall; Recall; No manual operation is required.; for other selectable timing choices.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 15 Automatic Recall A-8 A-8 Automatic Recall General Description This feature works as a timed reminder. When a call handled by the Attendant remains on hold, camped-on, orringing unanswered for a fixed interval, the Attendant is automat...

Page 60 - Transferred

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 17 Automatic Recall - D term A-8D A-8D Automatic Recall - D term General Description This feature works as a timed reminder. When a D term handled call remains on hold (EXCLUSIVE HOLD [E-4D] or NON-EXCLUSIVE HOLD [N-7D]) or during an una...

Page 61 - Announcement Service; Service; Dial the announcement trunk access code.; The following connections are available:; ANPD

NEAX2400 IPX Feature Programming Manual Page 18 NDA-24297, Issue 1 A-15 Announcement Service A-15 Announcement Service General Description This feature allows a user to hear a prearranged announcement when the user dials a predetermined access code. Operating Procedure 1. Lift the handset; receive d...

Page 63 - ALRTN; Assign the logical route number to the physical route.; AAEDN; Assign the announcement equipment data.; ARRCN

NEAX2400 IPX Feature Programming Manual Page 20 NDA-24297, Issue 1 A-15 Announcement Service FCCS Programming This data setting describes only the additional or replacement commands used to activate FCCSservices. When used as an FCCS feature, these commands replace the non-network commands (forexamp...

Page 64 - Alternate Routing; Routing

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 21 Alternate Routing A-16 A-16 Alternate Routing General Description This feature automatically routes outgoing on or off-net calls over alternate facilities when the first-choice trunkgroup is busy. The user selects the first-choice rou...

Page 65 - Refer to the NEAX2400 IPX Fusion Network System Manual.

NEAX2400 IPX Feature Programming Manual Page 22 NDA-24297, Issue 1 A-16 Alternate Routing FCCS Programming Refer to the NEAX2400 IPX Fusion Network System Manual.

Page 66 - Audible Indication Control; Indication; No programming is required.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 23 Audible Indication Control A-17 A-17 Audible Indication Control General Description This feature allows the Attendant to adjust the audible indications provided to the ATTENDANT CONSOLE [A-3]. Operating Procedure The Attendant Console...

Page 67 - Account Code; Code; To enter an ACCOUNT CODE

NEAX2400 IPX Feature Programming Manual Page 24 NDA-24297, Issue 1 A-18 Account Code A-18 Account Code General Description This feature is an adjunct to STATION MESSAGE DETAIL RECORDING [S-10], which provides a user with thecapability to enter a cost-accounting or client-billing code (up to 10 digit...

Page 69 - Note; ANPDL

NEAX2400 IPX Feature Programming Manual Page 26 NDA-24297, Issue 1 A-18 Account Code FCCS Programming This data setting describes only the additional or replacement commands used to activate FCCSservices. When used as an FCCS feature, these commands replace the non-network commands (forexample, AAED...

Page 70 - Attendant Night Transfer; To answer night call; The user dials the operator call code receives ringback tone.; for more

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 27 Attendant Night Transfer A-19 A-19 Attendant Night Transfer General Description When the ATTENDANT CONSOLE [A-3] is in night mode, any operator calls (dial 0 calls) are automaticallyrouted to a predetermined night station. Operating P...

Page 71 - A telephone number cannot be used (must be Physical Station Number).; There can be only one ATTENDANT NIGHT TRANSFER station per tenant.; ASID

NEAX2400 IPX Feature Programming Manual Page 28 NDA-24297, Issue 1 A-19 Attendant Night Transfer Service Conditions (cont’d) 12. Programmed Night Stations can use CALL HOLD [C-6], CALL TRANSFER [C-10, 11] and THREE-WAY CALLING [T-2], provided these features are programmed into the CLASS OF SERVICE -...

Page 72 - Authorization Code; Operating Procedure; Procedure 1

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 29 Authorization Code A-20 A-20 Authorization Code General Description An AUTHORIZATION CODE is a numerical code dialed by users (up to 10 digits), which will override the stationCLASS OF SERVICE - INDIVIDUAL [C-15] for facility access r...

Page 73 - Any combination 0 - 9

NEAX2400 IPX Feature Programming Manual Page 30 NDA-24297, Issue 1 A-20 Authorization Code Service Conditions 1. A maximum of 10 digits for AUTHORIZATION CODE can be dialed, and 8 digits will be registered onSTATION MESSAGE DETAIL RECORDING [S-10]. 2. The maximum number of AUTHORIZATION CODES is 4,0...

Page 74 - When a D; CODE will be recorded if previously dialed.; AATC

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 31 Authorization Code A-20 Interactions (cont’d) 5. There are no restrictions regarding the first digit of AUTHORIZATION CODES, except what isprogrammed in AMND. Tenant 0 does not conflict with the PBX numbering plan. This is true whense...

Page 76 - ASPA

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 33 Authorization Code A-20 Programming (cont’d) STEP 2: ANPD - Reserve a number level for feature access. Assign for Normal (N), Hooking (H), and Busy (B) (if applicable to any feature in this level). Assign NND in accordance with a pred...

Page 78 - Automatic Trunk Test; Input the TTLC and ATTD command.; the connecting office.; for details of the required programming.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 35 Automatic Trunk Test A-21 A-21 Automatic Trunk Test General Description The AUTOMATIC TRUNK TEST capability provides a functional test on a large number of trunks at a prearrangedtime. The results of the test are reported at the MAINT...

Page 80 - Authorization Code - Tie Line Incoming Routes; A-29 Authorization Code - Tie Line Incoming Routes; The outside calling party hears a special dial tone.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 37 Authorization Code - Tie Line Incoming Routes A-29 A-29 Authorization Code - Tie Line Incoming Routes General Description This service feature offers an outside party the ability to enter an AUTHORIZATION CODE [A- 20] through anincomi...

Page 82 - DATA

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 39 Authorization Code - Tie Line Incoming Routes A-29 Programming (cont’d) ASYD - System Data 1, Index 14 determines the algorithm used to calculate the last two digits of every AUTHORIZATION CODE. (Only decimal numbers may be used in th...

Page 83 - TIE Line Programming; - Assign the TIE Line routes as shown below:

NEAX2400 IPX Feature Programming Manual Page 40 NDA-24297, Issue 1 A-29 Authorization Code - Tie Line Incoming Routes Programming (cont’d) Note: Procedure 1 is not available with AUTHORIZATION CODE - TIE LINE INCOMING ROUTES. Forexample: 45 - 26428 - 623423 - 9-1-617-555-2323 (ACC) (AUTH CODE) (ACCO...

Page 85 - Automatic/Manual Intercom; Intercom; This feature permits multiple D; AUTOMATIC INTERCOM

NEAX2400 IPX Feature Programming Manual Page 42 NDA-24297, Issue 1 A-30 Automatic/Manual Intercom A-30 Automatic/Manual Intercom General Description This feature permits multiple D term users to simultaneously call all the stations in a preassigned group, regardless of their idle/busy status. An INT...

Page 86 - To bridge into a Manual Intercom call

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 43 Automatic/Manual Intercom A-30 Operating Procedure (cont’d) To bridge into a Manual Intercom call 1. When two stations are engaged in an INTERCOM call, a third station, belonging to the same INTERCOMgroup, will press the MICM key and ...

Page 87 - PRIORITY PRI

NEAX2400 IPX Feature Programming Manual Page 44 NDA-24297, Issue 1 A-30 Automatic/Manual Intercom Interactions (cont’d) 3. The AICD Command must be assigned before the AKYD command. 4. When assigning the PRI parameter in AKYD, the following data selections are available. 5. No programming is require...

Page 88 - Service Index

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 45 Automatic/Manual Intercom A-30 Programming (cont’d) RING: 0: No Ringing 1: Ringing - All Lines 2: Ringing on Prime Line Only3: Flexible Ring Assignment, enables RG parameter PRI: Form of Line Preference (0-3) KYN: Key Number (1-40)KYI...

Page 89 - Account Code - Attendant; The Attendant talks with the CO trunk call

NEAX2400 IPX Feature Programming Manual Page 46 NDA-24297, Issue 1 A-52 Account Code - Attendant A-52 Account Code - Attendant General Description This feature provides the ATTENDANT CONSOLE [A-3] with the capability to enter an Account Code into thesystem after talking with a CO outgoing/incoming c...

Page 91 - All Zone Paging; To operate from a station

NEAX2400 IPX Feature Programming Manual Page 48 NDA-24297, Issue 1 A-53 All Zone Paging A-53 All Zone Paging General Description This feature provides both the Attendant and a user with dial access to multiple zone paging equipment. Operating Procedure To operate from a station 1. The station goes o...

Page 92 - The D; - Assign the Paging route as shown below:

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 49 All Zone Paging A-53 Interactions (cont’d) 8. ALL-ZONE PAGING is not possible from CONSULTATION HOLD [C-17]. 9. CALL HOLD [C-6]: A Paging trunk cannot be placed on Call Hold. 10. The D term LCD display indicates BUSY when the Paging t...

Page 93 - Announcement Service - Attendant

NEAX2400 IPX Feature Programming Manual Page 50 NDA-24297, Issue 1 A-59 Announcement Service - Attendant A-59 Announcement Service - Attendant General Description This feature allows the Attendant, via the ATTENDANT CONSOLE [A-3], to hear a prearranged announcementwhen the Attendant dials a predeter...

Page 95 - Trunk Number

NEAX2400 IPX Feature Programming Manual Page 52 NDA-24297, Issue 1 A-59 Announcement Service - Attendant FCCS Programming (cont’d) EQP: Announcement Equipment Number0 = Dead Level 1 = Unused Number2-15 = Announcement service C: Duration of Connection0 = Disconnection occurs in 30 seconds1 = Connecti...

Page 96 - Calling; Press an idle loop key.; ASYDN

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 53 Attendant-To-Attendant Calling A-60 A-60 Attendant-To-Attendant Calling General Description This feature permits an Attendant, via an ATTENDANT CONSOLE [A-3], to access a non-specific free Attendantby dialing the operator access code,...

Page 97 - ALGNN

NEAX2400 IPX Feature Programming Manual Page 54 NDA-24297, Issue 1 A-60 Attendant-To-Attendant Calling FCCS Programming (cont’d) STEP 3: ALGNN - This command must be set to the NCN. STEP 4: ASATN - This command must be set to the NCN. Assign identification numbers to the specific Attendant Consoles....

Page 98 - Automatic Idle Return

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 55 Automatic Idle Return A-69 A-69 Automatic Idle Return General Description This feature enables a D term to become idle automatically after the predetermined time when the line is released by the opposite station on-hook, etc., on hand...

Page 101 - Automated Attendant; Attendant; The called party answers.; it takes priority over the second announcement.)

NEAX2400 IPX Feature Programming Manual Page 58 NDA-24297, Issue 1 A-82 Automated Attendant A-82 Automated Attendant General Description This feature allows a user outside the NEAX2400 IPX to access the system via a public or private network withoutthe Attendant or user's assistance. After or during...

Page 103 - Note 2

NEAX2400 IPX Feature Programming Manual Page 60 NDA-24297, Issue 1 A-82 Automated Attendant Programming (cont’d) 0/1: Redial is prompted by sending the second announcement/forcible disconnect Bit 6: Processing on PB Receiver Time-out. 0/1: Forcible disconnection/Transfer to ATT Index 128: Assign the...

Page 104 - ARTDN; - Assign the route data of the trunk for AUTOMATED ATTENDANT.; - Assign the Announcement Equipment for AUTOMATED ATTENDANT.; for the Digital Announcement Trunk.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 61 Automated Attendant A-82 FCCS Programming This data setting describes only the additional or replacement commands used to activate FCCSservices. When used as an FCCS feature, these commands replace the non-network commands (forexample...

Page 105 - Answer Hold - Attendant; To answer a call while engaged in a two-party call; When the Attendant is engaged in a two-party call:

NEAX2400 IPX Feature Programming Manual Page 62 NDA-24297, Issue 1 A-98 Answer Hold - Attendant A-98 Answer Hold - Attendant General Description This feature enables an Attendant to answer an incoming call by pressing the ANSWER key or flashing ICI key. Ifthe Attendant is already engaged in a call, ...

Page 107 - Authorization Code Display Elimination; PROCEDURE

NEAX2400 IPX Feature Programming Manual Page 64 NDA-24297, Issue 1 A-99 Authorization Code Display Elimination A-99 Authorization Code Display Elimination General Description This feature eliminates AUTHORIZATION CODE [A-20] and FORCED ACCOUNT CODE [F-7] from beingdisplayed on the D term for securit...

Page 108 - Attendant Overflow; Overflow; When the Attendant does not answer the call, the call overflows.; LDN NIGHT CONNECTION

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 65 Attendant Overflow A-105 A-105 Attendant Overflow General Description This feature allows incoming trunk calls directed to the ATTENDANT CONSOLE [A-3] to overflow to apredetermined night transfer destination station. The trunk call wi...

Page 109 - overflow to the destination station.

NEAX2400 IPX Feature Programming Manual Page 66 NDA-24297, Issue 1 A-105 Attendant Overflow Service Conditions (cont’d) 9. The overflow period, after which the call is transferred, is set in system data. 10. When the designated station used for ATTENDANT OVERFLOW has set CALL FORWARDING-DON’T ANSWER...

Page 110 - This parameter is displayed when assign CSC=6 or 7.; ACFR

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 67 Attendant Overflow A-105 FCCS Programming (cont’d) NND: Number of Necessary Digits (1-6)BLF: Busy Lamp Field STEP 4: ASPAL/ASPAN - Determine the kind of service and the service Access Code to be executed. TN: Tenant Number (1-255) ACC...

Page 111 - Add On Conference - 8 Party; To establish an 8-party conference

NEAX2400 IPX Feature Programming Manual Page 68 NDA-24297, Issue 1 A-121 Add On Conference - 8 Party A-121 Add On Conference - 8 Party General Description This service allows the 8-party conference to be established any time by any conferee by use of the 8-partyconference trunk. Operating Procedure ...

Page 114 - - assign FKY 83 to any D; s that require the use of the Retain Conference feature.; which require the use of the; - This data must be assigned to the node set Add On Conference - 8 Party.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 71 Add On Conference - 8 Party A-121 Programming (cont’d) STEP 5: ASHP - When the system accommodates multiple PA-CFTB circuit cards, assign a STATION HUNTING - TERMINATING group for the stations programmed to LEN level 0 of each PA-CFTB...

Page 115 - Calling Number XXXXXXXX

NEAX2400 IPX Feature Programming Manual Page 72 NDA-24297, Issue 1 A-125 Analog Caller ID (Class SM) A-125 Analog Caller ID (Class SM) General Description This feature allows the D term to display calling party’s number and/or name on the LCD when a call from analog C.O. line is terminated. In addit...

Page 116 - ABCDEFGHIJKLMNOPQRSTUVW*

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 73 Analog Caller ID (Class SM) A-125 Service Conditions (cont’d) d.) The display is flashing during termination. It is lit during conversation.e.) The following are examples of displays when the received digits of a calling number and na...

Page 117 - When Calling Number is output to SMDR:

NEAX2400 IPX Feature Programming Manual Page 74 NDA-24297, Issue 1 A-125 Analog Caller ID (Class SM) Programming (cont’d) System Data 1, Index 288, Bit 5. Expanded SMDR Output for SMDR A Apparatus. 0/1=Out/InService.System Data 1, Index 290, Bit 5. Expanded SMDR Output for SMDR B Apparatus. 0/1=Out/...

Page 118 - Analog Caller ID - Station; This service is provided for analog stations.; CIRCUIT CARD

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 75 Analog Caller ID - Station A-127 A-127 Analog Caller ID - Station General Description This feature allows a called station to receive CALLER ID information (time, calling number and name) fromCentral Office when a call terminates via ...

Page 120 - 6LCBY and 8RSTY must be used together for Caller ID.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 77 Analog Caller ID - Station A-127 Service Conditions (cont’d) q.) When the calling party or the intermediate party is Attendant Console, or the calling party number is not received when the call is terminated via C.O. line or tie line,...

Page 121 - Busy Lamp Field - Flexible

NEAX2400 IPX Feature Programming Manual Page 78 NDA-24297, Issue 1 B-2 Busy Lamp Field - Flexible B-2 Busy Lamp Field - Flexible General Description This feature provides the Attendant with visual indications of either busy, idle or LINE LOCKOUT [L-3] conditionsfor a particular group of stations via...

Page 122 - - Assign the Make Idle status to the trunk assigned in STEP 3.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 79 Busy Lamp Field - Flexible B-2 Interactions 1. CENTRALIZED ATTENDANT SERVICE (CAS) [C-20]: At the CAS main location, when theATTENDANT CONSOLE [A-3] is handling a call from a CAS branch over a Release Line Trunk (RLT),the BLF will giv...

Page 124 - Busy Verification; Verification; To activate

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 81 Busy Verification B-3 B-3 Busy Verification General Description When an Attendant places a call to a busy station, this feature allows the Attendant to break into the connection.When this feature is initiated from the console, the sys...

Page 125 - PRIVACY RELEASE

NEAX2400 IPX Feature Programming Manual Page 82 NDA-24297, Issue 1 B-3 Busy Verification Service Conditions (cont’d) PRIVACY RELEASE [P-18] THREE-WAY CALLING [T-2, T-2D] VOICE CALL - D term [V-2D] f.) Modem pooling connectiong.) Data Call through Data Adapterh.) Data Call through Data Modulei.) The ...

Page 128 - Station 201 - Secretary; Boss' Response Options; Secretary hangs up, boss speaks with Trunk B.; Secretary must have a D

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 85 Boss - Secretary Override - D term B-5D B-5D Boss - Secretary Override - D term General Description This feature enables a secretary to voice announce a call to a boss when he is currently on his My-Line. Operating Procedure • Station...

Page 130 - AKYD

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 87 Boss - Secretary Override - D term B-5D Programming (cont’d) STEP 5: AKYD - Optional. Assign to a programmable Line/Feature key a CALL HOLD [C-6] key. Assign Type:Function:CALL HOLD [10]. (The operation of TRANSFER key and access code...

Page 131 - To access from D

NEAX2400 IPX Feature Programming Manual Page 88 NDA-24297, Issue 1 B-6 Brokerage - Hotline B-6 Brokerage - Hotline General Description This feature provides a HOT LINE [H-1] function for D term . Operating Procedure To access from D term 1. Lift handset or press the SPEAKER key. 2. Press sub-line ke...

Page 132 - AHLS

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 89 Brokerage - Hotline B-6 Service Conditions (cont’d) • the destination station is off-hook. • the destination station is already engaged in a three-party call. c.) the destination is the Attendant or is connected to an outside party. 1...

Page 133 - a line appearance of the Hotline station number.; AHLSN; UGN: User Group Number

NEAX2400 IPX Feature Programming Manual Page 90 NDA-24297, Issue 1 B-6 Brokerage - Hotline Programming (cont’d) STEP 3: AKYD - Assign to a D term a line appearance of the Hotline station number. TN: 1 STN: Station Number TP: Type of D term (0/1) KYN: Key Number (1-40) KYI: Service Index0: Key not us...

Page 134 - Boss - Secretary - Message Waiting Lamp Control; The Call Indicator Lamp is used as the MW Lamp.; To set Message Waiting at a Boss' station; To cancel Message Waiting indication

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 91 Boss - Secretary - Message Waiting Lamp Control B-8 B-8 Boss - Secretary - Message Waiting Lamp Control General Description This feature allows a secretary, via her station, to control the Call Indicator Lamp Note or Message Waiting (...

Page 135 - The reorder tone is not heard while talking to the calling party.

NEAX2400 IPX Feature Programming Manual Page 92 NDA-24297, Issue 1 B-8 Boss - Secretary - Message Waiting Lamp Control Service Conditions (cont’d) 5. This feature is not restricted by CLASS OF SERVICE - INDIVIDUAL [C-15] on either the boss orsecretary stations. 6. BOSS-SECRETARY MW LAMP CONTROL indi...

Page 136 - FCCS link is not available for this feature.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 93 Boss - Secretary - Message Waiting Lamp Control B-8 Service Conditions (cont’d) d.) MUSIC ON HOLD [M-7] when the other party has pressed the HOLD key.e.) dialing of telephone number.f.) trunk origination or called-number dialing.g.) c...

Page 138 - Boss - Secretary Transfer; to D; To transfer from D; to a single line telephone; To cancel; Secretary

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 95 Boss - Secretary Transfer B-11 B-11 Boss - Secretary Transfer General Description This feature allows a secretary to voice-announce a call to a boss when the secretary answers a call to the boss' line. Operating Procedure To transfer ...

Page 139 - When the boss is using a D; , the boss must always press the line key in order to answer the call; - Boss’ My line must be assigned as a sub-line on the secretary’s phone.

NEAX2400 IPX Feature Programming Manual Page 96 NDA-24297, Issue 1 B-11 Boss - Secretary Transfer Service Conditions (cont’d) 4. This feature must be allowed in CLASS OF SERVICE - INDIVIDUAL [C-15] via system dataprogramming. 5. BOSS-SECRETARY TRANSFER [B-11] is denied if the secretary is connected ...

Page 140 - Brokerage Hotline - Outside; To access a BROKERAGE HOT LINE - OUTSIDE from a D; To immediately make another BROKERAGE HOT LINE - OUTSIDE call

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 97 Brokerage Hotline - Outside B-12 B-12 Brokerage Hotline - Outside General Description This feature provides a HOT LINE - OUTSIDE [H-9] function for a D term . Operating Procedure To access a BROKERAGE HOT LINE - OUTSIDE from a D term ...

Page 141 - ASPD

NEAX2400 IPX Feature Programming Manual Page 98 NDA-24297, Issue 1 B-12 Brokerage Hotline - Outside Service Conditions (cont’d) 15. The station, the Attendant Console / Desk Console (operator call), and the trunk can be a destination forHotline. 16. When Call Forwarding - All Calls/Busy Line/Don’t A...

Page 142 - User Group Number of the calling party

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 99 Brokerage Hotline - Outside B-12 Programming (cont’d) 2: Multi-line Key KD: 0 RG: Ringing Assignment per multi-line appearance0: No ringing1: Ringing in Day mode only2: Ringing in Night mode only3: Ringing in Day and Night mode FCCS P...

Page 143 - Blind Transfer To Attendant; This feature is not available on a tenant basis.

NEAX2400 IPX Feature Programming Manual Page 100 NDA-24297, Issue 1 B-17 Blind Transfer To Attendant B-17 Blind Transfer To Attendant General Description This feature allows a station to transfer a held call (station or trunk) to the Attendant Console and hang up withouthaving to wait for the Attend...

Page 145 - Blind Transfer To Station; To transfer a call in progress; This feature is available for stations in the FCCS network only.

NEAX2400 IPX Feature Programming Manual Page 102 NDA-24297, Issue 1 B-18 Blind Transfer To Station B-18 Blind Transfer To Station General Description This feature allows two Class Marks to be assigned to stations, enabling services such as Voice Mail, announcementmachine, etc. depending on the Class...

Page 146 - - Assign the following data to the SFC of the station:

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 103 Blind Transfer To Station B-18 Programming STEP 1: ASYD - System 1, Index 69, Bit 0: Processing for a case where the transfer destination station does not answer the call within apredetermined period of time. 0/1 = the transferring s...

Page 147 - Call Back; Back; To set; Dial the desired telephone number receive busy tone.; Dial CALL BACK cancel code receive service set tone.; CALL BACK service cannot be set when FCCS links are all busy.

NEAX2400 IPX Feature Programming Manual Page 104 NDA-24297, Issue 1 C-1 Call Back C-1 Call Back General Description This feature provides the ability for a calling station that has dialed a busy station to dial a CALL BACK code. Whenthis has been done, the calling station will be rung as soon as the...

Page 148 - that is holding a call or is being

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 105 Call Back C-1 Interactions (cont’d) 2. ASYD - System Data 1, Index 139, No Answer Timer is also used for station-to-station call, DID, or TIELine call for CALL FORWARDING - DON’T ANSWER [C-3], and CALL HOLD [C-6]. 3. CALL WAITING - O...

Page 149 - System timers may be set on a network basis in ASYDN.

NEAX2400 IPX Feature Programming Manual Page 106 NDA-24297, Issue 1 C-1 Call Back FCCS Programming (cont’d) STEP 2: ASPAL - Assign an access code to CALL BACK - Entry, SRV = SSC (Service Code), SID = 3 and a Connection Status Index (CI) for Busy (B) service. For CALL BACK - Cancel, SRV = SSC (Servic...

Page 150 - Called Station; Calling Station

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 107 Call Back - D term C-1D C-1D Call Back - D term General Description This feature provides the ability for a D term , which has dialed a busy station, to press a CALL BACK key. When this has been done, the calling station will be rung...

Page 151 - CALL BACK can only be activated from MY Line of a D; ATTENDANT CAMP-ON WITH TONE INDICATION

NEAX2400 IPX Feature Programming Manual Page 108 NDA-24297, Issue 1 C-1D Call Back - D term Service Conditions (cont’d) 4. There is no time limit for CALL BACK. Once activated, it will remain in status memory until completedor manually cancelled. 5. CALL BACK cannot be activated to more than one sta...

Page 153 - Call Forwarding - Busy Line; To set from an individual station

NEAX2400 IPX Feature Programming Manual Page 110 NDA-24297, Issue 1 C-2 Call Forwarding - Busy Line C-2 Call Forwarding - Busy Line General Description This feature permits a call to a busy station to be immediately forwarded to a predesignated station or to theATTENDANT CONSOLE [A-3]. If a called s...

Page 154 - Tenant Number

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 111 Call Forwarding - Busy Line C-2 Service Conditions (cont’d) 9. When MULTIPLE CALL FORWARDING - BUSY LINE [M-24] service is activated, hunting will beperformed at the last destination of the forwarded call, even though the multiple ju...

Page 155 - This service is available in the following occasions:

NEAX2400 IPX Feature Programming Manual Page 112 NDA-24297, Issue 1 C-2 Call Forwarding - Busy Line Service Conditions (cont’d) 21. This service is available in the following occasions: a.) When the destination of the CALL FORWARDING - BUSY LINE service is the calling station.b.) When the calling pa...

Page 156 - sets, CALL FORWARDING-BUSY LINE may be assigned to a programmable

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 113 Call Forwarding - Busy Line C-2 Interactions (cont’d) 9. A calling station, Attendant Console, or trunk can successfully activate EXECUTIVE RIGHT-OF-WAY[E-1], CALL WAITING-ORIGINATING [C-31], CALL WAITING-TERMINATING [C-12], or BUSYV...

Page 157 - To monitor; Target Station; FORWARD SET

NEAX2400 IPX Feature Programming Manual Page 114 NDA-24297, Issue 1 C-2D Call Forwarding - Busy Line - D term C-2D Call Forwarding - Busy Line - D term General Description This feature permits a call to a busy station to immediately be forwarded to a predesignated station, or to theAttendant. CALL F...

Page 158 - to a D; To monitor CALL FORWARDING - BUSY LINE to a D; To cancel CALL FORWARDING - BUSY LINE to a D

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 115 Call Forwarding - Busy Line - D term C-2D Operating Procedure (cont’d) To set CALL FORWARDING - BUSY LINE - D term to a D term multi-line 1. Press the multi-line key for which CALL FORWARDING - BUSY LINE - D term feature is to be set...

Page 159 - Intermediate Station; CF BUSY XXXX

NEAX2400 IPX Feature Programming Manual Page 116 NDA-24297, Issue 1 C-2D Call Forwarding - Busy Line - D term Service Conditions (cont’d) 3. This feature is assigned to stations through CLASS OF SERVICE - INDIVIDUAL [C-15] programmingin system data. 4. There is no limitation to the number of station...

Page 162 - may be assigned to a; - This data must be assigned to the node set Call Forwarding service.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 119 Call Forwarding - Busy Line - D term C-2D Programming STEP 1: ASYD - System Data 1, Index 5, Bit 0. Access codes for CALL FORWARDING BUSY LINE - D term and CALL FORWARDING - DON’T ANSWER [C-3] are same or separate? 0/1: Same/Separate...

Page 163 - Call Forwarding - Don’t Answer

NEAX2400 IPX Feature Programming Manual Page 120 NDA-24297, Issue 1 C-3 Call Forwarding - Don’t Answer C-3 Call Forwarding - Don’t Answer General Description This feature permits a call to an unanswered station to be forwarded to a predesignated station, or to the Attendant,when the called station d...

Page 164 - places a call to a station setting CALL FORWARDING - DON'T ANSWER.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 121 Call Forwarding - Don’t Answer C-3 Service Conditions (cont’d) 5. There is no limitation to the number of stations that can set the CALL FORWARDING - DON'TANSWER simultaneously. 6. CALL FORWARDING - DON'T ANSWER can be provided on ei...

Page 165 - If the CALL FORWARDING-DON’T ANSWER target station is a D; that has activated DO NOT

NEAX2400 IPX Feature Programming Manual Page 122 NDA-24297, Issue 1 C-3 Call Forwarding - Don’t Answer Service Conditions (cont’d) 20. When a call is forwarded through FCCS link, the numbering plan of the originally called station must beidentical with the one of the forwarded Attendant Console. 21....

Page 166 - sets, CALL FORWARDING-DON’T ANSWER may be assigned to a

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 123 Call Forwarding - Don’t Answer C-3 Programming (cont’d) System Data 1, Index 141. Assign the No Answer timer for incoming calls via the Attendant console. Itwill then be forwarded to the next station according to SYS1, Index 145 time...

Page 167 - single station user may set CALL FORWARDING - DON'T ANSWER - D; to all sub-lines on the D; Lift the handset or press the SPEAKER key receive dial tone.; To monitor CALL FORWARDING - DON'T ANSWER from a D; from MY Line; OR; Lift the handset or press the SPEAKER key.; Replace the handset or press the SPEAKER key.

