Lexmark XM3100 - Manuals

4 3 2 1 5 1 Right side 304.8 mm (12 in.) 2 Front 508 mm (20 in.) 3 Left side 203.2 mm (8 in.) 4 Rear 203.2 mm (8 in.) 5 Top 800 mm (31.49 in.) Printer configurations CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until ne...

Basic model 1 2 3 4 5 6 7 1 Display 2 Automatic document feeder (ADF) 3 ADF tray 4 ADF bin 5 Standard bin 6 Multipurpose feeder 7 Standard 550 ‑ sheet tray Learning about the printer 13

Configured model 1 2 3 1 Optional 250 ‑ sheet tray 2 Optional 550 ‑ sheet tray 3 Optional stapler Using the Embedded Web Server Note: This feature is available only in network printers or printers connected to print servers. If the printer is installed on a network, then you can use the Embedded Web...

3 Press Enter . The Embedded Web Server page appears. Understanding the basic functions of the scanner • Make quick copies or set the printer to perform specific copy jobs. • Send a fax using the printer control panel. • Send a fax to multiple fax destinations at the same time. • Scan documents and ...

Understanding the printer control panel Using the printer control panel 1 2 3 4 5 6 7 8 Use the To 1 Printer control panel • View the printer status and messages. • Set up and operate the printer. 2 Home button Go to the home screen. 3 Sleep button Enable Sleep mode or Hibernate mode. Do the followi...

Indicator light color and its corresponding printer status Indicator light Printer status Off The printer is off or in Hibernate mode. Blinking green The printer is warming up, processing data, or printing. Solid green The printer is on, but idle. Blinking red The printer requires user intervention....

Touch To 5 FTP Access the File Transfer Protocol (FTP) menus and scan documents directly to an FTP server. 6 Arrows Scroll up or down. 7 Forms and Favorites Quickly find and print frequently used online forms. 8 Menu icon Access the printer menus. Note: The menus are available only when the printer ...

Feature Description Warning If an error condition occurs, then this icon appears. Status message bar • Show the current printer status such as Ready or Busy . • Show printer conditions such as Toner Low or Cartridge Low . • Show intervention messages so the printer can continue processing. Printer I...

Other touch-screen buttons Touch To Accept Save a setting. Cancel • Cancel an action or a selection. • Exit a screen and return to the previous screen without saving changes. Reset Reset values on the screen. Understanding the printer control panel 20

Setting up and using the home screen applications Notes: • Your home screen may vary, depending on your home screen customization settings, administrative setup, andactive applications. Some applications are supported only in select printer models. • There may be additional solutions and application...

3 Click Advanced > TCP/IP . 4 Look for IPv4 Address . Finding the IP address of the printer Note: Make sure your printer is connected to a network or to a print server. You can find the printer IP address: • From the top left corner of the printer home screen. • From the TCP/IP section in the Net...

Understanding the different applications Use To Card Copy Scan and print both sides of a card on a single page. For more information, see “Setting up Card Copy”on page 24. Fax Scan a document, and then send it to a fax number. For more information, see “Faxing” on page 109. Forms and Favorites Quick...

Use To Streamline work processes by letting you quickly find and print frequently used online forms directlyfrom the printer home screen. Note: The printer must have permission to access the network folder, FTP site, or Web site where the bookmark is stored. From the computer where the bookmark is s...

3 Change the default scanning options, if necessary. • Default tray —Select the default tray to be used for printing scan images. • Default number of copies —Specify the number of copies that should automatically print when the application is used. • Default contrast setting —Specify a setting to in...

1 Open a Web browser, and then type the printer IP address in the address field. Note: View the printer IP address on the printer home screen. The printer IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. 2 Click Settings > Apps > Apps Management > Mu...

To use the application, touch Scan to Network on the printer home screen, and then follow the instructions on the printer display. Setting up Remote Operator Panel This application shows the printer control panel on your computer screen and lets you interact with the printer controlpanel, even when ...

Additional printer setup Installing internal options CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cordfrom the electrical outlet before continui...

Accessing the controller board CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cordfrom the electrical outlet before continuing. If you have any ot...

2 1 3 4 1 Memory card connector 2 Option card connector 3 Printer hard disk connector 4 Lexmark Internal Solutions Port connector 4 Close the shield, and then the access door. 1 2 Installing a memory card CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware...

Installing an optional card CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cordfrom the electrical outlet before continuing. If you have other dev...

Installing an Internal Solutions Port The controller board supports one optional Lexmark Internal Solutions Port (ISP). Note: This task requires a flathead screwdriver. CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after se...

13 Close the controller board shield. 14 Close the ISP exterior cover. Note: When the printer software and any hardware options are installed, it may be necessary to manually add the options in the printer driver to make them available for print jobs. For more information, see “Updating availableopt...

Removing a printer hard disk Warning—Potential Damage: Controller board electronic components are easily damaged by static electricity. Touch something metal on the printer before touching any controller board electronic components or connectors. 1 Access the controller board. For more information, ...

Installing hardware options Order of installation CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely. CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices...

Setting up the printer software Installing the printer software Notes: • If you installed the printer software on the computer before but need to reinstall the software, then uninstallthe current software first. • Close all open software programs before installing the printer software. • For Macinto...

In Windows 7 or earlier a Click or click Start , and then click Run . b In the Start Search or Run dialog, type control printers . c Press Enter , or click OK . 2 Depending on your device, do either of the following: • Press and hold the printer you want to update. • Right ‑ click the printer you wa...

Networking Notes: • Purchase a MarkNet TM N8350 wireless network adapter first before setting up the printer on a wireless network. For information on installing the wireless network adapter, see the instruction sheet that came with theadapter. • A Service Set Identifier (SSID) is a name assigned to...

– This feature is supported only in Mac OS X version 10.5. a From the Apple menu, navigate to: System Preferences > Print & Fax b Click + , and then navigate to: AppleTalk > select your printer > Add Preparing to set up the printer on a wireless network Notes: • Make sure your wireless ...

– To find the WPA/WPA2 preshared key or passphrase for the wireless network, see the documentation thatcame with the access point, see the Embedded Web Server associated with the access point, or consult yoursystem support person. Connecting the printer using the Wireless Setup Wizard Before you beg...

