Miele KM6366 - Manuals

Warning and Safety instructions 6 Safety with children  Young children must not be allowed to use this appliance.  Older children may only use the appliance when its operation has been clearly explained to them and they are able to use it safely,recognising the dangers of misuse.  Cleaning may on...

Warning and Safety instructions 7 Technical safety  Repairs and other work by unqualified persons could be dangerous. Installation, maintenance work and repairs to electricalappliances must only be carried out by a Miele approved servicetechnician.  A damaged appliance is dangerous. Check it for a...

Warning and Safety instructions 9  If the cooktop is installed behind a furniture panel (e.g. a door), ensure that the door is never closed whilst the cooktop is in use.Heat and moisture can build up behind a closed furniture panel andcause subsequent damage to the cooktop, the housing unit and the...

Warning and Safety instructions 10 Correct use  The cooktop gets hot when in use and remains hot for a while after being switched off. There is a danger of burning until theresidual heat indicators go out.  Due to the high temperatures radiated, objects left near the cooktop when it is in use coul...

Warning and Safety instructions 11  When the appliance is switched on either deliberately or by mistake, or when there is residual heat present, there is the risk ofany metal items left on the cooktop heating up, with the danger ofburning. Depending on the material, other items left on the cooktopc...

Warning and Safety instructions 13  Do not use two pans on a cooking zone, extended zone or PowerFlex zone at the same time.  If the pan only partially covers the cooking zone, the handle could become very hot.Ensure that you always place the pan in the middle of the cookingzone.

Warning and Safety instructions 14 Cleaning and care  Do not use a steam cleaning appliance to clean this appliance. The steam could reach the electrical components and cause a shortcircuit.  If the cooktop is built in over a pyrolytic oven, the cooktop should not be used whilst the pyrolytic proc...

Caring for the environment 15 Disposal of the packingmaterial The transport and protective packaginghas been selected from materials whichare environmentally friendly fordisposal, and can normally be recycled. Recycling the packaging reduces theuse of raw materials in themanufacturing process and al...

Overview 16 Cooktop a PowerFlex cooking zone with TwinBooster b PowerFlex cooking zone with TwinBooster ab can be combined to form PowerFlex cooking area c PowerFlex cooking zone with TwinBooster cf can be combined to form PowerFlex cooking area d PowerFlex cooking zone with TwinBooster de can be co...

Overview 17 Controls / Indicators 8 8 0 0 a b c min d e f g h i j k l m Sensor controls a For switching the cooktop on/off b For activating/deactivating Stop & Go ab For activating/deactivating the system lock c TimerSwitching on and off- For switching between timer functions- For selecting a co...

Overview 18 e For switching the keeping warm function on and off f For selecting the power setting g For switching the PowerFlex cooking area on/off Indicator lights h The system lock has been activated k Timer i Cooking zone display  Cooking zone ready for use  Keeping warm setting  to  Power l...

Overview 19 Cooking zone data Cooking zone Ø  in cm* Rating in watts for 230 V**  15–23 NormalTwinBooster, level 1TwinBooster, level 2 210030003650  15–23 NormalTwinBooster, level 1TwinBooster, level 2 210030003650  15–23 NormalTwinBooster, level 1TwinBooster, level 2 210033003650  15–23 NormalT...

Using for the first time 20  Please stick the extra data plate forthe appliance supplied with thisdocumentation in the space providedin the "After sales service, data plate,warranty" section of this booklet.Alternatively, the additional label canbe stuck near the appliance if theappliance m...

Induction 21 The induction principle An induction coil is located under eachcooking zone. When a cooking zone isswitched on, this coil creates amagnetic field which impacts directlyon the base of the pan and heats it up.The cooking zone itself is heated upindirectly by the heat given off by thepan. ...

Induction 22 Noises When using an induction cooking zone,the following noises can occur in thepan, depending on what it is made ofand how it has been constructed. On the higher power settings, it mightbuzz. This will decrease or ceasealtogether when the power setting isreduced. If the pan base is ma...

Induction 23 Pans Suitable pans: – Stainless steel pans with a base that can be magnetised. – Enamelled steel pans. – Cast iron pans. Unsuitable pans: – Stainless steel pans without a magnetic base. – Aluminium and copper pans. – Glass, ceramic or earthenware pots and pans. To test whether a pot or ...

Tips on saving energy 24 – Use a lid whenever possible to minimise heat loss. – Select a smaller pan when cooking small quantities. A smaller pan usesless energy than a larger pan withvery little in it. – Cook with as little water as possible. – Once food has come to the boil or the oil in the pan i...

