Miele 9775880 - User Manual

IMPORTANT SAFETY INSTRUCTIONS 6 Children  As with any other appliance, children must be supervised.  Do not leave children unattended: Children should not be alone or unsupervised in the area where the appliance is installed. Do not al‐ low them to sit or stand on the appliance.  Children under e...

IMPORTANT SAFETY INSTRUCTIONS 7 Technical safety  Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with national and local safety regulations and the provided installation instruc‐ tions. Contact Miele’s Technical Service Departmen...

IMPORTANT SAFETY INSTRUCTIONS 10 Proper use  The cooktop gets hot when in use and remains hot for a while af‐ ter being turned off. There is a potential hazard until the residual heat indicator goes out.  When in use, the cooktop emits a significant amount of heat, which can cause objects in the v...

IMPORTANT SAFETY INSTRUCTIONS 14 Cleaning and care  Do not use a steam cleaner to clean the cooktop. The steam may reach electrical components and cause a short cir‐ cuit.  If the cooktop is built in over a self cleaning oven, the cooktop should not be used while the self cleaning process is being...

Overview 15 Cooktop a Cooking zone with TwinBooster b PowerFlex cooking zone with TwinBooster c PowerFlex cooking zone with TwinBooster bc can be combined to form PowerFlex cooking area d DirectSelection controls

Overview 16 DirectSelection controls a b c d e f g h j i m n $ k l Sensor buttons a Turning the cooktop On/Off b Control scale - Selecting the power setting - Setting the timer times c Activating and deactivating the System lock/Safety lock d Turning the booster/TwinBooster On/Off e Selecting the co...

Overview 18 Cooking zone data Cooking zone Diameter* Ø Output in watt** Inches Centimeters 208 V 240 V  7 – 11 18 – 28 Normal TwinBooster, Level 1 TwinBooster, Level 2 2200 2700 3350 2500 3100 3850  6 – 9 15 – 23 Normal TwinBooster, Level 1 TwinBooster, Level 2 1900 2700 3350 2200 3100 3850  6 – ...

Before using for the first time 19  Please adhere the extra data plate for the appliance supplied with this doc‐ umentation in the space provided in the "Technical service, data plate, warranty" section of this manual.  Remove any protective foil and stick‐ ers. Cleaning the cooktop for th...

Induction 20 How it works An induction coil is located under each cooking zone. When a zone is turned on, this coil creates a magnetic field that impacts directly on the base of the pan and heats it up. The zone itself is heated up indirectly by the heat given off by the pan.An induction cooking zon...

Induction 21 Noises When you use an induction cooking zone, the following noises may occur, depending on the type and shape of the cookware bottom:On the higher power settings, it might buzz. This will decrease or cease alto‐ gether when the power setting is re‐ duced.Cookware with bottoms made of d...

Induction 22 Cookware Suitable cookware is made of: – stainless steel with a magnetizable bottom – enamel-coated steel– cast iron Unsuitable cookware is made of: – stainless steel with a non-magnetiza‐ ble bottom – aluminum, copper– glass, ceramics, earthenware, stone‐ ware. To test whether a pot or...

Energy saving tips 23 – Use a lid whenever possible to mini‐ mize heat loss. – For small quantities, select a small pan. A small pan on a small burner uses less energy than a large, only partially filled pan on a large burner. – Cook with as little water as possible.– Once food has come to the boil ...

Power setting ranges 24 The cooktop is programmed with 9 power levels at the factory. If you wish to fine- tune a setting, you can extend the power setting range to 17 power levels (see "Programming"). Setting ranges Default (9 power levels) Extended (17 power levels) Keep warm level h h Mel...

Operation 25 Basic operation The ceramic cooktop is equipped with electronic sensor buttons that react to finger contact. During activation, the On/Off  sensor button muss be pressed somewhat longer than the oth‐ er buttons for safety reasons. Each reaction of the buttons is ac‐ knowledged with an ...

Operation 26  Fire hazard! Do not leave the cooktop unattended during operation! Please note that the heat-up time for induction cooktops is shorter than for conventional cooktops. Turning the cooktop On  Tap the  sensor button.  appears in each of the cooking zone indicators. If no further entr...

Operation 27 Setting the power level - ex‐ panded setting range  Tap the control scale between the sensor buttons. The set power level flashes in the indi‐ cator for a few seconds and then lights up constantly. The intermediate levels are shown with an illuminated point next to the number. PowerFle...

Operation 29 TwinBooster / Booster The cooking zones are equipped with a booster or TwinBooster (see "Overview – Cooking zone"). You can use the booster for a maximum of two cooking zones at the same time.When activated, the power is boosted for a maximum of 15 minutes so that large quantiti...

Operation 31 Keep warm function The keep warm function is for keeping food warm that has just been cooked, i.e., food that is still hot. It is not for reheating cold food. If the keep warm function has been ac‐ tivated, the cooking zone will turn off automatically after a maximum of 2 hours.– Only u...

Timer 32 The cooktop has to be turned on if you wish to use the timer. You can set a time up to 99 minutes. The timer can be used for two different functions: – For setting the timer– For turning off a cooking zone auto‐ matically Timer Setting Example: You want to set a time of 15 minutes.  Turn t...

Timer 33 Turning a cooking zone off au‐ tomatically You can set a time after which the cooking zone will turn off automatically. This function can be used on all zones at the same time. If the programmed time is longer than the maximum time allowed, the safety shut-off function will turn off the coo...

