Metra 99-7011 - Manuals

3 99-7011 KIT PREPARATION Secure the hazard switch assembly into the radio housing using the factory hard-ware. Snap the a/c vents into the radio housing. (Figure A) Use the (7) plastic factory clips previously removed during dash disassembly andattach where shown. (Figure B) 1 2 PAS SEN GER PA S S ...

99-7011 KIT ASSEMBLY 4 A B C DIN RADIO PROVISION WITH POCKET Slide the DIN cage into the RadioHousing and secure by bending themetal locking tabs outward. (Figure A) 1 Slide the aftermarket radio into thecage until it snaps into place. (Figure B) 2 Snap the pocket into the radio hous-ing. (Figure C)...

99-7011 KIT ASSEMBLY 5 A B C ISO MOUNT RADIO PROVISION WITH POCKET Mount the ISO Brackets to the radiousing the screws supplied with theradio. (Figure A) 1 Slide the radio into the radio housinguntil it snaps into place. (Figure B) 2 Snap the trim plate onto the front ofthe radio housing. (Figure B)...

99-7011 FINAL ASSEMBLY FINAL ASSEMBLY (A) Strip wire ends back 1/2" B) Twist ends together C) Solder D) Tape A B C D Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individ-ually tape off the ends of an...