Lexmark 4800 Series - Manuals

Setting up the printer Checking the box contents 1 2 3 W F I I P R IN TIN G 5 6 7 1 2 3 4 Name Description 1 Black print cartridge Cartridges to be installed into the printer. Note: Cartridge combinations vary depending on the product purchased. 2 Color print cartridge 3 Power cord Attaches to the p...

Understanding the parts of the printer W F I I PRINT IN G W F I I P R INTING 1 2 3 7 8 9 10 11 5 4 6 Use the To 1 Paper support Load paper. 2 Control panel display View menus. 3 Control panel Operate the printer. For more information, see “Using the control panel” on page 26. 4 Wi-Fi indicator Check...

Standalone setup 1 Unpack the printer. 1 2 3 W F I I P R IN TIN G 5 6 7 1 2 3 4 2 Remove all tape and packing material from all areas of the printer. W F I I P R IN TIN G 3 Extend the paper exit tray. W F I I PR IN TIN G 1 2 18

20 Discard the alignment page. Notes: • The alignment page may differ from the one shown. • Streaks on the alignment page are normal, and do not indicate a problem. Understanding the printer software Using the software that installed with your printer, you can edit photos, send faxes, maintain your ...

Understanding the control panel Using the control panel The display shows: • Mode indicators • Main menu art messages • Icons • Ink cartridge levels Mode Main Menu Area Message 1 • Scroll through submenus. • Increase the numbers of copies to be printed. 2 • Scroll through menus, submenus, or setting...

A 1 2 3 5 4 6 7 8 9 11 10 Navigating the control panel menus The main menu consists of these items: • Copy • Photo • Print Files • Scan • Setup • Maintenance 1 Press or repeatedly until the item you want is highlighted. 2 Press . The menu that matches the previously highlighted item appears: • Copy ...

Within each menu item or submenu, there are choices called values . For instance, the Color menu item has values of Color and Black & White . • Press or repeatedly to scroll through menu items or submenus. • Press or repeatedly to scroll through values. • In some menus, you can press to see a pr...

Installing the printer software Using the installation software CD (Windows users only) Using the CD that came with the printer: 1 Start Windows. 2 When the desktop appears, insert the software CD. The software installation screen appears. 3 Click Install . Using the installation software CD (Macint...

To turn the voice notification on or off: 1 Do one of the following: • In Windows Vista, click . • In Windows XP and earlier, click Start . 2 Click Programs or All Programs Œ Lexmark 4800 Series . 3 Click Solution Center . 4 Click Advanced . 5 Click Printing Status . 6 Select or clear Play voice not...

Networking General networking Networking overview A network is a collection of devices such as computers, printers, Ethernet hubs, wireless access points, and routers connected together for communication through cables or through a wireless connection. A network can be eitherwired, wireless, or desi...

Scenario 3: Computer, laptop, and printer connected wirelessly without Internet • A computer, a laptop, and a printer are connected wirelessly to a wireless access point. • The network has no connection to the Internet. Scenario 4: Laptop connected wirelessly to printer without Internet • A laptop i...

If you purchased the internal wireless print server separately, the MAC address appears on an adhesive label thatcame with the wireless print server. Attach the adhesive label to your printer so you will be able to find the MACaddress when you need it. UAA: XX XX XX XX XX XX Note: A list of MAC addr...

On the computer that is attached to the printer: a Click Start ΠSettings ΠPrinters or Printers and Faxes . b Right-click the Lexmark 4800 Series icon. c Click Sharing . d Click Shared As , and give the printer a distinctive name. e Click OK . 3 Locate the printer from the remote computer. Note: Th...

3 Press Enter . The IP address appears as four sets of numbers separated by periods, such as 192.168.0.100. Assigning an IP address An IP address may be assigned by the network using DHCP. The print object, created at the end of the installation,sends all print jobs across the network to the printer...