Using the Personal Identification Number (PIN) method 1 From the printer control panel, navigate to: > Network/Ports > Network [x] > Network [x] Setup > Wireless > Wi ‑ Fi Protected Setup > Start PIN Method 2 Copy the eight ‑ digit WPS PIN. 3 Open a Web browser, and then type the I...

6 Type the new IP address in the “Printer Name or IP Address” field. 7 Click OK > Close . For Macintosh users 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer control panel. The IP address appears as four sets of ...

f Click OK , and then close all the dialogs. g Print a test page to verify printer installation. Verifying printer setup When all hardware and software options are installed and the printer is turned on, verify that the printer is set upcorrectly by printing the following: • Menu settings page —Use ...

Loading paper and specialty media The selection and handling of paper and specialty media can affect how reliably documents print. For more information,see “Avoiding jams” on page 238 and “Storing paper” on page 79. Setting the paper size and type From the home screen, navigate to: > Paper Menu &...

6 Insert the tray. 7 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded inthe tray. Note: Set the correct paper size and paper type to avoid paper jams and print quality problems. Loading the multipurpose feeder Use the multipurpose feeder w...

• Load envelopes with the flap on the left side facedown. Warning—Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self ‑ stick adhesives. These envelopes may severely damage the printer. 5 From the printer control panel, set the paper size and paper type...

Linking and unlinking trays When the paper size and paper type for any trays are the same, the printer links those trays. When one linked traybecomes empty, paper feeds from the next linked tray. We recommend giving all unique paper, such as letterhead anddifferent colored plain papers, a different ...

Using the printer control panel 1 From the home screen, navigate to: > Paper Menu > Custom Names 2 Select a custom name, and then type a custom paper type name. 3 Touch . 4 Touch Custom Types , and then verify that the new custom paper type name has replaced the custom name. Assigning a custom...

Paper and specialty media guide Notes: • Make sure the paper size, type, and weight are set correctly on the computer or printer control panel. • Flex, fan, and straighten specialty media before loading it. • The printer may print at a reduced speed to prevent damage to the fuser. • For more informa...

• To optimize performance and minimize jams, do not use envelopes that: – Have excessive curl or twist – Are stuck together or damaged in any way – Have windows, holes, perforations, cutouts, or embossing – Have metal clasps, string ties, or folding bars – Have an interlocking design – Have postage ...

Tips on using card stock Card stock is heavy, single ‑ ply specialty media. Many of its variable characteristics, such as moisture content, thickness, and texture, can significantly impact print quality. Print samples on the card stock being considered for use beforebuying large quantities. • From t...

Moisture content The amount of moisture in paper affects both print quality and the ability of the printer to feed the paper correctly.Leave paper in its original wrapper until it is time to use it. This limits the exposure of paper to moisture changes thatcan degrade its performance. Condition pape...

• Do not mix paper sizes, types, or weights in the same tray; mixing results in jams. • Do not use coated papers unless they are specifically designed for electrophotographic printing. Selecting preprinted forms and letterhead Use these guidelines when selecting preprinted forms and letterhead: • Us...

Storing paper Use these paper storage guidelines to help avoid jams and uneven print quality: • For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40 percent. Mostlabel manufacturers recommend printing in a temperature range of 18–24°C (65–75°F) with rela...

Supported paper types and weights The standard tray supports 60–90 ‑ g/m 2 (16–24 ‑ lb) paper weights. The optional tray supports 60–120 ‑ g/m 2 (16–32 ‑ lb) paper weights. The multipurpose feeder supports 60–163 ‑ g/m 2 (16–43 ‑ lb) paper weights. Paper type 250 ‑ or 550 ‑ sheet tray Multipurpose f...

Printing Printing forms and a document Printing forms Use the Forms and Favorites application to quickly and easily access frequently used forms or other information thatis regularly printed. Before you can use this application, first set it up on the printer. For more information, see “Settingup Fo...

Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbersseparated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Print Settings > Quali...

Notes: • A flash drive icon appears on the printer home screen when a flash drive is inserted. • If you insert the flash drive when the printer requires attention, such as when a jam has occurred, then theprinter ignores the flash drive. • If you insert the flash drive while the printer is processin...

Recommended flash drives File type • Lexar JumpDrive FireFly (512MB and 1GB) • SanDisk Cruzer Micro (512MB and 1GB) • Sony Micro Vault Classic (512MB and 1GB) Documents: • .pdf • .xps Images: • .dcx • .gif • .jpeg or .jpg • .bmp • .pcx • .tiff or .tif • .png • .fls Printing confidential and other he...

2 Touch Submit . Printing confidential and other held jobs Note: Confidential and Verify print jobs are automatically deleted from memory after printing. Repeat and Reserve jobs are held in the printer until you delete them. For Windows users 1 With a document open, click File > Print . 2 Click P...

• If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Configuration > Other Settings tab > Security > Confidential Print Setup . 3 Modify the settings: • Set a maximum number of PIN entry attempts. When a user exceeds that number, all of the ...

Copying Automatic document feeder (ADF) Scanner glass AB C Use the ADF for multiple ‑ page documents. Use the scanner glass for single pages, small items (such as postcards orphotos), transparencies, photo paper, or thin media (such as magazineclippings). Making copies Making a quick copy 1 Load an ...

3 From the home screen, navigate to: Copy > specify the copy settings > Copy It Copying using the scanner glass 1 Place an original document facedown on the scanner glass in the upper left corner. 2 From the home screen, navigate to: Copy > specify the copy settings > Copy It If you have...

3 Navigate to: Copy to > select the tray that contains transparencies > Copy It If there are no trays that contain transparencies, then navigate to: Manual Feeder > > select the size of the transparencies > > Transparency > 4 Load transparencies into the multipurpose feeder, and...

Making copies using paper from a selected tray 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazineclippings) into the ADF tray. Place...

Collated Not collated 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazineclippings) into the ADF tray. Place these items on the scann...

Notes: • Make sure to set the paper size to letter, legal, A4, or JIS B5. • Make sure to set the copy size to 100%. 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo pape...

Placing information on copies Placing a header or footer on pages 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazineclippings) into ...

