Lexmark 35ST894 - Manuals

1 Right side 30 cm (12 in.) 2 Front 51 cm (20 in.) 3 Left side 20 cm (8 in.) 4 Rear 20 cm (8 in.) 5 Top 75 cm (29 in.) Printer configurations CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you ar...

1 2 3 4 9 10 6 5 8 7 1 Printer control panel 2 Automatic document feeder (ADF) 3 ADF tray 4 ADF bin 5 Front door release button 6 Standard 250 ‑ sheet tray 7 Optional 250 ‑ or 550 ‑ sheet tray 8 100 ‑ sheet multipurpose feeder 9 Paper stop 10 Standard bin Understanding the basic functions of the sca...

Using the ADF and scanner glass Automatic document feeder (ADF) Scanner glass Use the ADF for multiple ‑ page documents including two-sided (duplex) pages. Use the scanner glass for single ‑ page documents, book pages, small items (such as postcards or photos), transparencies, photo paper,or thin me...

Understanding the printer control panel Using the printer control panel 1 7 8 2 3 4 5 6 9 Use the To 1 Display • View the printer status and messages. • Set up and operate the printer. 2 Home button Go to the home screen. 3 Tips Open a context-sensitive Help dialog. 4 Clear all / Reset button Reset ...

Indicator light Printer status Blinking red The printer requires user intervention. Sleep button light Printer status Off The printer is off, idle or in Ready state. Solid amber The printer is in Sleep mode. Blinking amber The printer is entering or waking from Hibernate mode. Blinking amber for 0.1...

Touch To 7 Status/Supplies • Show a printer warning or error message whenever the printer requires intervention tocontinue processing. • View more information on the printer warning or message, and on how to clear it. This may also appear on the home screen: Touch To Search Held Jobs Search current ...

Setting up and using the home screen applications Notes: • Your home screen, icons, and buttons may vary depending on your home screen customization settings,administrative setup, and active embedded applications. • There may be additional solutions and applications available for purchase. To learn ...

3 Click Advanced > TCP/IP . 4 Look for IPv4 Address . Finding the IP address of the printer Note: Make sure your printer is connected to a network or to a print server. You can find the printer IP address: • From the top left corner of the printer home screen. • From the TCP/IP section in the Net...

Understanding the different applications Use To Card Copy Scan and print both sides of a card on a single page. For more information, see “Setting up Card Copy”on page 21. Fax Scan a document, and then send it to a fax number. For more information, see “Faxing” on page 103. Forms and Favorites Quick...

Use To Streamline work processes by letting you quickly find and print frequently used online forms directlyfrom the printer home screen. Note: The printer must have permission to access the network folder, FTP site, or Web site where the bookmark is stored. From the computer where the bookmark is s...

3 Change the default scanning options, if necessary. • Default tray —Select the default tray to be used for printing scan images. • Default number of copies —Specify the number of copies that should automatically print when the application is used. • Default contrast setting —Specify a setting to in...

1 Open a Web browser, and then type the printer IP address in the address field. Note: View the printer IP address on the printer home screen. The printer IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. 2 Click Settings > Apps > Apps Management > Mu...

Additional printer setup Installing internal options CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cordfrom the electrical outlet before continui...

Accessing the controller board CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cordfrom the electrical outlet before continuing. If you have any ot...

2 1 3 4 1 Memory card connector 2 Option card connector 3 Printer hard disk connector 4 Lexmark Internal Solutions Port connector 4 Close the shield, and then the access door. 1 2 Installing a memory card CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware...

Installing an optional card CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cordfrom the electrical outlet before continuing. If you have other dev...

4 Push the card firmly into place as shown in the illustration. Warning—Potential Damage: Improper installation of the card may cause damage to the card and the controller board. Note: The entire length of the connector on the card must touch and be flushed against the controller board. 5 Close the ...

14 Close the shield. 15 Close the ISP exterior cover. Note: When the printer software and any hardware options are installed, it may be necessary to manually add the options in the printer driver to make them available for print jobs. For more information, see “Updating availableoptions in the print...

Removing a printer hard disk Warning—Potential Damage: Controller board electronic components are easily damaged by static electricity. Touch a metal surface on the printer before touching any controller board electronic components or connectors. 1 Access the controller board. For more information, ...

Installing hardware options Order of installation CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely. CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices...

Attaching cables CAUTION—POTENTIAL INJURY: Do not use the fax feature during a lightning storm. Do not set up this product or make any electrical or cabling connections, such as the fax feature, power cord, or telephone, during alightning storm. Connect the printer to the computer using a USB cable ...

Use the To 8 Security slot Attach a lock that will secure the printer in place. Setting up the printer software Installing the printer software Notes: • If you installed the printer software on the computer before but need to reinstall the software, then uninstallthe current software first. • Close ...

Updating available options in the printer driver When any hardware options are installed, you may need to manually add the options in the printer driver to makethem available for use. For Windows users 1 Open the printers folder. In Windows 8 From the Search charm, type run , and then navigate to: A...

Networking Notes: • Purchase a MarkNet N8350 wireless network adapter for MX510de, MX511de, and MX511dhe printer models orMarkNet N8352 wireless network adapter for MX410de printer model first before setting up the printer on awireless network. For more information on installing the wireless network...

d Click the IP tab. e Type the printer IP address in the address field, and then click Add . • For AppleTalk printing: Notes: – Make sure AppleTalk is activated on your printer. – This feature is supported only in Mac OS X version 10.5. a From the Apple menu, navigate to: System Preferences > Pri...

Notes: – If you do not know the SSID of the network that your computer is connected to, then launch the wireless utilityof the computer network adapter, and then look for the network name. If you cannot find the SSID or thesecurity information for your network, then see the documentation that came w...

6 Type the new IP address in the “Printer Name or IP Address” field. 7 Click OK > Close . For Macintosh users 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer control panel. The IP address appears as four sets of ...