NEAX2400 IPX Feature Programming Manual Page 124 NDA-24297, Issue 1 C-3D Call Forwarding - Don’t Answer - D term C-3D Call Forwarding - Don’t Answer - D term General Description This feature permits a call to an unanswered station to be forwarded to a predesignated station or to the Attendant,if the...

Page 168 - To cancel CALL FORWARDING - DON'T ANSWER from MY Line; FORWARD

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 125 Call Forwarding - Don’t Answer - D term C-3D Operating Procedure (cont’d) 5. If the target station is the Attendant, the LCD displays: To monitor CALL FORWARDING - DON'T ANSWER for a multi-line appearance other than the MY Line 1. Pr...

Page 169 - Intermediate Station Calling/Called Station; CF NANS XXXX

NEAX2400 IPX Feature Programming Manual Page 126 NDA-24297, Issue 1 C-3D Call Forwarding - Don’t Answer - D term Service Conditions (cont’d) 7. CALL FORWARDING - DON'T ANSWER - D term may also be accessed via the dial pad or SPEED CALLING - ONE TOUCH - D term [S-26D]. If this feature is accessed via...

Page 170 - are the same, only one key needs to be assigned in AKYD.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 127 Call Forwarding - Don’t Answer - D term C-3D Service Conditions (cont’d) 12. Stations are assigned this feature according to TENANT SERVICE [T-12] of the calling and destinationstations, when the called station does not answer for a ...

Page 172 - ACFO; destination (CFI) of either the Attendant Console or a station.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 129 Call Forwarding - Don’t Answer - D term C-3D Programming (cont’d) STEP 8: ACFO - For tenant-wide CALL FORWARDING-DON’T ANSWER-D term , assign CF = 2 for a destination (CFI) of either the Attendant Console or a station. FCCS Programmi...

Page 173 - Call Forwarding - All Calls; To activate from an individual station; Press an idle LOOP key.

NEAX2400 IPX Feature Programming Manual Page 130 NDA-24297, Issue 1 C-5 Call Forwarding - All Calls C-5 Call Forwarding - All Calls General Description This feature permits all calls destined for a particular station to be routed to another station (or to the Attendant)regardless of the busy or idle...

Page 174 - A telephone number must be set to the call forwarding destination.; Call Forwarding can only be activated from an idle station.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 131 Call Forwarding - All Calls C-5 Service Conditions (cont’d) 8. If the station's own telephone number is set for CALL FORWARDING - ALL CALLS, this feature ischanged to CALLING PARTY RECOGNITION SERVICE (CALL FORWARDING - ALL CALLS)[C-...

Page 175 - sets, CALL FORWARDING-ALL CALLS may be assigned to a programmable

NEAX2400 IPX Feature Programming Manual Page 132 NDA-24297, Issue 1 C-5 Call Forwarding - All Calls Interactions (cont’d) 7. When CALL FORWARDING-ALL CALLS is in effect, the activating station may be used to originatecalls. See System Data 2, Index 6, Bit 4. 8. When a station is call forwarded, the ...

Page 176 - To set from MY Line; To monitor from MY Line; Operator; To cancel from MY Line

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 133 Call Forwarding - All Calls - D term C-5D C-5D Call Forwarding - All Calls - D term General Description This feature permits all calls destined for a particular station to be routed to another station, or to the Attendant,regardless ...

Page 178 - FORWARD key is same as the CALL FORWARDING - ALL CALLS feature key.; CF ALL XXXX

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 135 Call Forwarding - All Calls - D term C-5D Service Conditions (cont’d) 6. CALL FORWARDING - ALL CALLS - D term may also be accessed via the dial pad or SPEED CALLING-ONE TOUCH [S-26D]. If this feature is accessed via the dial pad, it ...

Page 180 - Normally assigned as data “0”.; Note 1

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 137 Call Forwarding - All Calls - D term C-5D Programming (cont’d) System Data 1, Index 69, Bit 1 (Bit 2 - Burst of Tone for Recall). A burst of ringback tone to alert theperson receiving a CALL FORWARDING - ALL CALLS - D term call. In s...

Page 181 - Call Hold; Hold; To hold a call in progress

NEAX2400 IPX Feature Programming Manual Page 138 NDA-24297, Issue 1 C-6 Call Hold C-6 Call Hold General Description This feature permits any user to hold a call in progress by performing a switch hook flash and dialing apreprogrammed CALL HOLD code, thus allowing that line to be used for originating...

Page 182 - Attendant calls cannot be held.; A station can CALL HOLD only one call at a time.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 139 Call Hold C-6 Service Conditions (cont’d) 10. THREE-WAY CALLING [T-2]: This feature used in conjunction with the CALL HOLD feature, allowsthe calling user to transfer a second call while holding the first call. After transferring the...

Page 184 - To hold a call in progress without using the HOLD key

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 141 Call Hold - D term C-6D C-6D Call Hold - D term General Description This feature permits a D term user to HOLD a call in progress by using CALL HOLD - D term . Operating Procedure To hold a call in progress without using the HOLD key...

Page 185 - To operate a D; when CALL BACK has already been activated.; feature while CALL BACK is in effect toward it.

NEAX2400 IPX Feature Programming Manual Page 142 NDA-24297, Issue 1 C-6D Call Hold - D term Operating Procedure (cont’d) 7. Dial tone is restored to the phone, and user is free to make another call. To operate a D term via the FLASH BUTTON [F-3D] 1. When engaged in a conversation, press the programm...

Page 186 - cannot be activated when ATTENDANT CAMP-

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 143 Call Hold - D term C-6D Interactions (cont’d) 8. OUTGOING TRUNK QUEUING [O-2]: A user cannot be placed in a Ringback queue while holdinganother call on HOLD. 9. Attendant calls cannot be held. 10. ATTENDANT CAMP-ON [A-1]: CALL HOLD -...

Page 187 - To pick up an incoming call

NEAX2400 IPX Feature Programming Manual Page 144 NDA-24297, Issue 1 C-7 Call Pickup - Group C-7 Call Pickup - Group General Description This feature permits a user to answer any calls directed to other lines in the user’s preset CALL PICKUP - GROUPby dialing a Pickup code. A user can be assigned to ...

Page 192 - When Entering Data via LDM; TELN: Telephone Number of member stations; ACPEL

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 149 Call Pickup - Group C-7 FCCS Programming (cont’d) When Entering Data via LDM STEP 1: ANPDL - Assign 1st digit code (1st DC) and number of necessary digits (NND) for feature access and cancel. CI = N (Normal). STEP 2: ASPAL - Assign a...

Page 193 - To answer an incoming call; PICKUP XXXX

NEAX2400 IPX Feature Programming Manual Page 150 NDA-24297, Issue 1 C-7D Call Pickup - Group - D term C-7D Call Pickup - Group - D term General Description This feature permits a user to answer any call directed to another line in his preset CALL PICKUP - GROUP byusing a programmable line/feature ke...

Page 194 - There is no limit to the number of groups per system.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 151 Call Pickup - Group - D term C-7D Service Conditions (cont’d) 6. CALL TRANSFER - ALL CALLS: The capability to pick up the recall of CALL TRANSFER - ALLCALLS when CALL PICKUP - GROUP is activated, is not available. 7. There is no limi...

Page 198 - ACPGL; When using a soft key on a D; Series E, use ADSL and ADKS commands for necessary data assignment.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 155 Call Pickup - Group - D term C-7D FCCS Programming (cont’d) STEP 3: ACPGL - Assign members of CALL PICKUP GROUP. UGN: User Group Number = 1 (fixed) TELN: Telephone Number of member stations STEP 4: ACPEL - Assign members of CALL PICK...

Page 199 - Call Processing Indication; Processing; See DIGITAL DISPLAY-STATION

NEAX2400 IPX Feature Programming Manual Page 156 NDA-24297, Issue 1 C-8 Call Processing Indication C-8 Call Processing Indication General Description This feature provides visual indications at the ATTENDANT CONSOLE [A-3] of all calls being handled by theAttendant. Operating Procedure None. Service ...

Page 200 - Call Queueing; Queueing; and INCOMING CALL IDENTIFICATION

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 157 Call Queueing C-9 C-9 Call Queueing General Description This feature enables an Attendant to handle a series of exchange network calls in the order of their arrival,eliminating unnecessary delays. Operating Procedure Press ATTENDANT ...

Page 201 - Call Transfer - Attendant; Calling the Attendant; Dial the operator access code.; Answering by the Attendant; Refer to the NEAX2400 IPX Office Data Specification.; s, use the TRANSFER key instead of the switch hook.; Refer to BLIND TRANSFER TO ATTENDANT

NEAX2400 IPX Feature Programming Manual Page 158 NDA-24297, Issue 1 C-10 Call Transfer - Attendant C-10 Call Transfer - Attendant General Description This feature permits a user, while connected to an exchange network call, to signal the Attendant and have theAttendant transfer the call to another s...

Page 202 - A CALL TRANSFER to a D; ATNR

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 159 Call Transfer - Attendant C-10 Interactions (cont’d) 7. A CALL TRANSFER to a station with CALL FORWARDING [C-2, 3, 5] set will forward according tothe conditions of the feature set, unless the station is set to CALL FORWARD - ALL CAL...

Page 203 - Call Transfer - All Calls; Dial the third party receive ringback tone.; To set the Camp-on by Station function to the busy station; • Manual Operation; To answer the Camp-on by Station call from the busy station

NEAX2400 IPX Feature Programming Manual Page 160 NDA-24297, Issue 1 C-11 Call Transfer - All Calls C-11 Call Transfer - All Calls General Description This feature permits a user to transfer incoming or outgoing Central Office and intra-office calls to another stationwithin the system without Attenda...

Page 204 - for other selectable; The Camp-on by Station can be set to one station only once.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 161 Call Transfer - All Calls C-11 Service Conditions 1. The station performing the CALL TRANSFER - ALL CALLS can drop off the connection before thecalled party answers. If the called station does not answer within the predetermined time...

Page 207 - - Assign the first number level for the feature access code.

NEAX2400 IPX Feature Programming Manual Page 164 NDA-24297, Issue 1 C-11 Call Transfer - All Calls Programming STEP 1: ASYD - SYS2, Index 0, bit 0 = 1 (Allow the restriction for Call Back service) SYS2, Index 5, bit 2. Camp-on by Station is set automatically after the operating station is releasedfr...

Page 208 - This feature permits a D; The extension number of the third party

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 165 Call Transfer - All Calls - D term C-11D C-11D Call Transfer - All Calls - D term General Description This feature permits a D term user to transfer incoming or outgoing calls without Attendant assistance. The D term user can set Cam...

Page 209 - • Automatic Operation

NEAX2400 IPX Feature Programming Manual Page 166 NDA-24297, Issue 1 C-11D Call Transfer - All Calls - D term Operating Procedure (cont’d) 3. Method of operation: a.) When the access code is used, press the FLASH key; receive special dial tone and no indication on the LCD display, then dial the acces...

Page 210 - The LCD display is changed after the trunk receives ringback tone:; BUSY

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 167 Call Transfer - All Calls - D term C-11D Operating Procedure (cont’d) 2. Dial the third party, and the third party is busy; receive busy tone. The LCD of the operating stationdisplays: The extension number of the third party 3. Repla...

Page 211 - for other selectable timing

NEAX2400 IPX Feature Programming Manual Page 168 NDA-24297, Issue 1 C-11D Call Transfer - All Calls - D term Service Conditions 1. The station performing the CALL TRANSFER - ALL CALLS can disconnect before the called partyanswers. If the called station does not answer within the predetermined time, ...

Page 214 - The TRANSFER key is used in place of the switch hook.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 171 Call Transfer - All Calls - D term C-11D Programming STEP 1: ASYD - SYS2, Index 0, bit 0=1 (Allow the restriction for Call Back service) SYS2, Index 5, bit 2. Camp-on by Station is set automatically after the operating station is rel...

Page 215 - Call Waiting - Terminating; To activate from a station

NEAX2400 IPX Feature Programming Manual Page 172 NDA-24297, Issue 1 C-12 Call Waiting - Terminating C-12 Call Waiting - Terminating General Description This feature enables a busy station to receive a second incoming call. A Camp-On Indication Tone is sent to the busystation, the user can use a swit...

Page 218 - Call Waiting Lamp; Waiting

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 175 Call Waiting Lamp C-13 C-13 Call Waiting Lamp General Description This feature provides a visual indication to the Attendant when one or more calls are waiting to be answered. Operating Procedure Refer to the NEAX2400 IPX Office Data...

Page 219 - CAS

NEAX2400 IPX Feature Programming Manual Page 176 NDA-24297, Issue 1 C-13 Call Waiting Lamp Programming STEP 1: ASYD - System Data 1, Index 64, Bits 1 & 2. When will the number of calls waiting appear on the Attendant Console? 00: When Position Available Lamp is on (Attendant Console is not activ...

Page 220 - CCSA Access; Access; To place an outgoing CCSA call

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 177 CCSA Access C-14 C-14 CCSA Access General Description This feature enables connection to a CCSA network. CCSA networks provide customers with the use of acompletely private inter-facility dial system. They use individual facilities f...

Page 221 - Class Of Service - Individual

NEAX2400 IPX Feature Programming Manual Page 178 NDA-24297, Issue 1 C-15 Class Of Service - Individual C-15 Class Of Service - Individual General Description This feature permits all NEAX2400 IPX stations to be assigned a Class of Service in accordance with the degree ofsystem use desired. Each stat...

Page 222 - Telephone Class; business systems. Assign the SFC and RSC.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 179 Class Of Service - Individual C-15 Interactions (cont’d) 2. CALL FORWARDING [C-2, 3, 5]: Station-to-station calls can be forwarded to a fully restricted station.An attempt to forward an incoming trunk call to a fully restricted stati...

Page 223 - Service Feature Class; If a restricted station is routed to the ATT, all RRI 3 must be RES = 2.

NEAX2400 IPX Feature Programming Manual Page 180 NDA-24297, Issue 1 C-15 Class Of Service - Individual Programming (cont’d) TEC: Telephone Class (1-31)1: DP (10pps) 2: PB 3: DP/PB 12: D term 13: Data terminal via D term 14: Hotline 15: CAS Line 16: Data terminal via Data Module 18: Virtual Circuit 2...

Page 224 - Consultation Hold - All Calls; Holding the original call and placing the second call

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 181 Consultation Hold - All Calls C-17 C-17 Consultation Hold - All Calls General Description This feature permits a user to hold any incoming or outgoing public network or TIE Line call, or any intra-officecall, while originating a call...

Page 227 - To hold original call and place second call from a D; To return to the original call from a D

NEAX2400 IPX Feature Programming Manual Page 184 NDA-24297, Issue 1 C-17D Consultation Hold - All Calls - D term C-17D Consultation Hold - All Calls - D term General Description This feature permits a D term user to hold any incoming or outgoing public network or TIE Line, or any Intra-office calls,...

Page 230 - Recall on Don't Answer Call

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 187 Centralized Attendant Service (CAS) C-20 C-20 Centralized Attendant Service (CAS) General Description For applications requiring multiple sites, but having common interests or operation, the NEAX2400 IPX can operatein a Main (attende...

Page 231 - Remote Hold; The Attendant converses with a central office party.; Operator Call; The night station must be provided with DTMF signaling.

NEAX2400 IPX Feature Programming Manual Page 188 NDA-24297, Issue 1 C-20 Centralized Attendant Service (CAS) Operating Procedure (cont’d) Remote Hold 1. The Attendant converses with a central office party. 2. The Attendant presses the SHF key; hears special dial tone. 3. The Attendant dials the Remo...

Page 233 - Main System; Console switch hook flash and the dialing of digits.; trunk display when used as a Night Station.

NEAX2400 IPX Feature Programming Manual Page 190 NDA-24297, Issue 1 C-20 Centralized Attendant Service (CAS) Interactions (cont’d) 9. When the Night stations are located at the satellite PBX and no Attendant Console is provided, a Nightkey must be installed at the satellite location to activate nigh...

Page 234 - TAS; - Reserve a number level for feature access.; Satellite System; system location. This value is 30 seconds.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 191 Centralized Attendant Service (CAS) C-20 Programming (cont’d) STEP 4: ACSI - Assign the Incoming CAS Route and Trunk to the Night Station and Tenant number. Assign the CSI = 4 for Night Connection. TAS STEP 1: ANPD - Reserve a number...

Page 235 - ACSI

NEAX2400 IPX Feature Programming Manual Page 192 NDA-24297, Issue 1 C-20 Centralized Attendant Service (CAS) Programming (cont’d) STEP 7: ACSI - Assign the Incoming Satellite trunks to be answered at the Main system CSI = 3, Direct In Termination, Day and Night Mode. Then assign the stations program...

Page 236 - Code Calling Access

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 193 Code Calling Access C-21 C-21 Code Calling Access General Description This feature provides the ATTENDANT CONSOLE [A-3] and users dial access to Code Calling equipment. Operating Procedure 1. Go off hook; receive dial tone. 2. Dial t...

Page 237 - can be restricted on a system-wide basis. The LCD

NEAX2400 IPX Feature Programming Manual Page 194 NDA-24297, Issue 1 C-22D Called Station Status Display - D term C-22D Called Station Status Display - D term General Description This feature provides for the status of a called station to appear on the LCD display of a calling D term . Operating Proc...

Page 238 - Calling Number Display - D

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 195 Calling Number Display - D term C-24D C-24D Calling Number Display - D term General Description This feature provides for the station and trunk number of an incoming call to appear on the D term 's LCD display. This display will flas...

Page 239 - This feature is provided on a per-tenant basis.; When encountering a Restricted Route

NEAX2400 IPX Feature Programming Manual Page 196 NDA-24297, Issue 1 C-25 Call Forwarding-Intercept / Announcement C-25 Call Forwarding-Intercept / Announcement General Description This feature provides for interception of STATION-TO-STATION [S-11], DIRECT INWARD DIALING [D-8],Attendant-to-Station an...

Page 240 - When encountering all trunks busy; - Assign the announcement route as shown below:; ATRK; - Assign the Make Idle status to the Announcement Trunk.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 197 Call Forwarding-Intercept / Announcement C-25 Service Conditions (cont’d) When encountering all trunks busy 14. This service feature is valid for outgoing station-to-trunk or tandem trunk-to-trunk connections. 15. Automatic OUTGOING ...

Page 241 - ARRC

NEAX2400 IPX Feature Programming Manual Page 198 NDA-24297, Issue 1 C-25 Call Forwarding-Intercept / Announcement Programming (cont’d) STEP 5: ARRC - If TIE Line or REMOTE ACCESS TO PBX [R-2] connection to the ANNOUNCEMENT SERVICE Trunk is required, allow trunk-to-trunk connection using ARI-D-RES, D...

Page 243 - Call Forwarding - Override; ), or if Station A places an incoming call into hold condition; LCD displays as shown below:; the D; stations allowed LCD indication of this service.; TRANSFER; TRANSFER; Station B

NEAX2400 IPX Feature Programming Manual Page 200 NDA-24297, Issue 1 C-26 Call Forwarding - Override C-26 Call Forwarding - Override General Description This feature allows a target user (Station A) to call the station (Station B) which has set CALL FORWARDING -ALL CALLS [C-5] to it. If the called st...

Page 244 - This service feature allows a D; is activated; Trunk/Telephone Number; is operated by pressing the ANSWER key located on the D

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 201 Call Waiting - Answer - D term C-27D C-27D Call Waiting - Answer - D term General Description This service feature allows a D term user to answer a CAMPED-ON [A-1] or CALL WAITING [C-12, 31] call while putting an existing call on HOL...

Page 246 - To monitor from a multi-line D

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 203 Call Forwarding - All Calls - Outside C-28 C-28 Call Forwarding - All Calls - Outside General Description This feature allows a call, which originates from a station or trunk and is destined for a station, to be routed to anotherstat...

Page 247 - To cancel from a multi-line D; The calling D; as regular outgoing CO calls. The calling D; A maximum of 24 digits, including trunk access code, can be stored.

NEAX2400 IPX Feature Programming Manual Page 204 NDA-24297, Issue 1 C-28 Call Forwarding - All Calls - Outside Operating Procedure (cont’d) To cancel from a multi-line D term 1. Lift the handset or press the SPEAKER key; receive dial tone. Press the CALL FORWARDING - ALLCALLS FORWARD feature key; re...

Page 248 - A call can be forwarded to a trunk in the remote node via FCCS link.; This feature may be set from the Attendant Console.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 205 Call Forwarding - All Calls - Outside C-28 Service Conditions (cont’d) 13. When the incoming call is forwarding to the public network, be sure to add the outgoing access code +destination area code or the outgoing access code includi...

Page 250 - Call Park; Park; To retrieve a parked call from any station within the system; An Attendant cannot retrieve a parked call.; To park a call from a station

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 207 Call Park C-29 C-29 Call Park General Description This feature enables the Attendant(s) or users to “Park” calls against their own extension numbers. Calls can easilybe retrieved from any station within the system. Operating Procedur...

Page 254 - Dial the CALL PICKUP - DIRECT code receive special dial tone.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 211 Call Pickup - Direct C-30 C-30 Call Pickup - Direct General Description This feature allows a user to pick up a call to any other station in the system by dialing a specific CALL PICKUP-DIRECT code. Operating Procedure To pick up an ...

Page 255 - - Assign a Service Feature Class that allows SFI 29 to the stations.

NEAX2400 IPX Feature Programming Manual Page 212 NDA-24297, Issue 1 C-30 Call Pickup - Direct Programming (cont’d) STEP 2: ANPD - Reserve a number level for feature access. Assign for Normal (N), Hooking (H), and Busy (B). STEP 3: ASPA - Assign an access code to CALL PICKUP-DIRECT, SRV = SSC (Servic...

Page 256 - Call Waiting - Originating; Soft key can be used for the D; To answer

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 213 Call Waiting - Originating C-31 C-31 Call Waiting - Originating General Description This feature provides selected stations with Camp-On capability to a busy internal station. Operating Procedure To activate 1. Dial the desired telep...

Page 259 - This command is used for assigning the function of each soft key.

NEAX2400 IPX Feature Programming Manual Page 216 NDA-24297, Issue 1 C-31 Call Waiting - Originating Programming (cont’d) STEP 2: ANPD - Reserve a number level for feature access. Assign for Normal (N), Hooking (H), and Busy (B). Assign NND in accordance with a predetermined numbering plan. STEP 3: A...

Page 260 - Consecutive Dialing - Attendant

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 217 Consecutive Dialing - Attendant C-33 C-33 Consecutive Dialing - Attendant General Description This feature gives the ATTENDANT CONSOLE [A-3] the ability to generate DTMF signals while engaged in astation/trunk connection. These DTMF ...

Page 262 - Called Number Display - Attendant

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 219 Called Number Display - Attendant C-59 C-59 Called Number Display - Attendant General Description If a call is transferred to the ATTENDANT CONSOLE [A-3] as a result of: DO NOT DISTURB [D-11] CALL FORWARDING - ALL CALLS [C-5] CALL FO...

Page 263 - for which this multi-line is the MY Line.; To monitor from a D; MY Line

NEAX2400 IPX Feature Programming Manual Page 220 NDA-24297, Issue 1 C-60 Call Forwarding - Busy Line - Outside C-60 Call Forwarding - Busy Line - Outside General Description This feature allows a call that originates from a station or trunk, and is destined for a station to be routed to anotherstati...

Page 264 - FORWARD CANCEL

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 221 Call Forwarding - Busy Line - Outside C-60 Operating Procedure (cont’d) To cancel from a multi-line D term 1. Press the multi-line key of the station to which CALL FORWARDING - BUSY LINE-OUTSIDE is to becancelled. 2. Lift the handset...

Page 267 - Consecutive Speed Calling - System; Dial the 4 digit telephone number. The call is completed.

NEAX2400 IPX Feature Programming Manual Page 224 NDA-24297, Issue 1 C-62 Consecutive Speed Calling - System C-62 Consecutive Speed Calling - System General Description This feature allows a user to call frequently dialed DID numbers using fewer digits (abbreviated call codes) thanwould normally be r...

Page 268 - digits

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 225 Consecutive Speed Calling - System C-62 Programming (cont’d) STEP 3: ASPA - Assign an access code to SPEED CALLING-SYSTEM, assign SRV = SSC (Service Code), SID = 15. Program for Normal (N). NND = Access code plus Abbreviated Digit Co...

Page 269 - Call Forwarding - All Calls - Announcement; ANNOUNCEMENT SERVICE

NEAX2400 IPX Feature Programming Manual Page 226 NDA-24297, Issue 1 C-69 Call Forwarding - All Calls - Announcement C-69 Call Forwarding - All Calls - Announcement General Description This feature permits all calls destined for a particular station to be routed to a recorded announcement. Activation...

Page 270 - Call Forwarding-All Calls; This command is used for assigning the function for each soft key.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 227 Call Forwarding - All Calls - Announcement C-69 Service Conditions (cont’d) 10. This service feature is available with the following connections: DIRECT INWARD DIALING (DID [D-8] DIRECT-IN TERMINATION (DIT) [D-7] STATION-TO-STATION C...

Page 271 - - Assign the Make Idle status to the announcement trunk.

NEAX2400 IPX Feature Programming Manual Page 228 NDA-24297, Issue 1 C-69 Call Forwarding - All Calls - Announcement Programming (cont’d) STEP 4: ATRK - Assign the LENs. Announcement Trunk Route Number, Trunk Number, and Tenant Number. Assign one or more trunks to a specific route used to connect to ...

Page 272 - - These data must be assigned to the NCN.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 229 Call Back - Delayed C-73 C-73 Call Back - Delayed General Description This feature allows a station to which CALL BACK [C-1] has been set to initiate another call, within apredetermined time period after becoming idle and before the ...

Page 273 - to which the call is forwarded.

NEAX2400 IPX Feature Programming Manual Page 230 NDA-24297, Issue 1 C-74 Call Forwarding - Don’t Answer - Outside C-74 Call Forwarding - Don’t Answer - Outside General Description This feature allows a call which originates from a station or trunk, and is destined for a station, to be routed to anot...

Page 275 - See CALL FORWARDING-DON’T ANSWER

NEAX2400 IPX Feature Programming Manual Page 232 NDA-24297, Issue 1 C-74 Call Forwarding - Don’t Answer - Outside Service Conditions (cont’d) b.) When originating a call from a trunk: Restriction for tandem connections between the incoming trunk and the outgoing trunk selected for the call where thi...

Page 278 - Call Waiting Lamp - UCD

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 235 Call Waiting Lamp - UCD C-76 C-76 Call Waiting Lamp - UCD General Description This feature uses an LED indication, which is one of the programmable keys on the D term , to indicate when a call is waiting to be answered in the UCD que...

Page 279 - calls in UCD queue before the UCD Call Waiting Lamp flashes.

NEAX2400 IPX Feature Programming Manual Page 236 NDA-24297, Issue 1 C-76 Call Waiting Lamp - UCD Interactions (cont’d) 6. If OVERFLOW-UCD [O-13] is programmed, overflow to the second group will take place if all stationsin the first group are either busy or in the busy-out state. There will be no CA...

Page 281 - Call Forwarding - I’m Here; To set from the target station

NEAX2400 IPX Feature Programming Manual Page 238 NDA-24297, Issue 1 C-81 Call Forwarding - I’m Here C-81 Call Forwarding - I’m Here General Description This service feature permits the CALL FORWARDING - ALL CALLS feature to be set/cancelled from the targetstation. Operating Procedure To set from the...

Page 282 - HERE can be set or cancelled from a sub line of a D; . At that time, the transferred call terminates to the; that sets the service.; - Reserve a number level for feature access and cancel.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 239 Call Forwarding - I’m Here C-81 Service Conditions (cont’d) 12. When using the FCCS network, if the destination (target station) is a D term , CALL FORWARDING - I’M HERE can be set or cancelled from a sub line of a D term . At that t...

Page 283 - and SFI 100 (Forwarded destination for Call Forwarding - I’m here)

NEAX2400 IPX Feature Programming Manual Page 240 NDA-24297, Issue 1 C-81 Call Forwarding - I’m Here FCCS Programming (cont’d) SYS1, Index 5, b1~3. Maximum number of Multiple Call Forwarding - All Calls/Busy Lineoccurrences: Note: This data is valid when SYS-1, Index 69, bit 7 is assigned as “1”. SYS...

Page 284 - Centrex Compatibility; Compatibility; ADSL

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 241 Centrex Compatibility C-109 C-109 Centrex Compatibility General Description This feature allows a DTMF type telephone user engaged in a trunk call to send a hooking signal to the called office,enabling the call to be transferred to a...

Page 285 - Call Forwarding - Don’t Answer To UCD Queue; C-133 Call Forwarding - Don’t Answer To UCD Queue; ANSWER to a UCD group.

NEAX2400 IPX Feature Programming Manual Page 242 NDA-24297, Issue 1 C-133 Call Forwarding - Don’t Answer To UCD Queue C-133 Call Forwarding - Don’t Answer To UCD Queue General Description This feature allows calls to a station that has set CALL FORWARDING-DON'T ANSWER to a UNIFORM CALLDISTRIBUTION g...

Page 286 - Call Hold - Conference; To operate from a D; To operate from other D; To operate from an analog station

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 243 Call Hold - Conference C-146 C-146 Call Hold - Conference General Description This feature allows a user to establish a conference connection by adding a third party who is held on a multiline ofa D term to the existing two-party con...

Page 287 - Data communications are not considered in this service.

NEAX2400 IPX Feature Programming Manual Page 244 NDA-24297, Issue 1 C-146 Call Hold - Conference Service Conditions (cont’d) 6. This service is available when the parties (A), (C), the lines (A) and (B) are the following: a.) interoffice trunk (including ISDN line)b.) C.O. line/tie linec.) station, ...

Page 288 - Call Block; Block; Using Access Code

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 245 Call Block C-150 C-150 Call Block General Description This feature is a part of Caller ID service. This feature restricts termination of incoming calls from the preassignedcalling numbers. This feature is available by designating the...

