Page 2 - TABLE OF CONTENTS; Page
1 TABLE OF CONTENTS Page IMPORTANT SAFEGUARDS .............................................................................. 2–3 How to Connect Electricity ........................................................................................ 2 Proper Disposal of the Ice Maker........................
Page 3 - IMPORTANT SAFETY INFORMATION; HOW TO CONNECT ELECTRICITY; For personal safety, this appliance must be properly grounded.; grounded; PROPER DISPOSAL OF THE ICEMAKER; Otherwise it may hurt your hands.
2 IMPORTANT SAFETY INFORMATION n HOW TO CONNECT ELECTRICITY For personal safety, this appliance must be properly grounded. · A standard electrical supply, properly grounded in accordance with the National Electrical Code and Local codes and ordinances is required. · Please make sure that the unit is...
Page 4 - SAFETY ALERT SYMBOL; Your safety and the safety of others are very important.
3 · This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by person responsible for their safety. n SAFET...
Page 6 - ICEMAKER INSTALLATION; Unpacking; Remove tape and glue from your icemaker before using.; Location Requirements; Excessive Weight Hazard
5 ICEMAKER INSTALLATION Unpacking Remove packaging materials IMPORTANT: Do not remove any permanent instruction labels or the data label on your icemaker. Remove tape and glue from your icemaker before using. l To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or glue ...
Page 7 - The plug must be accessible after installation.; Leveling the Ice Maker
6 l To ensure proper ventilation for your icemaker, the front of the unit must be completely unobstructed. Allow more than 4” clearance at rear, 0.6” at top and sides for proper air circulation. The installation should allow the ice maker to be pulled forward for servicing if necessary. l Choose a w...
Page 8 - Electrical Requirements; Electrical hock Hazard; up
7 recommend using a carpenter’s level to check the machine. You will find that the casters make it easy for one person to move the machine. This is useful for cleaning and sanitizing the surface on which the ice maker is installed because it allows you to move the unit and have easy access to the su...
Page 9 - Water Supply and Drain Connection; Check for leaks after connection.; Connecting the water line:
8 Water Supply and Drain Connection The water supply and drain should be roughed in and ready at the point of installation. A wall outlet directly behind the ice machine will make installation easier. IMPORTANT: 1. All installations must be in accordance with local plumbing code requirements. 2. Mak...
Page 10 - Installation Types; Enclosed Installation:; Push the ice maker into position.
9 1. Find the floor drain near the icemaker. The distance should be less than 5 feet as the length of the long drain water pipe provided with the icemaker is about 5 feet. 2. Find the drain outlet on the back of icemaker. Connect one end of the long drain pipe to the drain out let of the machine, th...
Page 11 - OPERATION; Final Check List before Operation
10 OPERATION Final Check List before Operation 1.Have all packing materials and tape been removed from the interior and exterior of the icemaker? 2.Do you clean the ice storage bin? 3.Have the installation instructions been followed, including connecting the machine to water, drain and electricity? ...
Page 12 - Ice will automatically harvest to the ice storage bin.; How the machine Makes Ice; Freeze; Ice harvest stage
11 3. Ice will automatically harvest to the ice storage bin. 4. When ice collected in the bin more quantity to cover the ice-full sensor. The icemaker will stop working. When you take away some ice make the sensor free, it will restart to make ice. IMPORTANT: -Although the unit has been tested at fa...
Page 13 - How adjust the size of ice cubes; Press and hold the “; Adjust; ” button for at least; ICE Making; ” LED; Smaller ice setting:; By pressing the “Clean” button, you can; How the machine uses the water
12 How adjust the size of ice cubes 1. Press and hold the “ Adjust ” button for at least 3 seconds. The unit will enter the Ice Size Adjustment mode. The “ ICE Making ” LED (green) will be blinking continuously during the ice size adjustment. Release the button when the LED blinks continuously to ad...
Page 14 - ejected from the icemaker assembly.
13 concentrated with mineral impurities. During the ice making process, fresh water enter into the water trough continuously as the water in water trough is freeze continuously in the evaporator. Normal Sounds Your new icemaker may make sounds that are not familiar to you. Most of the new sounds are...
Page 15 - MAINTENANCE AND CLEANING; What shouldn’t be done; There are 4 things to keep clean:; Exterior Cleaning
14 7. Drop the door open to allow for circulation and prevent mold and mildew. 8. Leave water supply line and power cord disconnected until ready to reuse. MAINTENANCE AND CLEANING Periodic cleaning and proper maintenance will ensure efficiency, top performance, and long life. The maintenance interv...
Page 16 - Condenser Cleaning; unit compartment with a brush attachment on a vacuum cleaner.; Interior Cleaning; Condenser surface
15 Stainless steel models can discolor when exposed to chlorine gas and should be cleaned. Clean stainless steel models with a mild detergent and warm water solution and a damp cloth. Never use abrasive cleaning agents. NOTICE : Stainless steel models exposed to chlorine gas and moisture, such as ar...
Page 18 - Sanitizing the Ice-Making System
17 4. Keep the ice maker connected to the water supply. Pour 8 oz. of Nickel-Safe Ice Maker Cleaner Solution into the water tank. 5. Turn the power switch ON. Within 3 minutes, press the CLEAN button. The machine will run the Automatic Clean mode. The green Ice Making and the yellow Ice harvest LEDs...
Page 19 - TROUBLESHOOTING; Before Calling for Service; Problem
18 TROUBLESHOOTING Before Calling for Service If the unit appears to be malfunctioning, read through the OPERATION section of this manual first. If the problem persists, check the TROUBLESHOOTING GUIDE on the following pages. The problem could be something very simple which can be solved without a s...