Canceling a copy job while pages are being printed 1 From the home screen, touch Cancel Job , or press on the keypad. 2 Touch the job you want to cancel. 3 Touch Delete Selected Jobs . Understanding the copy options Copy from This option opens a screen where you can select the paper size of the orig...

E-mailing Automatic document feeder (ADF) Scanner glass AB C Use the ADF for multiple ‑ page documents. Use the scanner glass for single pages, small items (such as postcards orphotos), transparencies, photo paper, or thin media (such as magazineclippings). You can use the printer to e ‑ mail scanne...

3 Enter the appropriate information, and then click Submit . Creating an e-mail shortcut Creating an e-mail shortcut using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP ...

E-mailing a document You can use the printer to e ‑ mail scanned documents to one or more recipients in a number of ways. You can type the e ‑ mail address, use a shortcut number, or use the address book. You can also use the Multi Send or MyShortcut application from the printer home screen. For mor...

Sending an e ‑ mail using the address book 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazineclippings) into the ADF tray. Place the...

3 From the home screen, navigate to: E-mail > Recipient(s) > type the e ‑ mail address > Done > Send as 4 Touch the button that represents the file type you want to send. • PDF —Create a single file with multiple pages. • Secure PDF —Create an encrypted PDF file that protects the file co...

Faxing Note: Fax capabilities may not be available on all printer models. Automatic document feeder (ADF) Scanner glass AB C Use the ADF for multiple ‑ page documents. Use the scanner glass for single pages, small items (such as postcards orphotos), transparencies, photo paper, or thin media (such a...

Initial fax setup Many countries and regions require outgoing faxes to contain the following information in a margin at the top or bottomof each transmitted page, or on the first page of the transmission: fax name (identification of the business, other entity,or individual sending the message) and f...

Choosing a fax connection Scenario 1: Standard telephone line Setup 1: Printer is connected to a dedicated fax line To connect: 1 Connect one end of the telephone cable that came with the printer to the port of the printer. 2 Connect the other end of the telephone cable to an active analog wall jack...

Setup 2: Printer is sharing the line with an answering machine Connected to the same telephone wall jack PHONE LINE To connect: 1 Connect one end of the telephone cable that came with the printer to the port of the printer. 2 Connect the other end of the telephone cable to an active analog wall jack...

Scenario 3: VoIP telephone service To connect: 1 Connect one end of a telephone cable to the port of the printer. 2 Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the VoIP adapter. The port labeled Phone Line 2 or Fax Port is not always active. You may need to p...

Scenario 4: Digital telephone service through a cable provider Setup 1: Printer is connected directly to a cable modem 1 Connect one end of the telephone cable that came with your printer to the port of the printer. 2 Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port ...

Connecting the printer to a wall jack in Germany The German wall jack has two kinds of ports. The N ports are for fax machines, modems, and answering machines. TheF port is for telephones. N F N Connect the printer to any of the N ports. PHONE LINE N F N 1 Connect one end of the telephone cable that...

3 If you want to connect a telephone and answering machine to the same wall jack, then connect the devices asshown. Note: Do not remove the adapter plug from the port of the printer if you are connecting to a serial or cascaded telephone system. Connecting to a distinctive ring service A distinctive...

Setting the date and time You can set the date and time so that they are printed on every fax you send. 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numberssepa...

• The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. 3 From the home screen, touch Fax . 4 Enter the fax number or a shortcut. Note: To add recipients, touch Next number , and then enter the recipient's...

4 Specify the time the fax will be transmitted, and then touch . The time is increased or decreased in 30 ‑ minute increments. 5 Touch Fax It . Note: The document is scanned and then faxed at the scheduled time. Creating shortcuts Creating a fax destination shortcut using the Embedded Web Server Ass...

Customizing fax settings Changing the fax resolution 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazineclippings) into the ADF tray....

Blocking junk faxes 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbersseparated by periods, such as 123.123.123.123. • If you are using a proxy server, then t...

Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbersseparated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Fax Settings > Analog ...

Scanning You can use the printer to send a file to an FTP address. You can type the e ‑ mail address, use a shortcut number, or use the address book. You can also use the Multi-send or MyShortcut application from the printer home screen. Formore information, see the "Activating the home screen a...

Creating an FTP shortcut using the printer control panel 1 From the home screen, navigate to: FTP > FTP > type the FTP address > > type a name for the shortcut > Done 2 Verify that the shortcut name and number are correct, and then touch OK . Notes: • If the name or number is incorrec...

• The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. 3 From the home screen, navigate to: FTP > FTP > > type the name of the recipient > Search 4 Touch the name of the recipient. Note: To se...

4 Select a location on your computer where you want to save the scan image. 5 Type a scan name, and then a user name. Note: The scan name is the name that appears in the Scan Profile list on the display. 6 Click Submit . Note: Clicking Submit automatically assigns a shortcut number. You can use this...

3 Select your printer from the list. Note: To identify your printer, print a network setup page, and then look for “Fully Qualified Domain Name” in the TCP/IP section. 4 Click Next > Close . 5 Depending on your device, do either of the following:. • Press and hold the printer you want to configur...

Using the ScanBack Utility You can use the Lexmark ScanBack TM Utility instead of the Embedded Web Server to create scan ‑ to ‑ computer profiles. The ScanBack Utility can be downloaded from the Lexmark Web site at http:\\support.lexmark.com . 1 Set up your scan ‑ to ‑ computer profile: a Launch the...

Understanding the printer menus • “Menus list” on page 140 • “Paper menu” on page 141 • “Reports Menu” on page 151 • “Network/Ports menu” on page 152 • “Security menu” on page 161 • “Settings menu” on page 166 • “Help menu” on page 210 Menus list Paper Menu Reports Network/Ports Security Default Sou...

Settings Help Manage Shortcuts Option Card Menu 3 General Settings Copy Settings Fax Settings E ‑ mail Settings FTP Settings Flash Drive Menu Print Settings Print All Guides Copy Guide E ‑ mail Guide Fax Guide FTP Guide Print Defects Guide Information Guide Supplies Guide Fax Shortcuts E-mail Shortc...

