Metra 99-7519B - Manuals

Turn over the 99-7519B housing,take the climate control and screwsremoved from the factory panel andattach the climate control to the kithousing using the factory screws.(Figure A) 1 Slide the DIN cage into the RadioHousing and secure by bending themetal locking tabs down. (Figure C) 3 A C D Slide t...

Mount the ISO Brackets to the headunit with the screws supplied withthe unit. (Figure C) 3 C D Slide the pocket into the bottomsection of the kit housing. (Figure B) 2 Slide the head unit into the radioopening until the side clips engage. (Figure D) 4 ISO DIN HEAD UNIT PROVISION 99-7519B KIT ASSEMBL...

Slide the appropriate DDIN bracketinto the kit housing. (Figure B) 3 C Cut the rib in the middle of the 99-7519B housing to make room for theDDIN brackets. (Figure A) 2 Slide the DDIN radio unit into DDINbrackets and secure the unit to thekit using the screws supplied withthe head unit. (Figure C) 4...

Slide the appropriate DDIN bracketinto the kit housing. (Figure B) 3 C Cut the rib in the middle of the 99-7519B housing to make room for theDDIN brackets. (Figure A) 2 Slide the stacked ISO DIN units intothe DDIN bracket assembly andsecure the units to the kit using thescrews supplied with the head...

FINAL ASSEMBLY 1 Locate the factory wiring harness in the dash and make the connection as shown. Metra recomends using the proper mating adapter and making the connections asshown. (Isolate and individually tape off the ends of any unused wires to prevent 2 Re-connect the negative battery terminal a...