In Windows 7 or earlier 1 Click , or click Start and then click Run . 2 In the Start Search or Run dialog, type devmgmt.msc . 3 Press Enter or click OK . b Double ‑ click Ports (COM & LPT) to expand the list of available ports. c Do either of the following: • Press and hold the COM port where yo...

Loading paper and specialty media The selection and handling of paper and specialty media can affect how reliably documents print. For more information,see “Avoiding jams” on page 226 and “Storing paper” on page 74. Setting the paper size and type From the home screen navigate to: > Paper Menu &g...

Loading the multipurpose feeder Use the multipurpose feeder when printing on different paper sizes and types or specialty media, such as card stock,transparencies, paper labels, and envelopes. You can also use it for single ‑ page print jobs on letterhead. 1 Open the multipurpose feeder. 1 2 a Pull ...

• Load envelopes with the flap on the left side facedown. Warning—Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self ‑ stick adhesives. These envelopes may severely damage the printer. 5 From the printer control panel, set the paper size and paper type...

Creating a custom name for a paper type Using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbersseparated by periods, such as 123.123....

Using the printer control panel 1 From the home screen, navigate to: > Paper Menu > Custom Types 2 Select a custom paper type name, and then select a paper type Note: Paper is the factory default paper type for all user ‑ defined custom names. 3 Touch . Configuring a custom name Using the Embe...

Paper and specialty media guide Using specialty media Tips on using letterhead • Use letterhead designed specifically for laser printers. • Print samples on the letterhead being considered for use before buying large quantities. • Before loading letterhead, flex, fan, and straighten the stack to pre...

– Have any exposed adhesive when the flap is in the sealed or closed position – Have bent corners – Have rough, cockle, or laid finishes • Adjust the width guides to fit the width of the envelopes. Note: A combination of high humidity (over 60%) and high printing temperature may wrinkle or seal enve...

• Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Preprintingintroduces semi ‑ liquid and volatile components into the printer. • Use grain short card stock when possible. Paper guidelines Selecting the correct paper or specialty media reduces printing ...

For 60–90 ‑ g/m 2 (16–24 ‑ lb) bond paper, grain long paper is recommended. Fiber content Most high ‑ quality xerographic paper is made from 100% chemically treated pulped wood. This content provides the paper with a high degree of stability resulting in fewer paper feeding problems and better print...

• Surface roughness (measured in Sheffield units, impacts print clarity and how well toner fuses to the paper) • Surface friction (determines how easily sheets can be separated) • Grain and formation (impacts curling, which also influences the mechanics of how the paper behaves as it movesthrough th...

For more information about Lexmark, visit www.lexmark.com . General sustainability-related information can be found at the Environmental Sustainability link. Storing paper Use these paper storage guidelines to help avoid jams and uneven print quality: • For best results, store paper where the temper...

Paper size and dimension Standard 250 ‑ sheet tray Optional 250 ‑ or 550 ‑ sheet tray Multipurposefeeder ADF Scannerglass Duplexmode Other Envelope 85.7 x 165 mm to215.9 x 355.6 mm(3.375 x 6.50 in. to8.5 x 14 in.) X X X X X * Universal is supported in duplex mode only if the width is at least 210 mm...

Printing Printing forms and a document Printing forms Use the Forms and Favorites application to quickly and easily access frequently used forms or other information thatis regularly printed. Before you can use this application, first set it up on the printer. For more information, see “Settingup Fo...

Adjusting toner darkness Using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbersseparated by periods, such as 123.123.123.123. • If y...

Notes: • A flash drive icon appears on the printer home screen when a flash drive is inserted. • If you insert the flash drive when the printer requires attention, such as when a jam has occurred, then theprinter ignores the flash drive. • If you insert the flash drive while the printer is processin...

Recommended flash drives File type • Lexar JumpDrive FireFly (512MB and 1GB) • SanDisk Cruzer Micro (512MB and 1GB) • Sony Micro Vault Classic (512MB and 1GB) Documents: • .pdf • .xps Images: • .dcx • .gif • .jpeg or .jpg • .bmp • .pcx • .tiff or .tif • .png • .fls Printing from a mobile device To d...

5 From the printer home screen, release the print job. • For confidential print jobs, navigate to: Held jobs > select your user name > Confidential Jobs > enter the PIN > Print • For other print jobs, navigate to: Held jobs > select your user name > select the print job > specif...

Canceling a print job Canceling a print job from the printer control panel 1 From the printer control panel, touch Cancel Job or press on the keypad. 2 Touch the print job you want to cancel, and then touch Delete Selected Jobs . Note: If you press on the keypad, then touch Resume to return to the h...

Copying Automatic document feeder (ADF) Scanner glass Use the ADF for multiple ‑ page documents including two-sided (duplex) pages. Use the scanner glass for single-page documents, book pages, smallitems (such as postcards or photos), transparencies, photo paper,or thin media (such as magazine clipp...

• The ADF indicator light comes on when the paper is loaded properly. 2 Adjust the paper guides. 3 From the home screen, navigate to: Copy > specify the copy settings > Copy It Copying using the scanner glass 1 Place an original document facedown on the scanner glass in the upper left corner. ...

3 Navigate to: Copy to > select the tray that contains transparencies > Copy It If there are no trays that support transparencies, then navigate to: Manual Feeder > select the size of the transparencies > Transparency 4 Load transparencies into the multipurpose feeder, and then touch Cop...

Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazineclippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tr...

• The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. 3 From the home screen, navigate to: Copy > Content 4 Touch the button that best represents the content type of the document you are copying. • Te...

3 From the home screen, navigate to: Copy > Paper Saver > select the output you want > > Copy It Note: If Paper Saver is set to Off, then the Print Page Borders option is unavailable. Placing information on copies Placing a header or footer on pages 1 Load an original document faceup, sh...

Canceling a copy job Canceling a copy job while the original document is in the ADF When the ADF begins processing a document, touch Cancel Job on the printer control panel. Canceling a copy job while copying pages using the scanner glass From the home screen, touch Cancel Job . Canceling appears on...