Configure MP menu Use To Configure MP CassetteManualFirst Determine when the printer selects paper from the multipurpose feeder. Notes: • Cassette is the factory default setting. Cassette configures themultipurpose feeder as the automatic paper source. • Manual sets the multipurpose feeder only for ...

Paper Weight menu Use To Plain Weight LightNormalHeavy Specify the relative weight of the plain paper loaded. Note: Normal is the factory default setting. Card Stock Weight LightNormalHeavy Specify the relative weight of the card stock loaded. Note: Normal is the factory default setting. Transparenc...

Use To Colored Weight LightNormalHeavy Specify the relative weight of the colored paper loaded. Note: Normal is the factory default setting. Light Weight Light Specify that the relative weight of the paper loaded is light. Heavy Weight Heavy Specify the relative weight of the paper loaded is heavy. ...

Use To Preprinted Loading DuplexOff Determine and set two-sided printing for all print jobs that specifyPreprinted as the paper type. Colored Loading DuplexOff Determine and set two-sided printing for all print jobs that specifyColored as the paper type. Light Loading DuplexOff Determine and set two...

Use To Recycled PaperCard StockTransparencyRough/CottonLabelsEnvelope Specify a paper type when Recycled is selected in other menus. Notes: • Paper is the factory default setting. • The custom media type must be supported by the selected tray or multipurpose feeder to print from that source. Custom ...

Use To Portrait Width 3–8.5 inches76–216 mm Set the portrait width. Notes: • If the width exceeds the maximum, then the printer uses themaximum width allowed. • 8.5 inches is the US factory default setting. You can increase thewidth in 0.01 ‑ inch increments. • 216 mm is the international factory de...

Use To Shortcut List Print a report containing information about configured shortcuts. Fax Job Log Print a report containing information about the last 200 completed faxes. Note: This menu item appears only when Enable Job Log is set to On in the Fax Settings menu. Fax Call Log Print a report contai...

Use To Standard Network Setup or Network [x] Setup ReportsNetwork CardTCP/IPIPv6WirelessAppleTalk Display and set the printer network settings. Note: The Wireless menu appears only when the printer is connected to a wireless network. Reports menu To access the menu, navigate to either of the followi...

Use To Backup DNS Server Address View or change the backup DNS server addresses. Backup DNS Server Address 2 Backup DNS Server Address 3 Enable HTTPS YesNo View or change the current HTTPS setting. Note: Yes is the factory default setting. IPv6 menu To access the menu, navigate to either of the foll...

Use To Wi ‑ Fi Protected Setup (WPS) Start Push Button MethodStart PIN Method Establish a wireless network connection and enable network security. Notes: • Start Push Button Method connects the printer to a wirelessnetwork when buttons on both the printer and the access point(wireless router) are pr...

Use To View Address Show the assigned AppleTalk address. Note: The AppleTalk address can be changed only from the Embedded Web Server. Set Zone [list of zones available on the network] Provide a list of AppleTalk zones available on the network. Note: The default zone for the network is the factory d...

SMTP Setup menu Use To Primary SMTP Gateway Specify SMTP server gateway and port information. Note: 25 is the default SMTP gateway port. Primary SMTP Gateway Port Secondary SMTP Gateway Secondary SMTP Gateway Port SMTP Timeout 5–30 Specify the amount of time in seconds before the server stops trying...

Security menu Edit Security Setups menu Note: This menu appears only in select touch ‑ screen printer models. Use To Edit Backup Password Use Backup Password • Off • On Password Create a backup password. Notes: • Off is the factory default setting for “Use Backup Password.” • This menu appears only ...

Miscellaneous Security Settings menu Use To Login Restrictions Login failuresFailure time frameLockout timePanel Login TimeoutRemote Login Timeout Limit the number and time frames of failed login attempts from the printer controlpanel before all users are locked out. Notes: • “Login failures” specif...

Confidential Print menu Use To Max Invalid PIN Off2–10 Set a limit on the number of times an invalid PIN can be entered. Notes: • This menu item appears only when a formatted, working printer hard disk is installed. • When the limit is reached, the print jobs for that user name and PIN are deleted. ...

Use To Automatic Method Single passMultiple pass Mark all disk space used by a previous print job. This method does not permit the filesystem to reuse this space until it has been cleared. Notes: • “Single pass” is the factory default setting. • Only automatic wiping enables users to activate disk w...

Settings menu General Settings menu Use To Display Language EnglishFrancaisDeutschItalianoEspanolDanskNorskNederlandsSvenskaPortugueseSuomiRussianPolskiGreekMagyarTurkceCeskySimplified ChineseTraditional ChineseKoreanJapanese Set the language of the text appearing on the printer display. Note: Not a...

Use To Factory Defaults Do Not RestoreRestore Now Return the printer settings to the factory default settings. Notes: • Do Not Restore is the factory default setting. This keeps theuser ‑ defined settings. • Restore Now returns all printer settings to the factorydefault settings except Network/Ports...

Use To Contrast 0–5Best for content Specify the contrast used for the copy job. Note: “Best for content” is the factory default setting. Mirror Image OffOn Create a mirror image of the original document. Note: Off is the factory default setting. Negative Image OffOn Create a negative image of the or...

Use To Fax Cover Page Fax Cover Page Off by defaultOn by defaultNever useAlways use Include to Field OnOff Include from Field OnOff FromInclude Message Field OnOff MessageInclude Logo OnOff Include Footer [x] OnOffFooter [x] Configure the fax cover page. Note: “Off by default” is the factory default...

Use To Mirror Image OffOn Create a mirror image of the original document. Note: Off is the factory default setting. Negative Image OffOn Create a negative image of the original document. Note: Off is the factory default setting. Shadow Detail ‑ 4 to 4 Adjust the amount of shadow detail visible. Note...

Use To Staple Off1 staple Specify whether prints are stapled. Note: Off is the factory default setting. Fax Log Settings Use To Transmission Log Print logDo not print logPrint only for error Enable printing of a transmission log after each fax job. Note: Print log is the factory default setting. Rec...

Speaker Settings Use To Speaker Mode Always OffOn until ConnectedAlways On Specify the mode of the speaker. Notes: • On until Connected is the factory default setting. A sound is issued until the faxconnection is made. • Always On turns the speaker on. • Always Off turns the speaker off. Speaker Vol...

