Lexmark X642 - Manual
Lexmark X642 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Closing the multipurpose feeder; Copying; Making a copy; Copying using the ADF
- Page 4 – Faxing; Sending a fax; Printing; Printing a document
- Page 5 – Maintaining the printer; Cleaning the scanner glass
Lexmark™ X642
Quick Reference
Loading paper and
specialty media
Loading standard trays and
optional trays
Note:
Do not remove a tray when a job is
printing or when the control panel
green indicator light is blinking.
Doing so may cause a jam.
1
Remove the tray from the MFP, and place it on
a flat, level surface.
2
Squeeze the side guide tab, and slide the guide
to the outer edge of the tray.
3
Squeeze the rear guide tab, and slide the guide
to the correct position for the size media you are
loading.
4
Flex the sheets back and forth to loosen them,
then fan them. Do not fold or crease the print
media. Straighten the edges on a level surface.
5
Place the print media in the tray:
•
Print side facedown for single-sided printing
•
Print side faceup for duplex printing
Note:
Do not fill paper above the load line.
Overfilling the tray may cause jams.
6
Squeeze the side guide tab, and slide the guide
toward the inside of the tray until it lightly rests
against the edge of the media.
7
Insert the tray into the MFP.
Setting the Paper Type and Paper
Size
1
Make sure the MFP is on.
2
Press
Menu
on the control panel.
3
Touch
Paper Menu
.
4
Touch
Paper Size
.
5
Touch the left or right arrow to change the size
for the desired tray.
6
Touch
Submit
.
7
Touch
Paper Type
.
8
Touch the left or right arrow to change the
media type for the desired tray.
9
Touch
Submit
.
10
Touch the
home
icon.
Loading the multipurpose feeder
1
Push the release latch, and lower the
multipurpose feeder.
2
Pull the tray extension out.
Simplex
Duplex
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 Slide the width guide to the far right. 4 Flex the sheets or envelopes back and forth to loosen them, then fan them. Do not fold or crease the print media. Straighten the edges on a level surface. 5 Load the media in the tray. • Load paper or transparencies with the left edge of the stack against ...
Faxing Sending a fax 1 Place your original document in the automatic document feeder faceup, short-edge first. 2 Adjust the paper guides. 3 Touch Fax on the home screen. 4 Enter the fax number using the numbers on the touch screen or keypad. Add recipients by touching next and then entering the reci...
Maintaining the printer Cleaning the scanner glass 1 Open the document cover. 2 Dampen a clean, lint-free cloth or cotton swab with isopropyl alcohol (95%). 3 Wipe the flatbed and backing material by moving the cloth or swab from side to side. 4 Close the document cover. Backing material Scanner gla...
