Page 2 - Leica DISTO; Table of Contents
Leica DISTO TM D810 touch 799093a 1 EN Table of Contents Instrument Set-up - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
Page 3 - Introduction; The symbols used have the following meanings:; Overview; Display
Leica DISTO TM D810 touch 799093a 2 EN Instrument Set-up Introduction The safety instructions and the user manual should be read through carefully before the product is used for the first time. The person responsible for the product must ensure that all users understand these directions and adhere t...
Page 4 - Basic measuring screen
Leica DISTO TM D810 touch 799093a 3 EN Instrument Set-up Basic measuring screen Status bar Favorites Main line Active function Tap here to start ON/DIST in a dis- tance function Selection screen FUNC Settings Function / Settings Help function
Page 6 - Charging the Li-Ion battery via USB; It is not possible; When you charge the battery, the following icons show the status:; Charging
Leica DISTO TM D810 touch 799093a 5 EN Instrument Set-up Charging the Li-Ion battery via USB Charge the battery before using it for the first time. Use the provided cable to charge the battery. Plug the small end of the cable into the port of the device, and plug the end of the charger into an elect...
Page 7 - Operations; Using the Touch Screen; Tapping; Spread 2 fingers apart to zoom
Leica DISTO TM D810 touch 799093a 6 EN Operations Using the Touch Screen i Use only fingers to use the touch screen.Do not allow the touch screen to come into contact with other elec-trical devices.Electrostatic discharges can cause the touch screen to malfunction.Do not allow the touch screen to co...
Page 8 - Clear; ON; Multifunctional endpiece
Leica DISTO TM D810 touch 799093a 7 EN Operations Switching ON/OFF Clear Message Codes ON OFF 2 sec Device is turned OFF. i If no key is pressed for 180 sec, the device switches off au-tomatically. 1x Undo last action. 2x Leave actual func-tion, go to default operation mode. If the info icon appears...
Page 9 - added; from the; OV
Leica DISTO TM D810 touch 799093a 8 EN Operations Add / Subtract 7.332 m 1 The next meas-urement is added to the previous one. 2 The next meas-urement is sub- tracted from the previous one. 2x 7.332 m 12.847 m 3 20.179 m 4 i This process can be repeated as required. The same process can be used for ...
Page 10 - Screenshot; Screenshot photo is saved in gallery.
Leica DISTO TM D810 touch 799093a 9 EN Operations Screenshot 1x 0.00 m 1 2 sec Screenshot photo is saved in gallery.
Page 11 - Settings
Leica DISTO TM D810 touch 799093a 10 EN Settings Overview 1 2 Tilt units Distance units Beep Digital level Keypad lock Tilt calibration Favorites Illumination Offset ResetInformation Bluethooth ® Smart Date and Time Compass adjustment Touch screen Country Information Tilt units 1 2 360.0° ± 180.0° ±...
Page 12 - Distance units
Leica DISTO TM D810 touch 799093a 11 EN Settings Distance units 1 2 0.00 m 0.000 m 0.0000 m 0.0 mm 0.00 ft0.00 in0 in 1/320'00" 1/32 0.00 m 0.000 m 0.0000 m 0.0 mm 0.00 ft 0'00" 1/32 0'00" 1/16 0'00" 1/8 0'00" 1/4 0.00 in 0 in 1/32 0 in 1/16 0 in 1/8 0 in 1/4 0.000 yd Art. No. 79...
Page 13 - Switch on with keylock
Leica DISTO TM D810 touch 799093a 12 EN Settings Beep ON/OFF 1 ON 2 To switch ON, repeat procedure. OFF Exit settings. 3 Digital level ON/OFF 1 ON 2 To switch ON, repeat procedure. OFF Exit settings. 3 i The digital level is displayed in the status bar. De-/Activate keylock Switch on with keylock 1 ...
Page 14 - Bluetooth; OFF; OFF
Leica DISTO TM D810 touch 799093a 13 EN Settings Bluetooth ® Settings 1 ON OFF OFF 2 OFF Explanation see info box below. Special Settings for data transfer. Exit settings. 3 i Default mode: Bluetooth ® is switched on and black Bluetooth ® icon is displayed in status bar. Blue Bluetooth ® icon in sta...
Page 15 - Calibration of tilt sensor (Tilt Calibration); Place device on absolutely flat surface.
Leica DISTO TM D810 touch 799093a 14 EN Settings Calibration of tilt sensor (Tilt Calibration) 1 2 3 Place device on absolutely flat surface. 180° 4 180° 5 Turn the device horizontally by 180° and place it again on absolutely flat surface. 6 7 Place device on absolutely flat surface. 180° 8 180° 9 T...
