Page 2 - IMPORTANT SAFEGUARDS
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautionsshould always be followed, including the following:1. Read all instructions.2. Do not touch hot surfaces. Use handles or knobs.3. To protect against fire, electric shock and personal injury, do not immerse cord, plugs or ...
Page 3 - CAUTION; Michael Kramm, President; Customer Service
D. This appliance has a polarized plug (one blade is widerthan the other). As a safety feature, this plug will fit in apolarized outlet only one way. If the plug does not fit fully inthe outlet, reverse the plug. If it still does not fit, contact aqualified electrician. Do not attempt to defeat this...
Page 4 - Used Coffee Container
READ Y 1. Height-Adjustable Coffee Spout 2. Operating Buttons (See Fig. 3) 3. Removable Water Tank 4. Low Water Flotation Device (See Fig. 7.4) 5. Clearyl Water Care Cartridge* 6. Lid for Water Tank 7. Ground Coffee Funnel 8. Auto-Lid for Ground Coffee Funnel 9. Lid for Bean Container 10. Bean Conta...
Page 5 - READY
Fig. 6 Fig. 7 Fig. 8 Fig. 5 Fig. 9 4 5. Fig. 3 Grind Fineness Selector Fig. 4 a. Coffeeb. Steam / Water a b Steam/Water Selector READY c. d. e. f. g. h. On/Off P Button 1-Cup 2-Cup Rinse Steam a. Dial b. Display
Page 6 - Dual Frother Plus
Fig. 13 Fig. 14 Fig. 12 a b c Tip Metal Cylinder Clip-on Connector 6. Dual Frother Plus Fig. 10 Fig. 11 Fig. 12a
Page 8 - Table of Contents
Table of Contents 8. Important Safeguards ..........................................................2Jura-Capresso / Address Information .................................3Illustrations.......................................................................4–71. Product Registration......................
Page 11 - CUP ILLUMINATION; PREPARING THE MACHINE FOR THE FIRST TIME; Please note
All Display Messages Are Shown in RED 5. FACTORY SETTINGS Each machine leaves the factory with the following settings:Filter ..................... – (not installed)Hardness Level .... 2Aroma ................... ROBUSTTemperature .......... HIGHTime ...................... Not SetUnit On ................
Page 12 - Light roast; GRINDING AND BREWING
spout up and down a few times to clear the internal flow.You are now ready to make coffee. 7. ADDING COFFEE BEANS • Open the bean container lid (Fig. 1, 9), fill with beans (Fig. 5). The container holds approx. 220 grams (8 oz.). Close the lid. Frozen Beans : Thaw 3 to 4 hours before adding to bean ...
Page 16 - Attention
16a. INSTALLING & ACTIVATING THE CLEARYL WATER CARTRIDGE Important: Never install the cartridge before or during "Preparing Machine For The First Time."• Make sure the water tank is empty.• Remove cartridge from its bag and rinse cartridge under water.• Open water container lid and pull ...
Page 17 - Important
the filter and through the frother. Do not interrupt this process.This activates the filter. The machine will stop automatically. 4. CLOSE TAP . Turn the Water/Steam Dial back to the cup symbol. HEATING . READY . 17. ADJUSTING THE WATER HARDNESS Water is heated inside the machine. With use, this lea...
Page 22 - TIPS FOR BETTER COFFEE; Height adjustable coffee-spout; SUPPLIES AND ACCESSORIES
5. The displays still shows SOLVENT IN TANK / OPEN TAP . Turn the Steam/Water Selector to the water symbol. The machine will pump the mixture through the frother in intervals.During this procedure the display shows DECALC.ON . When this cycle is finished the display shows CLOSE TAP . 6. Turn the Ste...
Page 23 - RINSING
All supplies are available through: • The enclosed mail order form that came with your machine• Our toll free line at 1-800-220-5701 or• The Internet at www.capresso.com. 23. FROTHXPRESS PLUS SYSTEM WITH MILK CONTAINER If you prepare many Cappuccinos or Lattes at a time, we recom-mend the fast and p...
Page 24 - MALFUNCTION 8; Solution; One Year or
D. GRINDER MAKES AN EXTREMELY LOUD NOISE;NO BEANS ARE GROUNDReason : A stone is blocking the burr grinder. Solution : Call customer service at: 1-800-220-5701. E. THE DRAWER (Fig. 19) DOESN’T PULL OUT OR DISPLAYSHOWS MALFUNCTION 8 Solution : Turn off and unplug machine. Wait a minute. Turn machine o...