Page 3 - IMPORTANT SAFEGUARDS
IMPORTANT SAFEGUARDS Before the ice maker is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. MAXX ICE strongly recommends that you have a professional install your new machine. The warranty may be affected or voided by an incorrect instal...
Page 5 - Cube
TECHNICAL SPECIFICATIONS 4 Model: Electrical power: Power consumption: Ice-making/Ice-harvest rated current: Refrigerant: High/Low Side Pressure: Width × Depth × Height (with feet): Width × Depth × Height (with casters) Unit weight: Ice-making capacity: Max. ice storage: Ice shape: Ice cube dimensio...
Page 6 - INSTALLATION; Remove packaging materials
5 INSTALLATION Remove packaging materials IMPORTANT: Do not remove any permanent instruction labels or the data label on your ice maker. Remove tape and glue from your ice maker before using. • To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or glue residue can also ...
Page 8 - Recommended grounding method
7 INSTALLATION ** The ice maker should always be plugged into its own individual electrical outlet. ** It is recommended that a separate circuit, serving only your ice maker, be provided. Use receptacles that cannot be turned off by a switch or pull chain. The fuse (or circuit breaker) size should b...
Page 15 - What parts should be kept clean; Cleaning of ice making system)
14 CLEANING & MAINTANANCE: CAUTION: If the ice maker is left unused for a long time, before the next use it must be thoroughly cleaned. Follow carefully any instructions provided for cleaning or use of sanitizing solution. Do not leave any solution inside the ice maker after cleaning. Periodic c...
Page 18 - Major Functions
17 6. Prepare a sanitizing solution made of 1 ounce of household bleach and 2 gallons of hot water (95º to 115ºF). Wipe the entire bin inside and outside, covering the entire surface of the walls. 7. Fill a spray bottle with the sanitizing solution and spray all corners and edges mak- ing sure to co...
Page 19 - TROUBLESHOOTING; Before Calling for Service; Problem
18 TROUBLESHOOTING Before Calling for Service If the unit appears to be malfunctioning, read through the OPERATION section of this manual first. If the problem persists, check the Troubleshooting Guide below and on the following page. The problem could be something very simple that can be solved wit...