FTP Settings menu Use To Format PDF (.pdf)Secure PDF (.pdf)TIFF (.tif)JPEG (.jpg)XPS (.xps) Specify the format of the file for FTP sending. Note: PDF (.pdf) is the factory default setting. PDF Version 1.2–1.6A–1a Set the version level of the PDF file for FTP sending. Note: 1.5 is the factory default...

Use To Shadow Detail ‑ 4 to 4 Adjust the amount of shadow detail visible on a scanned image. Note: 0 is the factory default setting. Fix Scan Skew AutoOffOn Correct slight skew in the scanned image. Notes: • Off is the factory default setting. • This menu item is supported only in select printer mod...

Use To Mirror Image OffOn Create a mirror image of the original document. Note: Off is the factory default setting. Negative Image OffOn Create a negative image of the original document. Note: Off is the factory default setting. Shadow Detail ‑ 4 to 4 Adjust the amount of shadow detail visible on a ...

Print Settings Setup menu Use To Printer Language PCL EmulationPS Emulation Set the printer language. Notes: • PCL Emulation is the factory default setting. • Setting a printer language as the default does not prevent asoftware program from sending print jobs that use anotherprinter language. Job Wa...

Use To Resource Save OnOff Specify how the printer handles temporary downloads, such asfonts and macros stored in the RAM, when the printer receives ajob that requires more memory than is available. Notes: • Off is the factory default setting. This sets the printer toretain the downloads only until ...

Use To Staple Job OffOn Specify whether printed output is stapled. Notes: • Off is the factory default setting. • This menu item appears only when a supported staple finisher is installed. Run Stapler Test Print a report that confirms that the staple finisher is functioning properly. Note: This menu...

Use To Brightness ‑ 6 to 6 Adjust the printed output either by lightening or darkening it. You can conserve tonerby lightening the output. Note: 0 is the factory default setting. Contrast 0–5 Adjust the contrast of printed objects. Note: 0 is the factory default setting. Job Accounting menu Note: Th...

Use To Disk Full Action NoneE ‑ mail & Delete Current Log E ‑ mail & Delete Oldest Log Post & Delete Current LogPost & Delete Oldest LogDelete Current LogDelete Oldest LogDelete All LogsDelete All But Current Determine and set how the printer responds when disk usage reaches the maxi...

Use To Lock PS Startup Mode OnOff Disable the SysStart file. Note: Off is the factory default setting. Font Priority ResidentFlash/Disk Establish the font search order. Notes: • Resident is the factory default setting. • This menu item is available only when a formatted flash memory optioncard or pr...

HTML menu Use To Font Name Albertus MTAntique OliveApple ChanceryArial MTAvant GardeBodoniBookmanChicagoClarendonCooper BlackCopperplateCoronetCourierEurostileGaramondGenevaGill SansGoudyHelveticaHoefler TextIntl CG TimesIntl CourierIntl Univers Joanna MTLetter GothicLubalin GraphMarigoldMonaLisa Re...

Use To Margin Size 8–255 mm Set the page margin for HTML documents. Notes: • 19 mm is the factory default setting. • Margin size can be increased in 1 ‑ mm increments. Backgrounds Do Not PrintPrint Specify whether to print backgrounds on HTML documents. Note: Print is the factory default setting. Im...

Saving money and the environment Lexmark is committed to environmental sustainability and is continually improving its printers to reduce their impacton the environment. We design with the environment in mind, engineer our packaging to reduce materials, and providecollection and recycling programs. ...

Saving energy Using Eco ‑ Mode 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbersseparated by periods, such as 123.123.123.123. • If you are using a proxy ser...

Use To On Reduce printer noise. Notes: • Print jobs are processed at a reduced speed. • Printer engine motors do not start until a documentis ready to print. There will be a short delay beforethe first page is printed. Off Use factory default settings. Note: This setting supports the performance spe...

Using Hibernate Mode Hibernate is an ultra ‑ low power operating mode. When operating in Hibernate mode, the printer is essentially off, and all other systems and devices are powered down safely. Note: The Hibernate and Sleep modes can be scheduled. Using the Embedded Web Server 1 Open a Web browser...

Using the printer control panel 1 From the printer control panel, navigate to: > Settings > General Settings > Timeouts > Hibernate Timeout 2 Select the amount of time the printer waits after a print job is processed before it enters Hibernate mode. 3 Touch . Using Schedule Power Modes S...

Using the printer control panel 1 From the home screen, navigate to: > Settings > General Settings > Screen Brightness 2 In the Screen Brightness field, enter the brightness percentage you want for the display. 3 Touch . Recycling Lexmark provides collection programs and environmentally pro...

Securing the printer Statement of Volatility Your printer contains various types of memory that can store device and network settings, and user data. Types of memory Description Volatile memory Your printer uses standard Random Access Memory (RAM) to temporarily buffer user data during simple print ...

The printer will perform a power ‑ on reset, and then return to normal operating mode. Configuring printer hard disk encryption Enable the hard disk encryption to prevent loss of sensitive data in the event the printer or its hard disk is stolen. Note: Some printer models may not have a printer hard...

• A status bar will indicate the progress of the disk wiping task. After the disk has been encrypted, the printerwill return to the Enable/Disable screen. 5 Touch Back > Exit Config Menu . The printer will perform a power ‑ on reset, and then return to normal operating mode. Finding printer secur...

Maintaining the printer Warning—Potential Damage: Failure to maintain optimum printer performance, or to replace parts and supplies, may cause damage to your printer. Cleaning the printer parts Cleaning the printer Note: You may need to perform this task after every few months. Warning—Potential Dam...

Cleaning the scanner glass Clean the scanner glass if you encounter print quality problems, such as streaks on copied or scanned images. 1 Slightly dampen a soft, lint-free cloth or paper towel with water. 2 Open the scanner cover. 3 Clean all the areas shown, and then let them dry. 1 2 3 4 1 White ...

Checking the status of parts and supplies Checking the status of parts and supplies on the printer control panel From the home screen, touch Status/Supplies > View Supplies . Checking the status of parts and supplies from the Embedded Web Server Note: Make sure the computer and the printer are co...