Paper Saver This option lets you print two or more pages of an original document on the same page. Paper Saver is also called N- up printing where N stands for the number of pages. For example, 2-up would print two pages of your document on a single page, and 4-up would print four pages of your docu...

E-mailing Automatic document feeder (ADF) Scanner glass Use the ADF for multiple ‑ page documents. Use the scanner glass for single pages, small items (such as postcards orphotos), transparencies, photo paper, or thin media (such as magazineclippings). You can use the printer to e ‑ mail scanned doc...

Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazineclippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tr...

3 From the home screen, navigate to: E-mail > Recipient(s) > > type the name of the recipient > 4 Touch the name of the recipient. To search for additional recipients, touch New Search , and then type the name of the next recipient. 5 Touch > E ‑ mail It . Customizing e-mail settings ...

• JPEG —Create and attach a separate file for each page of your original document, viewable by most Web browsers and graphics programs. • XPS —Create a single XML Paper Specification (XPS) file with multiple pages, viewable using an Internet Explorer- hosted viewer and the .NET Framework, or by down...

Faxing Note: The fax function is available only in select printer models. Automatic document feeder (ADF) Scanner glass Use the ADF for multiple ‑ page documents including two-sided (duplex) pages. Use the scanner glass for single-page documents, book pages, smallitems (such as postcards or photos),...

Initial fax setup Many countries and regions require outgoing faxes to contain the following information in a margin at the top or bottomof each transmitted page, or on the first page of the transmission: fax name (identification of the business, other entity,or individual sending the message) and f...

4 In the Fax Number field, enter the printer fax number. 5 Click Submit . Choosing a fax connection Scenario 1: Standard telephone line Setup 1: Printer is connected to a dedicated fax line To connect: 1 Connect one end of the telephone cable that came with the printer to the port of the printer. 2 ...

Tips for this setup: • You can set the printer to receive faxes automatically (Auto Answer On) or manually (Auto Answer Off). • If you want to receive faxes automatically (Auto Answer On), then set the printer to pick up on any number of ringsthat you want. Setup 2: Printer is sharing the line with ...

Scenario 3: VoIP telephone service To connect: 1 Connect one end of the telephone cable that came with the printer to the port of the printer. 2 Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the VoIP adapter. Note: The port labeled Phone Line 2 or Fax Port is n...

Scenario 4: Digital telephone service through a cable provider Setup 1: Printer is connected directly to a cable modem 1 Connect one end of the telephone cable that came with your printer to the port of the printer. 2 Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port ...

Connecting the printer to a wall jack in Germany The German wall jack has two kinds of ports. The N ports are for fax machines, modems, and answering machines. TheF port is for telephones. N F N Connect the printer to any of the N ports. PHONE LINE N F N Faxing 115

1 Connect one end of the telephone cable that came the printer to the port of the printer. 2 Connect the other end of the telephone cable to the RJ ‑ 11 adapter, and then connect the adapter to an N port. 3 If you want to connect a telephone and answering machine to the same wall jack, then connect ...

3 In the Fax Name field, type the name to be printed on all outgoing faxes. 4 In the Fax Number field, enter the printer fax number. 5 Click Submit . Setting the date and time You can set the date and time so that they are printed on every fax you send. 1 Open a Web browser, and then type the printe...

Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazineclippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tr...

Sending a fax using a shortcut number Fax shortcuts are like the speed dial numbers on a telephone or a fax machine. A shortcut number (1–999) can containa single recipient or multiple recipients. 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass...

3 From the home screen, navigate to: Fax > enter the fax number > Options > Delayed Send Note: If Fax Mode is set to Fax Server, then the Delayed Send button does not appear. Faxes waiting for transmission are listed in the fax queue. 4 Specify the time the fax will be transmitted, and then...

3 Type a unique name for the shortcut, and then touch . 4 Verify that the shortcut name and number are correct, and then touch OK . If the name or number is incorrect, then touch Cancel , and then reenter the information. Customizing fax settings Changing the fax resolution 1 Load an original docume...

• If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Reports . 3 Click Fax Job Log or Fax Call Log . Blocking junk faxes 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP addre...

Holding and forwarding faxes Holding faxes This option lets you hold received faxes from printing until they are released. Held faxes can be released manually orat a scheduled day or time. 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP a...

Understanding the fax options Content This option lets you specify the content type and source of the original document. Select from the following content types: • Graphics —The original document is mostly business ‑ type graphics, such as pie charts, bar charts, and animations. • Photo —The origina...

Scanning Automatic document feeder (ADF) Scanner glass Use the ADF for multiple ‑ page documents. Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazineclippings). The scanner lets you scan documents directly to...

Automatic document feeder (ADF) Scanner glass Use the ADF for multiple ‑ page documents including two-sided (duplex) pages. Use the scanner glass for single-page documents, book pages, smallitems (such as postcards or photos), transparencies, photo paper,or thin media (such as magazine clippings). T...

Scanning to an FTP address You can use the printer to send scanned documents to an FTP address in a number of ways. You can type the FTPaddress, use a shortcut number, or use the address book. You can also use the Multi Send, Scan to Network, orMyShortcut application from the printer home screen. Fo...

Scanning to a computer or flash drive Automatic Document Feeder (ADF) Scanner glass Use the ADF for multiple ‑ page documents. Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazineclippings). The scanner lets y...

Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such asmagazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly. b If you are loading a document into the ADF tr...

7 From the printer control panel, touch Scan to Computer and then select from the following options: • Scan —Scan and save the document directly to a selected location on the computer. • Scan for Print —Scan and automatically print the document. • Scan for E ‑ mail —Attach a scanned document to an e...

Understanding the printer menus Menus list Paper Menu Reports Network/Ports Security Default SourcePaper Size/Type Configure MP Substitute Size Paper Texture Paper Weight Paper Loading Custom Types Custom Names 1 Custom Scan Sizes Universal Setup Menu Settings PageDevice Statistics Stapler Test Netw...