Page 16 - Personalized favorites; Illumination
Leica DISTO TM D810 touch 799093a 15 EN Settings Personalized favorites 1 Favorite 2 3 Select favorite function. 4 Press selection key left or right. Function is set as favorite above the corresponding se-lection key. i Select your favorite functions for quick access. Short cut:Press 2 sec on a sele...
Page 17 - Date and Time; Adjusting the magnetic declination; Confirm
Leica DISTO TM D810 touch 799093a 16 EN Settings Date and Time 1 2 00 : 00 3 Set time (hh:mm) 2013-04-08 4 Set date (yyyy-mm-dd) Exit settings. 5 Compass Adjustment i Depending on your geographic location, the angle of declination may vary from other locations, as the geographic and magnetic poles a...
Page 18 - Offset
Leica DISTO TM D810 touch 799093a 17 EN Settings Offset 1 2 1.012 m 3 Select digit. 1.012 m 4 Adjust digit. 5 Approve value. Exit settings. 6 i An offset adds or subtracts a specified value automatically to or from all measurements. This func-tion allows tolerances to be taken into account. The offs...
Page 19 - Functions
Leica DISTO TM D810 touch 799093a 18 EN Functions Overview Timer Calculator Adjusting measuring reference Memory Sinlge Distance Measurement Level Volume Smart Horizontal Mode Photo Compass Gallery Area Triangle Area Long Range Mode Height-profile Measurement Measuring on sloped objects Height Track...
Page 20 - Calculator
Leica DISTO TM D810 touch 799093a 19 EN Functions Calculator 1 2 C/CE = 3 Select key on display. Confirm every key. Use selection keys for clear or result. i The measurement result from the main line is taken over to the calcula-tor and can be used for further calcu-lations. Ft/in fractions are conv...
Page 21 - Memory; Short cut; Measuring single distance; Aim active laser at target.; Smart Horizontal Mode
Leica DISTO TM D810 touch 799093a 20 EN Functions Memory 1 2 8.449 m 8.449 m 3 Switch between measurements. Take over value for further actions. Delete memory. 4 Use Up/Down navigation keys to show more detailed results of the speci-fic measurement. i Short cut Measuring single distance 1 2 Aim acti...
Page 22 - Level; First distance
Leica DISTO TM D810 touch 799093a 21 EN Functions Level 1 2 0.3° 90° 0° 3 i Displays inclinations of 360° with a transverse inclination of +/- 10°. In-strument beeps at 0° and 90°. Ideal for horizontal or vertical adjustments. Area 1 2 3 Aim laser at first target point. 4 5 Aim laser at sec-ond targ...
Page 23 - Volume
Leica DISTO TM D810 touch 799093a 22 EN Functions Volume 1 2 3 Aim laser at first target point. 4 5 Aim laser at sec-ond target point. 6 7 Aim laser at third target point. 2.431 m 2.338 m 5.744 m 32.653 m 3 First distance Second distance Third distance Volume 8 16.164 m 39.300 m 2 13.430 m 2 9 Use U...
Page 24 - Photo
Leica DISTO TM D810 touch 799093a 23 EN Functions Photo 1 1x 2 OV * 2x 3 Take photo. 4 Exit. 5 i Tap on the camera icon in the mid-dle of the bottom line to take a pho-to.For screenshots, press camera key for 2 sec. * OV = Overview
Page 25 - Compass; Refuse; Calibration of Compass:
Leica DISTO TM D810 touch 799093a 24 EN Functions Compass 1 2 Calibrate Compass? Refuse Confirm 0.0°N The arrow always points to true north. 3 Check that mul-tifunctional end-piece is not folded out.Keep the device away from any magnet. 4 Exit. 5 i At the following places the compass probably does n...
Page 26 - Gallery
Leica DISTO TM D810 touch 799093a 25 EN Functions Gallery 1 1x 2 1x 2013 - 07 - 03_13:25 201 1x 2013 - 07 - 03_13:25 :25 1x 13 - 07 - 03_13:25 - 03_13: 0 3 - 07 _13:25 _13:25 7 1x 2013 - 07 - 03_13:25 3 Exit. 4 i If the device is connected to the computer via USB cable, you can download or delete th...
Page 27 - Triangular area; Long range mode
Leica DISTO TM D810 touch 799093a 26 EN Functions Triangular area 1 2 3 Aim laser at first target point. 4 5 Aim laser at sec-ond target point. 6 7 Aim laser at third target point. 4.855 m 2 2.425 m 4.129 m 4.248 m Triangular area 8 First distance Second distance Third distance 33.60° 10.802 m 9 Use...
Page 28 - Height-profile measurement
Leica DISTO TM D810 touch 799093a 27 EN Functions Height-profile measurement 1 2 REF 0 Aim at reference point (REF). 3 4 REF 1 0 2 3 4 5 h d Aim at additional points 1-x. 5 d h 2.042 m 0.054 m Horizontal distance to device Height difference to reference point (REF). 6 Exit function. 7 2x i Ideal for...