6 Click Share this printer , and assign a name to your printer. 7 Follow the directions on the computer screen until installation is complete. Windows 2000 or Windows XP users only: 1 For more information, see the setup information that came with your printer. 2 Click Start ΠSettings ΠPrinters . 3...

Types of wireless networks Networks can operate in one of two modes: infrastructure or ad hoc. Lexmark recommends setting up a network ininfrastructure mode using the installation CD that came with the printer. A wireless network where each device communicates with others through a wireless access p...

Advanced wireless setup Creating an ad hoc wireless network using Windows The recommended way to set up your wireless network is to use a wireless access point (wireless router). A networkset up this way is called an infrastructure network . If you have an infrastructure network in your home, you sh...

Loading paper and original documents Loading paper 1 Make sure: • You use paper designed for inkjet printers. • If you are using photo, glossy, or heavyweight matte paper, you load it with the glossy or printable side facingyou. (If you are not sure which side is the printable side, see the instruct...

Printing Printing basic documents Printing a document 1 Load paper. 2 With a document open, click File ΠPrint . 3 Click Properties , Preferences , Options , or Setup . 4 Adjust the settings. 5 Click OK . 6 Click OK or Print . Printing a Web page You can use the Toolbar to create a printer-friendly ...

Printing photos or images from a Web page 1 Load paper. For best results, use photo or heavyweight matte paper, with the glossy or printable side facingyou. (If you are not sure which side is the printable side, see the instructions that came with the paper.) 2 Open a Web page with Microsoft Interne...

Printing documents from a removable storage device 1 Make sure the printer is connected to a computer by a USB cable, and both the printer and the computer areon. 2 Insert a memory card into a card slot, or insert a flash drive into the PictBridge port on the front of the printer. Notes: • If only d...

Printing specialty documents Choosing compatible specialty paper types • Heavyweight matte paper —A photo paper with a matte finish used for printing high-quality graphics. • Lexmark PerfectFinish TM Photo paper —A high-quality photo paper specifically designed for Lexmark inkjet printers, but compa...

Printing on both sides of the paper Understanding the two-sided printing (duplexing) function The printer has a built-in duplex unit that lets you print on both sides of the paper automatically. This function is alsoknown as two-sided printing or duplexing. Note: Automatic two-sided printing (duplex...

Note: Automatic two-sided printing (duplexing) works only with plain paper in letter and A4 sizes. If you want to print two-sided documents on another type or size of paper, use the manual duplexing method. 1 Press A . 2 With a document open, click File ΠPrint . 3 Click Properties, Preferences, Opt...

5 From the Save Settings drop-down menu, select Save your current settings . 6 Click a radio button next to the number of the location where you want to save your settings, then type a namefor your settings in the selected box. Note: The first location contains Factory Default Settings, which cannot...

Note: Factory default settings cannot be deleted. Resetting the printer to factory default settings You can reset your printer to the original settings without using the printer software. Note: Resetting to factory default settings will delete all printer settings you selected. 1 Press repeatedly to...

Working with photos Using recommended paper For best results when printing photos or other high-quality images, use Lexmark Photo Paper or LexmarkPerfectFinish Photo Paper. Do not use Lexmark Premium Photo Paper. Your print cartridges are not compatible with this type of paper. Retrieving and managi...

From here You can Print Camera Selections Print Digital Print Order Format (DPOF) selections. This option appears only when there is a valid DPOF file on your memorydevice. Printing photos from a PictBridge-enabled digital camera PictBridge is a technology available in most digital cameras that lets...

3 If the PictBridge connection is successful, the following message appears on the display: Camera Connected. Refer to Camera display or Camera owners manual for further information. After a few seconds, the following message appears: Use Camera to choose and print photos. Press to select printer de...

Notes: • The printer recognizes one memory card at a time. If you insert more than one memory card, a message appearson the display prompting you to remove all memory cards inserted. • If a USB flash drive is inserted together with the memory card, a message appears on the display promptingyou to ch...