Paper menu Default Source menu Use To Default Source Tray [x]Multipurpose FeederManual PaperManual Envelope Set a default paper source for all print jobs. Notes: • Tray 1 (standard tray) is the factory default setting. • From the Paper menu, set Configure MP to "Cassette" for MultipurposeFee...

Use To Manual Paper Type Plain PaperCard StockTransparencyRecycledLabelsVinyl LabelsBondLetterheadPreprintedColored PaperLight PaperHeavy PaperRough/CottonCustom Type [x] Specify the paper type being manually loaded. Notes: • Plain Paper is the factory default setting. • From the Paper menu, set Con...

Substitute Size menu Use To Substitute Size OffStatement/A5Letter/A4All Listed Substitute a specified paper size if the requested paper size is not available. Notes: • All Listed is the factory default setting. All available substitutions areallowed. • Off indicates that no size substitutions are al...

Use To Rough Envelope Texture Rough Specify the relative texture of the rough envelopes loaded. Letterhead Texture SmoothNormalRough Specify the relative texture of the letterhead loaded. Note: Normal is the factory default setting. Preprinted Texture SmoothNormalRough Specify the relative texture o...

Use To Rough/Cotton Weight LightNormalHeavy Specify the relative weight of the cotton or rough paper loaded. Note: Normal is the factory default setting. Custom [x] Weight LightNormalHeavy Specify the relative weight of the custom paper loaded. Notes: • Normal is the factory default setting. • The o...

Use To Custom [x] Loading DuplexOff Determine and set two ‑ sided printing for all print jobs that specify Custom [x] as the paper type. Note: Custom [x] Loading is available only if the custom type is supported. Notes: • Duplex sets two ‑ sided printing as the default for all print jobs unless one ...

Custom Scan Sizes menu Use To Custom Scan Size [x] Scan Size NameWidthHeightOrientation PortraitLandscape 2 scans per side OffOn Specify a custom scan size name and page orientation. Notes: • The custom scan size name replaces Custom Scan Size [x] in the printermenus. • ADF Media Type is the factory...

Use To Feed Direction Short EdgeLong Edge Specify the feed direction if the paper can be loaded in either direction. Notes: • Short Edge is the factory default setting. • Long Edge appears only when the longest edge is shorter than themaximum width supported in the tray. Reports Menu Reports menu Us...

Use To Fax Shortcuts Print a report containing information about fax shortcuts. FTP Shortcuts Print a report containing information about FTP shortcuts. Profiles List Print a list of profiles stored in the printer. Print Fonts Print a report of all the fonts available for the printer language curren...

Reports menu To access the menu, navigate to either of the following: • Network/Ports > Standard Network > Standard Network Setup > Reports • Network/Ports > Network [x] > Network [x] Setup > Reports Use To Print Setup Page Print a report containing information about the network pr...

Use To Netmask View or change the current TCP/IP netmask. Gateway View or change the current TCP/IP gateway. Enable DHCP OnOff Specify the DHCP address and parameter assignment. Note: On is the factory default setting. Enable RARP OnOff Specify the RARP address assignment setting. Note: Off is the f...

Note: This menu is available only in network printers or printers that are attached to print servers. Use To Enable IPv6 OnOff Enable IPv6 in the printer. Note: On is the factory default setting. Auto Configuration OnOff Specify whether or not the wireless network adapter accepts theautomatic IPv6 a...

Use To Compatibility 802.11b/g802.11b/g/n Specify the wireless standard for the wireless network. Note: The 802.11b/g/n is the factory default setting. Choose Network Select an available network for the printer to use. View Signal Quality View the quality of the wireless connection. View Security Mo...

Use To ENA Address yyy.yyy.yyy.yyy Set the network address information for an external print server. Note: This menu is available only when the printer is attached to an external print server through the USB port. ENA Netmask yyy.yyy.yyy.yyy Set the netmask information for an external print server. ...

Use To Device ‑ Initiated E ‑ mail NoneUse Device SMTP Credentials Specify what credentials will be used when communicating to the SMTPserver. Notes: • None is the factory default setting for Device ‑ Initiated E ‑ mail and User ‑ Initiated E ‑ mail. • “Device Userid” and “Device password” are used ...

Confidential Print menu Use To Max Invalid PIN Off2–10 Limit the number of times an invalid PIN can be entered. Notes: • This menu appears only when a formatted, non-defective printer hard disk is installed. • Once the limit is reached, the print jobs for that user name and PIN are deleted. Confiden...

Use To Automatic Method Single passMultiple pass Mark all disk space used by a previous print job. This method does not permit the filesystem to reuse this space until it has been cleared. Notes: • “Single pass” is the factory default setting. • Only automatic wiping enables users to erase temporary...

Use To Time Zone [list of time zones] Select the time zone. Note: GMT is the factory default settings. Automatically observe DST OnOff Set the printer to use the applicable daylight saving time (DST) start and end timesassociated with the printer Time Zone setting. Note: On is the factory default se...

Use To Export Configuration Package Export Export the printer configuration package to a flash drive. Note: The configuration package cannot be exported unless a flash drive is attached to the printer. Copy Settings menu Use To Content Type TextGraphicsText/PhotoPhoto Specify the content of the orig...

Fax Settings menu Fax Mode (Analog Fax Setup) menu Analog Fax Setup mode sends the fax job through a telephone line. Note: The fax function is available only in select printer models. Use To Fax Name Specify the name of the fax in the printer. Fax Number Specify the number assigned to the fax. Fax I...

Use To Ringer Volume OffOn Control the fax speaker ringer volume. Note: On is the factory default setting. Use To All RingsSingle Ring OnlyDouble Ring OnlyTriple Ring OnlySingle or Double Rings OnlySingle or Triple Rings OnlyDouble or Triple Rings Only Specify ring patterns when the printer is answe...