Page 289 - To set the Restriction Number by dialing an optional number; 4 digit display of D; Series E; The latest incoming call

NEAX2400 IPX Feature Programming Manual Page 246 NDA-24297, Issue 1 C-150 Call Block Operating Procedure (cont’d) To set the Restriction Number by dialing an optional number 1. Lift the handset. 2. Press the CALL BLOCK key. 3. Receive special dial tone. 4. Dial number to be restricted. 5. Receive se...

Page 290 - When the Restriction Number is registered by the MAT; CIRCUIT CARD NAME; The registered number is; CALL BLOCK

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 247 Call Block C-150 Operating Procedure (cont’d) • When confirming the Restriction Number: • When HELP Key for CALL BLOCK of Soft key is pressed: Service Conditions When the Restriction Number is registered by the MAT 1. When the callin...

Page 294 - ADKS

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 251 Call Block C-150 Programming (cont’d) STEP 5: ADSL - Assign the soft key data of Call Block for D term according to the following parameter: SKP = 0-15 (Soft Key Pattern) SN = 0, 1, 4 (Call Situation Number)SKN = 1-16 (Soft Key Numbe...

Page 295 - Call Return; Return; Automatic Saving; The maximum number of calling numbers stored for the D; The dialed number is not deleted.

NEAX2400 IPX Feature Programming Manual Page 252 NDA-24297, Issue 1 C-151 Call Return C-151 Call Return General Description This feature allows the D term or an analog station to save the received calling number and the received number of the station. The following two types of saving features are a...

Page 296 - Manual Saving (equal to SAVE AND REPEAT - D; , the saved calling number is overwritten.; The dialed number is automatically deleted and the S&R key goes off.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 253 Call Return C-151 Operating Procedure (cont’d) Manual Saving (equal to SAVE AND REPEAT - D term [S-24D] 1. Saving Calling Number a.) Press the S&R key while in conversation using My Line or Sub Line.b.) The received calling numbe...

Page 299 - Also, for an incoming call from CCIS line, this data is required.

NEAX2400 IPX Feature Programming Manual Page 256 NDA-24297, Issue 1 C-151 Call Return Service Conditions (cont’d) 8. Service Conditions for Automatic Saving with the access code: a.) This service is available for the telephone corresponding with Caller-ID service. Equips Caller ID function or the te...

Page 300 - Call Hold Pick Up; Make a trunk or station call to Station A.; Only stations in the same tenant can use this feature.; - Assign Service Feature Class that allows SFI = 150

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 257 Call Hold Pick Up C-154 C-154 Call Hold Pick Up General Description This feature allows a user to pick up a trunk or station call that is put on hold by a second user. The user canaccomplish this by dialing an access code followed by...

Page 301 - Calling Party Number - Name Assignment and Display; C-157 Calling Party Number - Name Assignment and; and the; from the trunk received the; The assigned name cannot be output to the SMDR expanded area.

NEAX2400 IPX Feature Programming Manual Page 258 NDA-24297, Issue 1 C-157 Calling Party Number - Name Assignment and Display C-157 Calling Party Number - Name Assignment and Display General Description This feature allows a user to assign the desired name for the calling number, which is provided by...

Page 302 - The Display patterns are shown below:; to which the called line is assigned as a sub line, the; 4-digit Assigned name

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 259 Calling Party Number - Name Assignment and Display C-157 Service Conditions (cont’d) 12. The Display patterns are shown below: 13. Characters of 8-bit ASCII can be displayed for this feature. 14. When the feature key which assigned F...

Page 303 - ACID

NEAX2400 IPX Feature Programming Manual Page 260 NDA-24297, Issue 1 C-157 Calling Party Number - Name Assignment and Display Service Conditions (cont’d) 18. The trunk mentioned below is available as for analog COT: 19. When this feature is activated via FCCS, the same data should be set to all nodes...

Page 304 - Call Trace; Trace; Dialing Access Code

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 261 Call Trace C-160 C-160 Call Trace General Description This feature enables the output of System Message [26-R], that gives information on a malicious call (kind of call,number of calling terminal, etc.) originated from a station/trun...

Page 305 - Details on LCD display (for the D; 4 digits display of a D; When the CALL TRACE is set:; This feature can be activated by analog or D; Because a D; blank

NEAX2400 IPX Feature Programming Manual Page 262 NDA-24297, Issue 1 C-160 Call Trace Operating Procedure (cont’d) Note: Details on LCD display (for the D term Series E only) are as follows: 24 digits display of a D term Series E • When the CALL TRACE is set: • When the CALL TRACE is assigned to the ...

Page 308 - Consultation Hold Release

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 265 Consultation Hold Release C-169 C-169 Consultation Hold Release General Description This feature enables a station, connecting to a second call while the station has been holding (consultation hold) anoriginal call (including ADD-ON ...

Page 310 - See General Description.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 267 Consultation Hold Release C-169 General Description (cont’d) Operating Procedure See General Description. Service Conditions 1. This feature is available when System Data 1 Index 803 Bit 1 = 1 is assigned. 2. When there is a call ter...

Page 311 - A D; When assigning DISC key to soft key, DISC is displayed on a LCD of D; . HELP for DISC key is as; - when assigning DISC key to soft key

NEAX2400 IPX Feature Programming Manual Page 268 NDA-24297, Issue 1 C-169 Consultation Hold Release Service Conditions (cont’d) 4. A station assigned EMERGENCY CALL [3-11] (SFI = 24) cannot be applied to operating station of thisfeature. 5. The DISC key used for this feature can be assigned by FKY =...

Page 312 - Dial Access To Attendant; To access the Attendant; equivalent to a station number.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 269 Dial Access To Attendant D-2 D-2 Dial Access To Attendant General Description This feature allows a user to access the ATTENDANT CONSOLE [A-3] by dialing the operator call code. Operating Procedure To access the Attendant 1. The user...

Page 313 - ASPAL; - This data must be assigned to the node calling the attendant.

NEAX2400 IPX Feature Programming Manual Page 270 NDA-24297, Issue 1 D-2 Dial Access To Attendant FCCS Programming This data setting describes only the additional or replacement commands used to activate FCCSservices. When used as an FCCS feature, these commands replace the non-network commands (fore...

Page 314 - Dictation Access; Dial the DICTATION ACCESS code.; One trunk circuit is required for each DICTATION ACCESS.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 271 Dictation Access D-3 D-3 Dictation Access General Description This feature permits users dial access to customer provided dictation equipment, and in some instances allows themto maintain telephone dial control of normal dictation sy...

Page 315 - NND in accordance with a predetermined numbering plan.

NEAX2400 IPX Feature Programming Manual Page 272 NDA-24297, Issue 1 D-3 Dictation Access Interactions (cont’d) 4. If the station side is used to connect DICTATION ACCESS, STATION HUNTING [S-7, 8, 9] willprovide capabilities to connect multiple dictation machines to the system. Programming STEP 1: AN...

Page 316 - Digital Display - Station

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 273 Digital Display - Station D-5 D-5 Digital Display - Station General Description This feature provides the Attendant with a visual display (via the ATTENDANT CONSOLE [A-3]) of the telephonenumber, its Trunk Route Restriction, CLASS OF...

Page 317 - HEX - Station Information

NEAX2400 IPX Feature Programming Manual Page 274 NDA-24297, Issue 1 D-5 Digital Display - Station Service Conditions (cont’d) Example 2: 2-digit TENANT [T-12] number, 4-digit telephone number. Example 3: 2-digit Trunk Route Restriction Class, 4-digit telephone number. Example 4: Single digit TENANT ...

Page 318 - Digital Display - Trunk

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 275 Digital Display - Trunk D-6 D-6 Digital Display - Trunk General Description This feature provides the Attendant with a visual indication of incoming and outgoing trunk calls on theATTENDANT CONSOLE [A-3]. Trunk identification number,...

Page 319 - Route and Trunk Number; - Each trunk must be assigned a Central Office code.

NEAX2400 IPX Feature Programming Manual Page 276 NDA-24297, Issue 1 D-6 Digital Display - Trunk Service Conditions (cont’d) d.) an outgoing C.O. (DOD, WATS, FX) type call.e.) an outgoing TIE Line call or re-enters a held trunk call. 7. An Attendant Console also indicates the C.O. code assigned by sy...

Page 320 - This service can be activated in system data.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 277 Direct-In Termination (DIT) D-7 D-7 Direct-In Termination (DIT) General Description This feature automatically routes incoming public network calls directly to a pre-selected station without Attendantassistance. The call can then be ...

Page 321 - The DIRECT-IN TERMINATION trunk is limited to the following types:; - Assign the Make Idle status to the DIT trunk.

NEAX2400 IPX Feature Programming Manual Page 278 NDA-24297, Issue 1 D-7 Direct-In Termination (DIT) Service Conditions (cont’d) 17. When activating this feature via the FCCS network, when the telephone number of the destination stationis deleted: a.) When the Attendant Console is used, the DIT call ...

Page 323 - DID is also frequently referred to as CENTREX service.

NEAX2400 IPX Feature Programming Manual Page 280 NDA-24297, Issue 1 D-8 Direct Inward Dialing (DID) D-8 Direct Inward Dialing (DID) General Description This feature provides for all incoming calls from the public network (except FX or WATS) to reach any systemstation without Attendant assistance. Op...

Page 324 - options regarding length of station numbering. Assign data 1FH.; - Assign the DIRECT INWARD DIALING route as shown below:

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 281 Direct Inward Dialing (DID) D-8 Programming STEP 1: ASYD - System Data 1, Index 16, Bit 3. Enable the 4-digit station number. It is normal to enable all options regarding length of station numbering. Assign data 1FH. System Data 1, I...

Page 325 - To place an outside call; Receive second dial tone from Central Office,; preselected trunk groups.

NEAX2400 IPX Feature Programming Manual Page 282 NDA-24297, Issue 1 D-9 Direct Outward Dialing (DOD) D-9 Direct Outward Dialing (DOD) General Description This feature permits any user to gain access to the public network without the assistance of the Attendant, by dialingan access code and receiving...

Page 326 - Assign NND in accordance with a predetermined numbering scheme.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 283 Direct Outward Dialing (DOD) D-9 Programming STEP 1: ASYD - System Data 1, Index 65. Assign the number of routes in the system. STEP 2: ANPD - Reserve a number level for outgoing trunk access. Assign for Normal (N) and Hooking (H). A...

Page 327 - Distinctive Ringing; Ringing; Ringing Patterns; Ringing for Incoming Internal Call; Ringing for Incoming External Call:

NEAX2400 IPX Feature Programming Manual Page 284 NDA-24297, Issue 1 D-10 Distinctive Ringing D-10 Distinctive Ringing General Description This feature provides distinctive station ringing patterns so that the user can distinguish between internal andexternal incoming calls. Operating Procedure No ma...

Page 328 - s will not respond to this; TYPE OF TRANSFERRED STATION; Analog Telephone

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 285 Distinctive Ringing D-10 Interactions (cont’d) 2. CONSULTATION HOLD [C-17]: Station A places Party B on CONSULTATION HOLD [C-17] andcalls Station C. If Party B is a trunk, Station C hears DISTINCTIVE RINGING for a trunk call. If Part...

Page 329 - REST

NEAX2400 IPX Feature Programming Manual Page 286 NDA-24297, Issue 1 D-11D Do Not Disturb - D term D-11D Do Not Disturb - D term General Description This feature allows a user to establish DO NOT DISTURB status. Incoming calls will be denied access to MY Line,while DO NOT DISTURB status is in effect....

Page 331 - This feature provides for dialed digits to appear on the D; LAST NUMBER CALLED - D

NEAX2400 IPX Feature Programming Manual Page 288 NDA-24297, Issue 1 D-13D Dial Monitor - D term D-13D Dial Monitor - D term General Description This feature provides for dialed digits to appear on the D term LCD display. Operating Procedure 1. Lift the handset or press the SPEAKER key; receive dial ...

Page 332 - Day/Night Class of Service

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 289 Day/Night Class of Service D-15 D-15 Day/Night Class of Service General Description This feature permits any station to be assigned one CLASS OF SERVICE - INDIVIDUAL [C-15], for day andanother for night. System data can be programmed...

Page 335 - Direct Digital Interface; Each office hierarchy is defined as follows:

NEAX2400 IPX Feature Programming Manual Page 292 NDA-24297, Issue 1 D-16 Direct Digital Interface D-16 Direct Digital Interface General Description This service feature provides the capability to connect trunks from the NEAX2400 IPX directly to “T1” carrier linksvia either private or public network....

Page 336 - Network Clocking Hierarchy

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 293 Direct Digital Interface D-16 Service Conditions (cont’d) b.) Sub-Source Office: This office operates using a Phase Lock Oscillator (PLO) to synchronize with the clock at the Source Office. If the Source Clock has some failure, offic...

Page 337 - Network Clock Synchronization

NEAX2400 IPX Feature Programming Manual Page 294 NDA-24297, Issue 1 D-16 Direct Digital Interface Service Conditions (cont’d) Network Clock Synchronization Programming STEP 1: ASYD - System Data 1, Index 91, Bits 4-7. If one Phase Lock Oscillator (PLO) is mounted, assign data “1” to Bits 4 and 6. If...

Page 339 - Delay Announcement - UCD; Time Chart for Single and Repeated Announcement

NEAX2400 IPX Feature Programming Manual Page 296 NDA-24297, Issue 1 D-31 Delay Announcement - UCD D-31 Delay Announcement - UCD General Description This feature provides recorded announcement service for an incoming call directed to a busy UNIFORM CALLDISTRIBUTION (UCD) [U-1] group and placed in a w...

Page 342 - To place a call in a DUAL HOLD-D; condition

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 299 Dual Hold - D term D-32D D-32D Dual Hold - D term General Description This feature allows two D term s to simultaneously be placed on hold. This allows the held parties to answer or originate a call from a subline appearance or the i...

Page 343 - BUSY VERIFICATION

NEAX2400 IPX Feature Programming Manual Page 300 NDA-24297, Issue 1 D-32D Dual Hold - D term Service Conditions (cont’d) BUSY VERIFICATION [B-3] ATTENDANT CAMP-ON [A-1] EXECUTIVE RIGHT-OF-WAY [E-1] CALL WAITING-ORIGINATING [C-31] CALL WAITING-TERMINATING [C-12] Programming ASYD - System Data 1, Inde...

Page 344 - This feature gives multiple D; To originate; If Intercom Bridge service is denied, the D

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 301 Dial Intercom D-87 D-87 Dial Intercom General Description This feature gives multiple D term users the ability to simultaneously call any other member of the intercom group, regardless of their idle or busy status. An intercom group ...

Page 345 - Dial Intercom; RINGING

NEAX2400 IPX Feature Programming Manual Page 302 NDA-24297, Issue 1 D-87 Dial Intercom Operating Procedure (cont’d) PRIME LINE PICK UP-D term [P-13D] The D term may be programmed to seize the incoming call on the AUTOMATIC, MANUAL, or DIAL INTERCOM lines before the Prime Line. If two incoming calls ...

Page 346 - The display on the D; flashing

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 303 Dial Intercom D-87 Service Conditions (cont’d) 16. The display on the D term is as follows: a.) Calling b.) Called Station Answers ICM XX (Time Display) Dial Intercom Number of the Calling Station* Display appears for 10 seconds when...

Page 347 - display

NEAX2400 IPX Feature Programming Manual Page 304 NDA-24297, Issue 1 D-87 Dial Intercom Service Conditions (cont’d) c.) Intercom Bridge d.) Intercom Bridge Restriction 17. To answer a call terminated to the INTERCOM line while the Prime Line is busy, press an INTERCOMline key. 18. The DIAL INTERCOM r...

Page 349 - This feature allows a D; to receive an incoming ringing signal after a predetermined time.

NEAX2400 IPX Feature Programming Manual Page 306 NDA-24297, Issue 1 D-90D Delayed Ringing - D term D-90D Delayed Ringing - D term General Description This feature allows a D term to receive an incoming ringing signal after a predetermined time. In Boss/Secretary service, a call terminating on the bo...

Page 352 - PL TN STN:Prime Line Tenant and Station Number

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 309 Delayed Ringing - D term D-90D Programming AKYD - Assign the following parameters to stations that will have delayed ringing: TN: Tenant Number STN: Station Number TP: Type of D term : 0/1 RING: 0: No Ringing 1: Ringing All Lines2: R...

Page 353 - Delay Announcement - Attendant; When the announcement service is provided after a fixed time; This feature is available for the following incoming trunk types:

NEAX2400 IPX Feature Programming Manual Page 310 NDA-24297, Issue 1 D-114 Delay Announcement - Attendant D-114 Delay Announcement - Attendant General Description This feature provides a recorded announcement to the incoming trunk caller waiting to be answered by theAttendant. This feature is divided...

Page 354 - In case of multiple connection:

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 311 Delay Announcement - Attendant D-114 Service Conditions (cont’d) 5. At the time of DAY/NIGHT mode changeover, the call connected to the announcement will be released,and the calling party receives reorder tone. A call will be release...

Page 355 - The maximum programmable channels of DAT for this feature are:; DAY/NIGHT MODE CHANGE

NEAX2400 IPX Feature Programming Manual Page 312 NDA-24297, Issue 1 D-114 Delay Announcement - Attendant Service Conditions (cont’d) 5. When Multiple Playback is selected, additional DAT channel is required for the second announcement,even if the second announcement has the same contents as the firs...

Page 358 - To originate a call using SPEED CALLING - ONE TOUCH

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 315 Direct Station Selection (DSS) Console D-149 D-149 Direct Station Selection (DSS) Console General Description A Direct Station Selection (DSS) Console may be connected to each D term . The DSS keys can be used as line keys or feature...

Page 359 - The DSS console and the connected D; may be accommodated in the different circuit card, but should; ADM Function

NEAX2400 IPX Feature Programming Manual Page 316 NDA-24297, Issue 1 D-149 Direct Station Selection (DSS) Console Service Conditions (cont’d) 6. When the user calls the DSS station by SPEED CALLING - ONE TOUCH, or transfers the call to the DSSstation, and the DSS station is the member of the UCD [U-1...

Page 360 - can be used when using the DSS console in the ADM mode.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 317 Direct Station Selection (DSS) Console D-149 Service Conditions (cont’d) 3. The 48th key and after can be used only as the feature keys, not as the line keys. (These keys do not havethe green lamps, therefore, I-used or I-hold cannot...

Page 362 - desired station number (maximum five digits); DSS Key Assignment for DSS/BLF; Example of Data Programming for DSS/BLF

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 319 Direct Station Selection (DSS) Console D-149 Programming (cont’d) KYN: 10-39KYI: 2 (= Multi Line) KD: 2 (= For DSS Console Key) TN: X STN: XXXXX desired station number (maximum five digits) DSS Key Assignment for DSS/BLF Example of D...

Page 367 - DSS Key Assignment for Add-On Module; Example of Data Programming for Add-On Module

NEAX2400 IPX Feature Programming Manual Page 324 NDA-24297, Issue 1 D-149 Direct Station Selection (DSS) Console Programming (cont’d) DSS Key Assignment for Add-On Module Example of Data Programming for Add-On Module ASDT Note: *0=Even-numbered LEN level / **1=Odd-numbered LEN level. TENANT NUMBER (...

Page 370 - Distinctive Ringing - Caller ID; FAX Ringer overrides this feature.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 327 Distinctive Ringing - Caller ID D-153 D-153 Distinctive Ringing - Caller ID General Description This feature is a part of CALLER ID service. This feature provides a distinctive ringing pattern (0, 1, 5, 6 or 7)according to the receiv...

Page 372 - Dual Station Call; If the call is abandoned, both D

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 329 Dual Station Call D-156 D-156 Dual Station Call General Description This feature allows a user to simultaneously call two stations (referred as a Main Station and Sub Station), whichare accommodated in two different nodes within an F...

Page 375 - - Assign the related data of Dual Station Call.

NEAX2400 IPX Feature Programming Manual Page 332 NDA-24297, Issue 1 D-156 Dual Station Call Interactions (cont’d) 8. When a calling party sets VOICE CALL [V-2] or performs switch hook flash while calling a Main Stationand Sub Station, the Sub Station stops ringing. 9. This service is not activated w...

Page 376 - = Page Change key appears on the feature key

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 333 Dual Station Call D-156 Programming (cont’d) STEP 5: ADKS - Assign the B-MV key to the soft key of each station. Note TN (tenant number), STN (station number) SKP (soft key pattern): 1~15 LKP (Key Pattern Data): 1=16 Line/Feature but...

Page 377 - To enter a busy connection

NEAX2400 IPX Feature Programming Manual Page 334 NDA-24297, Issue 1 E-1 Executive Right-of-Way E-1 Executive Right-of-Way General Description This feature enables selected users, upon encountering a busy condition at an internal station, to bridge into the busyconnection. Operating Procedure To ente...

Page 379 - To enter a busy connection from a D; Interrupted Party Called Party; OVERRIDE XXXX

NEAX2400 IPX Feature Programming Manual Page 336 NDA-24297, Issue 1 E-1D Executive Right-of-Way - D term E-1D Executive Right-of-Way - D term General Description This feature enables selected D term users, upon encountering a busy condition at an internal station, to bridge into the busy connection ...

Page 380 - OUTGOING TRUNK QUEUING; Data Call through Data Adapter / Data Call through Data Module

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 337 Executive Right-of-Way - D term E-1D Service Conditions (cont’d) EXCLUSIVE HOLD - D term [E-4D] NON-EXCLUSIVE HOLD - D term [N-7D] OFF-HOOK QUEUING [O-7, O-11] OUTGOING TRUNK QUEUING [O-2, O-2D] PRIVACY - D term [P-14D] PRIVACY RELEA...

Page 382 - This feature provides an LCD display of the time elapsed while a D; is connected to any trunk.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 339 Elapsed Time Display - D term E-3D E-3D Elapsed Time Display - D term General Description This feature provides an LCD display of the time elapsed while a D term is connected to any trunk. Operating Procedure No manual operation is r...

Page 383 - While a call is in progress; Held Station or Trunk

NEAX2400 IPX Feature Programming Manual Page 340 NDA-24297, Issue 1 E-4D Exclusive Hold - D term E-4D Exclusive Hold - D term General Description This service feature allows a user to place a call on hold and to exclude all other users from retrieving the held call. Operating Procedure While a call ...

Page 384 - Emergency Call; Call

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 341 Emergency Call E-11 E-11 Emergency Call General Description This feature allows a user to make an EMERGENCY CALL by dialing a special telephone number (emergencytelephone number). Even if the calling station goes on-hook, the calling...

Page 385 - . Stations that may call the emergency call telephone are

NEAX2400 IPX Feature Programming Manual Page 342 NDA-24297, Issue 1 E-11 Emergency Call Service Conditions (cont’d) 13. When the emergency station is busy, CALL BACK [C-1] to the emergency station is effective (no printoutis performed). 14. When the emergency station is busy, CALL WAITING - ORIGINAT...

Page 386 - E911-ANI Unified Number Of Digits; ANI sending number by this enhanced service is NXX-XXXX.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 343 E911-ANI Unified Number Of Digits E-18 E-18 E911-ANI Unified Number Of Digits General Description This service unifies the number of ANI information digits sent out by E911-ANI service. Operating Procedure The operating procedure is ...

Page 388 - Expanded Multiple Line Operation - D; My Line, accommodated on this card, and the

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 345 Expanded Multiple Line Operation - D term E-26 E-26 Expanded Multiple Line Operation - D term General Description This feature allows operation of whichever lines from ELC card(s) in the same IMG or in different IMGs in the samenode,...

Page 390 - Boss-Secretary features are not available via ISW.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 347 Expanded Multiple Line Operation - D term E-26 Interactions (cont’d) Serial Call [S-15] Serial Call - Loop Release [S-64] Serial Call - CCIS [S-52] Serial Call - D term [S-127] Executive Right-of-Way [E-1, 1D] Call Back [C-1, 1D] Mes...

Page 391 - Flexible Numbering of Stations

NEAX2400 IPX Feature Programming Manual Page 348 NDA-24297, Issue 1 F-1 Flexible Numbering of Stations F-1 Flexible Numbering of Stations General Description This feature provides the ability to assign telephone numbers of the voice station and data station to anycorresponding instrument location, d...

Page 392 - FOR STATION 31

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 349 Flexible Numbering of Stations F-1 Programming (cont’d) STEP 3: ASPA - Assign the station numbering in such a way that the system will differentiate the station numbering via the access codes programmed here. The following data is pr...

Page 393 - FX Access; To place an outgoing FX call from a station

NEAX2400 IPX Feature Programming Manual Page 350 NDA-24297, Issue 1 F-2 FX Access F-2 FX Access General Description This feature provides dial access to distant Central Offices using Foreign Exchange (FX) trunks. All incoming callsto the NEAX2400 IPX from the FX Central Office area are placed to the...

Page 394 - - Assign the FX ACCESS route as shown below:

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 351 FX Access F-2 Interactions (cont’d) 6. When the system is in the night mode of operation, incoming FX calls can be answered using NIGHTCONNECTION - FIXED [N-1], FLEXIBLE [N-2] or TRUNK ANSWER FROM ANY STATION [T-8]feature. 7. DIRECT ...

Page 395 - When activating features common to both D; and single-line sets

NEAX2400 IPX Feature Programming Manual Page 352 NDA-24297, Issue 1 F-3D Flash Button - D term F-3D Flash Button - D term General Description This feature provides for a D term set to program one of the programmable line/feature keys to function as a FLASH BUTTON. The FLASH BUTTON will function in t...

Page 396 - This command is used for assigning the function to each soft key.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 353 Flash Button - D term F-3D Programming (cont’d) STEP 2: ADSL - SN=5 (Consultation Hold) and FKY=21 (Flash Button; FLASH). This command is used for assigning the function to each soft key.

Page 397 - To add a flash to a stored SPEED CALLING-ONE TOUCH-D; Press the Feature key and the SPEED CALLING-ONE TOUCH-D; either be blank or a display of previously stored digits.; A FLASH ENTRY may be entered only as a first digit. For example:; SPEED SET

NEAX2400 IPX Feature Programming Manual Page 354 NDA-24297, Issue 1 F-4D Flash Entry - D term F-4D Flash Entry - D term General Description This feature allows a D term user to insert a switch hook flash as the first digit in a stored SPEED CALLING-ONE TOUCH-D term [S-26D] number. Operating Procedur...

Page 398 - This is a D

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 355 Flash Entry - D term F-4D Interactions Refer to the NEAX2400 IPX Office Data Specification, ASYD, System Data 3, Index 2 for programming thecharacteristics of a switch hook. Programming This is a D term feature. It is inherent to the...

Page 401 - Faulty Trunk Report; Trunk; To enter; Dial the FAULTY TRUNK REPORT access code receive service set tone.

NEAX2400 IPX Feature Programming Manual Page 358 NDA-24297, Issue 1 F-6 Faulty Trunk Report F-6 Faulty Trunk Report General Description This feature allows a station to report a noisy or faulty trunk number by dialing a special access code before hangingup. The FAULTY TRUNK REPORT consists of a trun...

Page 402 - Forced Account Code; The FORCED ACCOUNT CODE can be masked on the D; display if necessary using the AUTHORIZATION; When dialing an outgoing call; Enter the access code receive service set tone.; Capacity depends on system configuration.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 359 Forced Account Code F-7 F-7 Forced Account Code General Description This feature is a variation of the ACCOUNT CODE [A-18] feature, which makes it mandatory to enter anACCOUNT CODE (up to 10 digits) for all outgoing calls. The accoun...

Page 403 - user initiates the LAST NUMBER CALL-D; 4 are ignored regardless of their assignments.

NEAX2400 IPX Feature Programming Manual Page 360 NDA-24297, Issue 1 F-7 Forced Account Code Service Conditions (cont’d) Note: There are two methods of FORCED ACCOUNT CODE assignment. These methods are FullImplementation and the Check Sum method. In the Full Implementation method, the whole FORCEDACC...

Page 405 - ) or denies access to routes on a Direct Dial Access, RRI

NEAX2400 IPX Feature Programming Manual Page 362 NDA-24297, Issue 1 F-7 Forced Account Code Programming (cont’d) Note: Digits 39 determined by the Check Sum method will be unique to the FORCED ACCOUNT CODE 26428.In other words, 26428 will not be followed by any digits other than 39. System Data 1, I...

Page 406 - Flexible Assignment of Function Buttons; This feature allows D; A feature button cannot be used as a line button.; Flex Key Assignment Example:

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 363 Flexible Assignment of Function Buttons F-17 F-17 Flexible Assignment of Function Buttons General Description This feature allows D term function (feature) buttons (REDIAL, FEATURE, SPEAKER, CONF, ANSWER, RECALL, HOLD, and TRANSFER) ...

Page 407 - Follow Phone; Phone; Station data change notice.; Replace the handset the service will be activated.; To confirm; This service is available for the following telephone class:; This service is available between the same type of terminals.; SWAP OK

NEAX2400 IPX Feature Programming Manual Page 364 NDA-24297, Issue 1 F-31 Follow Phone F-31 Follow Phone General Description This feature allows individual station data of a terminal to be exchanged with another without the assistance ofMAT. The result of the exchange is printed out in the system mes...

Page 408 - The service is available after the message is cancelled.; ITEM

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 365 Follow Phone F-31 Service Conditions (cont’d) 5. Following data assigned to each D term will be cleared when this service is activated: DO NOT DISTURB [D-11] LAST NUMBER CALL [L-6] MESSAGE REMINDER [M-19] SAVE AND REPEAT [S-24] 6. Th...

Page 410 - The DSS Console data does not swap. The My Line of the connected D; This service is restricted for a D; using Expanded Multiple Line Operation - D

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 367 Follow Phone F-31 Service Conditions (cont’d) 20. When activating this service, swap of the Speed Calling - One Touch key data start upon replacement ofthe handset. It takes approximately 42 seconds for the Speed Calling key data to ...

Page 411 - Flexible Routing - FCCS; Available when CCIS is activated in the network.

