Page 2 - SPECIFICATIONS; Applicable battery cartridge and charger; Symbols; Intended use; Vibration
2 ENGLISH SPECIFICATIONS Model: TW140D Fastening capacities Standard bolt M8 - M16 High tensile bolt M6 - M12 Square drive 9.5 mm No load speed 0 - 2,600 min -1 Impacts per minute 0 - 3,200 min -1 Overall length 161 mm Rated voltage D.C. 10.8 V - 12 V max Net weight 1.0 - 1.2 kg • Due to our continu...
Page 3 - SAFETY WARNINGS; General power tool safety warnings
3 ENGLISH SAFETY WARNINGS General power tool safety warnings WARNING: Read all safety warnings, instruc- tions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings ...
Page 4 - SAVE THESE INSTRUCTIONS.
4 ENGLISH 2. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. 3. Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making ...
Page 6 - Battery protection system; Lighting up the front lamp
6 ENGLISH Indicating the remaining battery capacity Only for battery cartridges with the indicator 1 2 ► 1. Indicator lamps 2. Check button Press the check button on the battery cartridge to indi - cate the remaining battery capacity. The indicator lamps light up for a few seconds. Indicator lamps R...
Page 7 - Reversing switch action; ASSEMBLY; Selecting correct impact socket; Installing or removing impact socket; Installing hook
7 ENGLISH Reversing switch action 1 A B ► 1. Reversing switch lever CAUTION: Always check the direction of rotation before operation. CAUTION: Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may dam - age the tool. CAUTI...
Page 8 - OPERATION
8 ENGLISH OPERATION CAUTION: Always insert the battery cartridge all the way until it locks in place. If you can see the red indicator on the upper side of the button, it is not locked completely. Insert it fully until the red indicator cannot be seen. If not, it may accidentally fall out of the too...
Page 9 - MAINTENANCE
9 ENGLISH MAINTENANCE CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. NOTICE: Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. To maintain pro...
Page 12 - Makita Corporation
www.makita.com Makita Europe N.V. Makita Corporation 3-11-8, Sumiyoshi-cho,Anjo, Aichi 446-8502 Japan Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium 885641-227EN20171205