Use To Use cc:/bcc: OffOn Enable the use of the cc and bcc fields. Note: Off is the factory default setting. FTP Settings menu Use To Format PDF (.pdf)Secure PDF (.pdf)TIFF (.tif)JPEG (.jpg)XPS (.xps) Specify the format of the file for FTP sending. Note: PDF (.pdf) is the factory default setting. PD...

Flash Drive menu Use To Format PDF (.pdf)Secure PDFTIFF (.tif)JPEG (.jpg)XPS (.xps) Specify the format of the file to be sent through FTP. Note: “PDF (.pdf)” is the factory default setting. PDF Version 1.2–1.7A–1a Set the version of the PDF file to be sent through FTP. Note: 1.5 is the factory defau...

Paper Saver Ordering HorizontalReverse HorizontalReverse VerticalVertical Specify the positioning of multiple ‑ page images. Notes: • Horizontal is the factory default setting. • Positioning depends on the number of page images and whether they are in portrait or inlandscape orientation. Separator S...

Finishing menu Use To Sides (Duplex) 1 sided2 sided Specify whether two ‑ sided (duplex) printing is set as the user default setting for all print jobs. Notes: • “1 sided” is the factory default setting. • You can set two ‑ sided printing from the software program. For Windows users: Click File >...

Use To Paper Saver Off2 ‑ Up 3 ‑ Up 4 ‑ Up 6 ‑ Up 9 ‑ Up 12 ‑ Up 16 ‑ Up Print multiple pages on one sheet of paper. Notes: • Off is the factory default setting. • When the number of pages per sheet is selected, each page is scaled so thatthe number of pages you want can be displayed on the sheet. P...

Use To Enhance Fine Lines OnOff Enable a print mode preferable for files such as architectural drawings, maps, electricalcircuit diagrams, and flow charts. Notes: • Off is the factory default setting. • You can set this option from the printer software. For Windows users, click File > Print , and...

Use To Disk Near Full Action NoneE ‑ mail Current Log E ‑ mail & Delete Current Log E ‑ mail & Delete Oldest Log Post Current LogPost & Delete Current LogPost & Delete Oldest LogDelete Current LogDelete Oldest LogDelete All LogsDelete All But Current Determine and set how the printer...

HTML menu Use To Font Name Albertus MTAntique OliveApple ChanceryArial MTAvant GardeBodoniBookmanChicagoClarendonCooper BlackCopperplateCoronetCourierEurostileGaramondGenevaGill SansGoudyHelveticaHoefler TextIntl CG TimesIntl CourierIntl Univers Joanna MTLetter GothicLubalin GraphMarigoldMonaLisa Re...

Use To Margin Size 8–255 mm Set the page margin for HTML documents. Notes: • 19 mm is the factory default setting. • Margin size can be increased in 1 ‑ mm increments. Backgrounds Do Not PrintPrint Specify whether to print backgrounds on HTML documents. Note: Print is the factory default setting. Im...

Saving money and the environment Lexmark is committed to environmental sustainability and is continually improving its printers to reduce their impacton the environment. We design with the environment in mind, engineer our packaging to reduce materials, and providecollection and recycling programs. ...

Avoid paper jams Correctly set the paper type and size to avoid paper jams. For more information, see “Avoiding jams” on page 226. Saving energy Using Eco ‑ Mode 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home ...

Use To On Reduce printer noise. Notes: • Print jobs are processed at a reduced speed. • Printer engine motors do not start until a documentis ready to print. There will be a short delay beforethe first page is printed. Off Use factory default settings. Note: This setting supports the performance spe...

Using Hibernate Mode Hibernate is an ultra ‑ low power operating mode. When operating in Hibernate mode, the printer is essentially off, and all other systems and devices are powered down safely. Note: The Hibernate and Sleep modes can be scheduled. Using the Embedded Web Server 1 Open a Web browser...

Using the printer control panel 1 From the home screen, navigate to: > Settings > General Settings > Screen Brightness 2 In the Screen Brightness field, enter the brightness percentage you want for the display. 3 Touch . Recycling Lexmark provides collection programs and environmentally pro...

Securing the printer Statement of Volatility Your printer contains various types of memory that can store device and network settings, and user data. Types of memory Description Volatile memory Your printer uses standard Random Access Memory (RAM) to temporarily buffer user data during simple print ...

• Disk wiping can take from several minutes to more than an hour, during which the printer will be unavailablefor other user tasks. 5 Touch Back > Exit Config Menu . The printer will perform a power ‑ on reset, and then return to normal operating mode. Configuring printer hard disk encryption Ena...

• A status bar will indicate the progress of the disk wiping task. After the disk has been encrypted, the printerwill return to the Enable/Disable screen. 5 Touch Back > Exit Config Menu . The printer will perform a power ‑ on reset, and then return to normal operating mode. Finding printer secur...

Maintaining the printer Warning—Potential Damage: Failure to maintain optimum printer performance, or to replace parts and supplies, may cause damage to your printer. Cleaning the printer parts Cleaning the printer Note: You may need to perform this task after every few months. Warning—Potential Dam...

Cleaning the scanner glass Clean the scanner glass if you encounter print quality problems, such as streaks on copied or scanned images. 1 Slightly dampen a soft, lint-free cloth or paper towel with water. 2 Open the scanner cover. 3 Clean all the areas shown, and then let them dry. 1 White undersid...

Checking the status of parts and supplies Checking the status of parts and supplies on the printer control panel From the home screen, touch Status/Supplies > View Supplies . Checking the status of parts and supplies from the Embedded Web Server Note: Make sure the computer and the printer are co...

Ordering toner cartridges Notes: • Estimated cartridge yield is based on the ISO/IEC 19752 standard. • Extremely low print coverage for extended periods of time may negatively affect actual yield. Item Return Program cartridge For the United States and Canada Toner Cartridge 601 High Yield Toner Car...

Ordering an imaging unit Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to exhaustion oftoner from toner cartridge. For more information on replacing the imaging unit, see the instruction sheet that came with the supply. Part name Lexmark Return ...