NEAX2400 IPX Feature Programming Manual Page 368 NDA-24297, Issue 1 F-35 Flexible Routing - FCCS F-35 Flexible Routing - FCCS General Description With this feature, an FCCS trunk call can automatically be routed via a non-FCCS trunk (C.O. or Tie Line), if allthe FCCS trunks are busy or a Data Link F...

Page 412 - The display is changed depending on the specification of ACIS.; Programming / FCCS Programming

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 369 Flexible Routing - FCCS F-35 Interactions (cont’d) Note 3: The display is changed depending on the specification of ACIS. Note 4: Has priority over the FLEXIBLE ROUTING - FCCS service. FLEXIBLE ROUTING - FCCS is activatedonly when th...

Page 413 - FCCS Networking via IP; Connection via Cisco router:

NEAX2400 IPX Feature Programming Manual Page 370 NDA-24297, Issue 1 F-36 FCCS Networking via IP F-36 FCCS Networking via IP General Description This feature allows the system to exchange both speech and FCCS signals over Internet/Intranet. To establish/release a call, the following two connection pa...

Page 414 - FCCS over IPTRK

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 371 FCCS Networking via IP F-36 Operating Procedure No manual operation is required. Service Conditions FCCS over IPTRK 1. To send/receive voice information, each node shall use IPTRK circuit card(s). At this time, the IPTRKcards in the ...

Page 415 - FROM FCCS OVER

NEAX2400 IPX Feature Programming Manual Page 372 NDA-24297, Issue 1 F-36 FCCS Networking via IP Service Conditions (cont’d) 10. IPTRK-related tandem connection is not available. 11. Any service not available on the FCCS network, is not available with this feature. 12. Tandem Path through function is...

Page 416 - FCCS via IP using Cisco router; The router applying to FCCS Networking via IP service must be used.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 373 FCCS Networking via IP F-36 Service Conditions (cont’d) FCCS via IP using Cisco router 1. DTI (1.5M and 2.0M) interface is used as speech channel. 2. The FCH-FGH card is used as a signal channel. Only a single FCH-FGH card can be con...

Page 419 - Group Calling; To initiate a group call; The call is completed.; To initiate a group call from a D; Maximum 10 Groups

NEAX2400 IPX Feature Programming Manual Page 376 NDA-24297, Issue 1 G-2 Group Calling G-2 Group Calling General Description This feature allows a user to dial certain frequently called stations within an NEAX2400 IPX group using an easilyremembered number. The same number can be assigned to differen...

Page 421 - Hotline; Station A lifts the handset.; There is no limit to the number of hotline stations.

NEAX2400 IPX Feature Programming Manual Page 378 NDA-24297, Issue 1 H-1 Hotline H-1 Hotline General Description This feature permits a pair of station sets to be associated with one another on an automatic ringdown basis. Operating Procedure 1. Station A lifts the handset. 2. Station B is rung. 3. S...

Page 423 - House Phone; The Attendant answers.

NEAX2400 IPX Feature Programming Manual Page 380 NDA-24297, Issue 1 H-2 House Phone H-2 House Phone General Description This feature allows selected stations to reach the ATTENDANT CONSOLE [A-1] by going off-hook. Operating Procedure To reach the ATTENDANT CONSOLE [A-1]: 1. The HOUSE PHONE user lift...

Page 425 - To dial a call HANDS-FREE

NEAX2400 IPX Feature Programming Manual Page 382 NDA-24297, Issue 1 H-5D Hands-free Dialing/Monitoring - D term H-5D Hands-free Dialing/Monitoring - D term General Description This feature allows the D term user to dial or monitor and call without lifting the handset. Operating Procedure To dial a c...

Page 426 - Outside; To place a HOTLINE - OUTSIDE call using a single-line telephone

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 383 Hotline - Outside H-9 H-9 Hotline - Outside General Description This feature allows a user to access an outside destination by going off-hook or selecting the HOTLINE-OUTSIDE[H-1] line/feature key and automatically dialing a SPEED CA...

Page 429 - Immediate Ringing

NEAX2400 IPX Feature Programming Manual Page 386 NDA-24297, Issue 1 I-1 Immediate Ringing I-1 Immediate Ringing General Description This feature causes called stations to ring immediately upon establishment of connections. Operating Procedure No manual operation is required. Service Conditions 1. Ri...

Page 430 - Incoming Call Identification

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 387 Incoming Call Identification I-2 I-2 Incoming Call Identification General Description This feature allows an ATTENDANT CONSOLE [A-3] to visually identify the type of service and/or trunk groupthat is arriving or waiting to be answere...

Page 432 - Incoming Central Office Call to Tie-Line Connection; Incoming Central Office Call to Tie-Line; To connect an incoming call

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 389 Incoming Central Office Call to Tie-Line Connection I-3 I-3 Incoming Central Office Call to Tie-Line Connection General Description This feature permits an Attendant to connect an incoming public network exchange call, via a TIE Line...

Page 433 - - Assign the Central Office route as shown below:

NEAX2400 IPX Feature Programming Manual Page 390 NDA-24297, Issue 1 I-3 Incoming Central Office Call to Tie-Line Connection Interactions (cont’d) 4. Stations must be allowed access to the routes they will need via the appropriate connection status, eithervia the Attendant Console (RRI 2) or Direct c...

Page 435 - Individual Trunk Access; If the trunk is idle, dial tone will be received.; Press an idle TKSL key.; If the trunk is busy, the Attendant will receive a busy tone.

NEAX2400 IPX Feature Programming Manual Page 392 NDA-24297, Issue 1 I-4 Individual Trunk Access I-4 Individual Trunk Access General Description This feature permits an Attendant to access an individual trunk within a trunk group via dial access at theATTENDANT CONSOLE [A-3]. Operating Procedure 1. P...

Page 436 - Optional

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 393 Individual Trunk Access I-4 Programming STEP 1: ASYD - System Data 1, Index 68, Bit 1. Designates the method the Attendant Console must use to operate INDIVIDUAL TRUNK ACCESS. 0/1: Route & Trunk Number/Listed Directory Number(Cen...

Page 437 - Inter-position Transfer; Transfer; To transfer a call from Attendant Console A to Attendant Console B; Attendant B presses the ANSWER key or TF ICI key.; , ATTENDANT NIGHT TRANSFER; - Assign a specific Attendant number to each Attendant Console.

NEAX2400 IPX Feature Programming Manual Page 394 NDA-24297, Issue 1 I-5 Inter-position Transfer I-5 Inter-position Transfer General Description This feature allows Attendants to transfer calls at their ATTENDANT CONSOLE [A-3] to another Attendant'sConsole in systems where MULTIPLE CONSOLE OPERATION ...

Page 438 - Call), and FPC of the node that operator calls are to be terminated to.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 395 Inter-position Transfer I-5 FCCS Programming This data setting describes only the additional or replacement commands used to activate FCCSservices. When used as an FCCS feature, these commands replace the non-network commands (forexa...

Page 439 - Individual Attendant Access; The user dials the individual Attendant identification number.; ASAT; trunk number assigned in the ATRK command, Route 901.

NEAX2400 IPX Feature Programming Manual Page 396 NDA-24297, Issue 1 I-6 Individual Attendant Access I-6 Individual Attendant Access General Description This feature permits a user to call a particular ATTENDANT CONSOLE [A-3] via an individual Attendantidentification number. Operating Procedure 1. Th...

Page 440 - This feature provides the D; Condition of the LED is as follows:

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 397 I-Hold Indication - D term I-7D I-7D I-Hold Indication - D term General Description This feature provides the D term with a distinctive flash to differentiate between a call the user placed on hold from other calls. Operating Procedu...

Page 441 - Manual operation is not required.; Condition of LED is as follows:

NEAX2400 IPX Feature Programming Manual Page 398 NDA-24297, Issue 1 I-8D I-Use Indication - D term I-8D I-Use Indication - D term General Description This feature provides the D term with a unique LED indication to display the particular line the user is on. Operating Procedure Manual operation is n...

Page 442 - Intercom Calling; ICM

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 399 Intercom Calling I-9 I-9 Intercom Calling General Description This feature allows a sub-line appearance, assigned to a D term , to be used for INTERCOM CALLING. Operating Procedure To originate 1. Press the Intercom sub-line appearan...

Page 444 - AISD

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 401 Intercom Calling I-9 Programming (cont’d) 27: Eight Conference Equipment RSC: Route Restriction Class (0-15) For assignment of RSC, ARSC command.SFC: Service Feature Class (0-15) For assignment of SFC, ASFC command. STEP 5: AISA - Pr...

Page 445 - I-10D Intermediate Station Number Display - D

NEAX2400 IPX Feature Programming Manual Page 402 NDA-24297, Issue 1 I-10D Intermediate Station Number Display - D term I-10D Intermediate Station Number Display - D term General Description This feature provides an LCD display to the called and calling D term station when an intermediate station has...

Page 446 - Queuing; Operation at the Main location; The maximum queuing slots per system are: 64 calls for 1 IMG system

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 403 Inter-Office Off-Hook Queuing I-11 I-11 Inter-Office Off-Hook Queuing General Description This feature can be employed in a Main-Satellite configuration to allow a Satellite user to queue for LEAST COSTROUTING - 3/6-DIGIT [L-5] at th...

Page 447 - - Assign the incoming TIE Line route as follows:; System Data 1, Index 41: Designate the Trunk Queuing Override Timer

NEAX2400 IPX Feature Programming Manual Page 404 NDA-24297, Issue 1 I-11 Inter-Office Off-Hook Queuing Service Conditions (cont’d) 7. OGQ data is transmitted to and stored in the Network Control Node (NCN). Therefore, all the OGQ datawill be cleared by the system initialization of the NCN. 8. When t...

Page 448 - Index 159: Designate Automatic Cancel Timer; ASPAN

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 405 Inter-Office Off-Hook Queuing I-11 FCCS Programming (cont’d) Index 68, b3: Enables automatic cancel timer0/1 = -/Automatic cancel timer is Available Index 159: Designate Automatic Cancel Timer STEP 2: ASPAN - These data must be assig...

Page 449 - Immediate Ringback Tone; When a station calls another station or Attendant; IMMEDIATE RINGBACK TONE is returned.; IMMEDIATE RINGBACK TONE is returned.; When a trunk is connected to a station or Attendant

NEAX2400 IPX Feature Programming Manual Page 406 NDA-24297, Issue 1 I-20 Immediate Ringback Tone I-20 Immediate Ringback Tone General Description IMMEDIATE RINGBACK TONE will be heard by the caller immediately upon determination by the system thatthe called station is idle. IMMEDIATE RINGBACK TONE i...

Page 450 - Internal Zone Paging; speakers of the designated group by dialing; Announce the call over the built-in speakers on the D

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 407 Internal Zone Paging I-21 I-21 Internal Zone Paging General Description This feature allows an individual to make a voice call through the D term speakers of the designated group by dialing the INTERNAL ZONE PAGING access code or pre...

Page 458 - Voice Call by Internal Zone Paging (Trunk Hold)

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 415 Internal Zone Paging I-21 Operating Procedure (cont’d) 3. Voice Call by Internal Zone Paging (Trunk Hold) a.) To answer by using Prime Line: Note 2 Note 1: The number of the chime can be set by ASYD SYS1, Index 321, b7 0/1: 4/1 time ...

Page 463 - Refer to CALL PICKUP - DIRECT; Assign NND according to the predetermined numbering plan.; In this case, this IZP Group cannot be paged.

NEAX2400 IPX Feature Programming Manual Page 420 NDA-24297, Issue 1 I-21 Internal Zone Paging Service Conditions (cont’d) 21. Using Prime Line or Off-Hook to answer can be selected. If this selection is not unified between each nodewithin the FCCS network, execute the method of answering assigned to...

Page 465 - Lamp Check; Check; Attendant presses the Position Busy key the LED lights.

NEAX2400 IPX Feature Programming Manual Page 422 NDA-24297, Issue 1 L-1 Lamp Check L-1 Lamp Check General Description This feature allows the Attendant, by pressing the LCHK key, to light all lamps and sound the ATTENDANTCONSOLE [A-3] buzzer. Operating Procedure 1. Attendant presses the Position Bus...

Page 466 - Line Lockout; For LINE lock-out with Howler Tone

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 423 Line Lockout L-3 L-3 Line Lockout General Description This feature provides for the automatic release of a station from the common equipment when it has remained off-hook for longer than the usual interval before dialing. The NEAX240...

Page 468 - Dial the area code, office code and number.; . If the NXX is not located in either

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 425 Least Cost Routing - 3/6-Digit L-5 L-5 Least Cost Routing - 3/6-Digit General Description This feature allows the NEAX2400 IPX to be programmed to route outgoing calls over the most economical facility(WATS, FX, DDD). Based on the ar...

Page 473 - = Does not require a prefix

NEAX2400 IPX Feature Programming Manual Page 430 NDA-24297, Issue 1 L-5 Least Cost Routing - 3/6-Digit Programming (cont’d) OPR No. (OPR) - Outgoing Pattern Route. The number referenced in AFRS, consisting of a series ofroutes to be chosen based on number dialed.Route Advance Number (RA) - The order...

Page 474 - Times Setting; ARTI; Office

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 431 Least Cost Routing - 3/6-Digit L-5 Programming (cont’d) When assigning for SCC, each NXX is assigned as the following:EFFECT: 0 = Restricted EFFECT: 1 = Allowed EFFECT: 2 = Not Used Note: *When PFX, EFFECT = 1 is assigned. Add the re...

Page 475 - =Not require a prefix

NEAX2400 IPX Feature Programming Manual Page 432 NDA-24297, Issue 1 L-5 Least Cost Routing - 3/6-Digit FCCS Programming (cont’d) STEP 7: AOPRL/N - The AFRSL/N command designates the dialing sequence and the OPR to be selected. The AOPRL/N defines the routes and in what order these routes will be sel...

Page 477 - The call has not been established.

NEAX2400 IPX Feature Programming Manual Page 434 NDA-24297, Issue 1 L-6 Last Number Called - Single-Line Station L-6 Last Number Called - Single-Line Station General Description When a user originates a station-to-station call or an outgoing trunk call, but the call is not established, this featurea...

Page 479 - Last Number Called - D; This feature allows the user of a D; Press the REDIAL key on a D; Press the REDIAL key on a D

NEAX2400 IPX Feature Programming Manual Page 436 NDA-24297, Issue 1 L-6D Last Number Called - D term L-6D Last Number Called - D term General Description This feature allows the user of a D term to store the last five numbers dialed, and to redial the numbers by pressing the REDIAL key. The D term u...

Page 480 - MIC

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 437 Last Number Called - D term L-6D Operating Procedure (cont’d) 6. The called party answers the call. a.) The Prime Line lights green.b.) The Speaker Lamp is OFF. Service Conditions 1. A maximum of 5 destinations can be stored. 2. The ...

Page 486 - LCR - Time Of Day Routing; AOPR

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 443 LCR - Time Of Day Routing L-10 L-10 LCR - Time Of Day Routing General Description This feature provides automatic routing of outgoing calls over alternative customer facilities, based on thedestination code. The system will select th...

Page 487 - Assign the following:; AOPRL

NEAX2400 IPX Feature Programming Manual Page 444 NDA-24297, Issue 1 L-10 LCR - Time Of Day Routing Programming (cont’d) STEP 2: ASDC - If 6-digit translation is required where both the Area and Office codes must be examined, this command must be used. The system is automatically set as an Allow tabl...

Page 489 - Line Load Control

NEAX2400 IPX Feature Programming Manual Page 446 NDA-24297, Issue 1 L-11 Line Load Control L-11 Line Load Control General Description This feature allows the Attendant to deny a preselected group of stations the ability to originate calls by activatinga key. The sole intention of this feature is to ...

Page 490 - Incoming calls terminated to CCIS/ISDN cannot be restricted.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 447 Line Load Control L-11 Programming STEP 1: ASYD - System Data 1, Index 59, Bit 0. Should the system restrict incoming calls during LINE LOAD CONTROL? 0/1: No/Yes. Note: Incoming calls terminated to CCIS/ISDN cannot be restricted. STE...

Page 491 - Line Load Control - Automatic; Incoming calls from a trunk can be restricted in system data.; calls during Line Load Control.

NEAX2400 IPX Feature Programming Manual Page 448 NDA-24297, Issue 1 L-20 Line Load Control - Automatic L-20 Line Load Control - Automatic General Description This feature allows the system to automatically deny a preselected group of stations the ability to originate calls. Thesole intention of this...

Page 492 - Line Load Control - MAT

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 449 Line Load Control - MAT L-21 L-21 Line Load Control - MAT General Description This feature allows the MAT [M-18] to deny a preselected group of stations the ability to originate calls by activatinga command key. The sole intention of...

Page 493 - Listed Directory Number; The Attendant presses the SRC key.; The LISTED DIRECTORY NUMBER should be assigned in system data.

NEAX2400 IPX Feature Programming Manual Page 450 NDA-24297, Issue 1 L-24 Listed Directory Number L-24 Listed Directory Number General Description This feature enables Listed Directory Number Display on the ATTENDANT CONSOLE [A-3] when the Attendanthas answered a Listed Directory Number call. This fe...

Page 494 - changeover information.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 451 Listed Directory Number L-24 Service Conditions (cont’d) 7. The user can program FPC of node with ATTCON, which receives LDN calls, to each node by usingALDNN command. 8. When “LDN assigned by ALDN command” and “LDN assigned by ALDNN...

Page 495 - LDN Night Connection; The calling party receives ringback tone.; The destination station can be assigned on a per-LDN basis.

NEAX2400 IPX Feature Programming Manual Page 452 NDA-24297, Issue 1 L-28 LDN Night Connection L-28 LDN Night Connection General Description This service feature routes LISTED DIRECTORY NUMBER (LDN) calls to a preselected station when the systemis in night mode. This service feature also enables the ...

Page 497 - When the above features are not set, the LDN call is queued.

NEAX2400 IPX Feature Programming Manual Page 454 NDA-24297, Issue 1 L-28 LDN Night Connection Service Conditions (cont’d) • FCCS link is all busy/make busy/rocked out. • Trunk/Route is all busy. • Toll is restricted. • Line is locked out. Note 5: NIGHT CONNECTION FIXED [N-1] takes priority over TRUN...

Page 498 - ALDN; - Assign LDN number and its transfer destination.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 455 LDN Night Connection L-28 Interactions (cont’d) 5. An incoming DID call will ring at the Night transfer destination station if CALL FORWARDING-DON’TANSWER [C-3] is set to the Attendant. 6. There is no restriction check for LDN NIGHT ...

Page 502 - LDN Night Connection - Outside

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 459 LDN Night Connection - Outside L-30 L-30 LDN Night Connection - Outside General Description This feature routes LOCAL DIRECTORY NUMBER (LDN) calls to a preselected station outside the system whenthe system is in Night mode. This feat...

Page 504 - When above feature is not set, the LDN call is queued.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 461 LDN Night Connection - Outside L-30 Service Conditions (cont’d) 19. When system is changed from Day Mode to Night Mode while a LDN call is terminating to ATTCON,the LDN call is transferred to preprogrammed forwarding destination. If ...

Page 507 - Paging; To page

NEAX2400 IPX Feature Programming Manual Page 464 NDA-24297, Issue 1 M-1 Meet-Me Paging M-1 Meet-Me Paging General Description This feature allows a user dial access to paging equipment, and connects both parties automatically, after the calledparty has answered the page. Operating Procedure To page ...

Page 508 - - Assign the Make Idle status to the Paging Trunks.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 465 Meet-Me Paging M-1 Interactions (cont’d) 4. BUSY VERIFICATION [B-3] and EXECUTIVE OVERRIDE [E-1]: These features will be denied for aconnection that includes the Paging route. 5. DELAY OPERATION: Station A is connected to party B. St...

Page 509 - the Route Restriction Classes (RSC) assigned to these stations.

NEAX2400 IPX Feature Programming Manual Page 466 NDA-24297, Issue 1 M-1 Meet-Me Paging Programming (cont’d) STEP 5: ANPD - Reserve levels for trunk access and for MEET-ME PAGE answer and cancel codes. Assign the trunk access level for a Connection Index (CI) of Normal (N) and Hooking (H) service. Nu...

Page 510 - Miscellaneous Trunk Access; An interface circuit must be provided per trunk required.; - Assign the Make Idle status to the trunks.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 467 Miscellaneous Trunk Access M-2 M-2 Miscellaneous Trunk Access General Description This feature provides access to all types of external and customer provided equipment/facilities, such as FX [F-2],WATS [W-1], CCSA [C-14], TIE LINE [T...

Page 511 - Miscellaneous Trunk Restriction; Restricted call attempts can be either:

NEAX2400 IPX Feature Programming Manual Page 468 NDA-24297, Issue 1 M-3 Miscellaneous Trunk Restriction M-3 Miscellaneous Trunk Restriction General Description This feature provides for certain stations and certain dial-repeating TIE trunks to be denied access to particular trunkgroups, such as FX [...

Page 512 - Console or receive reorder tone?; ARSC; ARSCN

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 469 Miscellaneous Trunk Restriction M-3 Programming STEP 1: ASYD - System Data 2, Index 1, Bits 4 & 5. Should a restricted station be routed to the Attendant Console or receive reorder tone? Reorder Tone: Bit 4 = 0, Bit 5 = 0.Attenda...

Page 513 - Multiple Console Operation; The maximum number of consoles per PIM is 4.; See ATTENDANT CONSOLE

NEAX2400 IPX Feature Programming Manual Page 470 NDA-24297, Issue 1 M-4 Multiple Console Operation M-4 Multiple Console Operation General Description This feature allows one or more ATTENDANT CONSOLEs [A-3] to operate within the same system. Operating Procedure No manual operation is required. Servi...

Page 514 - provides information to the ASAT command.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 471 Multiple Console Operation M-4 Interactions (cont’d) 4. When more than one Attendant Console is installed, a Primary Attendant Console may be assigned(AMAT command). This Attendant Console will control the implementation of DAY/NIGHT...

Page 515 - Music On Hold; On

NEAX2400 IPX Feature Programming Manual Page 472 NDA-24297, Issue 1 M-7 Music On Hold M-7 Music On Hold General Description This feature allows a party to hear music while in the CALL HOLD [C-6], CALL TRANSFER [C-10, 11], orATTENDANT CAMP-ON WITH TONE INDICATION [A-1] conditions. Operating Procedure...

Page 517 - for selectable timing choices.

NEAX2400 IPX Feature Programming Manual Page 474 NDA-24297, Issue 1 M-11 Meet-Me Paging - Attendant Service Conditions (cont’d) 9. A Page waiting to be answered is automatically cancelled after a predetermined programmed duration. SeeVARIABLE TIMING PARAMETERS [V-1] for selectable timing choices. 10...

Page 518 - The Attendant Console cannot dial the MEET-ME PAGING answer codes.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 475 Meet-Me Paging - Attendant M-11 Interactions 1. MEET-ME PAGING and PAGING ACCESS [P-1] can be provided simultaneously in the same system.ARTD, CDN 6:TCL must be assigned as data “8” for MEET-ME PAGE, while PAGING ACCESS routesmay be ...

Page 520 - Maintenance Printout; Printout; The following hard copy reports can be obtained

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 477 Maintenance Printout M-15 M-15 Maintenance Printout General Description The NEAX2400 IPX can provide a hard copy of maintenance and system management data via theMAINTENANCE ADMINISTRATION TERMINAL (MAT) [M-18] printer. Operating Pro...

Page 521 - MAT; AIOC; For a System Message Printer, assign these Bits only.

NEAX2400 IPX Feature Programming Manual Page 478 NDA-24297, Issue 1 M-15 Maintenance Printout Programming (cont’d) System Data 1, Index 86, Bit 4. Fault Information automatic printout of System Messages? 0/1: No/Yes.System Data 1, Index 86, Bit 7. Are simplified or detailed System Messages required?...

Page 522 - Maintenance Administration Terminal (MAT); The following functions may be performed from the MAT:

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 479 Maintenance Administration Terminal (MAT) M-18 M-18 Maintenance Administration Terminal (MAT) General Description This feature provides a man-machine interface, using a personal computer, to accomplish such items as on-linesystem pro...

Page 523 - port used as System Message.; - Assign the attribute data of the IOC port.; TOTAL APPLICATIONS USED

NEAX2400 IPX Feature Programming Manual Page 480 NDA-24297, Issue 1 M-18 Maintenance Administration Terminal (MAT) Service Conditions (cont’d) b.) The maximum digits of the USER NAME is 16, and those of the ID CODE is 8.c.) Lock Out information is output with the information of the USER NAME, date, ...

Page 524 - Message Reminder; Reminder; To send a message from a single-line telephone; When the station number exceeds 12 digits, MSG is not displayed.; To return the message; MESSAGE XXXXXXXXXXXX XX: XX

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 481 Message Reminder M-19 M-19 Message Reminder General Description This feature allows a single-line telephone to leave a MESSAGE REMINDER at the called D term set. Operating Procedure To send a message from a single-line telephone 1. D...

Page 525 - A maximum of 32 digits can be saved at the called party.

NEAX2400 IPX Feature Programming Manual Page 482 NDA-24297, Issue 1 M-19 Message Reminder Service Conditions (cont’d) 11. When the call is in the UCD queue, the MESSAGE REMINDER service is not provided. 12. A maximum of 32 digits can be saved at the called party. 13. To memorize the telephone number...

Page 526 - To send a message from a D; To review the messages

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 483 Message Reminder - D term M-19D M-19D Message Reminder - D term General Description This feature allows a D term to leave a MESSAGE REMINDER at another D term . Operating Procedure To send a message from a D term 1. Dial the desired ...

Page 527 - If the D; first eight digits only.; FUNCTION NAME

NEAX2400 IPX Feature Programming Manual Page 484 NDA-24297, Issue 1 M-19D Message Reminder - D term Service Conditions (cont’d) 5. Messages can be displayed only when the station is on-hook. A message may be cleared by displaying themessage and pressing the “*” or “#” key on the called D term 's key...

Page 528 - - Assign the station according to the following parameters:; Not assigned for Feature Key; line sets require the ASFC assignment.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 485 Message Reminder - D term M-19D Programming (cont’d) STEP 3: ANPD - Reserve a number level for feature access. Assign for Normal (N), Hooking (H), and Busy (B). Assign NND in accordance with predetermined Numbering Plan. STEP 4: ASPA...

Page 531 - Message Waiting Lamp Setting - Attendant; To set a Message Waiting indication; MW

NEAX2400 IPX Feature Programming Manual Page 488 NDA-24297, Issue 1 M-23 Message Waiting Lamp Setting - Attendant M-23 Message Waiting Lamp Setting - Attendant General Description This feature permits an ATTENDANT CONSOLE [A-3] to set or cancel a Message Waiting indication on a stationprovided with ...

Page 534 - Multiple Call Forwarding - Busy Line

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 491 Multiple Call Forwarding - Busy Line M-24 M-24 Multiple Call Forwarding - Busy Line General Description This feature permits a call to a busy station to be forwarded, a maximum of five times, to preprogrammed idlestations. Existing C...

Page 535 - Dial the originating telephone number.; A call cannot be forwarded to the originating station.

NEAX2400 IPX Feature Programming Manual Page 492 NDA-24297, Issue 1 M-24 Multiple Call Forwarding - Busy Line Operating Procedure (cont’d) 4. Dial the originating telephone number. 5. Dial the desired target telephone number; receive service set tone. To cancel from the ATTENDANT CONSOLE [A-3] 1. Pr...

Page 539 - This command is used for assigning the function to a soft key.; MAXIMUM NUMBER OF JUMPS

NEAX2400 IPX Feature Programming Manual Page 496 NDA-24297, Issue 1 M-24 Multiple Call Forwarding - Busy Line Interactions (cont’d) 5. If an Attendant attempts BUSY VERIFICATION [B-3] to Station A, which has CALL FORWARDING-BUSY LINE [C-2] set to Station B and Station B is busy, BUSY VERIFICATION [B...

Page 541 - Multiple Call Forwarding - Don’t Answer

NEAX2400 IPX Feature Programming Manual Page 498 NDA-24297, Issue 1 M-25 Multiple Call Forwarding - Don’t Answer M-25 Multiple Call Forwarding - Don’t Answer General Description This feature permits a call to an unanswered station to be forwarded, multiple times, to preprogrammed idle stationsthat d...

Page 542 - Forwarding to an Attendant Console:

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 499 Multiple Call Forwarding - Don’t Answer M-25 Service Conditions (cont’d) d.) If the forwarding sequence, after a CALL FORWARDING - DON'T ANSWER [C-3] goes through several stations with CALL FORWARDING - ALL CALLS [C-5] set and ends u...

Page 544 - with DO NOT DISTURB

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 501 Multiple Call Forwarding - Don’t Answer M-25 Interactions 1. If access codes for CALL FORWARDING-BUSY LINE [C-2] and CALL FORWARDING-DON’TANSWER [C-3] are the same, only one key needs to be assigned in AKYD or ADSL, and only one acce...

Page 546 - Message Center Interface; Center; Call Indicator Lamp on D; Series E is used as the Message Waiting Lamp.; Control of Call Indicator Lamp based on data from the external CPU.; Feature 2; Dual Call Forwarding service is possible.; Feature 1

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 503 Message Center Interface M-26 M-26 Message Center Interface General Description This feature provides an interface to an external CPU for Message Center information when a specific UCD [U-1]group or ATTENDANT CONSOLE [A-3] is called....

Page 547 - Available for interoffice station transfer calls only.

NEAX2400 IPX Feature Programming Manual Page 504 NDA-24297, Issue 1 M-26 Message Center Interface Operating Procedure (cont’d) 4. The called station will be able to receive a message by dialing “0”, or by a computer terminal by enteringhis/her identification number. 5. The external CPU, upon receivi...

Page 548 - Multiple nodes within the FCCS network can accommodate the MC.; SOCKET Interface (LAN interface) Conditions

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 505 Message Center Interface M-26 Service Conditions (cont’d) 4. If the Host/CPU malfunctions and stops collecting call records, the NEAX2400 IPX can store up to 16/32call records. If the maximum of 16/32 call records is stored and a 17t...