Ordering an imaging unit Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to exhaustion oftoner from toner cartridge. For more information on replacing the imaging unit, see the instruction sheet that came with the supply. Lexmark Return Program im...

Estimated number of remaining pages The estimated number of remaining pages is based on the recent printing history of the printer. Its accuracy mayvary significantly and is dependent on many factors, such as actual document content, print quality settings, andother printer settings. The accuracy of...

Replacing the imaging unit 1 Press the button on the right side of the printer, and then open the front door. 2 1 2 Pull the toner cartridge out using the handle. 3 Lift the green handle, and then pull the imaging unit out of the printer. Maintaining the printer 229

7 Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side railsinside the printer. 8 Close the front door. Replacing the staple cartridge 1 Open the stapler door. Maintaining the printer 231

6 Push the staple cartridge into the finisher until it clicks into place. 7 Replace the spare staple case for future use. 8 Close the stapler door. Moving the printer Before moving the printer CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained...

• If an optional tray is installed, then remove it from the printer. To remove the optional tray, slide the latch on theright side of the tray toward the front of the tray until it clicks into place. • Use the handholds located on both sides of the printer to lift it. • Make sure your fingers are no...

Managing the printer Finding advanced networking and administrator information This chapter covers basic administrative support tasks using the Embedded Web Server. For more advanced systemsupport tasks, see the Networking Guide on the Documentation CD or the Embedded Web Server Administrator's Guid...

Restoring factory default settings If you want to keep a list of the current menu settings for reference, then print a menu settings page before restoringthe factory default settings. For more information, see “Printing a menu settings page” on page 59. If you want a more comprehensive method of res...

Clearing jams Jam error messages appear on the printer display and include the area of the printer where the jam occurred. Whenthere is more than one jam, the number of jammed pages is displayed. Avoiding jams Load paper properly • Make sure paper lies flat in the tray. Correct loading of paper Inco...

• Make sure the guides in the tray or the multipurpose feeder are properly positioned and are not pressing tightlyagainst the paper or envelopes. • Push the tray firmly into the printer after loading paper. Use recommended paper • Use only recommended paper or specialty media. • Do not load wrinkled...

[x]-page jam, remove all pages from the output bin. Leavepaper in bin. [45y.xx] Paper jam in the finisher bin 1 Empty the standard bin. 2 Move the tamper arms to the sides. 3 Remove all jammed pages from inside the access areas. Note: Make sure all paper fragments are removed. Clearing jams 250

4 If necessary, touch Done from the printer control panel to clear the message and continue printing. Paper jam in the finisher rear door 1 Open the finisher rear door. 2 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. Clearin...

5 Close the finisher rear door. 6 If necessary, touch Done from the printer control panel to clear the message and continue printing. Staple jam in the finisher 1 Open the staple access door. 2 Pull out the staple cartridge from the finisher. 1 2 Clearing jams 253

Troubleshooting • “Understanding the printer messages” on page 259 • “Solving printer problems” on page 273 • “Solving print problems” on page 280 • “Solving copy problems” on page 305 • “Solving fax problems” on page 309 • “Solving scanner problems” on page 315 • “Solving home screen applications p...

Configuration change, some held jobs were not restored [57] Held jobs are invalidated because of the following possible changes in the printer: • The printer firmware has been updated. • The tray for the print job has been removed. • The print job is sent from a flash drive that is no longer attache...

Insufficient memory to support Resource Save feature [35] Install additional printer memory or touch Continue to disable Resource Save, clear the message, and continue printing. Load [paper source] with [custom type name] [paper orientation] Try one or more of the following: • Load the tray or feede...

Non ‑ Lexmark [supply type], see User’s Guide [33.xy] Note: The supply type can be a toner cartridge or the imaging unit. The printer has detected a non ‑ Lexmark supply or part installed in the printer. Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use o...

Printer had to restart. Last job may be incomplete. From the printer control panel, touch Continue to clear the message and continue printing. For more information, visit http://support.lexmark.com or contact customer support. Remove defective disk [61] Remove and replace the defective printer hard ...

Reinstall missing or unresponsive cartridge [31.xy] Try one or more of the following: • Check if the toner cartridge is missing. If missing, install the toner cartridge. For information on installing the cartridge, see the “Replacing supplies” section of the User’s Guide . • If the toner cartridge i...

Standard USB port disabled [56] Try one or more of the following: • From the printer control panel, touch Continue to clear the message. • Enable the USB port. From the printer control panel, navigate to: Network/Ports > USB Buffer > Auto Note: The printer discards any data received through th...

Unsupported option in slot [x] [55] 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the unsupported option card from the printer controller board, and then replace it with a supported card. 4 Connect the power cord to a properly grounded electrical outlet. 5 Turn...

Action Yes No Step 10 Check if you have selected the correct port settings in the printer driver. Are the port settings correct? Go to step 11. Use correct printerdriver settings. Step 11 Check the installed printer driver. Is the correct printer driver installed? Go to step 12. Install the correctp...

Option problems Cannot detect internal option Action Yes No Step 1 Turn off the printer, then wait for about 10 seconds, and then turn on theprinter. Does the internal option operate correctly? The problem is solved. Go to step 2. Step 2 Check if the internal option is properly installed in the cont...

Tray problems Action Yes No Step 1 a Pull out the tray, and then do one or more of the following: • Check for paper jams or misfeeds. • Check if the paper size indicators on the paper guides are alignedwith the paper size indicators on the tray. • If you are printing on custom ‑ size paper, then mak...

Cannot detect memory card Action Yes No Make sure the memory card is installed. a Install the memory card. For more information, see “Installing amemory card” on page 31. Note: Check if the memory card is securely connected to the printer controller board. b Print a menu settings page, and then chec...

Action Yes No Step 2 Check the cable and the USB or parallel interface card connection. Use the correct cable, and then make sure it is securely connected tothe USB or parallel interface card. Does the USB or parallel interface card operate correctly? The problem is solved. Contact customer support ...

Paper jam message remains after jam is cleared Action Yes No Check the entire paper path for jammed paper. a Remove any jammed paper. b From the printer control panel, touch Continue to clear the message. Does the paper jam message remain? Contact customer support . The problem is solved. Jammed pag...