If the printer is connected to a wireless network, you will be asked to select the computer that you want to use. a Press or to select a computer. b Press . If you set a PIN during network setup and are being asked for it: 1 Enter the PIN using the and to select a digit location and the and to selec...

Transferring photos from a memory card to a flash drive 1 Insert a memory card that contains the images you want to transfer. 2 After the memory card is detected, press . 3 Press repeatedly until Save Photos is highlighted. 4 Press . 5 Press or to select USB Flash Drive . 6 Insert the flash drive. 7...

Changing the Productivity Studio library preferences 1 From the desktop, double-click the Productivity Studio icon. 2 From the Tools menu, click Preferences . 3 Click Library . From here, you can choose how you want to sort photos. You can also set the minimum file size for the phototo appear in the...

8 Press to select Edit Photo . From here You can Brightness Adjust the brightness of a photo. Rotate Rotate a photo in 90-degree increments clockwise or counterclockwise. Crop Crop a photo. Auto Enhance Enhance a photo automatically. Remove Red Eye Reduce the red-eye effect caused by light reflectio...

Printing photos Printing photos from a CD or removable storage device using the computer 1 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printableside, see the instructions that came with the paper.) 2 Insert a CD or any removable storage devic...

14 From the Send Quality and Speed area of the screen, select the image size. 15 Click Create E-mail to create an e-mail message with your photo greeting card(s) attached. Viewing a slideshow of photos on the control panel display 1 Insert a memory card or flash drive. 2 From the control panel, pres...

Printing all photos from a memory device 1 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printableside, see the instructions that came with the paper.) 2 Insert a memory card or flash drive. 3 From the control panel, press . 4 Press repeatedly ...

11 From the control panel, press to select Scan Proof Sheet . 12 Press . The printer scans the proof sheet. 13 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printableside, see the instructions that came with the paper.) Note: Make sure the pape...

Copying Making a copy 1 Load paper. 2 Load an original document facedown on the scanner glass. 3 From the control panel, press or repeatedly until Copy is highlighted. 4 Press or to select the number of copies. The number of copies is automatically set to 1. 5 Press . Making a color or black-and-whi...

6 Adjust the copy settings as needed. To make a borderless copy, choose Borderless under Resize. For moreinformation, see “Understanding the Copy Mode menu” on page 83. 7 After making your choices, press to save your settings temporarily. 8 Press . Note: To prevent smudging or scratching, avoid touc...

4 Press or to select the number of copies. The number of copies is automatically set to 1. 5 Press . 6 Press repeatedly until Resize is highlighted. 7 Press or to choose among the following options: 50 percent, 100 percent, 200 percent, Custom, Fit to Page, 2x2 Poster, 3x3 Poster, 4x4 Poster, or Bor...

6 Press repeatedly until Lighter/Darker is highlighted. 7 Press or to adjust the brightness of the copy. 8 Press to preview the copy. 9 Press to continue adjusting the settings. 10 Repeat step 8 to step 9 as needed. 11 Press to save your settings temporarily. 12 Press . Collating copies using the co...

Repeating an image on one page You can print the same image multiple times on one sheet of paper. This option is helpful in creating labels, decals,flyers, handouts, and so on. 1 Load paper. 2 Load an original document facedown on the scanner glass. 3 From the control panel, press or repeatedly unti...

8 Press to save your settings temporarily. 9 Press . The printer scans the first page of the original document. 10 When asked if you want to copy another page, press to choose Yes . 11 Load the second page of the original document facedown on the scanner glass, and then press . The printer scans the...

4 Press . From here You can Color Choose to copy in color and black and white. Quality Adjust the quality of a copy. You can choose among the followingoptions: Normal, Photo, Auto, or Draft. Content Type Specify the type of document being copied: Text and Graphics, Photo,Text Only, or Line Drawing. ...

Scanning Scanning a document 1 Make sure the printer is connected to a computer, and both the printer and the computer are on. 2 Load an original document facedown on the scanner glass. 3 From the control panel, press or until Scan is highlighted. 4 Press . 5 If your printer is connected to more tha...