Page 550 - In case a Message Center is shared by both CCIS and FCCS networks:

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 507 Message Center Interface M-26 Interactions (cont’d) 2. In case a Message Center is shared by both CCIS and FCCS networks: a.) Message data will be transmitted to the shared MC (in the figure below, assumed to be connected to the FCCS...

Page 551 - In case the Message Center exists only on the side of FCCS network:

NEAX2400 IPX Feature Programming Manual Page 508 NDA-24297, Issue 1 M-26 Message Center Interface Interactions (cont’d) b.) The MC, though provided outside the FCCS network, can also control the Message Waiting Lamp for each station on the FCCS service link, as well as ON/OFF indication of the lamps...

Page 552 - calculate the message-sending Guard Timer for Message Center.; - Assign the function and attribute data of the IOC ports.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 509 Message Center Interface M-26 Programming STEP 1: ASYD - System Data 1, Index 28, Bits 0-4. Assign a Miscellaneous Timer Counter (MTC) used to calculate the message-sending Guard Timer for Message Center. Timer = MTC x 128ms. Normall...

Page 553 - by

NEAX2400 IPX Feature Programming Manual Page 510 NDA-24297, Issue 1 M-26 Message Center Interface FCCS Programming (cont’d) STEP 2: AMWF - Assign FPC (Fusion Point Code) of the node for being controlled the MWL on the D term by the MC. Note 1 Note 1: Assign this data to the node accommodating the MC...

Page 554 - Message Waiting Lamp Setting - Station; or MY Line; MW SET

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 511 Message Waiting Lamp Setting - Station M-30 M-30 Message Waiting Lamp Setting - Station General Description This feature allows a station to set/cancel a Message Waiting indication or lamp. Any single line telephone or D term can set...

Page 555 - To cancel a Message Waiting Indication from a D; TYPE OF STATION SET; MW CANCEL

NEAX2400 IPX Feature Programming Manual Page 512 NDA-24297, Issue 1 M-30 Message Waiting Lamp Setting - Station Operating Procedure (cont’d) To cancel a Message Waiting Indication from a D term or MY Line 1. Lift the handset or press the SPEAKER key; receive dial tone. 2. Press the Message Waiting C...

Page 556 - LCD

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 513 Message Waiting Lamp Setting - Station M-30 Service Conditions (cont’d) 7. The LCD on the D term Series E station displays the following messages: Interactions 1. For MESSAGE WAITING LAMP SETTING-STATION, the 8DLC/16ELC card is requi...

Page 557 - CONSULTATION HOLD-ALL CALLS; DUAL HOLD; sets use this feature.; the Message Waiting Lamp setting feature.

NEAX2400 IPX Feature Programming Manual Page 514 NDA-24297, Issue 1 M-30 Message Waiting Lamp Setting - Station Interactions (cont’d) 4. When an incoming call is answered by the sub-line appearance on another station, the following servicesmay be activated either by the answering station or by anoth...

Page 558 - Multiple Call Forwarding - All Calls

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 515 Multiple Call Forwarding - All Calls M-44 M-44 Multiple Call Forwarding - All Calls General Description This feature permits a call to a CALL FORWARDING - ALL CALLS station to be forwarded multiple times to apredesignated idle statio...

Page 559 - will terminate at that station.

NEAX2400 IPX Feature Programming Manual Page 516 NDA-24297, Issue 1 M-44 Multiple Call Forwarding - All Calls Service Conditions (cont’d) c.) If a sequence of CALL FORWARDING - ALL CALLS [C-5] and CALL FORWARDING - BUSY LINE [C-2] forwards the call back to the originating station, the forward is not...

Page 562 - sets, MULTIPLE CALL FORWARDING-ALL CALLS may be assigned to a

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 519 Multiple Call Forwarding - All Calls M-44 Interactions (cont’d) 4. When a station in a STATION HUNTING [S-7, 8, 9] group initiates MULTIPLE CALL FORWARDING-ALL CALLS, calls normally destined for this station will not be received. The...

Page 564 - Manual Signaling; Signaling; This is also applied to FCCS service.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 521 Manual Signaling M-47 M-47 Manual Signaling General Description This feature permits D term users to send a one-second ring to a predetermined station. The manual intercom SIGNAL key (SIG key) is operational at all times. An Intercom...

Page 566 - Multi Channel Recording - DAT; Recording by designating RT and TK:; REC; Route Trunk; RECORDING START; RECORDING END; In 5 seconds

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 523 Multi Channel Recording - DAT M-48 M-48 Multi Channel Recording - DAT General Description This feature allows a user to record a message to multiple Digital Announcement Trunks (DATs) in a singleoperation. The message recorded in a t...

Page 567 - e.) Replace the handset to finish playback of the recorded message.

NEAX2400 IPX Feature Programming Manual Page 524 NDA-24297, Issue 1 M-48 Multi Channel Recording - DAT Operating Procedure (cont’d) b.) Dial the MULTI CHANNEL RECORDING (REPLAY) access code from the station; receive special dial tone. c.) Enter Route Number and Trunk Number; the special dial tone st...

Page 569 - UCD controlling telephone number; Recording Time

NEAX2400 IPX Feature Programming Manual Page 526 NDA-24297, Issue 1 M-48 Multi Channel Recording - DAT Operating Procedure (cont’d) e.) Replace the handset to finish playback of the recorded message. Note: Even though the recording of a message has been finished, playback of the trunk cannot be acce...

Page 570 - REPLAY; REPLAY START

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 527 Multi Channel Recording - DAT M-48 Operating Procedure (cont’d) b.) Dial the MULTI CHANNEL RECORDING (REPLAY) access code from the station; receive special dial tone. c.) Press * and enter the UCD controlling telephone number; the sp...

Page 571 - service set tone. The service set tone continues for 3 seconds.

NEAX2400 IPX Feature Programming Manual Page 528 NDA-24297, Issue 1 M-48 Multi Channel Recording - DAT Operating Procedure (cont’d) c.) Press # and enter the message number that has been assigned in the AAST command; receive service set tone. The service set tone continues for 3 seconds. d.) Start y...

Page 572 - The maximum recording length is 60 sec (30 sec in the case of UCD).

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 529 Multi Channel Recording - DAT M-48 Operating Procedure (cont’d) d.) A recorded message of the designated Message Number for ACD is automatically played back. e.) Replace the handset to finish playback of the recorded message. Note: E...

Page 573 - DUBBING TIME

NEAX2400 IPX Feature Programming Manual Page 530 NDA-24297, Issue 1 M-48 Multi Channel Recording - DAT Service Conditions (cont’d) 8. When the system encounters a busy trunk in an attempt to make a dubbing of the message to the remainingtrunks, the trunk is retried after a 16 second interval. Each t...

Page 574 - KIND

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 531 Multi Channel Recording - DAT M-48 Programming (cont’d) STEP 7: APAD - Assign the PAD control data. KIND T (= Assignment of PAD data for dubbing)S (= Assignment of PAD data for playback)

Page 575 - CODE; KP

NEAX2400 IPX Feature Programming Manual Page 532 NDA-24297, Issue 1 M-84 MF Signaling - DID M-84 MF Signaling - DID General Description In the Associated Channel Interoffice Signaling system, this feature allows use of selective codes of Multifrequency(MF) signals. MF - (ANSI) codes: A total of 15 c...

Page 576 - Connection to the following services is not available:; - Assign the first digit of the MF line access code.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 533 MF Signaling - DID M-84 Service Conditions (cont’d) 4. Connection patterns to which MF signaling system can be applied are as follows: a.) Individual call origination by stationb.) Attendant-to-Attendant connectionc.) Individual call...

Page 578 - Message Waiting Indication - D; Initial Display; When controlled by

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 535 Message Waiting Indication - D term M-85D M-85D Message Waiting Indication - D term General Description This feature allows Message Waiting (MW) information to be displayed on the middle line (24 digits) of the LCD. Operating Procedu...

Page 579 - MF ANI to SMDR; Also see TRUNK LINE APPEARANCE; -line LCD, the lower LCD can be used for

NEAX2400 IPX Feature Programming Manual Page 536 NDA-24297, Issue 1 M-101 MF ANI to SMDR M-101 MF ANI to SMDR General Description This feature allows an office receiving ANI information by means of MF signal to output the information to theexpanded SMDR area. Operating Procedure No manual operation ...

Page 582 - Night Connection - Fixed; To answer NIGHT CONNECTION calls

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 539 Night Connection - Fixed N-1 N-1 Night Connection - Fixed General Description This feature routes calls normally directed to the ATTENDANT CONSOLE [A-3] to a preselected common stationwithin the system when the Night Mode has been en...

Page 583 - NIGHT CONNECTION - FLEXIBLE

NEAX2400 IPX Feature Programming Manual Page 540 NDA-24297, Issue 1 N-1 Night Connection - Fixed Interactions (cont’d) 5. When the NIGHT CONNECTION - FLEXIBLE [N-2] feature is provided, assignments can be made bythe ATTENDANT CONSOLE [A-3] or NIGHT CONNECTION - FIXED station by use of the CALLFORWAR...

Page 584 - ACSIL

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 541 Night Connection - Fixed N-1 Programming STEP 1: ASYD - System Data 1, Index 147. DIT supervisory timer for a busy station. How often will the CPU look at the Idle/Busy status of the station for rerouting the DIT call to the destinat...

Page 585 - Night Connection - Flexible

NEAX2400 IPX Feature Programming Manual Page 542 NDA-24297, Issue 1 N-2 Night Connection - Flexible N-2 Night Connection - Flexible General Description This feature provides arrangements to route calls, usually directed to the ATTENDANT CONSOLE [A-3], insteadto a preselected station on a flexible, a...

Page 586 - Operation

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 543 Non-delay Operation N-3 N-3 Non-delay Operation General Description This feature allows the ATTENDANT CONSOLE [A-3] to place any calling party on hold, dialing the call, andconnecting the calling and called parties. Operating Procedu...

Page 591 - Night Connection Outside - System; A ring-down or LDN call terminates from a trunk.; Tandem restriction is applied to this feature.

NEAX2400 IPX Feature Programming Manual Page 548 NDA-24297, Issue 1 N-17 Night Connection Outside - System N-17 Night Connection Outside - System General Description This is a night transfer service on a system basis, enabling a ring-down or LDN call to be transferred to a preselectedstation outside...

Page 592 - Name Display - System; The user information on the LCD flashes until the call is answered.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 549 Name Display - System N-28 N-28 Name Display - System General Description This feature allows a D term with LCD display to indicate the user information corresponding to the calling telephone number while engaged in STATION-TO-STATIO...

Page 593 - By this service, ASCII character data can be displayed.

NEAX2400 IPX Feature Programming Manual Page 550 NDA-24297, Issue 1 N-28 Name Display - System Operating Procedure (cont’d) Note: The user information on the LCD flashes until the call is answered. 3. When both the calling/called station are released from a station-to-station call, the LCD of the ca...

Page 594 - Maintenance; ATCC; - Assign the communication speed of the MAT at 4800 bps.; - Assign function and attribute data of the IOC ports.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 551 On-line Maintenance O-1 O-1 On-line Maintenance General Description This service feature permits maintenance routines to be performed on the NEAX2400 IPX without affecting normalsystem operation. Operating Procedure Refer to the NEAX...

Page 595 - Outgoing Trunk Queuing

NEAX2400 IPX Feature Programming Manual Page 552 NDA-24297, Issue 1 O-2 Outgoing Trunk Queuing O-2 Outgoing Trunk Queuing General Description This feature allows a user to dial a specified access code and enter a first-in, first-out queue, when encountering atrunk busy signal. As soon as an OUTGOING...

Page 596 - Dial pad operation for D

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 553 Outgoing Trunk Queuing O-2 Service Conditions (cont’d) 13. If a user goes on-hook within 6-8 seconds after encountering all trunks busy, OUTGOING TRUNKQUEUING can be set automatically to the station. 14. The station is set for OGQ fo...

Page 599 - Outgoing Trunk Queuing - D; Called Party

NEAX2400 IPX Feature Programming Manual Page 556 NDA-24297, Issue 1 O-2D Outgoing Trunk Queuing - D term O-2D Outgoing Trunk Queuing - D term General Description This service allows a D term user, upon encountering a trunk busy signal, to enter a first-in, first-out queue. Operating Procedure Withou...

Page 603 - Alarm; series with a display.; when

NEAX2400 IPX Feature Programming Manual Page 560 NDA-24297, Issue 1 O-6 Off-Hook Alarm O-6 Off-Hook Alarm General Description This feature allows a user to call the Attendant or a predetermined station by simply staying OFF-HOOK. Thecalling number is automatically displayed at the ATTENDANT CONSOLE ...

Page 605 - ASGD

NEAX2400 IPX Feature Programming Manual Page 562 NDA-24297, Issue 1 O-6 Off-Hook Alarm Programming (cont’d) S: Station A: Attendant Console SSTN: Special Station Number STEP 3: ASGD - This command defines what stations belong to the Special Incoming Group. Assign the following: TN: Tenant Number STN...

Page 606 - The caller receives service set tone remains off-hook and waits.; The maximum number of simultaneous OFF-HOOK QUEUEs per system:

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 563 Off-Hook Queuing O-7 O-7 Off-Hook Queuing General Description This service allows a user, upon encountering a trunk-busy condition, to remain off-hook and automatically enter afirst-in, first-out queue. As soon as an outgoing trunk b...

Page 607 - The time a call may remain in queue is unlimited.; Queuing Override Timer.

NEAX2400 IPX Feature Programming Manual Page 564 NDA-24297, Issue 1 O-7 Off-Hook Queuing Service Conditions (cont’d) 10. The maximum of number of the OGQ stations is 1,024 within the FCCS network (NCN can manage amaximum of 1,024 calls). 11. OGQ data is transmitted to and stored in the Network Contr...

Page 608 - SSC

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 565 Off-Hook Queuing O-7 FCCS Programming (cont’d) CI: B = Busy (for Entry), N = Normal (for Cancel) SRV: SSC SID: 19 - OG Queuing - Entry CI: N = Normal SID: 20 = OG Queuing - Cancel Note 1: When using ASYDL or ASYDN to program an FCCS ...

Page 609 - OVERFLOW is performed only once.

NEAX2400 IPX Feature Programming Manual Page 566 NDA-24297, Issue 1 O-13 Overflow - UCD O-13 Overflow - UCD General Description 1. When a call has terminated to UCD [U-1] Group A, and the incoming call has encountered all stationsbusy in Group A, the call is transferred to UCD [U-1] Group B, if Grou...

Page 610 - The call cannot be overflow more than 5 times.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 567 Overflow - UCD O-13 Service Conditions (cont’d) 5. A call can be overflowed 4 times at the maximum by using this feature. If overflowing destinations are allbusy, the call is queued into original group (depending on system data). For...

Page 612 - Outgoing Trunk Queuing - Attendant; Dial the access code and the desired number.; OFF-HOOK QUEUING is utilized for this service feature.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 569 Outgoing Trunk Queuing - Attendant O-16 O-16 Outgoing Trunk Queuing - Attendant General Description This feature allows an ATTENDANT CONSOLE [A-3], upon encountering a trunk busy condition, to remain Off-Hook and automatically enter ...

Page 614 - Outgoing Trunk Busy Announcements; The announcement machine can be provided on a per-tenant basis.; AAED; - Set Route Restriction Class to allow RES = 1 for announcement trunk.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 571 Outgoing Trunk Busy Announcements O-21 O-21 Outgoing Trunk Busy Announcements General Description This feature permits a station-originated call, upon encountering a trunk busy signal, to be automatically routed toa recorded announce...

Page 616 - If the trunk number is not assigned, the LCD doesn’t display.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 573 Off-Hook Line Number Display - D term O-37D Service Conditions 1. This service is provided when off-hook. In the preselect status, this is not provided. 2. This service is not provided when a call is originated by using HOT LINE [H-1...

Page 617 - Paging Access

NEAX2400 IPX Feature Programming Manual Page 574 NDA-24297, Issue 1 P-1 Paging Access P-1 Paging Access General Description This feature provides both ATTENDANT CONSOLE [A-3] and users dial access to PAGING equipment. Operating Procedure 1. Go off-hook; receive dial tone. 2. Dial the Paging access c...

Page 618 - BUSY is displayed on the D; LCD display when the Paging trunk is busy. Reorder tone is returned.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 575 Paging Access P-1 Interactions (cont’d) 5. For simple PAGING ACCESS [P-1], assignments in ASFC are not required. Refer directly to the otherPaging features, such as PAGING TRANSFER [P-10] . 6. The Attendant can dial the PRIORITY PAGI...

Page 619 - Passing Dial Tone; Restricted user dials Attendant.

NEAX2400 IPX Feature Programming Manual Page 576 NDA-24297, Issue 1 P-2 Passing Dial Tone P-2 Passing Dial Tone General Description This feature allows the Attendant to PASS DIAL TONE to a restricted user, enabling that user to place a call thatwould normally be restricted. Operating Procedure 1. Re...

Page 620 - various routes via the Attendant Console.; ATDP

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 577 Passing Dial Tone P-2 Interactions (cont’d) 2. The associated programming that should be examined is ATTENDANT CONSOLE [A-3], TOLLDENIAL/TOLL DIVERSION [T-7], TOLL RESTRICTION-3/6 DIGIT [T-8], LEAST-COSTROUTING-3/6 DIGIT [L-5], CLASS...

Page 621 - Power Failure Transfer

NEAX2400 IPX Feature Programming Manual Page 578 NDA-24297, Issue 1 P-3 Power Failure Transfer P-3 Power Failure Transfer General Description This feature provides for certain specified trunks to be automatically connected to designated stations in the eventof a loss of AC power. It is normally used...

Page 622 - Pushbutton Calling

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 579 Pushbutton Calling P-4 P-4 Pushbutton Calling General Description This feature permits users to originate calls using push button telephones and also allows D term stations the ability to control external devices requiring DTMF signa...

Page 624 - Pushbutton Calling - Attendant Only

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 581 Pushbutton Calling - Attendant Only P-5 P-5 Pushbutton Calling - Attendant Only General Description This feature permits an Attendant to place all calls over DTMF signaling lines from a pushbutton keypad on theATTENDANT CONSOLE [A-3]...

Page 625 - Pushbutton to Rotary Conversion; Users dial the desired telephone numbers.; See UNIVERSAL SENDER; Route Number

NEAX2400 IPX Feature Programming Manual Page 582 NDA-24297, Issue 1 P-6 Pushbutton to Rotary Conversion P-6 Pushbutton to Rotary Conversion General Description This feature allows DTMF telephones to be used when DTMF signaling is not provided or are not available fromthe Central Office and/or TIE Li...

Page 627 - Peg Count; Count

NEAX2400 IPX Feature Programming Manual Page 584 NDA-24297, Issue 1 P-7 Peg Count P-7 Peg Count General Description This service feature permits traffic studies and traffic analysis information to be accessed from theMAINTENANCE ADMINISTRATION TERMINAL (MAT) [M-18] and printed out. Operating Procedu...

Page 628 - To Order PEG COUNTS; To Display PEG COUNT Information

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 585 Peg Count P-7 Service Conditions (cont’d) 6. Traffic measurement duration time is designated for more than one hour. If the traffic measurementduration time is not designated, the measurement is performed indefinitely until a stop co...

Page 630 - Priority Call

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 587 Priority Call P-9 P-9 Priority Call General Description This feature allows the ATTENDANT CONSOLE [A-3] to answer various types of calls in the order of theirpriority. A special type of call can be handled prior to a regular call, at...

Page 632 - - This data must be set to the node calling the attendant.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 589 Priority Call P-9 FCCS Programming This data setting describes only the additional or replacement commands used to activate FCCSservices. When used as an FCCS feature, these commands replace the non-network commands (forexample, AAED...

Page 633 - Paging Transfer; While a user is engaged in a call; There are three paging options

NEAX2400 IPX Feature Programming Manual Page 590 NDA-24297, Issue 1 P-10 Paging Transfer P-10 Paging Transfer General Description This feature allows a user to transfer a paged call to a party that has been placed on hold. Operating Procedure While a user is engaged in a call 1. Switch hook flash or...

Page 634 - The Attendant cannot dial the MEET-ME PAGING answer codes.; phone) and then dials the PAGING TRANSFER

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 591 Paging Transfer P-10 Service Conditions (cont’d) 7. When using this feature via the FCCS network, PAGING ACCESS [P-1], PAGING TRANSFER [P-10]and RADIO PAGING [R-16] are provided to the paging station and the paged station in FCCS nod...

Page 635 - - Assign the paging route as shown below:; trunk and the station.

NEAX2400 IPX Feature Programming Manual Page 592 NDA-24297, Issue 1 P-10 Paging Transfer Programming (cont’d) System Data 1, Index 74, Bits 0 & 3. Assign the cancel timer for unanswered page. Assign data 00Hfor 30 seconds.(0-F + 1) x 30 = Cancel Timer. System Data 2, Index 1, Bits 0 & 1. Con...

Page 637 - Periodic Time Indication Tone

NEAX2400 IPX Feature Programming Manual Page 594 NDA-24297, Issue 1 P-11 Periodic Time Indication Tone P-11 Periodic Time Indication Tone General Description This feature provides a tone every 180 seconds, if required, to the user who has made an outgoing call. Operating Procedure No manual operatio...

Page 638 - Class that allows SFI 11 and SFI 33.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 595 Periodic Time Indication Tone P-11 Programming STEP 1: ASYD - System Data 1, Index 137. This timer sets the interval when the first tone will be sent to the station. Assign 00H for 3 minutes. System Data 1, Index 138. This timer sets...

Page 640 - Tenant

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 597 Prime Line Pickup - D term P-13D Programming (cont’d) 2: Multi-line Key KD: 0 TN: Tenant STN: Station Number RG: Ringing Assignment per multi-line appearance0: No Ringing.1: Ringing in Day Mode Only. 2: Ringing in Night Mode Only.3: ...

Page 642 - This command is required for assigning a function to each soft key.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 599 Privacy - D term P-14D Programming (cont’d) KYN: Key Number (1-40)KYI: Service Index 0: Key Not Used1: Feature Key 2: Multi-line Key KD: Not assigned for Feature Key FKY: Feature Key Number FKY = 50, DO NOT DISTURB STEP 2: ADSL - Ass...

Page 643 - Privacy On All Lines - D

NEAX2400 IPX Feature Programming Manual Page 600 NDA-24297, Issue 1 P-15D Privacy On All Lines - D term P-15D Privacy On All Lines - D term General Description This feature restricts D term users from pressing a busy line button and entering a conversation, which can occur with 1A2 key telephones wi...

Page 644 - Release; already engaged in communication. Also, by key operation of the D; already engaged in communication; To establish a 4-party call from a D; A 4-party call is established. The LCDs of the associated D; To establish a 4-party call when the PRIVACY key is pressed by a D; engaged in THREE-WAY CALLING

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 601 Privacy Release P-18 P-18 Privacy Release General Description This feature allows multiple stations (maximum 6) accommodated in the same multi-line group to override a D term already engaged in communication. Also, by key operation o...

Page 645 - Privacy Release; To restrict a station from overriding an 8-party call; CONF REST

NEAX2400 IPX Feature Programming Manual Page 602 NDA-24297, Issue 1 P-18 Privacy Release Operating Procedure (cont’d) 3. Station A lifts handset or presses SPEAKER key. The LCD displays: 4. Station C presses PRIVACY key again. 5. Station A receives ringback tone, and the LCD displays: 6. A 4-party c...

Page 646 - The called telephone number is displayed even when Privacy is set.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 603 Privacy Release P-18 Service Conditions (cont’d) 10. When a station tries to bridge into a call and presses the line appearance, and when PRIVACY RELEASEis not available because of the lack of an 8-party conference trunk, the LCD dis...

Page 648 - - Assign station data to each port of the PA-CFTB circuit card.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 605 Privacy Release P-18 Programming STEP 1: ASYD - System Data 1, Index 17, Bit 2. Is PRIVACY RELEASE service to be enabled? 0/1: No/Yes. Assign data 1. System Data 1, Index 17, Bit 3. Is an Interrupt tone for PRIVACY RELEASE to be enab...

Page 649 - Priority Paging; Paging Access from a station; The station performs paging.; Multiple priority paging to the same route is possible.

NEAX2400 IPX Feature Programming Manual Page 606 NDA-24297, Issue 1 P-30 Priority Paging P-30 Priority Paging General Description This feature allows a station or an ATTENDANT CONSOLE [A-3] to make a PRIORITY PAGING [P-30] accesswhen a paging call cannot normally be originated because another paging...

Page 651 - Pad Lock; Lock; To set PAD LOCK from the station

NEAX2400 IPX Feature Programming Manual Page 608 NDA-24297, Issue 1 P-57 Pad Lock P-57 Pad Lock General Description This feature temporarily restricts telephones from making unauthorized calls by dialing a special access code whenusers are away from their seats. Operating Procedure To set PAD LOCK f...

Page 653 - Personal Ringer; Ringer; Ringing patterns are as follows:; When a My Line of another D; This feature is available for the D

NEAX2400 IPX Feature Programming Manual Page 610 NDA-24297, Issue 1 P-59 Personal Ringer P-59 Personal Ringer General Description This feature provides another ringer pattern for the call terminating to the personal number and allows the user todistinguish the called number upon hearing ringing. Rin...

Page 654 - - Assign station data of the D; stations using this service.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 611 Personal Ringer P-59 Programming STEP 1: ASYD - System Data 1, Index 417, Bit 0: Recall Ringer Pattern for CALL BACK [C-1], CALL WAITING - ORIGINATING [C-31], and OUTGOING TRUNK QUEUING [O-2]. 0/1 = RingerPattern 5/Ringer Pattern 1. ...

Page 655 - Remote Access to System

NEAX2400 IPX Feature Programming Manual Page 612 NDA-24297, Issue 1 R-2 Remote Access to System R-2 Remote Access to System General Description This feature allows a user outside the NEAX2400 IPX to access the system via an exchange network connectionwithout Attendant or station assistance. The outs...

Page 656 - See AUTHORIZATION CODES; - Assign the Remote Access route as shown below:

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 613 Remote Access to System R-2 Interactions 1. The Authorization Code used in conjunction with REMOTE ACCESS TO SYSTEM will not be recordedin SMDR. System Data 2, Index 3, bit 5 is the only difference between Forced Account Code andAuth...

Page 657 - - Assign the Make Idle status to the REMOTE ACCESS TO SYSTEM trunks.

NEAX2400 IPX Feature Programming Manual Page 614 NDA-24297, Issue 1 R-2 Remote Access to System Programming (cont’d) STEP 6: MBTK - Assign the Make Idle status to the REMOTE ACCESS TO SYSTEM trunks. STEP 7: ACSI - Assign Route Number, Trunk Number, and Connection Service Index (CSI) = 5, REMOTE ACCE...

Page 658 - Reserve Power; Power; Batteries should be installed separate from the NEAX2400 IPX.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 615 Reserve Power R-3 R-3 Reserve Power General Description This feature provides a system with a backup power supply, functioning from a battery source, in the event of acommercial power failure. Operating Procedure Power is automatical...

Page 659 - Restriction from Outgoing Calls

NEAX2400 IPX Feature Programming Manual Page 616 NDA-24297, Issue 1 R-4 Restriction from Outgoing Calls R-4 Restriction from Outgoing Calls General Description This feature automatically denies preselected station lines within the NEAX2400 IPX system the ability to placeoutgoing calls and/or certain...

Page 660 - Route Restriction Class

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 617 Restriction from Outgoing Calls R-4 Interactions (cont’d) 3. CONSULTATION HOLD [C-17]: Station A may consult with station B when Route 1 is on Soft Hold. 4. THREE-WAY CALLING [T-2]: Station A cannot include restricted Station B in a ...

Page 662 - Rotary Dial Calling; Users dial rotary telephones in the normal fashion.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 619 Rotary Dial Calling R-5 R-5 Rotary Dial Calling General Description This feature permits users to originate calls over rotary or push-button lines using Rotary Dial telephones. Operating Procedure Users dial rotary telephones in the ...

Page 664 - Route Advance; Advance; Only trunks of the same type may be programmed for ROUTE ADVANCE.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 621 Route Advance R-6 R-6 Route Advance General Description This feature automatically routes outgoing calls over alternate facilities when the first-choice trunk group is busy.User selects the first-choice route by dialing the correspon...

Page 665 - - Reserve a number level for trunk access.

NEAX2400 IPX Feature Programming Manual Page 622 NDA-24297, Issue 1 R-6 Route Advance Interactions (cont’d) 2. TOLL RESTRICTION - 3/6 DIGIT [T-6] may be used in conjunction with ROUTE ADVANCE. Onlyroutes of the same type may be used in ROUTE ADVANCE. Two differently labeled C.O. trunks, suchas, DDD ...

Page 666 - Remote Maintenance; The following additional equipment is required for this feature:

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 623 Remote Maintenance R-7 R-7 Remote Maintenance General Description This feature allows office data changes or reassignments to be performed without a site visit by service personnel,and can be used to detect fault tendencies before th...

Page 667 - - Assign the function and attribute data of each I/O port to be used.; AUIDN; Data Type

NEAX2400 IPX Feature Programming Manual Page 624 NDA-24297, Issue 1 R-7 Remote Maintenance Programming STEP 1: Initialization of the system will automatically provide for Maintenance Administration Terminalcapabilities in System Data 1, Index 116 for Port 0. STEP 2: AIOC - Assign the function and at...

Page 668 - Radio Paging

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 625 Radio Paging R-16 R-16 Radio Paging General Description This feature allows users dialing access to customer-owned RADIO PAGING equipment and to selectively tone orvoice/tone alert individuals carrying pocket RADIO PAGING receivers. ...

Page 669 - Both the COT card and the TLT card can be used as the paging trunk.; The Attendant cannot dial the RADIO PAGING answer codes.

