Metra 99-7504 - Manuals

3 99-7504 KIT ASSEMBLY A B C DIN MOUNT RADIO PROVISION Slide the DIN cage into the RadioHousing and secure by bending themetal locking tabs down. (Figure A) 1 Slide the aftermarket radio unit into thecage and secure. (Figure B) 2 Snap the Trim plate into the RadioHousing. (Figure B) 3 Attach the (2)...

99-7504 KIT ASSEMBLY 4 A B ISO DIN MOUNT RADIO PROVISION Mount the ISO Brackets to the after-market radio using the screws sup-plied with the radio. (Figure A) 1 Slide the radio into the radio housinguntil it snaps into place. (Figure B) 2 Attach the trim plate supplied withthe kit to the front of t...

Note: When inserting the 99-7504 into the sub dash be aware of the locations pointed out in Figure B . If the 99-7504 does not snap in correctly the result will be a noticeable gap on eachside of the installation kit. (Figure C) 99-7504 FINAL ASSEMBLY FINAL ASSEMBLY (A) Strip wire ends back 1/2"...

FINAL WIRING CONNECTIONS Make wiring connections using the EIA color code chart shown below and the instructions included with thehead unit. Metra recommends making connections as shown below; Strip, Splice, Solder, Tape. Isolate and individually tape off ends of any unused wires to prevent electric...