Power level range 25 Settings Melting butterDissolving gelatine 1–2 Making milk puddings 2 Warming small quantities of liquidCooking riceDefrosting frozen vegetablesCooking pulses 3 Warming liquid and semi-solid foodsMaking omelettes or lightly frying eggsSteaming fruitCooking pasta 4 Steaming veget...

Operation 26 Operating principles The glass ceramic cooktop is equippedwith electronic sensor controls whichreact to finger contact. For safetyreasons, in order to switch the cooktopon, the On/Off   sensor needs to be touched for a little longer than the othersensors. A tone sounds each time a sens...

Operation 27  Fire hazard! Do not leave the cooktop unattendedwhilst it is being used.Please note that the heating up timeon induction cooktops is very muchshorter than on conventionalcooktops. Switching on  Touch the  sensor.  appears in each of the cooking zone indicators. If no further entry ...

Operation 28 PowerFlex cooking area The PowerFlex cooking zones can becombined to form a PowerFlex cookingarea (see "Overview - Cooktop").Settings for the cooking area arecontrolled by the front or left PowerFlexcooking zone. Switching on  Touch the   or   sensor.  will light up in the d...

Operation 29 Auto heat-up When Auto heat-up has been activated,the cooking zone switches onautomatically at the highest setting andthen switches to the continued cookingsetting which you have previouslyselected. The heat-up time depends onwhich continued cooking setting hasbeen chosen (see chart). A...

Operation 30 Booster The cooking zones are equipped with aBooster or TwinBooster (see "Overview– Cooktop"). You can use the Boosterfunction for a maximum of two cookingzones at the same time. When activated, the power is boostedfor a maximum of 15 minutes so thatlarge quantities can be heate...

Operation 31 Switching on the Booster  Touch the 9 sensor twice for thecooking zone you wish.  will appear in the cooking zone display. Switching on the TwinBooster, level 1  Touch the 9 sensor twice for thecooking zone you wish to use.  will appear in the cooking zone display. Switching on the ...

Operation 32 Keeping warm The keeping warm function is notdesigned to reheat food from the coldstate. It is only for keeping food warmdirectly after cooking. If the keeping warm function has beenactivated, the cooking zone will switchoff automatically after a maximum of 2hours. – Only use pans for k...

Timer 33 You can select a time up to amaximum of 99 minutes. The timer can be used for two differentfunctions: – For setting the minute minder. – To set a cooking zone to switch off automatically. Minute minder Setting the minute minder  Touch the  sensor.  Select the time you want with the - or ...

Additional functions 35 Stop & Go When Stop & Go is activated, the powerof all cooking zones in use is reduced topower setting 1.The cooking zone power settings andthe timer settings cannot be altered andthe cooktop can only be switched off. Aset minute minder time will continue tocount down...

Safety features 36 System lock The system lock is deactivated ifthere is an interruption to the powersupply. Your cooktop is equipped with a systemlock to prevent it being switched on bymistake. If an unavailable sensor is touchedwhilst the system lock is activated,  will appear in the timer displ...

Safety features 37 Safety switch-off Safety switch-off with an overlongcooking time The safety switch-off mechanism istriggered automatically if one of thecooking zones is heated for anunusually long period of time. Thisperiod of time depends on the powersetting selected. Once exceeded, thecooking z...

Safety features 38 Overheating protection All the induction coils and coolingelements for the electronics are fittedwith an overheating protectionmechanism. Before the induction coilsor cooling elements get too hot, theoverheating protection mechanism cutsin in one of the following ways: – Any Boost...

Cleaning and care 39  Danger of burning! The cooking zones must be switchedoff. The cooktop needs to cooldown.  Danger of injury! The steam from a steam cleaningappliance could reach electricalcomponents and cause a shortcircuit.Do not use a steam cleaner to cleanthe cooktop. The use of unsuitable...

Cleaning and care 40 Do not clean the area between theglass-ceramic surface and the frameor the frame and the worktop withsharp, pointed objects.This could damage the seals. Do not use washing-up liquid toclean the appliance as washing-upliquid will not remove all soiling anddeposits.It will also fo...

Problem solving guide 41 With the aid of the following guide, minor problems can be easily correctedwithout contacting Miele. If, after reading this guide, you can't remedy the problemyourself, please call Miele (see back cover for details).Please note, however, that a call-out charge will be applie...

Optional accessories 44 Miele offers a range of usefulaccessories, as well as cleaning andconditioning products for yourappliance. These can be ordered online at: or from Miele (see end of this bookletfor contact details). Saucepans and frying pans Miele offer a wide range of pans whichare perfect f...

