Leica TPS800 DXF Export- User Manual

Leica TPS800 DXF Export– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

A number of DXF output options are supplied to give different solutions.

Both 2D and 3D output formats are included.

The Format Manager used to create these DXF Data Outputs does not have any
arithmetic or branching functionality so that text information is always written to the
right of the point with the text ‘hot spot’ at the same location as the point. In some of
the outputs, text is written to a single Layer with the text in a single line. In others, the
text is on different Layers, but written as described above, so that if all the Layers are
switched on together, the text appears to overwrite.

The

TPS400

and

TPS800

Data Output option does not have the capacity to hold the

large amount of records to be found in a DXF file Header. The Header portion of a
DXF file usually contains information relating to the limits of the data calculated from
the co-ordinates contained in the data set. As this is not possible with the

TPS400

and

TPS800

Data Output it is likely that you will not immediately see your data when it is

imported into AutoCAD

, or your CAD package. Use

View

Zoom

Extents

, or the

equivalent in your CAD package, to see the data. If the data appears very small, or
against the edge of your screen, you may also need to use the

Pan

and

Window

options to obtain the optimum view of your data.

dxf3DP

This option creates a

DXF file of the measured points, which are placed in a layer

called

Point,

using a cross symbol named

CROSS

dxf3DPC

This option creates a

DXF file of the measured points, which are placed in a layer

called

Point,

using a cross symbol. The Point Numbers are placed in the layer

Pt_no

and the Codes, recorded in Code field in the Codelist, are placed in the layer

Code

There is not sufficient scope to move the text fields so both the Point Number and
Code are placed adjacent to the cross but on different layers.

PointId

Code

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - dxf2DPC; Code

TPS400 and TPS800 DXF Data Output Page 2 dxf3DP+C This option creates a 3D DXF file of the measured points, which are placed in a layer called Point, using a cross symbol. The Point Numbers and the Codes, recorded in Code field in the Codelist, are placed in the layer Code . A space is placed in fro...

Page 3 - dxf3DH; Height; Height; PointId Height; Height; Height; PointId Height

TPS400 and TPS800 DXF Data Output Page 3 dxf3DH This option creates a 3D DXF file of the measured points, which are placed in a layer led Point, with 3D co-ordinates as a dot. The Height is placed in the layer Height . cal . Height dxf3DPH This option creates a 3D DXF file of the measured points, wh...

Page 4 - PLP; PointId; Point

TPS400 and TPS800 DXF Data Output Page 4 e.g. + 27,PLP,1106.525,1098.584,102.885 is the text written against a point with: Point Number 27 Code PLP Eastings 1106.525m Northings 1098.584m Height 102.885m dxf400800 This option creates a 3D DXF file of the measured points, which are placed in a layer c...

Leica TPS800 DXF Export- User Manual

Table of Contents:

Summary

Other Leica Models