Making a color or black-and-white scan 1 Make sure the printer is connected to a computer, and both the printer and the computer are on. 2 Load an original document facedown on the scanner glass. 3 From the control panel, press or until Scan is highlighted. 4 Press . 5 If your printer is connected t...

2 From the desktop, double-click the Productivity Studio icon. 3 Click Scan . 4 Select the Several Photos option. 5 Click Start . Creating a PDF from a scanned item 1 Load an original document facedown on the scanner glass. 2 From the desktop, double-click the Productivity Studio icon. 3 From the We...

4 Change the settings as needed. Setting Options Color Depth Select Color, Grey, or Black and White. Scan Resolution (Dots Per Inch) Select a scan resolution value from the drop-down list. Size • You can auto-crop the scanned item. • You can select the area to be scanned. From the drop-down list,sel...

Scanning to a computer over a network using the control panel 1 Make sure: • The printer is connected to a network through a print server or through the wireless network connection. • The printer, the print server (if used), and the computer receiving the scan are all turned on. • The printer is con...

From here You can Original Size Set the size of the original document: Auto Detect, L, 2L, A6, A5, B5, A4, Wallet,3 in x 5 in, 4 in x 6 in, 4 in x 8 in, 5 in x 7 in, 8 in x 10 in, or letter. 7 Use the control panel buttons to navigate the menu items and make your choices. 8 Press to save your settin...

Scanning documents or images for e-mailing You can e-mail attached scanned images using your default e-mail application. 1 Load an original document facedown on the scanner glass. W F I I P R IN TIN G 2 From the desktop, double-click the Productivity Studio icon. 3 Click E-mail . 4 Select from the P...

Faxing Receiving a fax automatically 1 From the desktop, double-click the Productivity Studio icon. 2 From the Settings area in the left pane of the Welcome screen, click Setup and manage faxes . 3 From the Receiving Faxes screen in the Fax Solutions Software, select Automatically , if not already s...

Maintaining the printer Installing print cartridges 1 Open the printer. 2 Press down on the cartridge carrier levers. W F I I P R IN TIN G 3 Remove the used print cartridge or cartridges. For more information, see “Removing a used print cartridge” onpage 96. 4 If you are installing new print cartrid...

Removing a used print cartridge 1 Make sure the printer is on. 2 Lift the scanner unit. The print cartridge carrier moves and stops at the loading position, unless the printer is busy. 3 Press down on the cartridge carrier latch to raise the cartridge carrier lid. W F I I P R IN TIN G 4 Remove the u...

To prevent the message from appearing again for the indicated cartridge(s): • Replace your cartridge(s) with new Lexmark print cartridge(s). • If you are printing from a computer, click Learn more on the message, select the check box, and click Close . • If you are using the printer without a comput...

4 Using another clean section of the cloth, gently hold the cloth against the contacts for about three seconds, andthen wipe in the direction shown. 5 With another clean section of the cloth, repeat step 3 and step 4. 6 Let the nozzles and contacts dry completely. 7 Reinsert the print cartridges. 8 ...

Cleaning the scanner glass 1 Dampen a clean, lint-free cloth with water. 2 Gently wipe the scanner glass clean. Note: Make sure all ink or corrective fluid on a document is dry before placing the document on the scanner glass. Cleaning the exterior of the printer 1 Make sure that the printer is turn...

Troubleshooting If you set up your printer on a wireless network, make sure: • The wireless network is working properly. • The computer and printer are both connected to the same wireless network. • The printer is within the range of the wireless network. The effective range for optimal performance ...

Disconnect and reconnect the power cord 1 Disconnect the power cord from the wall outlet, and then from the printer. 2 Plug the cord all the way into the power supply on the printer. 1 2 3 Plug the cord into an electrical outlet that other electrical devices have been using. 4 If the light is not on...