Con @ ctivity 45 Your cooktop is communicationenabled and via the dongle suppliedwith selected rangehoods cancommunicate with the rangehood(Con @ ctivity). The cooktop sends information on itsoperating status to the rangehood. Theoperation of the rangehood isautomatically controlled by the powersett...

Con @ ctivity 46 Signing on If you want to sign on your cooktop tothe Con @ ctivity system, you will first need to sign on the rangehood.  Disconnect the cooktop from themains electricity supply.  Connect the dongle to the cooktop(see the installation instructions forthe dongle).  Reconnect the c...

Safety instructions for installation 47  The appliance must only be installed and connected to the electricity supply by a suitably qualified and competent person in strict accordance with currentnational and local safety regulations. Fit the wall units and rangehood before fitting the cooktop to a...

Safety distances 48 Safety distance above thecooktop A minimum safety distance must bemaintained between the cooktop andthe rangehood above it. See therangehood manufacturer's operatingand installation instructions for details. If the manufacturer's instructions arenot available for the rangehood, a...

Safety distances 49 Safety distances to the sidesand back of the cooktop Ideally the cooktop should be installedwith plenty of space on either side.There may be a wall at the rear or a tallunit or wall on one side (right or left), taking into account the distancesbelow. On the other side, however, n...

Cooktops with frame or bevelled edge 50 Installation notes Seal between the cooktop and theworktop Do not use sealant between thecooktop and the worktop. This couldresult in damage to the cooktop orthe worktop if the cooktop everneeds to be removed for servicing.The sealing strip under the edge ofth...

Cooktops with frame or bevelled edge 51 Building-in dimensions KM 6366-1 a Front b Building-in depth c Mains connection box d Con @ ctivity connection The mains connection cable (1440 mm long) is supplied separately with thecooktop.

Cooktops with frame or bevelled edge 52 Installation Preparing the worktop  Make the worktop cut-out as shownin "Building-in dimensions". Observethe safety distances (see "Safetydistances").  Seal the cut surfaces on woodenworktops with a suitable sealant toavoid swelling caused by...

Flush-fitted cooktops 53 Installation notes Flush fit cooktops are only suitable forinstallation in natural stone (granite,marble), tiled or solid wood worktops.Certain models are suitable forbuilding into glass worktops - pleasesee advice under "Building-indimensions". When using a worktopm...

Flush-fitted cooktops 55 Installation Granite and marble worktops a Worktop b Cooktop c Gap As the ceramic glass and the worktopcut-out have a certain dimensionaltolerance, the size of gap  can vary (min. 1 mm). d Stepped cut-out Solid wood / tiled / glass worktops a Worktop b Cooktop c Gap d Woode...

Electrical connection 57  Danger of injury! Incorrect installation, maintenance orrepair work is dangerous to users.Miele cannot be held liable fordamage or injury caused by incorrectinstallation, maintenance or repairwork, or by an inadequate or faultyearthing system (e.g. electric shock).All elec...

Electrical connection 58 Replacing the mainsconnection cable  Danger of electrical shock! The mains connection cable mustonly be replaced by a suitablyqualified and competent person inaccordance with current local andnational safety regulations.The earth lead must be connected tothe point marked  ...

After sales service, data plate, warranty 59 After sales service In the event of any faults which you cannot easily remedy, please contact Miele. See back of this booklet for contact details. Please quote the model and serial number of your appliance when contactingMiele. Data plate Space in which t...

www.miele.com.au Miele Experience Centre and Head Office Melbourne: 1 Gilbert Park DriveKnoxfield, VIC 3180 Miele Experience Centre South Melbourne: 206-210 Coventry StreetSouth Melbourne, VIC 3205 Miele Experience Centre and Office Sydney: 3 Skyline PlaceFrenchs Forest, NSW 2086 Miele Experience Ce...

Safety with children ~ Children under 8 years of age must be kept away from the appliance unless they are constantly supervised. ~ Children 8 years and older may only use the appliance unsupervised if they have been shown how to use it in a safe wayand understand the hazards involved. ~ Children mus...

Technical safety ~ Installation, maintenance and repairs may only be carried out by a Miele authorised service technician. Installation, maintenance andrepairs by unqualified persons could be dangerous. ~ A damaged appliance can be dangerous. Check the appliance for visible signs of damage. Do not u...

Correct use ~ Oil and fat can overheat and catch fire. Do not leave the appliance unattended when cooking with oil or fat.If oil or fat does catch fire, do not attempt to put out the flames withwater. Disconnect the appliance from the mains and use a suitablefire blanket, saucepan lid, damp towel or...

