Lexmark 47B1001 - Manuals

3 Verify that the MFP is in Configuration mode by locating the Exit Config Menu icon in the lower right corner of the touch screen. 4 Scroll through the configuration menus to locate the Disk Encryption menu selection. 5 Touch Disk Encryption > Enable . Warning: Enabling disk encryption will eras...

Installing the minimum configuration You can achieve an evaluated configuration on a non-networked (standalone) device in just a few steps. For thisconfiguration, all tasks are performed at the device, using the touch screen. Configuring the device Configuration checklist This checklist outlines the...

3 Retype the password, and then touch Done to save the new password and return to the Edit Backup Password screen. 4 Set Use Backup Password to On . 5 Touch Submit . Creating user accounts Creating internal (device) accounts for use with the evaluated configuration involves not only assigning a user...

Group name Type of user group would be selected for Authenticated_Users • Administrators permitted to access all device functions • Administrators permitted to use device functions and access the Reportsmenu • Administrators permitted to use device functions and access theSecurity menu • Non ‑ admin...

3 Type a unique name to identify the template. Use a descriptive name, such as ”Administrator_Only” or“Authenticated_Users,” and then touch Done . 4 On the Authentication Setup screen, select the internal accounts building block, and then touch Done . 5 On the Authorization Setup screen, select the ...

Access control Level of protection Held Jobs Access Disabled Use Profiles Authenticated users only Change Language from Home Screen Authenticated users only Cancel Jobs at the Device Administrator access only PictBridge Printing Not applicable—USB port disabled Solution 1 Authenticated users only No...

Administering the device This chapter describes how to configure additional settings and functions that may be available on your device. Using the Embedded Web Server Many settings can be configured using either the Embedded Web Server (EWS) or the touch screen. Accessing the EWS 1 Type the device I...

The contents of the file should be in the following format: -----BEGIN CERTIFICATE----- MIIE1jCCA76gAwIBAgIQY6sV0KL3tIhBtlr4gHG85zANBgkqhkiG9w0BAQUFADBs … l3DTbPe0mnIbTq0iWqKEaVne1vvaDt52iSpEQyevwgUcHD16rFy+sOnCaQ== -----END CERTIFICATE----- • Download Signing Request —Download or save the signing r...

Disabling the AppleTalk protocol IP is the only network protocol permitted under this evaluation. The AppleTalk protocol must be disabled. Using the EWS Note: For information about accessing the EWS, see “Using the Embedded Web Server” on page 15. 1 From the Embedded Web Server, click Settings > ...

3 Click Submit . Other settings and functions Network Time Protocol Use Network Time Protocol (NTP) to automatically sync MFP date and time settings with a trusted clock so that Kerberosrequests and audit log events will be accurately time ‑ stamped. Note: If your network uses DHCP, then verify that...

3 Under Simple Kerberos Setup, for KDC Address, type the IP address or host name of the KDC (Key DistributionCenter) IP. 4 For KDC Port, type the number of the port used by the Kerberos server. 5 For Realm, type the realm used by the Kerberos server. Note: The Realm entry must be typed in all upperc...

6 If you want to receive responses to messages sent from the MFP (in case of failed or bounced messages), thenprovide a Reply Address. 7 Set Use SSL to Disabled , Negotiate or Required to specify whether e-mail will be sent using an encrypted link. 8 If the SMTP server requires user credentials, the...

Setting up a fax storage location (optional) 1 Turn off the MFP using the power switch. 2 Simultaneously press and hold the 2 and 6 keys on the numeric keypad while turning the MFP back on. It takes approximately a minute to boot into the Configuration menu. Once the MFP is ready, the touch screen d...

5 Click Settings > Security > Security Setup > Internal Accounts . 6 Click Add an Internal Account , and then provide the information needed for each account: • Account Name —Type the user's account name (example: “Jack Smith”). • User ID —Type an ID for the account (example: “jsmith”). • P...

Configuring Common Access Card access A set of Public Key Infrastructure (PKI) embedded applications comes installed on the MFP. These applications provide for additional functionality, including the use of Smart Cards such as the Department of Defense Common Access Card(CAC). For more information o...

Creating security templates using the EWS A security template is assigned to each device function to control which users are permitted to access that function.At a minimum, you must create two security templates: one for "Administrator_Only" and one for"Authenticated_Users." If there...

Notes: • Clicking Delete List from the Manage Security Templates screen will delete all security templates on the MFP, regardless of which one is selected. To delete an individual security template, select it from the list, and thenclick Delete Entry . • You can delete a security template only if it...

• Verify Job Expiration —This can be set to Off , Same as Confidential Print , or one of four intervals ranging from one hour to one week. • Repeat Job Expiration —This can be set to Off , Same as Confidential Print , or one of four intervals ranging from one hour to one week. 8 Under Advanced Setti...

Troubleshooting Login issues “Unsupported USB Device” error message M AKE SURE A SUPPORTED S MART C ARD READER IS ATTACHED Only the OmniKey reader that came with the printer is supported. Remove the unsupported reader and attach theOmniKey reader. The printer home screen fails to return to a locked ...

LDAP issues LDAP lookups take a long time and then fail This issue can occur during login (at “Getting User Info”) or during address book searches. Try one or more of thefollowing: M AKE SURE P ORT 389 ( NON ‑ SSL) AND P ORT 636 (SSL) ARE NOT BLOCKED BY A FIREWALL The printer uses these ports to com...

Held Jobs/Print Release Lite issues “You are not authorized to use this feature” Held Jobs error message A DD THE USER TO THE APPROPRIATE A CTIVE D IRECTORY GROUP If user authorization is enabled for Held Jobs, then add the user to an Active Directory group that is included in theauthorization list ...

Appendix A: Using the touch screen Understanding the home screen The screen located on the front of the MFP is touch ‑ sensitive and can be used to access device functions and navigate settings and configuration menus. The home screen looks similar to this (yours may contain additional icons): @ Sta...

Appendix C: Description of access controls Access controls Depending on the device type and installed options, some access controls (referred to on some devices as FunctionAccess Controls) may not be available for your printer. Administrative Menus Function access control What it does Configuration ...

Appendix D: Using Common Access Cards Using a Common Access Card to access the printer 1 Insert your Common Access Card into the card reader attached to the printer. 2 When prompted, enter your PIN using the keypad that appears on the touch screen, and then touch Next . It may take a moment for the ...

Notices LEXMARK SOFTWARE LICENSE AGREEMENT PLEASE READ CAREFULLY BEFORE INSTALLING AND/OR USING THIS SOFTWARE: This Software License Agreement("License Agreement") is a legal agreement between you (either an individual or a single entity) and LexmarkInternational, Inc. ("Lexmark") th...

Index A access controls list of 47setting at the device 12using the EWS to set 34 acronyms 46AppleTalk disabling 18 assumptions 6audit logging configuring 20 authentication token 30 B backup password using the touch screen to enable 9 before configuring the device verifying firmware 6verifying physi...