Error message about reading the flash drive appears Action Yes No Step 1 Check if the flash drive is inserted into the front USB port. Note: The flash drive will not work if it is inserted into the rear USB port. Is the flash drive inserted into the front USB port? Go to step 2. Insert the flash dri...

Confidential and other held jobs do not print Note: Confidential, Verify, Reserve, and Repeat print jobs may be deleted if the printer requires extra memory to process additional held jobs. Action Yes No Step 1 Open the held jobs folder on the printer display, and then verify that yourprint job is l...

Print job takes longer than expected Action Yes No Step 1 Change the environmental settings of the printer. a From the printer control panel, navigate to: > Settings > General Settings b Select Eco ‑ Mode or Quiet Mode , and then select Off . Note: Disabling Eco-Mode or Quiet Mode may increase...

Job prints from the wrong tray or on the wrong paper Action Yes No Step 1 a Check if you are printing on paper that is supported by the tray. b Resend the print job. Did the job print from the correct tray or on the correct paper? The problem is solved. Go to step 2. Step 2 a From the Paper menu on ...

Tray linking does not work Notes: • The trays can detect paper length. • The multipurpose feeder does not automatically detect the paper size. You must set the size from the PaperSize/Type menu. Action Yes No Step 1 a Open the trays, and then check if they contain paper of the same sizeand type. • C...

Action Yes No Step 3 Reduce the complexity of the print job by eliminating the number and sizeof fonts, the number and complexity of images, and the number of pagesin the job. Did the job print and collate correctly? The problem is solved. Contact customer support . Unexpected page breaks occur Acti...

Action Yes No Step 2 a Use a font that is supported by the printer or install the font that youwant to use on your computer. For more information, contact yoursystem support person. b Resend the print job. Do prints still contain characters that have jagged or uneven edges? Contact customer support ...

Action Yes No Step 3 Replace the imaging unit, and then resend the print job. Is the printer still printing blank pages? Contact customer support . The problem is solved. Clipped pages or images Leading edge Trailing edge ABCDEABCDEABCDE Action Yes No Step 1 a Move the width and length guides in the...

Action Yes No Step 4 a Reinstall the imaging unit. 1 Remove the toner cartridge. 2 Remove the imaging unit. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure tolight may cause print quality problems. 3 Install the imaging unit, and t...

Action Yes No Step 1 Load paper with the correct paper type and weight in the tray. Is paper with the correct paper type and weight loaded in the tray? Go to step 2. Load paper with thecorrect paper type andweight in the tray. Step 2 From the printer control panel, set the paper type and weight in t...

Action Yes No Step 2 Adjust the toner darkness to a lighter setting. a From the Quality Menu, select a lower value to reduce toner density. • 4 is the factory default setting. • If Print Mode is set to Black Only, then a setting of 5 increases tonerdensity and darkness for all print jobs. b Resend t...

Action Yes No Step 2 From the printer control panel, set the paper size in the Paper menu tomatch the paper loaded in the tray. Does the paper size match the paper loaded in the tray? Go to step 3. Do one or more of thefollowing: • Specify the papersize from the traysettings to matchthe paper loaded...

Action Yes No Step 5 a Load paper from a fresh package. Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it. b Resend the print job. Is the paper still curled? Contact customer support . The problem is solved. Print irregularities ) ) ABCDE ABCDE A...

Action Yes No Step 5 a Load paper from a fresh package. Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it. b Resend the print job. Do print irregularities still appear? Go to step 6. The problem is solved. Step 6 Replace the imaging unit, and the...

Print is too dark Action Yes No Step 1 a From the Quality menu on the printer control panel, reduce the tonerdarkness. Note: 8 is the factory default setting. b Resend the print job. Is the print still too dark? Go to step 2. The problem is solved. Step 2 a From the printer control panel, set the pa...

Action Yes No Step 5 a Load paper from a fresh package. Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it. b Resend the print job. Is the print still too dark? Go to step 6. The problem is solved. Step 6 Replace the imaging unit, and then resend ...

Action Yes No Step 4 Make sure that the paper has no texture or rough finishes. Are you printing on textured or rough paper? From the printercontrol panel, changethe texture settings inthe Paper Texturemenu to match thepaper you are printingon. Go to step 5. Step 5 a Load paper from a fresh package....

Action Yes No Step 1 a Move the width and length guides in the tray to the correct positionsfor the size of the paper loaded. b Resend the print job. Is the print still skewed? Go to step 2. The problem is solved. Step 2 a Check if you are printing on a paper that is supported by the tray. b Resend ...

Transparency print quality is poor Action Yes No Step 1 From the printer control panel, set the paper type in the Paper menu tomatch the paper loaded in the tray. Is the paper type for the tray set to Transparency? Go to step 2. Set the paper type toTransparency. Step 2 a Check if you are using a re...

Action Yes No Step 4 a Reinstall the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure tolight may cause print quality problems. 2 Install the imaging unit, and t...

Action Yes No Step 3 a Load paper from a fresh package. Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it. b Resend the print job. Do streaked vertical lines appear on prints? Go to step 4. The problem is solved. Step 4 a Reinstall the imaging un...

Action Yes No Step 3 a Redistribute the toner in the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure tolight may cause print qu...

Action Yes No Step 4 a Redistribute the toner in the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure tolight may cause print qu...

Action Yes No Step 2 Replace the imaging unit, and then resend the print job. Does fog or shading appear on prints? Contact customer support at http://support.lexmark.com or your service representative. The problem is solved. Toner rubs off Leading edge Trailing edge ABC DEF Action Yes No Step 1 Fro...

• “Scanner unit does not close” on page 306 • “Poor copy quality” on page 307 • “Partial document or photo copies” on page 308 Copier does not respond Action Yes No Step 1 Check if an error or status message appears on the display. Does an error or status message appear? Clear the error or statusmes...

Poor copy quality Action Yes No Step 1 Check if an error or status message appears on the display. Does an error or status message appear? Clear the error or statusmessage. Go to step 2. Step 2 Check the quality of the original document. Is the quality of the original document satisfactory? Go to st...