NEAX2400 IPX Feature Programming Manual Page 626 NDA-24297, Issue 1 R-16 Radio Paging Service Conditions (cont’d) 8. If the paging user has failed to hang up within a predetermined, programmable time interval (afteractivation), the paging connection is forcibly released. 9. If the paged party does n...

Page 672 - Route Restriction - Announcement

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 629 Route Restriction - Announcement R-27 R-27 Route Restriction - Announcement General Description This feature permits a station-originated call, dialed to a restricted outgoing number, to be automatically routed to arecorded announcem...

Page 673 - PAD

NEAX2400 IPX Feature Programming Manual Page 630 NDA-24297, Issue 1 R-37 RS-464A PAD R-37 RS-464A PAD General Description This service is for changing the current PAD control system for the lines and external trunks to a PAD control systemwhich conforms to the RS-464A specification. The following ta...

Page 676 - This service is used for each of the following connections:; Assignment of Telephone; - Assign either ONS or OPS to the SFC of the station.; Assignment of External Trunk; - Assign route class data for the route number of the external trunk.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 633 RS-464A PAD R-37 Service Conditions (cont’d) 3. An Attendant Console is regarded as an ONS. The Attendant Console will follow the PAD values assignedin ARTD. 4. If PAD data is assigned by APAD command, this data overrides other PAD d...

Page 677 - Ringer Mute; Mute

NEAX2400 IPX Feature Programming Manual Page 634 NDA-24297, Issue 1 R-49 Ringer Mute R-49 Ringer Mute General Description This feature allows a user to stop ringing by pressing the associated feature key on the D term . Operating Procedure 1. The D term user presses the RINGER MUTE key; the ringing ...

Page 678 - Route Name Display; Trunk type, which can be changed by system data.; This feature is not applicable to the Attendant Console.; DDD; NEWYORK

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 635 Route Name Display R-51 R-51 Route Name Display General Description This feature allows a user to assign a desired trunk type for a route by the system data. The assigned trunk type(maximum of 4 or 8 digits) is displayed on the upper...

Page 679 - This feature is available when the D; user presses the call terminating sub line. This feature is also; This data is required for the FCCS network.; ABCDEFGH

NEAX2400 IPX Feature Programming Manual Page 636 NDA-24297, Issue 1 R-51 Route Name Display Service Conditions (cont’d) • 8-digit display 8. This feature is available when the D term user presses the call terminating sub line. This feature is also available when the user presses the held sub line af...

Page 680 - Remote Call Forwarding Control; To set the ID code of the forwarding station

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 637 Remote Call Forwarding Control R-54 R-54 Remote Call Forwarding Control General Description This feature allows a station user to set/cancel the following forwarding features from the target station by dialingthe identification (ID) ...

Page 682 - - Assign the Remote Call Forwarding Control access code.; Remote Call Forwarding Control.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 639 Remote Call Forwarding Control R-54 Programming (cont’d) STEP 5: ARAC - Assign the Remote Call Forwarding Control access code. ICTN: Tenant Number of Incoming Trunk ACC: Access Code (Max. 5 digits) R/M: M (Remote Call Forwarding Cont...

Page 683 - The desired service station will be rung.

NEAX2400 IPX Feature Programming Manual Page 640 NDA-24297, Issue 1 S-1 Single-Digit Station Calling S-1 Single-Digit Station Calling General Description This feature allows the assignment of single digits for station numbers. Operating Procedure 1. Lift the handset; receive dial tone. 2. Dial the S...

Page 684 - Special Dial Tone; User may activate a service feature, such as:

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 641 Special Dial Tone S-2 S-2 Special Dial Tone General Description This feature provides a distinctive dial tone to a user after the switch hook has been pressed, enabling the user toactivate a specific service feature. Operating Proced...

Page 685 - Speed Calling - System; Speed Calling; A maximum of 1,000 codes can be assigned per NEAX2400 IPX system.; See SPEED CALLING OVERRIDE-SYSTEM

NEAX2400 IPX Feature Programming Manual Page 642 NDA-24297, Issue 1 S-3 Speed Calling - System S-3 Speed Calling - System General Description This feature allows a user or ATTENDANT CONSOLE [A-3] to call frequently dialed numbers using fewer digits(abbreviated call codes) than would normally be requ...

Page 686 - code of the route in the CD.; key. Assign FKY15 to the D; This command is used for assigning a function to each soft key.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 643 Speed Calling - System S-3 Programming STEP 1: ASYD - System Data 2, Index 1, bit 7. Does TOLL RESTRICTION [T-7] apply to SPEED CALLING-SYSTEM? 0/1: No/Yes. STEP 2: ANPD - Reserve a number level for feature access. Assign Connection ...

Page 687 - Originating a call from a D; To operate from a SPEED CALLING-ONE TOUCH key; XXX; Abbreviated Call Code

NEAX2400 IPX Feature Programming Manual Page 644 NDA-24297, Issue 1 S-3D Speed Calling - System - D term S-3D Speed Calling - System - D term General Description This feature allows a D term user to call frequently dialed numbers using fewer digits (abbreviated call codes) than would normally be req...

Page 689 - Splitting; To speak with the called party only

NEAX2400 IPX Feature Programming Manual Page 646 NDA-24297, Issue 1 S-4 Splitting S-4 Splitting General Description This feature allows the ATTENDANT CONSOLE [A-3] to speak privately with one party on an Attendant-handledconnection without the other party overhearing. Operating Procedure To speak wi...

Page 691 - While a conversation is in progress; Press the TRANSFER key hear special dial tone.; - Make idle the Digital Conference Trunk.

NEAX2400 IPX Feature Programming Manual Page 648 NDA-24297, Issue 1 S-4D Splitting - D term S-4D Splitting - D term General Description This feature allows a D term user to alternately converse between two separate parties while one party is connected and one party remains on hold. The user uses the...

Page 692 - Station-Controlled Conference; Conference connection is automatic.; Procedure 2; The conferee answers.; Each conference unit provides up to an 8-party conference.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 649 Station-Controlled Conference S-6 S-6 Station-Controlled Conference General Description This feature allows any NEAX2400 IPX station to establish a conference. The conference may be any combinationof stations and/or trunks (inside an...

Page 693 - assignments in ANPD, the station numbers will reside in level 3.; Conference Leader

NEAX2400 IPX Feature Programming Manual Page 650 NDA-24297, Issue 1 S-6 Station-Controlled Conference Programming STEP 1: ANPD - A number level must be reserved for station numbering plan. In an existing system, a station level will already be established. If a vacant level does exist, it may be use...

Page 694 - Station Hunting - Circular

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 651 Station Hunting - Circular S-7 S-7 Station Hunting - Circular General Description This feature permits a call to be processed automatically through a hunt group of busy extensions, in a programmedorder. Operating Procedure No manual ...

Page 695 - An ISDN terminal cannot hunt a call.

NEAX2400 IPX Feature Programming Manual Page 652 NDA-24297, Issue 1 S-7 Station Hunting - Circular Service Conditions (cont’d) 16. This feature will be activated whenever the hunt group is dialed or terminated under the followingconditions: a.) dialed from a stationb.) dialed from ATTENDANT CONSOLE ...

Page 696 - When all the stations in a Circular Hunt Group are busy:; Numbers under the stations show the assigned order.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 653 Station Hunting - Circular S-7 Service Conditions (cont’d) b.) When stations belonging to different nodes are assigned to a Circular Hunt Group, the station hunt is not activated in assigned order if the stations are not assigned in ...

Page 699 - ASHC; - Assign the required data for the STATION HUNTING-CIRCULAR Group.

NEAX2400 IPX Feature Programming Manual Page 656 NDA-24297, Issue 1 S-7 Station Hunting - Circular Interactions (cont’d) d.) A call forwarding-override call from Station B to Station A will hunt if Station A is busy. 5. STATION MESSAGE DETAIL RECORDING [S-10]: The number recorded is the telephone nu...

Page 700 - * Indicates the order of a station in the group.; When activating the Feature via LDM

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 657 Station Hunting - Circular S-7 Programming (cont’d) STEP 2: APHN - Assign Phantom Number (PHSTN) to each Circular Hunt Station (as necessary) TN: Tenant Number REAL STN: Station Number of the Circular Hunt station PH: Phantom Number ...

Page 702 - Station Hunting - Secretarial

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 659 Station Hunting - Secretarial S-8 S-8 Station Hunting - Secretarial General Description This feature allows calls to a Hunt group to forward to a secretarial station when all the stations in the group are busy. Operating Procedure No...

Page 704 - Station Hunting - Terminal

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 661 Station Hunting - Terminal S-9 S-9 Station Hunting - Terminal General Description This feature enables calls placed to busy stations, other than Pilot stations of a Hunt group, to receive a busy tonerather than proceed through the no...

Page 705 - pilot number via the APHNL command setting (see Interactions).

NEAX2400 IPX Feature Programming Manual Page 662 NDA-24297, Issue 1 S-9 Station Hunting - Terminal Service Conditions (cont’d) d.) A station can belong to one hunting group only; it cannot belong to another group including that for STATION HUNTING - CIRCULAR [S-7] or UNIFORM CALL DISTRIBUTION (UCD)[...

Page 706 - The number of the Hunt Group is unlimited.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 663 Station Hunting - Terminal S-9 Service Conditions (cont’d) b.) When stations belonging to different nodes are assigned to a Hunt group, the station hunt may not be activated in assigned order if the stations are not assigned in conti...

Page 707 - including that for STATION HUNTING

NEAX2400 IPX Feature Programming Manual Page 664 NDA-24297, Issue 1 S-9 Station Hunting - Terminal Service Conditions (cont’d) 27. STATION HUNTING - TERMINAL can be programmed on a node basis even in the use of telephonenumbers. In other words, the feature became available via the data written on th...

Page 708 - returned to the calling party.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 665 Station Hunting - Terminal S-9 Interactions (cont’d) c.) When hunting occurs, if Station A is the only idle station in the hunting pattern, a busy tone is returned to the calling party. d.) During a Call Forward-Override call from St...

Page 710 - feature is not provided when the PHTELN is dialed.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 667 Station Hunting - Terminal S-9 Interactions (cont’d) • When PH = 0: Station hunt starts by dialing the pilot station number (telephone number) only. The feature is not provided when the PHTELN is dialed. 9. The lead station is the fi...

Page 713 - RS232C Interface Conditions

NEAX2400 IPX Feature Programming Manual Page 670 NDA-24297, Issue 1 S-10 Station Message Detail Recording (SMDR) S-10 Station Message Detail Recording (SMDR) General Description This feature provides a call record for all outgoing station to trunk calls and incoming trunk to station calls. Whenthe s...

Page 715 - Additional hardware is required.

NEAX2400 IPX Feature Programming Manual Page 672 NDA-24297, Issue 1 S-10 Station Message Detail Recording (SMDR) Service Conditions (cont’d) 31. Additional hardware is required. 32. When either of the 2 parties goes On-Hook (or presses Transfer key, Hold key, Answer key, Over key)during Station-to-S...

Page 716 - Transmission of call base table with 220 bytes.; Example 1

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 673 Station Message Detail Recording (SMDR) S-10 Service Conditions (cont’d) 39. When a line connection is established on the FCCS link, the billing data concerned is collected fully in thecalled station-side node, not in the calling sta...

Page 717 - Example 2

NEAX2400 IPX Feature Programming Manual Page 674 NDA-24297, Issue 1 S-10 Station Message Detail Recording (SMDR) Service Conditions (cont’d) Example 2 • Node A tries to collect the billing information of Node B and Node C via FCCS, using the polling method(Node A cannot collect the billing informati...

Page 718 - Node A sends the billing information of Node A, Node B and Node C.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 675 Station Message Detail Recording (SMDR) S-10 Service Conditions (cont’d) Example 3 • Node A tries to collect the billing information of Node B via FCCS, using the polling method (Node Acannot collect the billing information of Node B...

Page 719 - Example 5

NEAX2400 IPX Feature Programming Manual Page 676 NDA-24297, Issue 1 S-10 Station Message Detail Recording (SMDR) Service Conditions (cont’d) Example 5 • Node A collects the billing information of Node B and Node C via FCCS, using the polling method (Billinginformation of Node B cannot be collected)....

Page 720 - Example 6; Node D sends the billing information to Node B.; SOCKET Interface (LAN Interface) Conditions; SMDR data can be output via LAN cable.; NEAX2400 IPX-UMG Conditions

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 677 Station Message Detail Recording (SMDR) S-10 Service Conditions (cont’d) Example 6 • Node A collects the billing information of Node B, Node C and Node D, which are stored in Node B bypolling method. • Node D sends the billing inform...

Page 721 - CALL FORWARDING

NEAX2400 IPX Feature Programming Manual Page 678 NDA-24297, Issue 1 S-10 Station Message Detail Recording (SMDR) Service Conditions (cont’d) 4. Assign Fusion Point Code (FPC) of new-Center Node to all node including ex-Center Node by usingASYDL command System Data 1 Index 577. Interactions 1. If LCR...

Page 722 - Index 291 = SMDR fault detect timer of SMDR B.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 679 Station Message Detail Recording (SMDR) S-10 Programming (cont’d) System Data 1, Index 32, Bit 6. Is the number sent or number dialed recorded in SMDR? 0/1: NumberSent/Number Dialed.System Data 1, Index 33. Assign this index for Spli...

Page 723 - This data is valid when the data is assigned at SYS1, Index 512.

NEAX2400 IPX Feature Programming Manual Page 680 NDA-24297, Issue 1 S-10 Station Message Detail Recording (SMDR) Programming (cont’d) Provided that “1” is flagging in Bit 0 of Index 576 (System Data 1), let every Local Node recognize itsbelonging Center Node for centralized billing-Fusion. Assign da...

Page 724 - INDEX

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 681 Station Message Detail Recording (SMDR) S-10 Programming After the Center Node (multiple CN: possible on a network) is assigned for centralized billing-Fusion,let the Center Node recognize its polling destination (specified by the FP...

Page 726 - ATDF

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 683 Station Message Detail Recording (SMDR) S-10 Programming (cont’d) STEP 7: ASFC - Assign data “1” to SFI 14 of a Service Feature Class, the traffic of which is to be registered on SMDR (Trunk Basis). Assign data “1” to SFI 58 of a Ser...

Page 727 - Dial the desired telephone number.; The maximum number of digits per telephone number is 16.; The ATNR command is required for all station-to-station calling.

NEAX2400 IPX Feature Programming Manual Page 684 NDA-24297, Issue 1 S-11 Station-to-Station Calling S-11 Station-to-Station Calling General Description This feature permits any user to directly dial another station within the NEAX2400 IPX system without operatorassistance. Operating Procedure 1. Lif...

Page 731 - Step Call; If Station 225 is idle, the call will be connected there.

NEAX2400 IPX Feature Programming Manual Page 688 NDA-24297, Issue 1 S-13 Step Call S-13 Step Call General Description This feature allows the Attendant or user, upon calling a busy station, to call an idle station by dialing an additionaldigit. This feature will operate only if the number of the idl...

Page 733 - Serial Call

NEAX2400 IPX Feature Programming Manual Page 690 NDA-24297, Issue 1 S-15 Serial Call S-15 Serial Call General Description This feature allows the Attendant to arrange for a recall from a station before releasing a Central Office call to thatstation. When the station subsequently disconnects from the...

Page 736 - Single-Digit Feature Code; Timing start is not available with this feature.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 693 Single-Digit Feature Code S-19 S-19 Single-Digit Feature Code General Description This feature allows the system to be programmed so that features used most frequently may be accessed by dialinga single digit. Operating Procedure To ...

Page 737 - Speed Calling - Station; Lift handset or press SPEAKER key receive dial tone.; If one digit code is used, the format must be 00 to 99.; Press the desired call code the call is completed.

NEAX2400 IPX Feature Programming Manual Page 694 NDA-24297, Issue 1 S-21 Speed Calling - Station S-21 Speed Calling - Station General Description This feature allows a user to dial certain frequently-called exchange network numbers using fewer digits(abbreviated call codes) than normally required. U...

Page 738 - A pause may be programmed, using the “; - Two access codes must be assigned for this feature.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 695 Speed Calling - Station S-21 Service Conditions (cont’d) 11. A pause may be programmed, using the “ * ” key of a PB pad. This will take one of the 24 digits available. Rotary type phones cannot store a pause. A pause lasts 2.8 second...

Page 740 - Speed Calling - Group; To record; To operate; Dial the SPEED CALLING feature access code.; A station can be assigned as a Primary station for only one group.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 697 Speed Calling - Group S-23 S-23 Speed Calling - Group General Description This feature allows a user to share a set of common Speed Calling numbers with other users in the group. Operating Procedure To record 1. Lift handset or press...

Page 741 - A pause may be programmed using the “

NEAX2400 IPX Feature Programming Manual Page 698 NDA-24297, Issue 1 S-23 Speed Calling - Group Service Conditions (cont’d) 11. SPEED CALLING-GROUP data remains, even if the system is re-initialized or there is a power failure. 12. A pause may be programmed using the “ * ” button of a PB pad. This wi...

Page 743 - Example: Saved Local Number

NEAX2400 IPX Feature Programming Manual Page 700 NDA-24297, Issue 1 S-24D Save And Repeat - D term S-24D Save And Repeat - D term General Description This feature allows for a D term set to save a specific dialed number and then redial that number later. Operating Procedure 1. Go off-hook, seize any...

Page 745 - TRANSFER XXXX XXXX; Transferring

NEAX2400 IPX Feature Programming Manual Page 702 NDA-24297, Issue 1 S-25D Service Display - D term S-25D Service Display - D term General Description This feature generates LCD displays corresponding to the various features as they are initiated. Operating Procedure Each display is automatically gen...

Page 746 - To program; 2 keys are available for the D

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 703 Speed Calling - One Touch - D term S-26D S-26D Speed Calling - One Touch - D term General Description This feature allows D term users to dial telephone numbers by pressing a single key. Up to 12/24 numbers may be programmed by the D...

Page 748 - Service Feature Peg Count; Refer to NEAX2400 IPX System Operations and Maintenance Manual.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 705 Service Feature Peg Count S-27 S-27 Service Feature Peg Count General Description This feature provides a statistical usage report on various features, generated at the MAINTENANCEADMINISTRATION TERMINAL (MAT) [M-18]. This report wil...

Page 749 - Refer to the following commands to order PEG COUNTS; ATRF; Type of Traffic Measurement

NEAX2400 IPX Feature Programming Manual Page 706 NDA-24297, Issue 1 S-27 Service Feature Peg Count Service Conditions (cont’d) 17. SPEED CALLING ACCESS-GROUP [S-23] count: Number of times a variable abbreviated number isregistered by stations for which the feature is allowed. 18. TRUNK ANSWER FROM A...

Page 750 - TYPE: Type of Traffic Measurement

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 707 Service Feature Peg Count S-27 Programming (cont’d) 10: UCD Station Peg Count11: CCIS Traffic Count STEP 3: TYPEs not listed, are not used. Display of Traffic Data 1 (DTF1) TYPE: Type of Traffic Measurement 1: Terminal Traffic2: Rout...

Page 751 - Software Line Appearance; Line; Call Origination via a SOFTWARE LINE APPEARANCE on a D

NEAX2400 IPX Feature Programming Manual Page 708 NDA-24297, Issue 1 S-33 Software Line Appearance S-33 Software Line Appearance General Description This feature permits ports that do not physically exist to be used as sub-lines on D term stations. Ports normally reserved on a D term for data station...

Page 753 - Speed Calling Override - System; Lift the handset (includes SPEAKER key operation on D; Press the desired call code.; This feature cannot be used in MFC signaling.

NEAX2400 IPX Feature Programming Manual Page 710 NDA-24297, Issue 1 S-61 Speed Calling Override - System S-61 Speed Calling Override - System General Description This feature allows numbers programmed for SPEED CALLING to be available to stations on a system-wide basis,determined by Service Feature ...

Page 754 - access code of the route in the CD.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 711 Speed Calling Override - System S-61 Programming STEP 1: ASYD - System Data 2, Index 1, Bit 6. Is SPEED CALLING OVERRIDE-SYSTEM to be enabled? 0/ 1: No/Yes. System Data 2, Index 1, Bit 7. Toll Restriction for SPEED CALLING-SYSTEM [S-...

Page 755 - Station 5db PAD; STATION 5db PAD is inserted into the called party of the station.

NEAX2400 IPX Feature Programming Manual Page 712 NDA-24297, Issue 1 S-62 Station 5db PAD S-62 Station 5db PAD General Description This feature allows a single-line user to be affected by the 5db loss through the system on station-to-station calls. Operating Procedure No manual operation is required ...

Page 756 - Serial Call - Loop Release; The Attendant answers an incoming Central Office call.; CALL FORWARDING-DON’T ANSWER; See SERIAL CALL

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 713 Serial Call - Loop Release S-64 S-64 Serial Call - Loop Release General Description This feature allows an ATTENDANT CONSOLE loop key to become available after setting SERIAL CALL [S-15]. Operating Procedure 1. The Attendant answers ...

Page 758 - Split Call Forwarding

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 715 Split Call Forwarding S-99 S-99 Split Call Forwarding General Description This feature allows a station to set two different target stations for CALL FORWARDING-ALL CALLS(FORWARD)/BUSY LINE (FORWARD-BY)/DON’T ANSWER (FORWARD-DA), dep...

Page 759 - To set SPLIT CALL FORWARDING using D; feature key

NEAX2400 IPX Feature Programming Manual Page 716 NDA-24297, Issue 1 S-99 Split Call Forwarding Operating Procedure (cont’d) To set SPLIT CALL FORWARDING using D term feature key To set Call Forwarding from an individual station (D term ) 1. Setting Call Forwarding for an incoming call from a station...

Page 760 - When the destination is an outside trunk, the D; To cancel Call Forwarding from an individual station (D; Cancelling Call Forwarding for an incoming call from a station:; To monitor the assigned data using the D; a.) Confirm that the LED of the PAGE feature key on the D; FORWARD SET XXXXX

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 717 Split Call Forwarding S-99 Operating Procedure (cont’d) When the destination is an outside trunk, the D term displays: To cancel Call Forwarding from an individual station (D term ) 1. Cancelling Call Forwarding for an incoming call ...

Page 761 - To set Call Forwarding from the Attendant Console; FWD SET OPR

NEAX2400 IPX Feature Programming Manual Page 718 NDA-24297, Issue 1 S-99 Split Call Forwarding Operating Procedure (cont’d) When the destination is an ATTENDANT CONSOLE, the D term displays: When the destination is an outside trunk, the D term displays: 2. To monitor the assigned data for station-to...

Page 762 - To cancel Call Forwarding from the Attendant Console; This service can be set from the Attendant Console.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 719 Split Call Forwarding S-99 Operating Procedure (cont’d) To cancel Call Forwarding from the Attendant Console 1. Cancelling Call Forwarding for an incoming call from a station: a.) Press an idle loop key and dial the cancel code for F...

Page 764 - - This feature can be set by this command.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 721 Split Call Forwarding S-99 Programming (cont’d) SN=1, FKY=2: Call Forwarding - All Calls (FDA)SN=1, FKY=22: Call Forwarding - Don’t Answer (FDN) SN=1, FKY=55: Call Forwarding - One - Touch Changeover (PAGE)This command is used for as...

Page 765 - Slumber Time - Do Not Disturb

NEAX2400 IPX Feature Programming Manual Page 722 NDA-24297, Issue 1 S-106 Slumber Time - Do Not Disturb S-106 Slumber Time - Do Not Disturb General Description This service allows a slumber time for up to four times per day on a Station group basis. During the slumber time,all stations in the group ...

Page 766 - MBTK

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 723 Slumber Time - Do Not Disturb S-106 Service Conditions (cont’d) 16. CALL BACK [C-1] and CALL WAITING-ORIGINATING [C-31] can be set from a Slumber Timestation. 17. Each of the following services is restricted to a Slumber Time station...

Page 768 - For the D

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 725 Serial Call - D term S-127 S-127 Serial Call - D term General Description This feature allows the D term user to set SERIAL CALL to the central office line/tie line call and extend the call to the desired station/trunk. When the comm...

Page 771 - No output information:

NEAX2400 IPX Feature Programming Manual Page 728 NDA-24297, Issue 1 S-129 SMDR Output Expansion - ANI/CPN S-129 SMDR Output Expansion - ANI/CPN General Description This feature expands SMDR information output, by which calling numbers from Central Office may be output tothe expanded area. Operating ...

Page 774 - the former/latter part of data appears on the LCD.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 731 SMDR Output Expansion - ANI/CPN S-129 FCCS Programming This data setting describes only the additional or replacement commands used to activate FCCSservices. When used as an FCCS feature, these commands replace the non-network comman...

Page 776 - Lift the handset receive dial tone from the distant office.; Dial an extension number of the distant PBX.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 733 Tandem Switching of TIE Trunks - 2/4-Wire T-1 T-1 Tandem Switching of TIE Trunks - 2/4-Wire General Description This feature allows trunk-to-trunk connections through the switching system, without the need for any Attendantassistance...

Page 778 - LINE CONNECTION WITH PAD CONTROL

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 735 Tandem Switching of TIE Trunks - 2/4-Wire T-1 FCCS Programming (cont’d) STEP 4: ARRCN - Assign to the system trunk-to-trunk connection. Use Alternative Route Index (ARI-D-RES) for Direct Connection. Three possible Restrictions may be...

Page 779 - When the Consultation Hold service is used

NEAX2400 IPX Feature Programming Manual Page 736 NDA-24297, Issue 1 T-2 Three-Way Calling T-2 Three-Way Calling General Description This feature enables any user to add another party to an existing connection, establishing a three-way conference. Even if the additional D term user holds the call, TH...

Page 780 - - Make idle the Digital Conference Trunk

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 737 Three-Way Calling T-2 Interactions 1. A station in an established three-way connection cannot flash the switch hook to activate a feature. Theflash disconnects the last party connected. 2. All three-way calls are protected by privacy...

Page 781 - CONF

NEAX2400 IPX Feature Programming Manual Page 738 NDA-24297, Issue 1 T-2D Three-Way Calling - D term T-2D Three-Way Calling - D term General Description This feature enables a D term user to establish a three-way conference by connecting an additional party to an already existing conversation. Even i...

Page 784 - TIE Line Access; This feature allows any user dial access to a TIE Line.; Dial the desired extension number.; For senderized TIE Lines, see UNIVERSAL SENDER

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 741 TIE Line Access T-3 T-3 TIE Line Access General Description This feature allows any user dial access to a TIE Line. Operating Procedure 1. Lift the handset; receive dial tone. 2. Dial the TIE LINE ACCESS code; receive dial tone from ...

Page 786 - TIE Line Connection With Pad Control; APAD; Kind of Connection

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 743 TIE Line Connection With Pad Control T-5 T-5 TIE Line Connection With Pad Control General Description This feature provides a switchable transmission pad on TIE trunks that allows tandem connections. Necessary padcontrol is activated...

Page 788 - Toll Denial/Toll Diversion; Diversion

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 745 Toll Denial/Toll Diversion T-6 T-6 Toll Denial/Toll Diversion General Description This feature prohibits users from placing long distance calls over a specific group of trunks. Restricted calls arerouted to either an ATTENDANT CONSOL...

Page 794 - Toll Restriction Examples; Several examples of the use of TOLL RESTRICTION are listed below:

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 751 Toll Restriction - 3/6-Digit T-7 Programming (cont’d) Toll Restriction Examples Several examples of the use of TOLL RESTRICTION are listed below: RSC 1: Allow local only. RSC 2: Allow local plus Area Codes 718, 212, 201, and 914. RSC...

Page 797 - Incoming Route Number

NEAX2400 IPX Feature Programming Manual Page 754 NDA-24297, Issue 1 T-7 Toll Restriction - 3/6-Digit Programming (cont’d) ATDP Command-TDM/OG: O (Outgoing Connection) DAY/NIGHT: D (Day)OGRT: 1 RSC: 5 DC: 92 TDI: 1 (Connection is Allowed) Repeat these same assignments for Digit Codes “93” through “99...

Page 799 - Dial the specified TAS access code.; The TAS indicator can be provided on a per-tenant basis.

NEAX2400 IPX Feature Programming Manual Page 756 NDA-24297, Issue 1 T-8 Trunk Answer from Any Station (TAS) T-8 Trunk Answer from Any Station (TAS) General Description This feature allows any station (except one with incoming restrictions) to answer incoming calls when the system isin Night Mode. In...

Page 800 - ANSWER FROM ANY STATION.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 757 Trunk Answer from Any Station (TAS) T-8 Interactions (cont’d) 4. CALL TRANSFER-ALL CALLS [C-11]: A station answering a call via the TAS feature will have accessto the transfer feature. 5. CENTRALIZED ATTENDANT SERVICE (CAS) [C-20]: T...

Page 802 - Trunk Group Busy Lamp

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 759 Trunk Group Busy Lamp T-9 T-9 Trunk Group Busy Lamp General Description This feature provides the ATTENDANT CONSOLE [A-3] with a visual indication when all trunks in a particulartrunk group are busy (LDN, WATS, FX, DOD, CCSA, TIE or ...

Page 803 - TGBL information based on External Route data (ATGL command); - Assign the Make Idle status to the trunk assigned in Step 3.

NEAX2400 IPX Feature Programming Manual Page 760 NDA-24297, Issue 1 T-9 Trunk Group Busy Lamp Programming (cont’d) TGBL data can be collected/transmitted from/to all LMGs by the circuit card DLMX (PA-PC94) viaDLKC circuit cards in the IPX-U. For more detailed information, see the NEAX2400 IPX Office...

Page 804 - Connection; Place incoming caller on hold.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 761 Trunk-to-Trunk Connection T-10 T-10 Trunk-to-Trunk Connection General Description This feature provides any user with the ability to conference together either two Central Office calls or a CentralOffice and TIE Line call. Operating ...

Page 807 - Tenant Service; Different tenants cannot use the same numbering plan.