Reconnect power supply 1 Press to turn the printer off. 2 Disconnect the power cord from the wall outlet. 3 Gently remove the power supply from the printer. 4 Reconnect the power supply to the printer. 5 Plug the power cord into the wall outlet. 6 Press to turn the printer on. Disable anti-virus pro...

Check cartridges 1 Remove the print cartridges. 2 Make sure the sticker and tape have been removed. 1 2 3 Reinsert the cartridges. Check printer default and pause settings 1 Do one of the following: • In Windows Vista, click Œ Control Panel . • In Windows XP, click Start . 2 Click Printers Œ Printer...

For more information, see the computer documentation. Solving printer communication problems The printer and the computer cannot exchange data. These are possible solutions. Try one or more of the following: Establish bidirectional communication between the printer and the computer For more informat...

Wireless network printer does not print These are possible solutions. Try one or more of the following: Check power Make sure the light is on. Check cable • Make sure the power cable is connected to the printer and to the electrical outlet. • Make sure the USB cable or the installation cable is not ...

4 Verify that XXXX_Series_nnnnnn_P1 is selected, where XXXX is the model series number of your printer and nnnnnn is the last six numbers of the MAC address of your printer. Note: The MAC address is located at the back of the printer beside the serial number. 5 If USB is selected instead: a Select t...

b Select the appropriate connection from the ones shown. Note: If the computer is connected to the access point (router) by an Ethernet cable, the connection may not include the word “wireless” in its name. c Right-click the connection, and then click Repair . Run the wireless setup again If your wi...

Check security keys Make sure security keys are correct. For more information, see “Check your security keys” on page 106. Move your computer and/or printer Move the computer and/or printer closer to the wireless access point (wireless router). Although the possible distancebetween devices in 802.11...

2 Click Programs or All Programs ΠLexmark 4800 Series . 3 Click Wireless Setup . Note: You may be prompted to connect the printer to the computer again using the installation cable as part of the setup process. 4 Follow the instructions on the computer screen, including typing in the SSID of the wi...

c Press Enter . • The “Default Gateway” entry is typically the wireless access point (wireless router). • The IP address appears as four sets of numbers separated by periods, such as 192.168.0.100. Your IPaddress might also start with the numbers 10 or 169. This is determined by your operating syste...

b Select the appropriate connection from the ones shown. Note: If the computer is connected to the access point (router) by an Ethernet cable, the connection may not include the word “wireless” in its name. c Right-click the connection, and then click Repair . Ping the printer 1 Do one of the follow...

Resetting an internal wireless print server to factory default settings 1 From the control panel, press or repeatedly until Setup appears. 2 Press . 3 Press or repeatedly until Network Setup appears. 4 Press . 5 Press or repeatedly until Reset Network Adapter Defaults appears. 6 Press . The followin...

• If your camera does not allow you to change the paper size setting, use the control panel to change the papersize to 4 x 6 in. (10 x 15 cm). 1 Insert the USB cable that came with your camera into the camera, and insert the other end into the PictBridgeport on the front of the printer. 2 Turn the c...

Check print cartridges If the document still does not have the print quality you want, follow these steps: 1 Align the print cartridges. For more information, see “Aligning print cartridges” on page 97. If print quality hasnot improved, continue to the next step. 2 Clean the print cartridge nozzles....

Removing and reinstalling the software Software may not be installed correctly. Poor quality at the edges of the page These are possible solutions. Try one or more of the following: Check minimum print settings Unless you are using the borderless feature, use these minimum print margin settings: • L...

Checking the print cartridges Are the print cartridges properly installed? For more information, see “Installing print cartridges” on page 94. Are the sticker and tape removed from the cartridges? Lift the scanner unit. Press down on the cartridge carrier latches to raise the cartridge carrier lids....

3 Click Solution Center . 4 If an exclamation point (!) appears on either of the print cartridges, the ink level is low. Install a new cartridge. Glossy photo paper or transparencies stick together Do photos or transparencies dry and stick together on the paper exit tray? Remove the photos or transp...

