Leica DISTO D2- Manuals

Page 4 - User Manual; English; Symbols used in this manual; Intended Use; Permitted uses

1 Symbols used in this manual Leica DISTO™ D2 762202b gb D GB F I E P NL CN User Manual English Congratulations on the purchase of your Leica DISTO™ D2. The safety instructions and the user manual should be read through carefully before you use the product for the first time. The person responsible ...

Page 5 - Limits of use; Overview; Keyboard

2 Overview Leica DISTO™ D2 762202b gb D GB F I E P NL CN Limits of use ) Also see section "Technical data". The Leica DISTO™ is designed for use in areas perma-nently habitable by humans, do not use the product in explosion hazardous areas or in aggressive envi-ronments. Responsibilities Res...

Page 6 - Display; Start up; Inserting / Replacing Batteries; Operation; Measuring Conditions; Range; Hazards of Use

3 Start up Leica DISTO™ D2 762202b gb D GB F I E P NL CN Display See drawing { B } 1 Laser "ON" 2 Reference (front/rear/end piece) 3 Pythagoras 4 Timer (self-triggering) 5 Historical memory 6 Area/volume 7 Battery status 8 Units with exponents ( 2 / 3 ) 9 Intermediate line 2 10 Intermediate ...

Page 7 - Setting the instrument

4 Operation Leica DISTO™ D2 762202b gb D GB F I E P NL CN abnormal use, and before, during and after important measurements.Make sure the Leica DISTO™ optic is kept clean and that there is no mechanical damage to the bumpers.  CAUTION: In using the instrument for distance measure- ments or for posi...

Page 8 - Measuring; Single Distance Measurement; Continuous measurement; Functions; Addition / Subtraction

5 Measuring Leica DISTO™ D2 762202b gb D GB F I E P NL CN the stop bracket with a little force to the right side; the stop bracket can now be completely unfolded. See drawing { E }.  CAUTION: Make sure that when measuring from the unfolded endpiece, the measuring reference is set to "End piece&...

Page 9 - Area function; Adding and subtracting areas; Volume function

6 Functions Leica DISTO™ D2 762202b gb D GB F I E P NL CN 1x briefly: the next measurement is subtracted from the previous one. Repeat this procedure for as many times as required. The result is displayed in the summary row, the previ-ously measured value is displayed in intermediate line 2, the val...

Page 10 - Stake out function

7 Functions Leica DISTO™ D2 762202b gb D GB F I E P NL CN • All target points must be vertical or horizontal on the surface of the wall. • The best results are achieved when the intrument is rotated around a fixed point (e.g. the stop bracket is fully extended and the instrument is placed against a ...

Page 11 - Historical memory; Using stored values in functions

8 Functions Leica DISTO™ D2 762202b gb D GB F I E P NL CN value 1.000 m). This value can be adjusted to the desired stake out distance. The value is increased. The value is reduced. Holding the button down accelerates the speed at which the value changes. 1x briefly: starts continuous measurement. I...

Page 12 - Switching off the beep; Appendix; Display Notices

9 Appendix Leica DISTO™ D2 762202b gb D GB F I E P NL CN Switching off the beep Press and hold simultaneously for 5 seconds: The beep is switched off. To reactivate it, press and hold for 5 seconds. Appendix Display Notices All display notices are either displayed with or "Error". The follow...

Page 13 - Laser classification

10 Appendix Leica DISTO™ D2 762202b gb D GB F I E P NL CN * Use a target plate to increase the measurement range during daylight or if the target has poor reflection properties!** in favourable conditions (good target surface properties, room temperature) up to 10 m. In unfavourable conditions, such...

Page 14 - Labelling; Care; Disposal

11 Appendix Leica DISTO™ D2 762202b gb D GB F I E P NL CN Labelling For the position of the type plate see drawing { J }. Care Wipe off dirt with a damp, soft cloth. Do not immerse the instrument in water. Do not use aggressive cleaning agents or solutions. Warranty The Leica DISTO™ D2 comes with a ...