NEAX2400 IPX Feature Programming Manual Page 764 NDA-24297, Issue 1 T-12 Tenant Service T-12 Tenant Service General Description This feature provides for more than one organization (tenant) to share the same PBX. Through system programming,each organization may be restricted to its own Central Offic...

Page 809 - Day/Night Mode Change Restriction is not used in North America.; - Make idle the Attendant Console trunks.

NEAX2400 IPX Feature Programming Manual Page 766 NDA-24297, Issue 1 T-12 Tenant Service Programming (cont’d) 2: Not used. 3: Allows the CALL FORWARDING-ALL CALLS, DON’T ANSWER, andBUSY LINE on an intra and inter-tenant basis as when set by the AttendantConsole. 4: Allows or restricts incoming calls ...

Page 810 - ATIMN

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 767 Time Display - D term T-18D T-18D Time Display - D term General Description This feature provides a digital time display on a D term ’s LCD. Operating Procedure No manual operation is required. Service Conditions 1. The time is displ...

Page 811 - Trunk Line Appearance; To access an outgoing trunk

NEAX2400 IPX Feature Programming Manual Page 768 NDA-24297, Issue 1 T-23 Trunk Line Appearance T-23 Trunk Line Appearance General Description This feature allows a D term user to directly access a Central Office trunk or TIE Line without dialing an access code. Incoming calls can also be answered at...

Page 813 - Switch hook flash receive special dial tone.; If a Broker’s Call has been activated by a D

NEAX2400 IPX Feature Programming Manual Page 770 NDA-24297, Issue 1 T-28 Trunk-to-Trunk Third-Party Cancellation T-28 Trunk-to-Trunk Third-Party Cancellation General Description This feature allows a station to cancel an active trunk-to-trunk connection (during a three-way-connection) andreturn to t...

Page 815 - Timed Reminder; To set a Timed Reminder call; When the announcement trunk is blocked, the user receives music.

NEAX2400 IPX Feature Programming Manual Page 772 NDA-24297, Issue 1 T-62 Timed Reminder T-62 Timed Reminder General Description This feature allows a user to set a Timed Reminder call from the station. The system calls up the station at thedesignated time. When the station answers the call, the user...

Page 817 - Tone Block; To set the service

NEAX2400 IPX Feature Programming Manual Page 774 NDA-24297, Issue 1 T-63 Tone Block T-63 Tone Block General Description This feature allows the user of a station (via analog adapter) or an analog station (PB) to restrict any call. Thisprevents interruption of data transmission, before the connection...

Page 818 - - Assign the access code for Tone Block as shown below:; =DT is sent after dialing the access code for this service.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 775 Tone Block T-63 Programming STEP 1: ANPD - Reserve a number level for feature access and cancel. Assign for Normal, (N) and Hooking (H). Assign NND in accordance with a predetermined numbering plan. STEP 2: ASPA - Assign the access c...

Page 819 - To transfer a call to a busy UCD group

NEAX2400 IPX Feature Programming Manual Page 776 NDA-24297, Issue 1 U-1 Uniform Call Distribution (UCD) U-1 Uniform Call Distribution (UCD) General Description This feature distributes incoming calls to a UCD group of up to 100 stations. Calls are distributed to idle stations ina circular pattern, i...

Page 821 - Count of incoming calls to each station in each group

NEAX2400 IPX Feature Programming Manual Page 778 NDA-24297, Issue 1 U-1 Uniform Call Distribution (UCD) Service Conditions (cont’d) Example: c.) UCD station peg count: • Count of incoming calls to each station in each group • Count of answered calls • Count of other calls (abandoned, restricted, blo...

Page 823 - Physical Station Number:

NEAX2400 IPX Feature Programming Manual Page 780 NDA-24297, Issue 1 U-1 Uniform Call Distribution (UCD) Service Conditions (cont’d) 36. When activating this feature via the FCCS network, the maximum number of the UCD groups in a nodeis 63. 37. When activating this feature via the FCCS network, the s...

Page 825 - the hunting function is completed at the terminated station.; for

NEAX2400 IPX Feature Programming Manual Page 782 NDA-24297, Issue 1 U-1 Uniform Call Distribution (UCD) Service Conditions (cont’d) c.) When the CCIS line is used as the alternative routing, SERVICE DISPLAY is not activated and the hunting function is completed at the terminated station. 49. When us...

Page 828 - Sender

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 785 Universal Sender U-3 U-3 Universal Sender General Description This feature permits dialed numbers to be transmitted via a sender, a device that will automatically add or delete thenecessary number of digits or perform any necessary c...

Page 829 - Universal Sender; - Assign the Make Idle status to the sender trunks.

NEAX2400 IPX Feature Programming Manual Page 786 NDA-24297, Issue 1 U-3 Universal Sender Programming (cont’d) STEP 2: MBTK - Assign the Make Idle status to the sender trunks.

Page 830 - Variable Timing Parameters

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 787 Variable Timing Parameters V-1 V-1 Variable Timing Parameters General Description The Variable Timing Parameters feature gives the PBX the versatility to change timing parameters, using theMAINTENANCE ADMINISTRATION TERMINAL (MAT) [M...

Page 833 - From a single line station to a D; For a Single-Line Set

NEAX2400 IPX Feature Programming Manual Page 790 NDA-24297, Issue 1 V-2 Voice Call V-2 Voice Call General Description This feature enables a single line telephone to make a VOICE CALL [V-2] when the called party is a D term set. This path exists from the calling party to the called party's built-in ...

Page 834 - Voice Call; For a D

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 791 Voice Call V-2 Programming (cont’d) For a D term STEP 1: AKYD - Assign the station according to the following parameters: TN: 1 STN: Station Number TP: Type of D term 0/1: RING: 0: No Ringing1: Ringing All Lines2: Ringing on Prime Li...

Page 835 - From one D; to another D; From a single-line set to a D; VOICE; Called Number

NEAX2400 IPX Feature Programming Manual Page 792 NDA-24297, Issue 1 V-2D Voice Call - D term V-2D Voice Call - D term General Description This feature provides a voice path between two D term sets. This path exits from the calling party to the called party’s built-in speaker. If the called party’s M...

Page 836 - Operating with the feature key; Operating with the access code

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 793 Voice Call - D term V-2D Interactions A Voice Call cannot be sent to a single-line station. Programming Operating with the feature key STEP 1: AKYD - Assign the station according to the following parameters: TN: 1 STN: Station Number...

Page 838 - WATS Access

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 795 WATS Access W-1 W-1 WATS Access General Description This feature permits any user direct-dial access to outgoing WATS lines. Operating Procedure 1. Lift the handset; receive dial tone. 2. Dial the WATS ACCESS code. 3. Receive second ...

Page 840 - connection is available only if the NEAX2000 IVS; Network Configuration; system may accommodate up to

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 797 Networking with NEAX2400 IPX and NEAX2000 IVS 2 Networking with NEAX2400 IPX and NEAX2000 IVS 2 General Description The following explains connectivity issues between a NEAX2400 IPX and a NEAX2000 IVS 2 . An FCCS Group consists of a ...

Page 841 - FCCS Network Group; The network consists of FCCS groups and NEAX2000 IVS

NEAX2400 IPX Feature Programming Manual Page 798 NDA-24297, Issue 1 Networking with NEAX2400 IPX and NEAX2000 IVS 2 Service Conditions (cont’d) FCCS Network Group 1. Since multiple FCCS networks are connected in the network, an FCCS network group number is requiredto distinguish each FCCS network fr...

Page 842 - Asynchronous Data Switching - CCIS

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 799 Asynchronous Data Switching - CCIS A-44 A-44 Asynchronous Data Switching - CCIS General Description The NEAX2400 IPX supports up to 19.2 Kbps asynchronous switched modem-less data communication, from nodeto node, in a CCIS network. A...

Page 843 - Additional hardware is required for 19.2 Kbps.; For Data Adapter

NEAX2400 IPX Feature Programming Manual Page 800 NDA-24297, Issue 1 A-44 Asynchronous Data Switching - CCIS Operating Procedure (cont’d) When the opposite end DTE disconnects when using keyboard dialing 1. When the opposite end DTE releases, the Data Adapter buzzer will sound three times. 2. Enter r...

Page 845 - Attendant Camp-On with Tone Indication - CCIS

NEAX2400 IPX Feature Programming Manual Page 802 NDA-24297, Issue 1 A-45 Attendant Camp-On with Tone Indication - CCIS A-45 Attendant Camp-On with Tone Indication - CCIS General Description This service feature allows Inter-Office Attendant Camp-On for when the Attendant and the called party belong ...

Page 849 - To activate ATTENDANT-CONTROLLED CONFERENCE - CCIS; A station calls the Attendant to request a conference.; Using the MMCB; Each Conference Unit can provide up to an eight-party conference.

NEAX2400 IPX Feature Programming Manual Page 806 NDA-24297, Issue 1 A-46 Attendant-Controlled Conference - CCIS A-46 Attendant-Controlled Conference - CCIS General Description This feature allows the Attendant to establish a conference among as many as eight parties. The conference groupcan consist ...

Page 850 - 3: Data Terminal via D; 7: Eight Conference Equipment

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 807 Attendant-Controlled Conference - CCIS A-46 Interactions 1. The Attendant Console must first be provided. 2. NEC provides a PA-16LCBE circuit card that provides momentary-open for all 16 circuits. This isrequired to provide a release...

Page 851 - Automatic Recall - CCIS

NEAX2400 IPX Feature Programming Manual Page 808 NDA-24297, Issue 1 A-71 Automatic Recall - CCIS A-71 Automatic Recall - CCIS General Description This service feature works as a time reminder. When an attendant-handled call through CCIS remains on hold,camped-on or ringing unanswered for a fixed int...

Page 852 - Must be programmed as data “1”. Attendant Loop Release in service.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 809 Automatic Recall - CCIS A-71 Interactions (cont’d) 5. The station will continue to ring, even as the call recalls to the Attendant Console. When conference isallowed and a conference card is programmed and installed, if the station s...

Page 853 - No manual operation is necessary.; Sending digit patterns in Enhanced 911 ANI - CCIS:

NEAX2400 IPX Feature Programming Manual Page 810 NDA-24297, Issue 1 A-87 Automatic Number Identification (ANI) - CCIS A-87 Automatic Number Identification (ANI) - CCIS General Description This service is an enhancement from AUTOMATIC NUMBER IDENTIFICATION (ANI), which can be executedonly within the ...

Page 855 - After digits have been sent out, DDD seizure tone is not sent.

NEAX2400 IPX Feature Programming Manual Page 812 NDA-24297, Issue 1 A-87 Automatic Number Identification (ANI) - CCIS Service Conditions (cont’d) Station number: 2xxx, 3xxxThe COC digits are 822 or 823; then assign ANI information.Example 2:Office number: 82, 826Station number: 34xxx, 4xxxThe COC di...

Page 858 - Busy Verification - CCIS

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 815 Busy Verification - CCIS B-9 B-9 Busy Verification - CCIS General Description This service feature allows Inter-Office Attendant BUSY VERIFICATION when the Attendant and the called partyrespectively belong to a different PBX in the C...

Page 862 - Brokerage Hotline - CCIS; To access from a D

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 819 Brokerage Hotline - CCIS B-10 B-10 Brokerage Hotline - CCIS General Description This feature provides a hotline function between two stations at different nodes in the CCIS network, using a line/feature key of a D term . Operating Pr...

Page 865 - To set from a Single-Line Telephone; To cancel from a Single-Line Telephone; To cancel from an 8-button or 16-button D; Executive Terminal; CALL BACK SET; CALL BACK XXXX

NEAX2400 IPX Feature Programming Manual Page 822 NDA-24297, Issue 1 C-44 Call Back - CCIS C-44 Call Back - CCIS General Description This service feature allows an Inter-office Call Back when the calling station and the called station respectivelybelong to a different PBX in the CCIS network. Operati...

Page 866 - CALL BACK CANCEL

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 823 Call Back - CCIS C-44 Operating Procedure (cont’d) 3. The LCD will display: Service Conditions 1. If CALL BACK is not answered within 30 seconds, or the timer interval in ASYD index 139, ringing willstop and the CALL BACK will automa...

Page 867 - CALL BACK - CCIS cannot be activated toward the Attendant Console.; that is holding a call or; sets, CALL BACK - CCIS may be assigned to a programmable line/feature

NEAX2400 IPX Feature Programming Manual Page 824 NDA-24297, Issue 1 C-44 Call Back - CCIS Interactions 1. OUTGOING TRUNK QUEUING [O-2] and CALL BACK - CCIS cannot be accessed simultaneously. 2. System Data 1, Index 139. No Answer Timer is also used for station-to-station call, DID, or TIE Line callf...

Page 868 - When setting Call Forwarding-All Calls Service

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 825 Call Forwarding - All Calls - CCIS C-45 C-45 Call Forwarding - All Calls - CCIS General Description This service feature allows Inter-Office CALL FORWARDING-ALL CALLS when the transferring station and thetransferred station, respecti...

Page 869 - Station B answers Stations B and C are connected with each other.; When cancelling Call Forwarding-All Calls Service

NEAX2400 IPX Feature Programming Manual Page 826 NDA-24297, Issue 1 C-45 Call Forwarding - All Calls - CCIS Operating Procedure (cont’d) 5. Station A is called from Station C. The call is automatically transferred to Station B, which Station A hasdesignated as the call destination. Station C receive...

Page 872 - can be

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 829 Call Forwarding - All Calls - CCIS C-45 Service Conditions (cont’d) d.) A Central Office call is directed to Station B. Station B is set to CALL FORWARDING-ALL CALLS - CCIS to Station C. Station C is set to CALL FORWARDING-ALL CALLS ...

Page 873 - Call forwarding can only be activated from an idle station.

NEAX2400 IPX Feature Programming Manual Page 830 NDA-24297, Issue 1 C-45 Call Forwarding - All Calls - CCIS Service Conditions (cont’d) 17. When OUTGOING TRUNK QUEUING - CCIS [O-12] is provided, the forwarding station can use oneof the call forwarding features and OUTGOING TRUNK QUEUING - CCIS [O-12...

Page 875 - When setting call Forwarding-Busy Line Service; Station A is engaging in a call with Station C through a CCIS line.

NEAX2400 IPX Feature Programming Manual Page 832 NDA-24297, Issue 1 C-46 Call Forwarding - Busy Line - CCIS C-46 Call Forwarding - Busy Line - CCIS General Description This service feature allows Inter-Office Call Forwarding-Busy Line for a case where the transferring station and thetransferred stat...

Page 876 - When cancelling CALL FORWARDING-BUSY LINE service

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 833 Call Forwarding - Busy Line - CCIS C-46 Operating Procedure (cont’d) 6. Station A is called from Station D through a CCIS line. The call is automatically transferred to Station Bwhich Station A has designated as the call destination....

Page 883 - When setting

NEAX2400 IPX Feature Programming Manual Page 840 NDA-24297, Issue 1 C-47 Call Forwarding - Don’t Answer - CCIS C-47 Call Forwarding - Don’t Answer - CCIS General Description This service feature allows Inter-Office Call Forwarding-Don’t Answer for a case where the transferring station andthe transfe...

Page 885 - When cancelling; Station D. Call forwarding does occur to Station D.

NEAX2400 IPX Feature Programming Manual Page 842 NDA-24297, Issue 1 C-47 Call Forwarding - Don’t Answer - CCIS Operating Procedure (cont’d) When cancelling 1. Station A goes off-hook; receives dial tone. 2. Station A dials the Cancel Code of CALL FORWARDING-DON’T ANSWER; receives service set tone. 3...

Page 888 - to equip it for both features.; via the dial pad or; If the CALL FORWARDING-DON’T ANSWER - CCIS target station is a D; which has activated DO

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 845 Call Forwarding - Don’t Answer - CCIS C-47 Service Conditions (cont’d) 14. When an Attendant extends a call to a station in another node in the CCIS network, and that station hasset CALL FORWARDING-DON’T ANSWER - CCIS, the call will ...

Page 889 - sets, CALL FORWARDING-DON’T ANSWER - CCIS may be assigned to a

NEAX2400 IPX Feature Programming Manual Page 846 NDA-24297, Issue 1 C-47 Call Forwarding - Don’t Answer - CCIS Programming STEP 1: ASYD - System Data 1, Index 5, Bit 0. Access codes for CALL FORWARDING-BUSY LINE - CCIS and CALL FORWARDING-DON’T ANSWER - CCIS are same or separate? 0/1: Same/Separate....

Page 891 - UNUSED NUMBER

NEAX2400 IPX Feature Programming Manual Page 848 NDA-24297, Issue 1 C-48 Call Forwarding - Intercept - CCIS Programming (cont’d) STEP 3: MBTK - Assign the Make Idle status to the Announcement Trunk. Note: If supervision is required, use the first two circuits of the COT card. Move the switch on the ...

Page 894 - Station A and C are in connection on a station-to-station call.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 851 Call Transfer - All Calls - CCIS C-50 C-50 Call Transfer - All Calls - CCIS General Description This service feature allows Inter-Office CALL TRANSFER-ALL CALLS when the transferring station and thetransferred station respectively be...

Page 895 - Station B answers the call

NEAX2400 IPX Feature Programming Manual Page 852 NDA-24297, Issue 1 C-50 Call Transfer - All Calls - CCIS Operating Procedure (cont’d) 3. Station A dials the number for B; receives ringback tone. Station B is rung. Note 1 Note 1: The status of Station A can be restored to normal with a switch hook f...

Page 898 - follow CALL FORWARDING-BUSY LINE or ALL CALLS if set.; elapse of the Recall Timer.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 855 Call Transfer - All Calls - CCIS C-50 Interactions (cont’d) 4. Upon establishing a CONSULTATION HOLD [C-58] connection and dialing a third party, if the userreceives busy or reorder tone instead of ringback tone, the user flashes onc...

Page 899 - Called Station Status Display - CCIS; If the called station is busy, the LCD displays:; No programming is needed.; BUSY XXXX

NEAX2400 IPX Feature Programming Manual Page 856 NDA-24297, Issue 1 C-51 Called Station Status Display - CCIS C-51 Called Station Status Display - CCIS General Description This feature provides for the status of a called station to appear on the LCD display of a calling D term using CCIS. Operating ...

Page 900 - Calling Number Display

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 857 Calling/Called Number Display - CCIS C-52 C-52 Calling/Called Number Display - CCIS General Description This service feature allows an Inter-Office calling/called number display when the Attendant Console and thecalling/called party ...

Page 901 - For the Attendant Console; At the time of call origination:

NEAX2400 IPX Feature Programming Manual Page 858 NDA-24297, Issue 1 C-52 Calling/Called Number Display - CCIS Operating Procedure (cont’d) 2. The Attendant presses the ANSWER key; Station B and the Attendant are connected. The number ofStation B is displayed on the Attendant Console. Service Conditi...

Page 902 - Call Processing Indication - CCIS; Refer to the operation guide of the Attendant Console.; and DIGITAL DISPLAY - TRUNK

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 859 Call Processing Indication - CCIS C-53 C-53 Call Processing Indication - CCIS General Description This feature provides a visual indication at the ATTENDANT CONSOLE [A-3] of all CCIS calls being handled bythe ATTENDANT CONSOLE [A-3] ...

Page 903 - To transfer a call to an Attendant Console; Dial the Operator Access Code.; To answer from the Attendant Console

NEAX2400 IPX Feature Programming Manual Page 860 NDA-24297, Issue 1 C-54 Call Transfer - Attendant - CCIS C-54 Call Transfer - Attendant - CCIS General Description This feature allows a user to transfer a call through the CCIS network to an Attendant Console located in a Main orSatellite node, while...

Page 904 - A call transfer to a D; CALL FORWARDING-BUSY LINE or ALL CALLS if set.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 861 Call Transfer - Attendant - CCIS C-54 Interactions (cont’d) 4. A call transfer to a D term that has DO NOT DISTURB [D-21D] set will receive reorder tone, or follow CALL FORWARDING-BUSY LINE or ALL CALLS if set. Programming STEP 1: AS...

Page 905 - Centralized Billing - CCIS; s are

NEAX2400 IPX Feature Programming Manual Page 862 NDA-24297, Issue 1 C-55 Centralized Billing - CCIS C-55 Centralized Billing - CCIS General Description This service is used for collecting billing information from each office within the network and directing it toassociated offices, thus providing th...

Page 907 - Information storage capacity of the office should be 700 calls.

NEAX2400 IPX Feature Programming Manual Page 864 NDA-24297, Issue 1 C-55 Centralized Billing - CCIS Operating Procedure (cont’d) 5. Station C goes off-hook; Stations B and C are connected in conversation. 6. Stations C and B go on-hook; SMDR information is sent to the Billing Center through the CCIS...

Page 910 - Assign data “1” at the Main Node.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 867 Centralized Day/Night Mode Change - CCIS C-56 Service Conditions (cont’d) 2. DAY/NIGHT mode changeover will be performed in one-minute increments. If consistency between theDAY/NIGHT mode at the Main and Satellite Nodes is lost, the ...

Page 911 - Centralized System Management Report - CCIS; C-57 Centralized System Management Report - CCIS

NEAX2400 IPX Feature Programming Manual Page 868 NDA-24297, Issue 1 C-57 Centralized System Management Report - CCIS C-57 Centralized System Management Report - CCIS General Description This service feature provides automatic reporting of fault information of Satellite Nodes to the CentralizedManage...

Page 913 - Data Assignment for Alarm grade change

NEAX2400 IPX Feature Programming Manual Page 870 NDA-24297, Issue 1 C-57 Centralized System Management Report - CCIS Programming (cont’d) System 1, Index 86, Bit 4. Assign Fault Data Automatic Printout Function (Automatic output to thePrinter) (1).System 1, Index 86, Bit 7: Assign Fault Message-0/1:...

Page 914 - Centralized MAT; , see the manual for NEAX2000 IVS

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 871 Centralized System Management Report - CCIS C-57 Programming (cont’d) The following figure represents an example of data programming. For details of CentralizedMaintenance for FCCS service, see the NEAX2400 IPX Fusion Network System ...

Page 915 - To return to the original call from a single-line telephone

NEAX2400 IPX Feature Programming Manual Page 872 NDA-24297, Issue 1 C-58 Consultation Hold - All Calls - CCIS C-58 Consultation Hold - All Calls - CCIS General Description This feature permits a user within the CCIS network to hold any incoming or outgoing public network, intra-office,or CCIS call w...

Page 918 - Call Forwarding Assignment - Attendant - CCIS; To set Call Forwarding

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 875 Call Forwarding Assignment - Attendant - CCIS C-94 C-94 Call Forwarding Assignment - Attendant - CCIS General Description This feature allows the attendant of an Attendant Console to set/cancel the following Call Forwarding services ...

Page 920 - CCIS Networking via IP; Tandem Path through function is not provided.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 877 CCIS Networking via IP C-163 C-163 CCIS Networking via IP General Description This feature allows the system to utilize the CCIS network over Internet/Intranet. To establish or release a call, anIPTRK card is used for both speech and...

Page 921 - SERVICE FEATURE NAME

NEAX2400 IPX Feature Programming Manual Page 878 NDA-24297, Issue 1 C-163 CCIS Networking via IP Service Conditions (cont’d) 10. The table below shows CCIS service features to be provided beyond the nodes: 11. This feature does not support Broad Band Services H0/H1. 12. This feature can use Link Re-...

Page 922 - AGIP

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 879 CCIS Networking via IP C-163 Programming STEP 1: Referring to the NEAX2400 IPX No. 7 CCIS System Manual, assign the entire basic data (such asASYD, ARTD, ATRK, ADPC, ACSC, ACIC1, ACIC2, MBTK, etc.) necessary for the establishmentof a...

Page 923 - Centralized Maintenance - CCIS; Series 2000 or later software.

NEAX2400 IPX Feature Programming Manual Page 880 NDA-24297, Issue 1 C-167 Centralized Maintenance - CCIS C-167 Centralized Maintenance - CCIS General Description This FCCS service allows all nodes (NEAX2400 IPX systems) in the multiple FCCS groups (networks wheremultiple NEAX2400 IPXs are connected ...

Page 924 - Assign the following data at the NCN in each FCCS group (FUG); AFUGN; - Assign the data related to FUG number; AEXFN; - Assign the Point Code data for connecting to each FPC in FUG.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 881 Centralized Maintenance - CCIS C-167 FCCS Programming This data setting describes only the additional or replacement commands used to activate FCCSservices. When used as an FCCS feature, these commands replace the non-network command...

Page 925 - To connect FUG and a NEAX2000 IVS

NEAX2400 IPX Feature Programming Manual Page 882 NDA-24297, Issue 1 C-167 Centralized Maintenance - CCIS FCCS Programming (cont’d) • To connect FUG and a NEAX2000 IVS 2 (refer to the manuals for the NEAX2000 IVS 2 for data programming on the NEAX2000 IVS 2 side): • To connect a NEAX2400 IPX and a NE...

Page 926 - Data Communication - CCIS; When transmitting data from Data Adapter; Press the DATA key on D; Data communication ends.; DATA XXXX; READY D YYY XX

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 883 Data Communication - CCIS D-41 D-41 Data Communication - CCIS General Description This service allows Inter-Office data communication service where the Digital Interface (DTI) is used as the CCISLine over a T1 channel (Digital Link C...

Page 927 - When cancelling the data connection; AMND

NEAX2400 IPX Feature Programming Manual Page 884 NDA-24297, Issue 1 D-41 Data Communication - CCIS Operating Procedure (cont’d) When cancelling the data connection 1. Press the DATA key on D term (a); the LCD of D term (a) restores the display of Time and Date. Note: If the opposite DTE is released,...

Page 928 - Data Interface - Automatic Answer - CCIS

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 885 Data Interface - Automatic Answer - CCIS D-65 D-65 Data Interface - Automatic Answer - CCIS General Description This feature allows a data terminal to automatically answer an incoming CCIS call without manual operation,therefore, pro...

Page 930 - Data Line Security - CCIS; This feature is usually programmed on a per-station basis.; - Assign data “0” to SFI-4 and SFI 11 to SFC programmed to the stations.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 887 Data Line Security - CCIS D-66 D-66 Data Line Security - CCIS General Description This feature allows line circuits used for data transmission to be protected from interruptions, such as,ATTENDANT CAMP-ON WITH TONE INDICATION - CCIS ...

Page 931 - Data Line Privacy - CCIS; - Leave data “0” to SFI 4 and SFI 11 to the SFC assigned to the stations.

NEAX2400 IPX Feature Programming Manual Page 888 NDA-24297, Issue 1 D-67 Data Line Privacy - CCIS D-67 Data Line Privacy - CCIS General Description This feature automatically prevents interruptions from features such as ATTENDANT CAMP-ON WITH TONEINDICATION - CCIS [A-45], BUSY VERIFICATION - CCIS [B...

Page 932 - Data Privacy on Demand - CCIS; To activate DATA PRIVACY ON DEMAND from a single-line telephone; Dial the desired station number.; To cancel DATA PRIVACY ON DEMAND from a single-line telephone; While connected, switch hook flash receive Special Dial Tone.; BUSY VERIFICATION-CCIS

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 889 Data Privacy on Demand - CCIS D-68 D-68 Data Privacy on Demand - CCIS General Description This feature allows a station user to prevent interruptions by features such as ATTENDANT CAMP-ON - CCIS [A-45], BUSY VERIFICATION - CCIS [B-9]...

Page 934 - Data Transparency - CCIS; An asynchronous transparency path up to 9600 bps is provided.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 891 Data Transparency - CCIS D-69 D-69 Data Transparency - CCIS General Description This feature provides a DATA TRANSPARENCY path between nodes within the CCIS network for datatransmission using a Data Module or D term / Data Adapter. O...

Page 935 - Deluxe Traveling Class Mark - CCIS

NEAX2400 IPX Feature Programming Manual Page 892 NDA-24297, Issue 1 D-70 Deluxe Traveling Class Mark - CCIS D-70 Deluxe Traveling Class Mark - CCIS General Description This feature provides call connection restrictions within the CCIS network. The following three types of restrictionsare allowed: • ...

Page 936 - Dial Access to Attendant - CCIS; To access an Attendant Console; Dial the Operator Call Code receive ringback tone.; Stations will terminate to the Attendant Console.; Main Node; - Assign a specific number to the Attendant Console.; Satellite Node

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 893 Dial Access to Attendant - CCIS D-71 D-71 Dial Access to Attendant - CCIS General Description This feature allows a user to access an Attendant Console through the CCIS network by dialing an Operator CallCode. Operating Procedure To ...

Page 941 - Route And Trunk Number; Central Office Code; ACOC; - Each trunk must be assigned a Central Office Code.

NEAX2400 IPX Feature Programming Manual Page 898 NDA-24297, Issue 1 D-73 Digital Display - Trunk - CCIS Service Conditions (cont’d) Example 2: Trunk Interactions 1. For display purposes only, Route and Trunk numbers and Central Office Codes may be usedsimultaneously in the same system and are applie...

Page 942 - A DIT call terminates to Node A.; If the called party is busy, the following conditions apply:

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 899 Direct-In Termination - CCIS D-74 D-74 Direct-In Termination - CCIS General Description This service feature allows Inter-Office Direct-In Termination for a case where an incoming call addressed to astation in a PBX from a C.O. line ...

Page 944 - Distinctive Ringing - CCIS; Station (c) and the Attendant in Node A are engaging in a call.; Ring for Incoming Internal Calls on CCIS network:

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 901 Distinctive Ringing - CCIS D-75 D-75 Distinctive Ringing - CCIS General Description This service feature allows Inter-Office Distinctive Ringing for a call terminated from a different PBX in the CCISnetwork. Operating Procedure 1. St...

Page 945 - Distinctive ringing only for DIT and DID calls.

NEAX2400 IPX Feature Programming Manual Page 902 NDA-24297, Issue 1 D-75 Distinctive Ringing - CCIS Programming STEP 1: ASYD - System 1, Index 72, Bit 6. Distinctive ringing only for DIT and DID calls. System 3, Index 0: Assign the timer value of the ringer used at the time of local line incoming. (...