Printed characters are improperly formed or are not aligned correctly Have you added spaces at the left margin? If the print is not aligned correctly, make sure you have not added spaces by pressing Enter or the spacebar (hard-coded spaces). Do you need to align the print cartridges? The cartridges ...

Checking the printer status Windows Vista users only 1 Click Œ Control Panel Œ Printer . 2 Make sure: • The printer icon does not say Paused . If the printer is paused, right-click the icon, and then click Resume Printing . • The printer icon says Ready . If it says Offline , right-click the icon, a...

Remove the sticker and tape from the print cartridges 1 Lift the scanner unit. 2 Remove the print cartridges from the print cartridge carrier. 3 Make sure the sticker and tape are removed from the bottom and back of the cartridges. Do the print cartridges have ink? 1 Do one of the following: • In Wi...

Was the document formatted or created for the printer? Windows may substitute different fonts. Line and page breaks may change with the font. Use the program thatcreated the document to fix these problems, and then save the changes for the next time you print. Printer is busy printing another job Wa...

Test page does not print These are possible solutions. Try one or more of the following: Make sure the printer is receiving power If is not on, the printer may not be receiving power. • Press . • Plug the printer into a different electrical outlet. • If the printer is plugged into a surge protector,...

Duplex unit does not operate correctly These are possible solutions. Try one or more of the following: Check paper size and type Check the paper size and type to make sure the paper is supported by the printer. If you are using automaticduplexing, use only letter- or A4-size plain paper. Check for p...

Make sure the print queue is ready to print Make sure the printer is set as the default printer and is not being held or paused. Printer is trying to print to File If the computer is sending the print jobs to File rather than to the printer connected to the computer, first make surethe printer is at...

Cannot print from digital camera using PictBridge These are possible solutions. Try one or more of the following: Enable PictBridge printing from camera Enable PictBridge printing on the camera by selecting the correct USB mode. If the camera USB selection is incorrect,the camera will be detected as...

Windows XP users: 1 Click Start ΠSettings ΠPrinters and Faxes . 2 Right-click the Lexmark 4800 Series icon. 3 Click Sharing . 4 Select Share this printer , and then give the printer a distinctive name. 5 Click OK . Windows 2000 users: 1 Click Start ΠSettings ΠPrinters . 2 Right-click the Lexmark...

Problems when copying, scanning, or faxing Close other software Close all programs not being used. Change the scanning resolution to a lower value 1 Load an original document facedown on the scanner glass. 2 From the desktop, double-click the Productivity Studio icon. 3 From the left pane of the Wel...

Make sure the printer is receiving power If the button is not lit, the printer may not be receiving power. • Plug the printer into a different outlet. • If the printer is plugged into a surge protector, unplug the printer, and plug it directly into an electrical outlet. Make sure the external print ...

4 Press . 5 Reprint any missing pages. To avoid paper jams, do not force paper into the printer. Paper jam in the printer Eject the paper automatically To remove the paper jam, eject the paper: 1 Press and hold . 2 Remove the paper from the paper exit tray. Remove the paper manually 1 Press to turn ...

5 Select Letter Banner or A4 Banner as the paper size. 6 Select Portrait or Landscape . 7 Click OK . 8 Click OK or Print . Paper continues to jam Are you using paper designed for an inkjet printer? Check the type of paper you are using. Some low-quality papers may be too thin or too slick to be fed ...

3 Firmly grasp the paper, and gently pull it out. 4 Push down on the duplex latch as you reinstall the duplex unit. 5 Press . 6 On your computer, delete or stop the print job, and then try resending the print job again. Memory card troubleshooting Memory card cannot be inserted These are possible so...

Check memory card placement Make sure you inserted the memory card into the correct slot. Check memory card type Make sure that the type of memory card you are using can be used in the printer. Check to see if the memory card is damaged Check to see that there is no obvious damage to the memory card...

Poor copy quality • Blank pages • Checkerboard pattern • Distorted graphics or pictures • Missing characters • Faded print • Dark print • Skewed lines • Smudges • Streaks • Unexpected characters • White lines in print These are possible solutions. Try one or more of the following: Check messages If ...