Timer 34 Using both timer functions at the same time The timer and automatic turn-off func‐ tions can be used at the same time.If you have programmed in one or more turn-off times, and would like to use the timer as well:  Tap the  sensor button until the in‐ dicator lights of the programmed cooki...

Additional functions 35 Stop & Go function When activated, the Stop & Go reduces the power of all cooking zones in use to power level 1. The power levels of the zones and set‐ ting of the timer cannot be changed and the cooktop can only be turned off. A set timer and booster time continue to...

Safety features 36 System lock / Safety lock The system lock and safety lock are deactivated if there is a power out‐ age. Three-finger control is the default set‐ ting. You can change the default to one-finger control (see "Program‐ ming"). Your cooktop is equipped with a safety lock to pre...

Safety features 38 Overheat protection All the induction coils and the cooling elements for the electronics are equip‐ ped with an overheating protection mechanism. To prevent the induction coils and cooling elements from over‐ heating, the overheating protection mechanism works on the affected cook...

Cleaning and care 39  Burn hazard! The burners must be turned off and allowed to cool completely.  Risk of injury! The steam from a steam cleaner could reach electrical components and cause a short circuit.Do not use a steam cleaner to clean the cooktop. All cooktop surfaces can become discolored ...

Programming 41 You can adapt the programming of the cooktop to your personal needs. Sever‐ al settings can be changed in succes‐ sion.After the programming function is start‐ ed,  (program) and  (status) will ap‐ pear in the timer display. With cooktops that have 3 cooking zones, an addition‐ al d...

Frequently asked questions 44 The following guide is intended to help you resolve problems that occur during normal operation of the appliance. If you are unable to identify or remedy the cause of the problem on your own, please contact Miele Service (see back cover for details).  Risk of injury! I...

Con @ ctivity 48 Your cooktop is communication ena‐ bled and can communicate with the ventilation hood using the wireless USB stick included with selected ventilation hoods (Con @ ctivity). The cooktop sends information on its operating sta‐ tus to the ventilation hood. The opera‐ tion of the ventil...

IMPORTANT SAFETY INSTRUCTIONS - INSTALLATION 49  Installation and connection of the cooktop to the electrical power supply may only be performed by a qualified electrician. Install the upper cabinets and venti‐ lation hood before installing the cooktop to avoid damaging it.  Reaching over a hot co...

Safety clearances 50 Safety clearance above the cooktop For a ventilation hood above the cook‐ top, always use the clearance specified by the hood manufacturer. If there are no specifications from the hood manu‐ facturer or if flammable materials (e.g. a utensil rail) are installed above the cooktop...

Safety clearances 51 Safety clearances to the sides and back of the cooktop In installing a cooktop there may be an optionally high cabinet or room wall against the rear side and one of the sides (right or left) (see illustrations).  minimum distance between the back of the counter cut-out and the ...

Safety clearances 52 Minimum clearance under‐ neath the cooktop To ensure proper ventilation of the cooktop, a minimum clearance is re‐ quired between the appliance and an oven, protective base, or drawer.The minimum clearance from the bot‐ tom of the cooktop to – the top of the oven must be ⁹/₁₆...

Safety clearances 53 Safety distance from the wall covering If a wall covering is installed, a minimum safety distance must be maintained be‐ tween the countertop cut-out and the covering, since high temperatures can dam‐ age these materials.If the covering is made of a combustible material (such as...

Ventilation 54 a Front b Ventilation cut-out in the rear wall of the cabinetry 19" x 3" (482 x 75 mm) (Slight) ventilation also takes place when the cabinet is directly against the wall. c Protective base The installation of a protective base beneath the cooktop is not required, but permitte...

Instructions for installation 55 Seal between cooktop and counter In case a disassembly is required, the appliance must not be perma‐ nently sealed into the countertop when installed. The sealing strip un‐ der the edge of the appliance pro‐ vides a sufficient seal for the coun‐ tertop. If the applia...

Installation dimensions 56 a Front b Installation height c Flexible metal hose with power cord, L = 3' 11¹/₄" (1200 mm) d Data plate

Installation 57 Preparing the counter  Create the counter cut-out as shown in the cooktop diagram and in the de‐ tailed drawing. Remember to main‐ tain a minimum safety distance (see "Safety clearances").  Seal any wooden counter surfaces with a special varnish, silicone rub‐ ber, or resin...

Electrical connection 58  ATTENTION: Before installation or servicing, dis‐ connect the power supply by either removing the fuse, shutting off the main power or manually "tripping" the circuit breaker. Installation work and repairs should only be performed by a qualified technician in accor...

Electrical connection 59 Connection  Ensure that the connection data on the data plate (voltage, frequency, and fuse rating) match those of your electrical supply. The data plate is located underneath the cooktop. The cooktop is approved and ready for connection to a grounded connector with three c...

Caring for the environment 60 Disposal of the packing mate‐ rial The cardboard box and packing materi‐ als protect the appliance during ship‐ ping. They have been designed to be biodegradable and recyclable.Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reac...

Technical service, data plate, warranty 61 After sales service In the event of a fault which you cannot easily correct yourself, please contact: – your Miele dealer, or– the Miele Technical Service Department. See back cover for contact details. Please quote the model and serial number of your appli...

9 Independence WayPrinceton, NJ 08540Phone:Fax:www.mieleusa.com U.S.A. Miele, Inc. National Headquarters Please have the model and serial numberof your appliance available beforecontacting Technical Service. Canada ImporterMiele Limited Headquarters and Miele Centre 800-843-7231609-419-4298 Technica...