~ Metal utensils stored in a drawer under the hob can become hot if the appliance is used intensively for a long time. Do not store anymetal items or utensils in a drawer under the hob ~ This hob is fitted with a cooling fan. If a drawer is fitted directly underneath the hob, ensure that there is su...

Models KM 6328 abcd PowerFlex cooking zones with TwinBooster can be combined to form a PowerFlex cooking area: a + b c + d e Control panel Guide to the appliance 14 e a 8 8 8 8 00 b c d

Sensor controls / displays Guide to the appliance 16 8 8 0 0 a b c min d e f g h i j k l m

Cooking zones Cooking zone KM 6328 Minimum to maximum C in cm* Rating in watts for 230 V** y w x z 15–23 NormalTwinBooster level 1TwinBooster level 2 210030003700 y + w z + x 22–23 / 15 x 23 – 23 x 39 NormalTwinBooster level 1TwinBooster level 2 340048007400 Total: 7400 Cooking zone KM 6366 / KM 636...

Disposal of the packingmaterial The transport and protective packinghas been selected from materialswhich are environmentally friendly fordisposal and should be recycled. Recycling the packaging reduces theuse of raw materials in themanufacturing process and alsoreduces the amount of waste in landfi...

Please stick the extra data plate for the appliance suppliedwith this documentation in the space provided in the "Aftersales service, data plate, guarantee" section of this booklet. Cleaning for the first time ^ Remove any protective wrapping and adhesive labels. ^ Before using for the first...

The induction principle An induction coil is located under each cooking zone. Whena cooking zone is switched on, this coil creates a magneticfield which impacts directly on the base of the pan and heatsit up. The cooking zone itself is heated up indirectly by theheat given off by the pan. An inducti...

Noises When using an induction cooking zone, the following noisescan occur in the pan, depending on what it is made of andhow it has been constructed. – On the higher power levels, it might buzz. This will decrease or cease altogether when the power level isreduced. – If the pan base is made of laye...

Pans Suitable pans include: – stainless steel pans with a magnetic base – enamelled steel pans – cast iron pans Unsuitable pans: – stainless steel pans without a magnetic base – aluminium and copper pans – glass, ceramic or earthenware pots and pans To test whether a pot or pan is suitable for use o...

Settings Melting butterDissolving gelatine 1 to 2 Making milk puddings 2 Warming small quantities of liquidCooking riceDefrosting frozen vegetablesCooking pulses 3 Warming liquid and semi-solid foodsMaking omelettes and lightly frying eggsSteaming fruitCooking dumplings 4 Steaming vegetables, fishDe...

How the hob is operated The hob is equipped with electronic sensor controls whichreact to finger contact. To operate the hob, touch the relevant sensor. Each time youtouch a sensor, an audible tone sounds. Take care to keep the control panel clean and do notplace anything on top of it. The sensors m...

Do not leave the appliance unattended whilst it is beingused. To switch the hob on ^ Touch the s sensor. 0 will appear in each of the cooking zone displays. If no further entry is made, the hob will switch itself off after a fewseconds for safety reasons. Setting and altering the power level ^ Touch...

Auto heat-up When Auto heat-up has been activated, the cooking zoneswitches on automatically at the highest power setting andthen switches to the continued cooking setting selected. Theheat-up time depends on which continued cooking settinghas been chosen (see chart). To activate Auto heat-up ^ Touc...

Booster The cooking zones are equipped with a Booster orTwinBooster (see "Guide to the appliance"). When activated, the power is boosted for a maximum of10 minutes so that large quantities can be heated up quickly,e.g. when boiling water for cooking pasta. Taking a pan off the zone whilst th...

Keeping warm function Each cooking zone has a keeping warm function. This function is for keeping food that has just been cookedwarm, i.e. food that is still hot. It is not for reheating foodthat has gone cold. If the keeping warm function has been activated, the cookingzone will switch off automati...

Switching off and residual heat indicators Switching off a cooking zone ^ Touch the "0" on the numerical keypad of the cooking zoneyou wish to use. A 0 will flash in the cooking zone display for a few seconds. If the cooking zone is still hot, the residual heat indicator willthen appear in t...

– Use a pan lid whenever possible to minimise heat loss. uncovered covered – Select a smaller pan when cooking small quantities. A smaller pan uses less energy than a larger pan with verylittle in it. – Cook with as little water as possible. – Once food has come to the boil or the oil in the pan is ...