Replacing supplies Replacing the toner cartridge 1 Press the button on the right side of the printer, and then open the front door. 2 1 2 Pull the toner cartridge out using the handle. 3 Unpack the toner cartridge, and then remove all packing materials. 4 Shake the new cartridge to redistribute the ...

5 Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side railsinside the printer. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problem...

Moving the printer CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely. Before moving the printer CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damag...

Managing the printer Finding advanced networking and administrator information This chapter covers basic administrative support tasks using the Embedded Web Server. For more advanced systemsupport tasks, see the Networking Guide on the Software and Documentation CD or the Embedded Web Server — Secur...

Restoring factory default settings If you want to keep a list of the current menu settings for reference, then print a menu settings page before restoringthe factory default settings. For more information, see “Printing a menu settings page” on page 56. If you want a more comprehensive method of res...

Clearing jams By carefully selecting paper and specialty media and loading it properly, you should be able to avoid most jams. If jamsoccur, then follow the steps outlined in this chapter. Warning—Potential Damage: Never use any tool to remove a jam. Doing so could permanently damage the fuser. Avoi...

• Do not slide the paper into the tray. Load paper as shown in the illustration. • Make sure the guides in the tray or the multipurpose feeder are properly positioned and are not pressing tightlyagainst the paper or envelopes. • Push the tray firmly into the printer after loading paper. Use recommen...

Troubleshooting Understanding printer messages Cartridge low [88.xy] You may need to order a toner cartridge. If necessary, select Continue on the printer control panel to clear the message and continue printing. For non ‑ touch ‑ screen printer models, press to confirm. Cartridge nearly low [88.xy]...

From the printer control panel, select Continue to clear the message. For non-touch-screen printer models, press to confirm. Complex page, some data may not have printed [39] Try one or more of the following: • From the printer control panel, select Continue to ignore the message and continue printi...

Fax partition inoperative. Contact system administrator. Try either of the following: • From the printer control panel, select Continue to clear the message. For non ‑ touch ‑ screen printer models, press to confirm. • Turn the printer off, and then turn it back on. If the message appears again, the...

Imaging unit very low, [x] estimated pages remain [84.xy] You may need to replace the imaging unit very soon. For more information, see the "Replacing supplies" section of the User’s Guide . If necessary, select Continue on the printer control panel to clear the message and continue printing...

Insufficient memory to collate job [37] Try one or more of the following: • From the printer control panel, select Continue to print the part of the job already stored and begin collating the rest of the print job. For non ‑ touch ‑ screen printer models, press to confirm. • Cancel the current print...

Memory full, cannot print faxes From the printer control panel, select Continue to clear the message without printing. For non ‑ touch ‑ screen printer models, press to confirm. Note: Held faxes will attempt to print after the printer restarts. Memory full, cannot send faxes 1 From the printer contr...

For non ‑ touch ‑ screen printer models, press and on the printer control panel simultaneously for 15 seconds to clear the message and continue printing. If you do not wish to accept these risks, then remove the third-party supply or part from your printer, and then installa genuine Lexmark supply o...

Remove paper from standard output bin Remove the paper stack from the standard bin. The printer automatically detects paper removal and resumes printing. If removing the paper does not clear the message, then select Continue on the printer control panel. For non-touch- screen printer models, press t...

• The x and y values must match for printing to continue. Replace defective imaging unit [31.xy] Replace the defective imaging unit to clear the message. For more information, see the instruction sheet that camewith the supply or see the “Replacing supplies” section of the User’s Guide . Note: If yo...

Replace unsupported imaging unit [32.xy] Remove the imaging unit, and then install a supported one to clear the message and continue printing. For moreinformation, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide . Note: If you do not ha...

Serial option [x] error [54] Try one or more of the following: • Make sure that the serial cable is properly connected and is the correct one for the serial port. • Make sure that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printerand computer. • ...

Supply needed to complete job Do either of the following: • Install the missing supply to complete the job. • Cancel the current job. Too many flash options installed [58] 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the extra flash memory. 4 Connect the power...

Basic printer problems The printer is not responding Action Yes No Step 1 Make sure the printer is turned on. Is the printer turned on? Go to step 2. Turn on the printer. Step 2 Check if the printer is in Sleep mode or Hibernate mode. Is the printer in Sleep mode or Hibernate mode? Press the Sleep b...

Action Yes No Step 8 Check if one end of the printer cable is plugged into a port on the printerand the other to the computer, print server, option, or other networkdevice. Is the printer cable securely attached to the printer and the computer,print server, option, or other network device? Go to ste...

Hardware and internal option problems Cannot detect internal option Action Yes No Step 1 Turn off the printer, then wait for about 10 seconds, and then turn on theprinter. Does the internal option operate correctly? The problem is solved. Go to step 2. Step 2 Check if the internal option is properly...

Action Yes No Step 2 Check the cable and the ISP connection. a Use the correct cable, and then make sure it is securely connected tothe ISP. b Check if the ISP solution interface cable is securely connected into thereceptacle of the controller board. Note: The ISP solution interface cable and the re...

Action Yes No Step 4 Check if the tray is available in the printer driver. Note: If necessary, manually add the tray in the printer driver to make it available for print jobs. For more information, see “Updating availableoptions in the printer driver” on page 47. Is the tray available in the printer...

Paper frequently jams Action Yes No Step 1 a Pull out the tray, and then do one or more of the following: • Make sure paper lies flat in the tray. • Check if the paper size indicators on the paper guides are alignedwith the paper size indicators on the tray. • Check if the paper guides are aligned a...

Solving print problems Printing problems Confidential and other held jobs do not print Note: Confidential, Verify, Reserve, and Repeat print jobs may be deleted if the printer requires extra memory to process additional held jobs. Action Yes No Step 1 Open the held jobs folder on the printer display...

Error message about reading the flash drive appears Action Yes No Step 1 Check if the flash drive is inserted into the front USB port. Note: The flash drive will not work if it is inserted into the rear USB port. Is the flash drive inserted into the front USB port? Go to step 2. Insert the flash dri...