Page 946 - DND SET

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 903 Do Not Disturb - D term - CCIS D-76D D-76D Do Not Disturb - D term - CCIS General Description This feature allows a D term user to temporarily establish a DO NOT DISTURB status, during which time incoming CCIS calls will be denied ac...

Page 953 - To place a call

NEAX2400 IPX Feature Programming Manual Page 910 NDA-24297, Issue 1 D-93D Dual Hold D term - CCIS D-93D Dual Hold D term - CCIS General Description This feature allows two connected D term s to simultaneously be placed on non-exclusive hold over a CCIS link. This enables the held parties to answer o...

Page 954 - Station C dials the number for Station B and receives busy tone.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 911 Executive Right-of-Way - CCIS E-8 E-8 Executive Right-of-Way - CCIS General Description This service feature allows Inter-Office Executive Right-of-Way when the bridging-in station and the bridgedstation respectively, belong to a dif...

Page 956 - - Assigns Override key on a D

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 913 Executive Right-of-Way - CCIS E-8 Programming (cont’d) STEP 4: ASFC - Assigns Executive Right-of-Way Calling (SFI = 3) to the SFC of the station setting Executive Right-of-Way. Also assigns Executive Right-of-Way-Called (SFI = 4) and...

Page 957 - Elapsed Time Display - CCIS; is connected to any trunk through the CCIS; When the D

NEAX2400 IPX Feature Programming Manual Page 914 NDA-24297, Issue 1 E-9 Elapsed Time Display - CCIS E-9 Elapsed Time Display - CCIS General Description This feature provides an LCD display of the time elapsed while a D term is connected to any trunk through the CCIS network. Operating Procedure No m...

Page 958 - E911 - ANI Unified Number of Digits - CCIS

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 915 E911 - ANI Unified Number of Digits - CCIS E-20 E-20 E911 - ANI Unified Number of Digits - CCIS General Description This feature allows a station or Attendant Console, called via CCIS, to perform E911-ANI service. This feature isfunc...

Page 961 - Flexible Numbering of Stations - CCIS; Only three and four-digit station numbers will appear.

NEAX2400 IPX Feature Programming Manual Page 918 NDA-24297, Issue 1 F-12 Flexible Numbering of Stations - CCIS F-12 Flexible Numbering of Stations - CCIS General Description This feature allows voice and data station numbers to be assigned to any instrument in the CCIS network, basedsolely on number...

Page 963 - To call the Attendant

NEAX2400 IPX Feature Programming Manual Page 920 NDA-24297, Issue 1 H-11 House Phone - CCIS H-11 House Phone - CCIS General Description This feature allows selected stations to call an Attendant Console through the CCIS network, simply by going off-hook. Operating Procedure To call the Attendant 1. ...

Page 964 - A HOTLINE - CCIS station can be assigned as a line/feature key on a D; APPEARANCE

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 921 Hotline - CCIS H-12 H-12 Hotline - CCIS General Description This feature allows two stations at different nodes in the CCIS network to be associated with one another on anautomatic ringdown basis. Operating Procedure 1. Station A lif...

Page 965 - HOTLINE Tenant

NEAX2400 IPX Feature Programming Manual Page 922 NDA-24297, Issue 1 H-12 Hotline - CCIS Programming STEP 1: ASDT - Assign the station as a TEC = 14 for Hotline. STEP 2: AHLS - Assign the station number programmed above for the following parameters: HOT TN: HOTLINE Tenant STN: HOTLINE Station TYP: 2 ...

Page 966 - Incoming Call Identification - CCIS

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 923 Incoming Call Identification - CCIS I-16 I-16 Incoming Call Identification - CCIS General Description This feature allows an Attendant to visually identify the type of service and/or trunk route which is arriving orwaiting to be answ...

Page 968 - Individual Attendant Access - CCIS; The user dials an individual Attendant Identification Number.; The Attendant Consoles must first be programmed.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 925 Individual Attendant Access - CCIS I-17 I-17 Individual Attendant Access - CCIS General Description This feature permits a user to call a particular Attendant Console in the CCIS network, via an individual AttendantIdentification Num...

Page 969 - To transfer from Console A to Console B

NEAX2400 IPX Feature Programming Manual Page 926 NDA-24297, Issue 1 I-18 Inter-Position Transfer - CCIS I-18 Inter-Position Transfer - CCIS General Description This feature allows calls to be transferred from one Attendant Console to another through the CCIS network. Operating Procedure To transfer ...

Page 970 - Look Ahead Routing - CCIS; Dial the access code receive second dial tone.; The maximum number of adjacent CCIS links for each system is 32.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 927 Look Ahead Routing - CCIS L-25 L-25 Look Ahead Routing - CCIS General Description This feature allows a station to dial a Public Switched Telephone Network (PSTN) call and has the capability oflooking ahead to seven directly-connecte...

Page 972 - LDN Night Connection - CCIS

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 929 LDN Night Connection - CCIS L-29 L-29 LDN Night Connection - CCIS General Description When an LDN incoming call arrives from a CCIS line or other outside line while the System is in Night Mode, thisservice feature transfers the call ...

Page 974 - When transfer destination is outside line (less than 8 digits)

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 931 LDN Night Connection - CCIS L-29 Service Conditions (cont’d) 7. If the system changes to Night Mode during a call termination to the Attendant Console, an LDN incomingcall will be connected to the transfer destination associated with...

Page 975 - Message Reminder - CCIS; From D; A and B are engaging in a call.; C goes off-hook and dials the number for D; On D; MESSAGE SET XXXX

NEAX2400 IPX Feature Programming Manual Page 932 NDA-24297, Issue 1 M-34 Message Reminder - CCIS M-34 Message Reminder - CCIS General Description This service feature allows Inter-Office Message Reminder when the calling station and the called station belong todifferent PBXs in the CCIS network. Ope...

Page 976 - While the message lamp illuminates, D; From a single-line Station to a D; s A and B are engaging in a call.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 933 Message Reminder - CCIS M-34 Operating Procedure (cont’d) 5. D term B hangs up. 6. While the message lamp illuminates, D term B goes off-hook or presses the SPEAKER key and receives dial tone. 7. D term B presses the MSG key and rece...

Page 977 - Station C goes off-hook and dials the number for D; Station C switch hook flashes receives special dial tone.; B illuminates, indicating that the message has been set.; B goes off-hook or presses the SPEAKER key and receives

NEAX2400 IPX Feature Programming Manual Page 934 NDA-24297, Issue 1 M-34 Message Reminder - CCIS Operating Procedure (cont’d) 2. Station C goes off-hook and dials the number for D term B; receives busy tone. 3. Station C switch hook flashes; receives special dial tone. 4. Station C dials the MESSAGE...

Page 978 - Setting by MSG key (D

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 935 Message Reminder - CCIS M-34 Operating Procedure (cont’d) 7. D term B presses the MSG key and receives ringback tone. Redial is automatically made to Station C and Station C rings. Service Conditions 1. A message can be sent out only...

Page 979 - Message Reminder service.; - Assign the Access Code of the Message Reminder service.

NEAX2400 IPX Feature Programming Manual Page 936 NDA-24297, Issue 1 M-34 Message Reminder - CCIS Programming (cont’d) STEP 2: ANPD - Assign minimum necessary number of digits for the first number of the Access Code of Message Reminder service. STEP 3: ASPA - Assign the Access Code of the Message Rem...

Page 980 - MESSAGE SET XXXX; MESSAGE XXXX

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 937 Message Reminder - D term - CCIS M-34D M-34D Message Reminder - D term - CCIS General Description This feature allows a D term to leave a MESSAGE REMINDER at a D term in a different node in the CCIS network. Operating Procedure To ac...

Page 981 - For Single Line Sets

NEAX2400 IPX Feature Programming Manual Page 938 NDA-24297, Issue 1 M-34D Message Reminder - D term - CCIS Service Conditions 1. This feature is only available between two D term sets that both have the MESSAGE feature key. If a message is directed to a single line or a D term that does not have the...

Page 983 - Message Waiting Lamp Setting - Attendant - CCIS; To set MW Indication

NEAX2400 IPX Feature Programming Manual Page 940 NDA-24297, Issue 1 M-35 Message Waiting Lamp Setting - Attendant - CCIS M-35 Message Waiting Lamp Setting - Attendant - CCIS General Description This service feature allows the MESSAGE WAITING (MW) lamp on the D term or telephone set, equipped with MW...

Page 984 - connection index for MW service.; - Assign the access code and connection index for MW service.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 941 Message Waiting Lamp Setting - Attendant - CCIS M-35 Programming STEP 1: ANPD - Assign minimum necessary number of digits for the first number of the access code and connection index for MW service. STEP 2: ASPA - Assign the access c...

Page 985 - Message Waiting Lamp Setting - Station - CCIS; To set from a single line telephone; To cancel from a D

NEAX2400 IPX Feature Programming Manual Page 942 NDA-24297, Issue 1 M-36 Message Waiting Lamp Setting - Station - CCIS M-36 Message Waiting Lamp Setting - Station - CCIS General Description This feature allows any D term or single line telephone to set/cancel a MESSAGE WAITING indication or lamp at ...

Page 986 - display will indicate:

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 943 Message Waiting Lamp Setting - Station - CCIS M-36 Service Conditions (cont’d) 6. If a user attempts to set MESSAGE WAITING to a station where MESSAGE WAITING has already beenset, busy tone will be sent to the station, and the D term...

Page 987 - Miscellaneous Trunk Access - CCIS

NEAX2400 IPX Feature Programming Manual Page 944 NDA-24297, Issue 1 M-37 Miscellaneous Trunk Access - CCIS M-37 Miscellaneous Trunk Access - CCIS General Description This feature provides access through the CCIS network to all types of external and customer provided equipment/facilities, such as TIE...

Page 988 - Miscellaneous Trunk Restriction - CCIS; If other services such as STATION MESSAGE DETAIL RECORDING

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 945 Miscellaneous Trunk Restriction - CCIS M-38 M-38 Miscellaneous Trunk Restriction - CCIS General Description This feature allows certain stations and dial-repeating TIE Line trunks to be denied access through CCIS to certaintrunk rout...

Page 989 - Outgoing Modem Pooling

NEAX2400 IPX Feature Programming Manual Page 946 NDA-24297, Issue 1 M-39 Modem Pooling - CCIS M-39 Modem Pooling - CCIS General Description This feature allows any terminal to have access to a data terminal in a different office through a concentration ofmodem groups, set at different data speeds, u...

Page 990 - AMDD; - Assign data to characterize the different Modem Route Numbers.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 947 Modem Pooling - CCIS M-39 Service Conditions (cont’d) 8. Distinctive Ringing - Most modems recognize only a 2-second on, 1-second off ring. This considerationmust be taken into account when defining incoming trunk ringing. 9. The Rev...

Page 991 - - Assign the Make Idle status to the MODEM POOLING Trunks.

NEAX2400 IPX Feature Programming Manual Page 948 NDA-24297, Issue 1 M-39 Modem Pooling - CCIS Programming (cont’d) 1 - 4 WireSPEED: 0 ASYNC: 0 FCY: 0 STEP 2: ATRK - To program the PA-M20 MODEM POOLING Trunk Circuit Card, assign the LEN Number, MODEM POOLING Route Number (919 - 926), Trunk Number, an...

Page 992 - Multiple Call Forwarding - All Calls - CCIS

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 949 Multiple Call Forwarding - All Calls - CCIS M-40 M-40 Multiple Call Forwarding - All Calls - CCIS General Description This service feature permits all calls destined for a particular station in a CCIS network to be routed to another ...

Page 997 - times

NEAX2400 IPX Feature Programming Manual Page 954 NDA-24297, Issue 1 M-40 Multiple Call Forwarding - All Calls - CCIS Service Conditions (cont’d) 13. The following services are activated within one node, therefore, the number of times for these services areindependent. The maximum number of times for...

Page 999 - to Office E through FCCS link:

NEAX2400 IPX Feature Programming Manual Page 956 NDA-24297, Issue 1 M-40 Multiple Call Forwarding - All Calls - CCIS Service Conditions (cont’d) d.) The Call Forwarding service is activated four times, because the call is forwarded from Office D to Office E through FCCS link: Note: Call Forwarding s...

Page 1003 - Multiple Call Forwarding - Busy Line - CCIS

NEAX2400 IPX Feature Programming Manual Page 960 NDA-24297, Issue 1 M-41 Multiple Call Forwarding - Busy Line - CCIS M-41 Multiple Call Forwarding - Busy Line - CCIS General Description This service feature permits a call to a busy station to be forwarded in a CCIS network, multiple times, to aprede...

Page 1011 - Jumps

NEAX2400 IPX Feature Programming Manual Page 968 NDA-24297, Issue 1 M-41 Multiple Call Forwarding - Busy Line - CCIS Interactions (cont’d) 3. In the case of Call Back - CCIS [C-44], service is effective to Station B in Office B. The service is invalidto station D. 4. In the case of Step Call - CCIS ...

Page 1013 - Multiple Call Forwarding - Don’t Answer - CCIS; Station D lifts the handset and is connected to the calling party.

NEAX2400 IPX Feature Programming Manual Page 970 NDA-24297, Issue 1 M-42 Multiple Call Forwarding - Don’t Answer - CCIS M-42 Multiple Call Forwarding - Don’t Answer - CCIS General Description This service permits a call to an unanswered station to be forwarded, multiple times, to a predesignated sta...

Page 1016 - When the destination is the calling party:

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 973 Multiple Call Forwarding - Don’t Answer - CCIS M-42 Service Conditions (cont’d) 10. When the destination is the calling party: a.) CALL FORWARDING - DON’T ANSWER: the call continues to place at the station that forwards the call to t...

Page 1018 - Any kind of D

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 975 Multiple Call Forwarding - Don’t Answer - CCIS M-42 Service Conditions (cont’d) 15. The following are detailed examples of Call Forwarding - CCIS activation. These examples are activatedunder the conditions below: • The maximum numbe...

Page 1023 - Don’t Answer service.

NEAX2400 IPX Feature Programming Manual Page 980 NDA-24297, Issue 1 M-42 Multiple Call Forwarding - Don’t Answer - CCIS Programming (cont’d) STEP 2: ASFC - Allow Call Forwarding-Don’t Answer (SFI = 8) to the SFC of the stations. STEP 3: ANPD - Assign minimum necessary number of digits for the first ...

Page 1024 - Multiple Console Operation - CCIS

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 981 Multiple Console Operation - CCIS M-43 M-43 Multiple Console Operation - CCIS General Description This feature provides console operation where ATTENDANT CONSOLEs [A-3] are installed in more than onenode in the CCIS network. Operatin...

Page 1025 - INDIVIDUAL ATTENDANT ACCESS

NEAX2400 IPX Feature Programming Manual Page 982 NDA-24297, Issue 1 M-43 Multiple Console Operation - CCIS Interactions (cont’d) 4. ATTENDANT CONSOLEs [A-3] may not dial another console directly. Talk path will occur only duringINTERPOSITION TRANSFER [I-5]. 5. When more than one ATTENDANT CONSOLE [A...

Page 1026 - Message Center Interface - CCIS; this feature is called Centralized Message Center Interface.; Control of MWLs is based on data from the external CPU.; Dual call forwarding service is possible.; Procedures

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 983 Message Center Interface - CCIS M-67 M-67 Message Center Interface - CCIS General Description This service feature provides an INTERFACE to the external CPU for MESSAGE CENTER information when aspecific UCD group or console in a CCIS...

Page 1030 - - Assigns the Remote Point Code data for the Message Center.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 987 Message Center Interface - CCIS M-67 Programming (cont’d) System 1, Index 78, Bit 1: (1) Calling and Intermediate Station number indication. Bit 1: (1) Kind ofservice class indication.System 1, Index 116 (Port 0) through Index 123 (P...

Page 1033 - The calling party hears ringback tone.; See CALL FORWARDING-ALL CALLS

NEAX2400 IPX Feature Programming Manual Page 990 NDA-24297, Issue 1 N-16 Night Connection - Flexible - CCIS N-16 Night Connection - Flexible - CCIS General Description This feature provides inter-office flexible Night Connection service through the CCIS network, when the NIGHTCONNECTION-FIXED - CCIS...

Page 1036 - - Assign route class data for CCIS trunk route.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 993 Name Display - System - CCIS N-37 Programming (cont’d) STEP 2: ARTD - Assign route class data for CCIS trunk route. RT:43-BT :1 50-DPLY :1 98-CI :0 112-IND :1

Page 1037 - Number Portability - CCIS; are managed by

NEAX2400 IPX Feature Programming Manual Page 994 NDA-24297, Issue 1 N-46 Number Portability - CCIS N-46 Number Portability - CCIS General Description This feature allows telephone number data in an FCCS group (a network where multiple NEAX2400 IPXs areconnected via FCCS link) to be carried to anothe...

Page 1038 - Destination node; AEADN; PATTERN (TELEPHONE NUMBER IS MOVED FROM A TO B)

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 995 Number Portability - CCIS N-46 Service Conditions (cont’d) Legend: * Destination node ** Node to be connected to the FCCS group where the new number is added *** Node where the telephone number is located before the Number Portabilit...

Page 1039 - Enter the FUG number the designated station belongs to

NEAX2400 IPX Feature Programming Manual Page 996 NDA-24297, Issue 1 N-46 Number Portability - CCIS FCCS Programming (cont’d) SYSTEM: Checkbox either of the checkboxes, depending on system type (NEAX2400 IPX 1/4/16IMG system or NEAX2000 IVS 2 system) TYPE: Checkbox either of the checkboxes, allocatio...

Page 1040 - Dial the trunk access code and the desired number.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 997 Off-Hook Queuing - CCIS O-11 O-11 Off-Hook Queuing - CCIS General Description This feature allows a user in a CCIS network to remain off-hook and automatically enter a first-in, first-out queueat the calling and distant nodes when an...

Page 1041 - CALL WAITING-ORIGINATING

NEAX2400 IPX Feature Programming Manual Page 998 NDA-24297, Issue 1 O-11 Off-Hook Queuing - CCIS Interactions (cont’d) 6. The following features cannot be activated toward the busy station: CALL WAITING-ORIGINATING [C-31] CALL WAITING-TERMINATING [C-12] ATTENDANT CAMP-ON WITH TONE INDICATION [A-1, 4...

Page 1042 - Outgoing Trunk Queuing - CCIS

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 999 Outgoing Trunk Queuing - CCIS O-12 O-12 Outgoing Trunk Queuing - CCIS General Description This service feature allows Inter-Office, On-Hook OUTGOING TRUNK QUEUING (OGQ) when an outgoingC.O. line call from a station in a PBX to anothe...

Page 1043 - Station (b) switch hook flashes and receives the special dial tone.

NEAX2400 IPX Feature Programming Manual Page 1000 NDA-24297, Issue 1 O-12 Outgoing Trunk Queuing - CCIS Operating Procedure (cont’d) 3. Station (b) dials Station (c) in the Center Office and receives a busy tone. 4. Station (b) switch hook flashes and receives the special dial tone. STN (c) CO Line ...

Page 1044 - Station (b) dials the OGQ Access Code and receives a service set tone.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 1001 Outgoing Trunk Queuing - CCIS O-12 Operating Procedure (cont’d) 5. Station (b) dials the OGQ Access Code and receives a service set tone. 6. Station (b) hangs up. Outgoing Trunks become available for processing the call from Station...

Page 1046 - - Assign the OGQ service for each route except the CCIS route.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 1003 Outgoing Trunk Queuing - CCIS O-12 Programming (cont’d) System 2, Index 4, Bit 0: Call Back and OG Trunk Queuing access code. 0/1 = Separate/Common.Bit 1: Automatic setting of OG Trunk Queuing by On-Hook. 0/1 = Not Required/Required...

Page 1047 - To access Paging through CCIS

NEAX2400 IPX Feature Programming Manual Page 1004 NDA-24297, Issue 1 P-28 Paging Access - CCIS P-28 Paging Access - CCIS General Description This feature provides dial access to paging equipment from an ATTENDANT CONSOLE [A-3] or station throughthe CCIS network. Operating Procedure To access Paging ...

Page 1048 - BUSY is displayed on the 16-button D; LCD display when the paging trunk is busy. Reorder tone is

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 1005 Paging Access - CCIS P-28 Interactions (cont’d) 10. BUSY is displayed on the 16-button D term LCD display when the paging trunk is busy. Reorder tone is returned. 11. If Priority Page is to be used with PAGE ACCESS; in ARTD, CDN 6:T...

Page 1049 - Restriction from Outgoing Calls - CCIS

NEAX2400 IPX Feature Programming Manual Page 1006 NDA-24297, Issue 1 R-22 Restriction from Outgoing Calls - CCIS R-22 Restriction from Outgoing Calls - CCIS General Description This feature automatically restricts preselected stations from placing certain outgoing calls through CCIS withoutAttendant...

Page 1050 - 3: Data terminal via D

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 1007 Restriction from Outgoing Calls - CCIS R-22 Interactions (cont’d) 4. THREE-WAY CALLING [T-2]: Station A cannot include restricted Station B in a THREE-WAYCALLING connection with Route 1. 5. DAY/NIGHT CLASS OF SERVICE [D-15]: Restric...

Page 1054 - This feature is not applicable for tandem connections.; The Serial Call key is the button right of the DEST key.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 1011 Serial Call - CCIS S-52 Service Conditions (cont’d) 4. A called station that has the SERIAL CALL feature activated will automatically recall the attendant if thestation switch hook flashes. 5. This feature is not applicable for tand...

Page 1055 - for a darker image or the DOWN key for a lighter image.

NEAX2400 IPX Feature Programming Manual Page 1012 NDA-24297, Issue 1 S-53D Service Display - D term - CCIS S-53D Service Display - D term - CCIS General Description This feature allows a D term user to receive LCD displays corresponding to the various features as they are initiated. Operating Proced...

Page 1056 - To place a data call to a terminal already connected by a voice call

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 1013 Simultaneous Voice and Data Transmission - CCIS S-54 S-54 Simultaneous Voice and Data Transmission - CCIS General Description This feature allows a voice signal and a digital data signal of up to 56 Kbps to be transmitted simultaneo...

Page 1057 - Simultaneous Voice and Data Transmission - CCIS; VOICE DATA

NEAX2400 IPX Feature Programming Manual Page 1014 NDA-24297, Issue 1 S-54 Simultaneous Voice and Data Transmission - CCIS Service Conditions (cont’d) 4. If the D term DTX button is pressed when connected station-to-station within the CCIS network, the voice line connection is switched to MODEM POOLI...

Page 1059 - This feature allows single-digit station numbers to be assigned.; The called station will ring.; The single-digit number must not duplicate the first digit of:; - Assign the station number to a specific station within the system.

NEAX2400 IPX Feature Programming Manual Page 1016 NDA-24297, Issue 1 S-55 Single-Digit Station Calling - CCIS S-55 Single-Digit Station Calling - CCIS General Description This feature allows single-digit station numbers to be assigned. Operating Procedure 1. Lift the handset; receive dial tone, 2. D...

Page 1060 - To establish a conference call; The conferees are automatically connected.; To release from a conference call

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 1017 Station-Controlled Conference - CCIS S-56 S-56 Station-Controlled Conference - CCIS General Description This feature allows any PBX station to establish a conference through CCIS. The conference can be any combinationof stations and...

Page 1062 - The maximum number of digits per telephone number is eight.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 1019 Station-to-Station Calling - CCIS S-57 S-57 Station-to-Station Calling - CCIS General Description This feature allows any user to dial another station directly, through CCIS, without operator assistance. Operating Procedure 1. Lift ...

Page 1063 - To place a station-to-station call through the Attendant Console; Give the desired telephone number to the Attendant.

NEAX2400 IPX Feature Programming Manual Page 1020 NDA-24297, Issue 1 S-58 Station-to-Station Calling - Operator Assistance - CCIS S-58 Station-to-Station Calling - Operator Assistance - CCIS General Description This feature allows a user to call another station, through CCIS, with the assistance of ...

Page 1066 - Synchronous Data Switching - CCIS; To originate a synchronous data call from a D; equipped with a Data Adapter; Data; READY D

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 1023 Synchronous Data Switching - CCIS S-60 S-60 Synchronous Data Switching - CCIS General Description This feature allows a synchronous data terminal connected to a D term /Data Adapter to call a synchronous data terminal connected to a...

Page 1067 - IV, V Asynchronous Data Adapter - Installation and; Switched Connection Via The 24 DIT:

NEAX2400 IPX Feature Programming Manual Page 1024 NDA-24297, Issue 1 S-60 Synchronous Data Switching - CCIS Interactions (cont’d) 4. For greater detail, refer to ETI: 010, D term IV, V Asynchronous Data Adapter - Installation and Programming. 5. Switched Synchronous Communication Using The DT-003 Da...

Page 1069 - FKY: Feature Key Number

NEAX2400 IPX Feature Programming Manual Page 1026 NDA-24297, Issue 1 S-60 Synchronous Data Switching - CCIS Programming (cont’d) RING: Type of Ringing (0-3 KYN: Key Number (1-40) KYI: Service Index0: Key Not Used 1: Feature Key2: Multi-line Key KD: Assign as 0. FKY: Feature Key Number The feature ke...

Page 1070 - PARAMETER

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 1027 Synchronous Data Switching - CCIS S-60 Programming (cont’d) The following parameters will be displayed. Assign attribute data according to the following table: NO. PARAMETER DISPLAY DATA DESCRIPTION 00 DTR ER Check 00 DTR Check Nece...

Page 1071 - For Data Module

NEAX2400 IPX Feature Programming Manual Page 1028 NDA-24297, Issue 1 S-60 Synchronous Data Switching - CCIS Programming (cont’d) For Data Module STEP 1: ASDT - Assign levels 1, 2, & 3 of a PA-4DTL as TEC = 16. Also assign an RSC and SFC. STEP 2: ASFC - For TEC = 16 stations, assign an SFC that, ...

Page 1072 - Supervisory Call - CCIS; CALL HOLD

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 1029 Supervisory Call - CCIS S-73 S-73 Supervisory Call - CCIS General Description This feature allows an Attendant, in a CCIS network, to set Supervisory Call status before releasing a Central Officecall to a station. When the call is e...

Page 1074 - A Restriction table is assigned to each trunk group.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 1031 Toll Restriction - 3/6-Digit - CCIS T-26 T-26 Toll Restriction - 3/6-Digit - CCIS General Description This feature allows the NEAX2400 IPX to restrict outgoing calls through CCIS according to specific Area and/orCentral Office codes...

Page 1076 - AARP; Examples Of Toll Restriction

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 1033 Toll Restriction - 3/6-Digit - CCIS T-26 Programming (cont’d) OGRT: Outgoing Route NumberDC: Destination (Area) Code (Maximum 11 digits) TDI: Restriction Data*0: Connection is Restricted 1: Connection is Allowed2: 3/6-Digit Toll Res...

Page 1077 - Repeat these same assignments for the following Digit Codes

NEAX2400 IPX Feature Programming Manual Page 1034 NDA-24297, Issue 1 T-26 Toll Restriction - 3/6-Digit - CCIS Programming (cont’d) Notice that assignments for digit codes 90 and 91 which cover operator calls and all 1 + Area Codescalls are not assigned. Digit Codes (DC) which are not assigned are au...

Page 1079 - * This assignment restricts the Area Codes listed.

NEAX2400 IPX Feature Programming Manual Page 1036 NDA-24297, Issue 1 T-26 Toll Restriction - 3/6-Digit - CCIS Programming (cont’d) DC: 912 TDI: 2 (Go to AARP Command) NND: 3 DC: 913 TDI: 2 (Go to AARP Command)NND:3 DC: 914 TDI: 2 (Go to AARP Command)NND:3 \\\\ (Through) \\\\DC: 919 TDI: 2 (Go to AAR...

Page 1082 - Trunk Answer from Any Station - CCIS

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 1039 Trunk Answer from Any Station - CCIS T-27 T-27 Trunk Answer from Any Station - CCIS General Description This feature allows any station not restricted from incoming calls to answer incoming calls when the network is inNight mode. Wh...

Page 1084 - Uniform Numbering Plan - CCIS

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 1041 Uniform Numbering Plan - CCIS U-5 U-5 Uniform Numbering Plan - CCIS General Description In a CCIS network, a Uniform Numbering Plan enables a user to call any other station in the network using aUniform Numbering system. Two alterna...

Page 1085 - The CCIS TIE Line signal link route(s) should be assigned as follows:; Numbering Plan

NEAX2400 IPX Feature Programming Manual Page 1042 NDA-24297, Issue 1 U-5 Uniform Numbering Plan - CCIS Interactions If seven-digit Uniform Numbering Plans are used, an access code to the CCIS network may be added. Thus, a totalof eight digits will be dialed. For example, a user in Illinois wishes to...

Page 1086 - office. This information is transmitted to the D; display at the other offices of the network.

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 1043 Uniform Numbering Plan - CCIS U-5 Programming (cont’d) STEP 9: AOPR - The AFRS command designates the dialing sequence and the OPR to be selected. The AOPR defines the routes and in what order these routes will be selected. In this ...

Page 1087 - belong to different PBX’s in the CCIS network.; From a D; LCD on D; From a single-line station to a D; (b) through a CCIS line and receives ringback tone while D; called; VOICE XXXX

NEAX2400 IPX Feature Programming Manual Page 1044 NDA-24297, Issue 1 V-7 Voice Call - CCIS V-7 Voice Call - CCIS General Description This service feature allows Inter-office VOICE CALL when the calling D term /Single-line Station and the called D term belong to different PBX’s in the CCIS network. O...

Page 1088 - Station (a) switch hook flashes and receives special dial tone. D; Setting by VOICE button

NEAX2400 IPX Feature Programming ManualNDA-24297, Issue 1 Page 1045 Voice Call - CCIS V-7 Operating Procedure (cont’d) 2. Station (a) switch hook flashes and receives special dial tone. D term (b) still does not answer. 3. Station (a) dial the Access Code of VOICE CALL service and sends out a signal...