Page 29 - Sloped objects; P2 distance
Leica DISTO TM D810 touch 799093a 28 EN Functions Sloped objects 1 2 3 Aim laser at upper target point. 4 5 Aim laser at lower target point. 11.00 ° -3.440 m 30.367 m 5.452 m P2 distance Vertical height be-tween both points P2 angle Distance between both points 6 -4.230 m 39.10 ° 7 Use Up/Down navig...
Page 30 - Height tracking; Aim laser at lower point.; Px
Leica DISTO TM D810 touch 799093a 29 EN Functions Height tracking 1 2 P0 Px Aim laser at lower point. 3 4 P0 Px Aim laser at upper points and angle/ height tracking starts automatically. 5 x y P0 y 29.89 ° 6.271 m -10.55 ° 3.475 m P0 Px z 6 = Tracking height if device is turned on tripod = Tracking ...
Page 31 - Trapezium; Aim laser at upper point.
Leica DISTO TM D810 touch 799093a 30 EN Functions Trapezium 1 2 3 Aim laser at upper point. 4 5 Aim laser at 2nd point. x x y h y h 70.80 ° 5.790 m 13.459 m16.440 m 6 20.9 ° 78.383 m 2 7 Use Up/Down navigation keys to show more re-sults. Trapezium area
Page 32 - Stake out
Leica DISTO TM D810 touch 799093a 31 EN Functions Stake out i Two different distances (a and b) can be entered to mark off de-fined measured lengths. 1 2 3 a b b a = b 1 2 3 a b b a = b 1 2 1.012 m 3 Select digit. 1.012 m 4 Adjust digit. 5 Approve value "a". 0.625 m 6 Adjust value "b"...
Page 35 - Width; Distance to object
Leica DISTO TM D810 touch 799093a 34 EN Functions Width 1 -.--- m 1x 2 16.42m 3 It is absolutely necessary to aim with the laser per-pendicular to the object. OV * 1x 2x 4x 4 If necessary, use the Zoom for precise aiming. * OV = Overview 1x 16.42 m 5 Select arrows with the cursor keys or by tapping ...
Page 36 - Diameter
Leica DISTO TM D810 touch 799093a 35 EN Functions Diameter 1 -.--- m 1x 2 Ø 3 Aim laser perpendicular to the middle of the round object. OV * 1x 2x 4x 4 If necessary, use the Zoom for precise aiming. * OV = Overview 0.237 m 1x 5 Select arrows with the cursor keys or by tapping on the display and adj...
Page 37 - Area from Photo
Leica DISTO TM D810 touch 799093a 36 EN Functions Area from Photo 1 -.--- m 2 1x 2 3 Aim perpendicular to the horizontal center line of the ar-ea. This area must be perfectly flat on the vertical plane. OV * 1x 2x 4x 4 If necessary, use the Zoom for precise aiming. * OV = Overview 2.015m 9.232m 2 5 ...
Page 38 - Technical Data
Leica DISTO TM D810 touch 799093a 37 EN Technical Data * applies for 100 % target reflectivity (white painted wall), low background illumination, 25 ºC** applies for 10 to 100 % target reflectivity, high background illumination, - 10 ºC to + 50 ºC*** Tolerances apply from 0.05 m to 10 m with a confi...
Page 39 - Message Codes; If the message; Error; does not disappear; InFo; appears with a number,; Care; Clean the device with a damp, soft cloth.; Warranty; Lifetime Manufacturer's Warranty
Leica DISTO TM D810 touch 799093a 38 EN Message Codes If the message Error does not disappear after switching on the device repeatedly, contact the dealer.If the message InFo appears with a number, press the Clear button and observe the following instructions: Care • Clean the device with a damp, so...
Page 40 - Safety Instructions; Areas of responsibility; Limits of use
Leica DISTO TM D810 touch 799093a 39 EN Safety Instructions The person responsible for the instrument must ensure that all users understand these directions and adhere to them. Areas of responsibility Responsibilities of the manufacturer of the original equipment: Leica Geosystems AGHeinrich-Wild-St...
Page 41 - Disposal; Reorient or relocate the receiving antenna.
Leica DISTO TM D810 touch 799093a 40 EN Safety Instructions Disposal CAUTION Flat batteries must not be disposed of with household waste. Care for the environment and take them to the collection points provided in accordance with national or local regulations.The product must not be disposed with ...
Page 43 - Do not use the product in airplanes.; Laser classification; Laser Class 2 products:; Labelling
Leica DISTO TM D810 touch 799093a 42 EN Safety Instructions Use of the product with Blue-tooth ® WARNING Electromagnetic radiation can cause distur-bances in other equipment, in installations (e.g. medical ones such as pacemakers or hearing aids) and in aircraft. It can also affect humans and anim...