Job prints from the wrong tray or on the wrong paper Action Yes No Step 1 a Check if you are printing on paper that is supported by the tray. b Resend the print job. Did the job print from the correct tray or on the correct paper? The problem is solved. Go to step 2. Step 2 a From the Paper menu on ...

Action Yes No Step 3 Reduce the complexity of the print job by eliminating the number and sizeof fonts, the number and complexity of images, and the number of pagesin the job. Did the job print and collate correctly? The problem is solved. Contact customer support . Multiple ‑ language PDF files do ...

Action Yes No Step 2 a Replace the fuser. For more information on installing the fuser, seethe instruction sheet that came with the part. b Resend the print job. Does the print speed increase? The problem is solved. Contact customer support . Print jobs do not print Action Yes No Step 1 a From the d...

Action Yes No Step 6 a Remove, and then reinstall the printer software. For moreinformation, see “Installing the printer software” on page 46. Note: The printer software is available at http://support.lexmark.com . b Resend the print job. Do the jobs print? The problem is solved. Contact customer su...

Action Yes No Step 5 a Check if the cable connections to the printer and print server aresecure. For more information, see the setup documentation that camewith the printer. b Resend the print job. Did the job print? The problem is solved. Go to step 6. Step 6 Install additional printer memory, and ...

Unexpected page breaks occur Action Yes No Increase the printing timeout. a From the home screen, navigate to: > Settings > General Settings > Timeouts b Increase the Print Timeout setting, and then touch Submit . c Resend the print job. Did the file print correctly? The problem is solved. ...

Clipped pages or images Leading edge Trailing edge ABCDEABCDEABCDE Action Yes No Step 1 a Move the width and length guides in the tray to the correct positionsfor the paper loaded. b Resend the print job. Is the page or image clipped? Go to step 2. The problem is solved. Step 2 From the printer cont...

Compressed images appear on prints Note: Printing on letter-size paper using a 220-volt fuser compresses images. Action Yes No Step 1 a Make sure the size of the paper loaded in the tray matches the fusertype. Note: Use a 110-volt fuser for printing on letter-size paper and a 220-volt fuser for prin...

Action Yes No Step 3 Reinstall the toner cartridge. a Remove the cartridge. b Install the cartridge. c Resend the print job. Did the background disappear from the prints? The problem is solved. Go to step 4. Step 4 Check if off-white background is selected. a Depending on your operating system, set ...

Action Yes No Step 3 a Redistribute the toner in the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure tolight may cause print qu...

Action Yes No Step 3 a Depending on your operating system, specify the paper size fromPrinting Preferences or from the Print dialog. b Resend the print job. Are the margins correct? The problem is solved. Contact customer support . Paper curl Action Yes No Step 1 Move the width and length guides in ...

Print irregularities ) ) ABCDE ABCDE ABCDE Leading edge Trailing edge Action Yes No Step 1 a Move the width and length guides in the tray to the correct positionsfor the size of the paper loaded in the tray. b Resend the print job. Do print irregularities still appear? Go to step 2. The problem is s...

Print is too dark Action Yes No Step 1 a From the Quality menu on the printer control panel, reduce the tonerdarkness. Note: 8 is the factory default setting. b Resend the print job. Is the print still too dark? Go to step 2. The problem is solved. Step 2 a From the printer control panel, set the pa...

Action Yes No Step 5 a Load paper from a fresh package. Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it. b Resend the print job. Is the print still too dark? Go to step 6. The problem is solved. Step 6 Replace the imaging unit, and then resend ...

Action Yes No Step 4 Make sure that the paper has no texture or rough finishes. Are you printing on textured or rough paper? From the printercontrol panel, changethe texture settings inthe Paper Texturemenu to match thepaper you are printingon. Go to step 5. Step 5 a Load paper from a fresh package....

Action Yes No Step 1 a Check if there is packing material left on the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. 2 Check if the packing material is properly removed from the imagingunit. Warning—Potential Damage: Do not expose the imaging unit to direct light for more tha...

Action Yes No Step 1 a Reinstall the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure tolight may cause print quality problems. 2 Install the imaging unit, and t...

Shadow images appear on prints A B C DA B C D A B C DA B C D Leading edge Trailing edge Action Yes No Step 1 Load paper with the correct paper type and weight in the tray. Is paper with the correct paper type and weight loaded in the tray? Go to step 2. Load paper with thecorrect paper type andweigh...

Action Yes No Step 1 a Move the width and length guides in the tray to the correct positionsfor the size of the paper loaded. b Resend the print job. Is the print still skewed? Go to step 2. The problem is solved. Step 2 a Check if you are printing on a paper that is supported by the tray. b Resend ...

Action Yes No Step 4 a Reinstall the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure tolight may cause print quality problems. 2 Install the imaging unit, and t...

Action Yes No Step 3 a Load paper from a fresh package. Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it. b Resend the print job. Do streaked vertical lines appear on prints? Go to step 4. The problem is solved. Step 4 a Reinstall the imaging un...

Toner rubs off Leading edge Trailing edge ABC DEF Action Yes No Step 1 From the Paper menu on the printer control panel, check the paper typeand weight. Do the paper type and texture match the paper loaded in the tray? Go to step 2. Specify the paper typeand weight from thetray settings to matchthe ...

Uneven print density Action Yes No Replace the imaging unit, and then resend the print job. Is the print density uneven? Contact customer support . The problem is solved. Vertical voids appear on prints Leading edge Trailing edge Action Yes No Step 1 a Make sure your software program is using a corr...

Action Yes No Step 4 a Redistribute the toner in the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure tolight may cause print qu...

Partial document or photo copies Action Yes No Step 1 Check the placement of the document or photo. Make sure the document or photo is loaded facedown on the scannerglass in the upper left corner. Is the document or photo loaded correctly? Go to step 2. Place the document orphoto facedown on thescan...

