Maxx Ice MIB580 - User Manual

Page 2 - Contents

Page | 2 Contents ICE MAKER SAFETY 3 IMPORTANT SAFEGUARDS 4-5 MAJOR FEATURES 5 TECHNICAL INFORMATION 6 INTRODUCTION 6 COMPONENT INFORMATION 6 ICE MAKER INSTALLATION Unpacking 7 Remove Packaging Material 7 Location Requirements 8-9 Typical Installation of Ice Storage Bin 9 Electrical Requirements 9 C...

Page 3 - ICE MAKER SAFETY; DANGER; NOTE: IMPORTANT SAFETY INSTRUCTIONS; SAVE THESE INSTRUCTIONS

Page | 3 ICE MAKER SAFETY Always read and obey all safety messages. This is the Safety Alert Symbol This symbol alerts you to potential hazards that can injure or kill you and others All safety messages will follow the Safety Alert Symbol and either the words “DANGER”, “WARNING” OR “CAUTION” DANGER ...

Page 4 - IMPORTANT SAFEGUARDS

Page | 4 IMPORTANT SAFEGUARDS Before the ice maker is used, it must be properly positioned and installed as described in this manual, so read the manual carefully We strongly recommend that you have a professional install your new machine The warranty may be affected or voided by an incorrect instal...

Page 5 - Electrical Connection; Major Features; Technical Information; MODEL

Page | 5 • DO NOT use solvent-based cleaning agents or abrasives on the interior These cleaners may transmit taste to the ice cubes, or damage or discolor the interior • The ice machine cleaner contains acids DO NOT use or mix with any other solvent-based cleaner products Use rubber gloves to protec...

Page 7 - Ice Maker Installation; UNPACKING; LOCATION REQUIREMENTS; Excessive Weight Hazard; Use two or more persons to move and install ice maker.; WARNING; Normal operating ambient temperature should be between

Page | 7 Ice Maker Installation POWER SUPPLY CORD - NOT INCLUDED. MUST HAVE A 3-PRONG GROUNDING PLUG. UNPACKING This unit is an ice maker only. It requires a separate ice storage bin. REMOVE PACKAGING MATERIALS IMPORTANT: Do not remove any permanent instruction labels or the data label on your ice m...

Page 8 - INSTALLATION CLEARANCE; TOP VIEW of ICE MACHINE

Page | 8 INSTALLATION CLEARANCE TOP VIEW of ICE MACHINE REAR VIEW of ICE MACHINE

Page 9 - REAR VIEW if ATTACHING to an ICE BIN; O INSTALL ICE MACHINE to a ICE STORAGE BIN

Page | 9 REAR VIEW if ATTACHING to an ICE BIN The (2) security latch holes are used when securing to an ice bin. T O INSTALL ICE MACHINE to a ICE STORAGE BIN  Two connecting brackets are attached to the upper rear edge of the ice storage bin.  Turn the brackets up (180°) and use two screws to conn...

Page 10 - If the machine is to be stacked; WATER SUPPLY; Tools required: 3/8” open-end wrench and Phillips screwdriver; Connecting the water line:

Page | 10 RECOMMENDED GROUNDING METHOD POWER SUPPLY CORD - NOT INCLUDED. MUST HAVE A 3-PRONG GROUNDING PLUG. For your personal safety, this appliance must be grounded. To minimize possible shock hazard, the cord must be plugged into a mating 3-pronged and grounding-type wall receptacle, grounded in ...

Page 11 - INSTALLATION TYPES; Cleaning before use; Operation; FINAL CHECK LIST BEFORE OPERATION; Control Panel; Making Ice Process:; Water Fill Process:

Page | 11 INSTALLATION TYPES This ice maker has only been designed for mobile (free-standing) installation Mobile installation: An enclosed installation will allow you to install the ice cube machine under a counter or in a kitchen cabinet provided the required clearance space around the ice maker i...

Page 12 - OPERATION OF THE CONTROL PANEL:; TO CLEAN THE MACHINE,

Page | 12 OPERATION OF THE CONTROL PANEL: 1. When the unit is plugged in and turn on the power switch. Only “OFF” displays on the LCD screen. 2. Press the ON/OFF button, the LCD screen lights. If normal, only the words of “Water Fill” and “3 Min To End” displays on the LCD screen. The ice maker will...

Page 14 - depending on temperature and operating conditions.; HOW THE MACHINE USES WATER

Page | 14 HOW THE ICE MACHINES MAKES ICE Turn the power switch to the ON position. Then press ON/OFF button in front panel. The LCD screen lights. After about 3 minutes the machine will automatically go into the ice-making stage. There are two distinct cycles: freeze and harvest. In the freeze cycle...

Page 15 - Cleaning and Maintenance; WHAT SHOULDN’T BE DONE; EXTERIOR CLEANING; CAUTION

Page | 15 Cleaning and Maintenance Periodic cleaning and proper maintenance will ensure efficiency, top performance, and long life. The maintenance intervals listed are based on normal conditions You may want to shorten the intervals if you have pets or there are other special considerations WHAT SH...

Page 16 - WATER DISTRIBUTION TUBE CLEANING

Page | 16 Cleaning and Maintenance WATER DISTRIBUTION TUBE CLEANING When you find that the ice cubes are incompletely formed or the output of ice cubes is low, the water distribution tube may be blocked Set the power switch to OFF Unscrew the six screws holding the top panel and remove the panel You...

Page 17 - CONDENSER CLEANING; Troubleshooting; BEFORE CALLING FOR SERVICE

Page | 17 CONDENSER CLEANING 1 See drawing 2 The air cooled condenser should be vacuumed once or twice per year to remove any lint that may have been drawn into it Using a tool that seems like a probe to remove any lint from the condenser fins. NOTE: Do not touch condenser fins. They are sharp and c...

Page 18 - Troubleshooting Guide; PROBLEM

Page | 18 Troubleshooting Guide PROBLEM POSSIBLE CAUSE PROBABLE CORRECTION The machine doesn't operate The ice maker is unplugged Plug the ice maker in The fuse is blown Replace fuse If it happens again, call for service to check for a short circuit in the ice maker The ice maker power switch is OFF...

Maxx Ice MIB580 - User Manual

Table of Contents:

Summary

Other Maxx Ice Ice Makers Models