Copied item does not match the original item Is the original document loaded correctly on the scanner glass? • Make sure the original document is placed in the lower right corner of the scanner glass. • Place the item you want to copy facedown on the scanner glass. • Make sure the lower right corner...

Poor scanned image quality These are possible solutions. Try one or more of the following: Check messages If an error message is displayed, see “Error messages on the printer display” on page 147. Clean the scanner glass If the scanner glass is dirty, gently wipe it with a clean, lint-free cloth dam...

Error messages on the printer display Alignment Error These are possible solutions. Try one or more of the following: Remove tape from print cartridge 1 Remove the print cartridge. 2 Make sure the sticker and tape have been removed. 1 2 3 Reinsert the cartridge. 4 Press to align the cartridge. For m...

8 If the error: • Reappears, replace the black (or photo) print cartridge with a new one, close the cartridge carrier lid, andclose the scanner unit. • Does not reappear, reinsert the color print cartridge, close the cartridge carrier lid, and close the scannerunit. 9 If the error reappears, replace...

The following TIFF formats as read from a camera card or USB flash drive are supported: • RGB uncompressed data: Baseline TIFF Rev. 6.0 RGB Full Color Images • YCbCr uncompressed data: TIFF Rev. 6.0 Extensions YCbCr Images Only TIFF files created directly from digital cameras and not modified by com...

4 Press or repeatedly to select the paper size option that will fit your largest photo size. 5 Press Start Color or Start Black to begin printing. PictBridge Communication Error Remove and then reinsert the USB cable that came with the camera into the PictBridge port on the front of the printer. Ple...

Two-sided paper type error You have not selected the correct paper type or size for duplex printing. 1 Select . 2 Press to choose Paper Handling . 3 Press to choose Type or Size . 4 Press or to choose the correct selection. Note: Use only plain paper in letter or A4 size. The printer will not make d...

Left/Right Cartridge Missing ? This message indicates that one of the necessary cartridges is missing. You need to install a print cartridge. Communication not available The printer and computer may not be able to exchange data. Is the printer receiving power? If is not lit, the printer may not be r...

Try the following: • Before sending a document to print, close any other open programs. The printer may print a blank page whentoo many programs are open on the computer. • Follow the instructions on the error screen. These instructions reduce the amount of memory needed to print. Out of Paper 1 Loa...

Notices Product information Product name: Lexmark 4800 Series Machine type: 4428 Model(s): W22 W2E Edition notice June 2007 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITH...

Avis de conformité aux normes de l’industrie du Canada Cet appareil numérique de classe B est conforme aux exigences de la norme canadienne relative aux équipements pouvant causer desinterférences NMB-003. Industry Canada notice The following notices are applicable if your printer has a wireless net...

Nederlands Hierbij verklaart Lexmark International, Inc. dat het toestel dit product in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Norsk Lexmark International, Inc. erklærer herved at dette produktet er i samsvar med de grunnleggende krav og...

ENERGY STAR Power consumption Product power consumption The following table documents the power consumption characteristics of the product. Note: Some modes may not apply to your product. Mode Description Power consumption (Watts) Printing The product is generating hard-copy output from electronic i...

Limitation of liability Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance or nonperformance ofLexmark or a Remarketer for this product under this limited warranty, you may recover actual damages up to the limit set forth in thefollowing ...

Networking glossary ad hoc mode A setting for a wireless device that lets it communicate directly with other wirelessdevices without an access point or router ad hoc network A wireless network that does not use an access point AutoIP address An IP address automatically assigned by a network device. ...

Index A ad hoc wireless network adding a printer usingWindows 40creating using Windows 39 adjusting brightnessautomatically 68, 70adjusting the hue of a photo 69adjusting the saturation of aphoto 69Advanced button 25aligning print cartridges 97alignment error 147assigning IP address 36 B banner pape...