Action Yes No Step 9 Check for washed ‑ out or overexposed output. a From the Copy screen, adjust the settings of the following: • Background Removal —Reduce the current setting. • Darkness —Increase the current setting. b Resend the copy job. Do pages show washed ‑ out or overexposed prints? Contac...

Caller ID is not shown Action Yes No Contact your telephone company to check if your telephone line issubscribed to the caller ID service. Notes: • If your region supports multiple caller ID patterns, then you mayhave to change the default setting. There are two settingsavailable: FSK (pattern 1) an...

Action Yes No Step 8 Temporarily disconnect other equipment (such as answering machines,computers with modems, or telephone line splitters) between the printerand the telephone line, and then try sending or receiving a fax. Can you send or receive a fax? The problem is solved. Go to step 9. Step 9 a...

Action Yes No Step 2 Load the original document properly. Load the original document faceup, short edge first into the ADF trayor facedown on the scanner glass in the upper left corner. Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine cli...

Action Yes No Step 3 Replace the toner cartridge. For more information, see the instructionsheet that came with the supply. Can you receive faxes? The problem is solved. Contact customer support . Fax and e-mail functions are not set up Notes: • Before you troubleshoot, check if the fax cables are c...

Action Yes No Step 2 Decrease the incoming fax transmission speed. a Open a Web browser, and then type the printer IP address in theaddress field. Notes: • View the printer IP address on the printer home screen. The IPaddress appears as four sets of numbers separated by periods,such as 123.123.123.1...

Cannot scan from a computer Action Yes No Step 1 Make sure the printer is turned on and that Ready appears on the printer display before scanning a job. Does Ready appear before scanning the job? Go to step 3. Go to step 2. Step 2 Turn off the printer, then wait for about 10 seconds, and then turn t...

Action Yes No Step 3 Clean the scanner glass and the ADF glass using a clean, lint ‑ free cloth dampened with water. Is the scanner glass clean? Go to step 4. See “Cleaning thescanner glass” onpage 214. Step 4 Check the placement of the document or photo. Make sure the document or photo is loaded fa...

The scanner does not respond Action Yes No Step 1 Check if the printer is turned on. Is the printer turned on? Go to step 2. Turn on the printer. Step 2 Check if the printer cable is securely attached to the printer and thecomputer, print server, option, or other network device. Is the printer cable...

Solving home screen applications problems An application error has occurred Action Yes No Step 1 Check the system log for relevant details. a Open a Web browser, and then type the printer IP address in theaddress field. If you do not know the IP address of the printer, then you can: • View the IP ad...

Contacting customer support When you contact customer support, you will need to be able to describe the problem you are experiencing, the messageon the printer display, and the troubleshooting steps you have already taken to find a solution. You need to know your printer model type and serial number...

Notices Product information Product name: Lexmark MX410de, MX510de, MX511de, MX511dhe Machine type: 7015 Model(s): 470, 630, 670, 675 Edition notice May 2013 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROV...

Trademarks Lexmark, Lexmark with diamond design, and MarkVision are trademarks of Lexmark International, Inc., registered inthe United States and/or other countries. Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries. PCL® is a registered trademark of the H...

Note: Some modes may not apply to your product. 1-meter average sound pressure, dBA Printing 53 dBA (MX410); 54 dBA (MX510,MX511) Scanning 45 dBA Copying 55 dBA Ready N/A Values are subject to change. See www.lexmark.com for current values. Temperature information Ambient operating temperature 15.6 ...

DANGER - Invisible laser radiation when cartridges are removed and interlock defeated. Avoid exposure to laser beam.PERIGO - Radiação a laser invisível será liberada se os cartuchos forem removidos e o lacre rompido. Evite a exposição aos feixes de laser. Opasnost - Nevidljivo lasersko zra č enje ka...

Sleep Mode This product is designed with an energy-saving mode called Sleep Mode . The Sleep Mode saves energy by lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged after this productis not used for a specified period of time, called the Sleep M...

Licensing notices All licensing notices associated with this product can be viewed from the root directory of the installation software CD. 日本の VCCI 規定 製品にこのマークが表示されている場合、次の要件を満たしています。 この装置は、クラス B 情報技術装置です。この装置は、家庭環境で使用することを目的としていますが、この 装置がラジオやテレビジョン受信機に近接して使用されると、受信障害を引き起こすことがあります。取扱説明書に従って正しい取り扱いを...

The Ringer Equivalence Number (REN) is used to determine the number of devices that may be connected to a telephoneline. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In mostbut not all areas, the sum of RENs should not exceed five (5.0). T...

recommended that the customer install an appropriate AC surge arrestor in the AC outlet to which this device isconnected. An appropriate AC surge arrestor is defined as one that is suitably rated, and certified by UL (Underwriter’sLaboratories), another NRTL (Nationally Recognized Testing Laboratory...

Compliance is indicated by the CE marking. The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA.The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, MillenniumTower III, 1095 Budapest H...

This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, fromLexmark or a Lexmark Remarketer, referred to in this statement as “Remarketer.” Limited warranty Lexmark warrants that this product: —Is manufactured from new parts, or new and ser...

Extent of limited warranty Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of printsproduced by any product. Warranty service does not include repair of failures caused by: —Modification or unauthorized attachments —Accidents, misuse, abus...

Patent acknowledgment The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual PropertyRights (IPR) Disclosure of Certicom Corp. at the IETF for Elliptic Curve Cryptography (ECC) Cipher Suites for TransportLayer Security (TLS) implemented in the p...

Index Numerics 250 ‑ sheet tray installing 42 550 ‑ sheet tray installing 42 Symbols [x] ‑ page jam, clear manual feeder. [25y.xx] 236[x] ‑ page jam, clear standard bin. [20y.xx] 233[x] ‑ page jam, open automatic feeder top cover. [28y.xx] 237[x] ‑ page jam, open front door. [20y.xx] 229[x] ‑ page j...