The timer can be used for two different functions: – to set the minute minder – to set a cooking zone to switch off automatically. You can enter a time up to a maximum of 99 minutes. When the set time has elapsed 00 will appear in the display. At the same time a buzzer will sound for a few seconds. ...

To switch a cooking zone off automatically You can set a time at the end of which a cooking zone willswitch off automatically.All the cooking zones can be programmed at the same time. If the time programmed is longer than the maximumoperational time allowed, the cooking zone will switch offafter the...

To use both timer functions at the same time The minute minder and automatic switch-off functions can beused at the same time. If you have programmed in one or more switch-off times andwould like to use the minute minder as well : ^ Touch the + sensor repeatedly until 00 and min appear in the timer ...

Stop and Go Your appliance has a Stop and Go feature which, whenactivated, reduces the power of all cooking zones in use topower level 1. When Stop and Go is activated, the cookingzone power levels and the setting of the timer cannot bealtered and the hob can only be switched off. When Stop and Go i...

System lock The hob is fitted with a system lock to prevent it from beingswitched on without supervision. If the hob is switched on when the system lock is active, LC appears in the timer display for a few seconds. The system lock is deactivated if there is an interruption tothe power supply. To act...

Overheating protection All the induction coils and the cooling elements for theelectronics are fitted with an overheating protectionmechanism. Before the induction coils or cooling elementsget too hot, the overheating protection mechanism cuts in inone of the following ways: – If the booster functio...

Do not use washing-up liquid to clean the ceramic surface.Washing-up liquid will not remove all soiling and deposits.It will form an invisible coating which will cause permanentdiscolouration of the ceramic surface.Clean the hob regularly with a suitable ceramic hobcleaning agent. Wipe off all coars...

With the help of the following notes, minor faults in the performance of theappliance, some of which may result from incorrect operation can be put rightwithout contacting the Service Department. Installation work and repairs to electrical appliances must only be carried outby a suitably qualified a...

Miele offer a comprehensive range of useful accessories aswell as cleaning and conditioning products for your Mieleappliances. These can be ordered online at: or from Miele (see back cover for contact details) Pans Miele offer a wide range of pans which are perfect for Mielehobs. Please refer to the...

The appliance must only be installedand connected to the electricitysupply by a suitably qualified andcompetent person in strictaccordance with current nationaland local safety regulations.Fit the wall units and extractor hoodbefore fitting the hob to avoiddamaging the appliance. ~ The veneer or lam...

Safety distance above the appliance A minimum safety distance must be maintained between the appliance andthe cooker hood above it. See thecooker hood manufacturer's operatingand installation instructions for details. If the manufacturer's instructions arenot available for the cooker hood, aminimum ...

Safety distances to the sides andback of the hob Ideally the hob should be installed withplenty of space on either side. Theremay be a wall at the rear or a tall unit orwall on one side (right or left) (see illustrations). a Minimum distance of 50 mmbetween the back of the worktop cut-out and the re...

Installation notes Seal between the hob and theworktop Do not use sealant between the hoband the worktop. This could result indamage to the hob or the worktop ifthe hob ever needs to be removedfor servicing. The sealing strip under the edge of thetop part of the appliance provides asufficient seal f...

Building-in dimensions KM 6328 a Front b Casing depth c Mains connection box The mains connection cable (1440 mm long) is supplied separately. Hob with frame or bevelled edge 51

Installing the hob Preparing the worktop ^ Make the worktop cut-out accordingto the dimensions given in thebuilding-in diagram. Remember tomaintain the minimum safety distances (see "Safety instructions for installation"). ^ Seal the cut surfaces with a suitableheat-resistant sealant to avoi...

Granite and marble worktops Preparing the worktop a Worktop b Hob c Gap As the ceramic glass and theworktop cut-out have a certaindimensional tolerance, the size ofgap c can vary (min. 1 mm). ^ Make the worktop cut-out as shownin "Building-in dimensions".Observe the safety distances (see ...

All electrical work should be carriedout by a suitably qualified andcompetent person, in strictaccordance with current local andnational safety regulations (BS 7671in the UK). Installation, repairs and other workby unqualified persons could bedangerous. The manufacturercannot be held liable forunaut...

The electrical safety of this appliancecan only be guaranteed whencontinuity is complete between it andan effective earthing system, whichcomplies with current local and nationalsafety regulations. It is most importantthat this basic safety requirement ispresent and regularly tested and wherethere i...

In the event of any faults which you cannot remedy yourself, please contact: – your Miele dealer, or – Miele (see back cover for contact details). Please note that telephone calls may be monitored and recorded for trainingpurposes (UK only). When contacting your Dealer or Miele, please quote the mod...