Action Yes No Step 8 Check for patterns on print. a From the Copy screen, navigate to: Advanced Options > Advanced Imaging > Sharpness > select a lower setting b On the Copy screen, make sure no scaling is being selected. Do patterns appear on prints? Go to step 9. The problem is solved. St...

Action Yes No Step 2 Check if the paper size setting matches the size of the paper loaded in thetray. From the Paper menu on the printer control panel, check the PaperSize setting. Does the paper size setting match the size of the paper loaded in the tray. Go to step 3. Change the paper sizesetting ...

Caller ID is not shown Action Yes No Contact your telephone company to check if your telephone line issubscribed to the caller ID service. Notes: • If your region supports multiple caller ID patterns, then you mayhave to change the default setting. There are two settingsavailable: FSK (pattern 1) an...

Action Yes No Step 8 Temporarily disconnect other equipment (such as answering machines,computers with modems, or telephone line splitters) between the printerand the telephone line, and then try sending or receiving a fax. Can you send or receive a fax? The problem is solved. Go to step 9. Step 9 a...

Action Yes No Step 2 Check the ring count delay settings. a Open a Web browser, and then type the printer IP address in theaddress field. Notes: • View the printer IP address on the printer home screen. The IPaddress appears as four sets of numbers separated by periods,such as 123.123.123.123. • If ...

Action Yes No Step 3 Set up the shortcut number properly. • Check if the shortcut number has been set for the telephone numberthat you want to dial. • Dial the telephone number manually. Can you send faxes? The problem is solved. Contact customer support . Received fax has poor print quality Action ...

Action Yes No Step 3 Replace the toner cartridge. When Cartridge low [88.xy] appears, replace the cartridge, and then resend the fax. Is the fax print quality satisfactory? The problem is solved. Contact customer support . Solving scanner problems • “The scanner does not respond” on page 315 • “Scan...

Action Yes No Step 5 Check if the printer is plugged into any surge protectors, uninterruptiblepower supplies, or extension cords. Is the printer plugged into any surge protectors, uninterruptible powersupplies, or extension cords? Connect the printerpower cord directly toa properly groundedelectric...

Action Yes No Step 5 From the Flash Drive menu, reduce the scan resolution settings, and thenresend the scan job. Does the job scan? The problem is solved. Go to step 6. Step 6 Check the scan settings. From the Scan screen, make sure the Content Type and Content Sourcesettings are correct for the do...

Poor scanned image quality Action Yes No Step 1 Check if an error message appears on the display. Is there an error message on the printer display? Clear the errormessage. Go to step 2. Step 2 Check the quality of the original document. Is the quality of the original document satisfactory? Go to ste...

Partial document or photo scans Action Yes No Check the placement of the document or photo. Make sure the document or photo is loaded facedown on the scannerglass in the upper left corner. Is the document or photo loaded correctly? Contact customer support . Load the document orphoto facedown on the...

Solving home screen applications problems An application error has occurred Action Yes No Step 1 Check the system log for relevant details. a Open a Web browser, and then type the printer IP address in theaddress field. If you do not know the IP address of the printer, then you can: • View the IP ad...

Action Yes No Step 3 Check if the network connection is working. Is the network connection working? Go to step 4. Contact your systemsupport person. Step 4 Make sure the cable connections to the printer and print server are secure. For more information, see the setup documentation that came withthe ...

Notices Product information Product name: Lexmark XM3150 Machine type: 7016 Model(s): 679 Edition notice September 2012 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT ...

Trademarks Lexmark, Lexmark with diamond design, and MarkVision are trademarks of Lexmark International, Inc., registered inthe United States and/or other countries. Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries. PCL® is a registered trademark of the H...

Noise emission levels The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296. Note: Some modes may not apply to your product. 1-meter average sound pressure, dBA Printing 55 dBA Scanning 45 dBA Copying 56 dBA Ready N/A dBA Values are subject to cha...

DANGER - Invisible laser radiation when cartridges are removed and interlock defeated. Avoid exposure to laser beam.PERIGO - Radiação a laser invisível será liberada se os cartuchos forem removidos e o lacre rompido. Evite a exposição aos feixes de laser. Opasnost - Nevidljivo lasersko zra č enje ka...

Sleep Mode This product is designed with an energy-saving mode called Sleep Mode . The Sleep Mode saves energy by lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged after this productis not used for a specified period of time, called the Sleep M...

If you experience trouble with this equipment, for repair or warranty information, contact Lexmark International, Inc.at www.lexmark.com or your Lexmark representative. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment unti...

Les compagnies de téléphone constatent que les surtensions électriques, en particulier celles dues à la foudre,entraînent d'importants dégâts sur les terminaux privés connectés à des sources d’alimentation CA. Il s’agit-là d’unproblème majeur d’échelle nationale. En conséquence, il vous est recomman...

Verwendung dieses Produkts in der Schweiz Für dieses Produkt muss ein schweizerischer Billing Tone Filter zur Zählzeichenübertragung (Lexmark Teilenummer80D1877) für jede Leitung installiert werden, über die in der Schweiz Zeitsteuertakte übertragen werden. DieVerwendung des Filters ist obligatorisc...

Polski Niniejszym Lexmark International, Inc. o ś wiadcza, ż e niniejszy produkt jest zgodny z zasadniczymi wymogami oraz pozosta ł ymi stosownymi postanowieniami Dyrektywy 1999/5/EC. Português A Lexmark International Inc. declara que este este produto está conforme com os requisitos essenciais e ou...

To obtain warranty service you may be required to present proof of original purchase. You may be required to deliveryour product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location.You are responsible for loss of, or damage to, a product in transit...

Limitation of liability Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance ornonperformance of Lexmark or a Remarketer for this product under this limited warranty, you may recover actualdamages up to the limit set forth in the following ...

Index Numerics 250 ‑ sheet tray installing 45 550 ‑ sheet tray installing 45 Symbols [x]-page jam, remove all pages fromthe finisher’s accumulator. Leavepaper in bin. [45y.xx] 255[x] ‑ page jam, clear manual feeder. [25y.xx] 247[x] ‑ page jam, clear standard bin. [20y.xx] 241[x] ‑ page jam, open aut...