Jura F9 - User Manual

5 Control elements P 3 1 2 4 6 5 Top of the machine 1 Q On/Off button 2 g Rotary Switch 3 O P button (programming) Front 4 Display 5 Multi-function buttons (button function depends on what is shown in the display) 6 l Switch for hot water preparation

6 Important information Important information The machine is designed and intended for private domestic use. It should only be used for coffee preparation and to heat milk and water. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibil-ity for the ...

7 Important information U Never open and repair the machine yourself. Do not modify the machine in any way that is not described in these instructions for use. The machine contains live parts. If opened, there is a danger of potentially fatal injury. Repairs may only be carried out by authorised JUR...

8 Important information U Only connect the machine to the mains volt-age in accordance with the information on the rating plate. The rating plate is located on the underside of your F9. Further technical data is provided in these instructions for use (see Chapter 9 ‘Technical data’). U Connect the F...

9 Important information People, including children, who U do not have the physical, sensory or mental capabilities to use the machine safely or U are inexperienced or lack knowledge in how to use the machine safely must be supervised by a responsible person when using it, or must be instructed in ho...

10 1 Preparing and using for the first time 1 Preparing and using for the first time Visit us on the Internet. You can download short operating instruc- tions for your machine from the JURA website (www.jura.com). You will also find interesting and up-to-date information on your F9 and on every aspe...

12 1 Preparing and using for the first time T   Fill the water tank with fresh, cold water and reinsert the tank. T   Press the ‘Next’ button. ‘Switch open’ T   Place a receptacle under the hot-water spout and dual spout.   l   T   Turn the switch to the  m position. ‘Filter is being  rinsed’ , wate...

14 1 Preparing and using for the first time Your F9 creates fine, creamy, feather-light milk foam with a perfect consistency. The most important requirement for frothing milk is a milk temperature of 4–8 °C. We would therefore recommend using a milk cooler or a vacuum milk container. T   Remove the ...

15 2 Preparation 2 Preparation E You can stop the machine at any time while a speciality coffee or hot water is being prepared. Just press any button (for a speciality coffee) or return the switch to its original position (for hot water preparation). E During the grinding operation you can select th...

16 2 Preparation The following additional products are shown in the product selector view: U ‘Ristretto’ U ‘2 ristretti’ U ‘2 espressi’ U ‘2 coffees’ U ‘Special’ U ‘Cappuccino’ U ‘Macchiato’ U ‘Caffè latte’ U ‘Portion milk foam’ E The product selector view disappears automatically after 10 seconds i...

17 2 Preparation Example:  Proceed as follows to prepare two coffees (using product selector view). Precondition:  The start screen is displayed. T   Place two cups under the dual spout.   g   T   Turn the Rotary Switch to view the product selector.   g   T   Turn the Rotary Switch until the ‘2 coff...

18 2 Preparation You can choose to use a second coffee variety, for example decaf-feinated coffee, with the filter funnel for ground coffee. E Never add more than two level measuring spoons of ground coffee. E Use ground coffee which is not ground too finely. Very fine coffee can block up the system...

19 2 Preparation It is easy to permanently adjust the amount of water for all single products to the cup size. Adjust the amount once as shown in the following example. Every time you prepare a drink in the future, this amount will be dispensed. Example:  Proceed as follows to permanently set the am...

20 2 Preparation You can adjust the grinder on a continuous scale to suit the degree of roast of your coffee. If you adjust the consistency of grind when the grinder is not oper-ating, the grinder adjustment switch could be damaged. T   Only adjust the consistency of grind when the grinder is run- n...

21 3 Daily operation 3 Daily operation Daily maintenance of the machine and hygiene when handling milk, coffee and water are key to a perfect coffee result in the cup every time. You should therefore change the water daily. Precondition:  Your F9 is switched on at the power switch. T   Place a recep...

22 3 Daily operation Carry out the following maintenance actions regularly or as requi- red: U In the interests of hygiene, we recommend changing the milk pipe on a regular basis (approximately every 3 months). Replacement pipes are available from specialised dealers (JURA original accessory set for...

23 4 Permanent settings in programming mode 4 Permanent settings in programming mode Press the P button to enter programming mode. You can navigate through the programme items and permanently save the required settings simply by turning the Rotary Switch and using the multi-function buttons. The fol...

24 4 Permanent settings in programming mode In the programme item ‘Product settings’ ( ‘3/7’ ) you can make the following settings: U ‘Expert mode’ U Set individual settings for all speciality coffees, milk and hot water (see Chapter 4 ‘Permanent settings in programming mode – Adjusting the product ...

26 4 Permanent settings in programming mode T   Press the ‘Expert mode’ button. ‘Expert mode’ T   Press the ‘  >  ’ button (bottom right) several times until ‘Macchiato’ is displayed. T   Press the ‘Macchiato’ button. ‘Macchiato’   g   T   Press the ‘ > ’ button (bottom right) until ‘Add to fa...

27 4 Permanent settings in programming mode T   Press the ‘Product name’ button. The available letters, numbers and special characters appear on the display. E By pressing the ‘abc/ABC’ button, you can switch between lower and upper case letters.   g   T   Turn the Rotary Switch until the letter you...

28 4 Permanent settings in programming mode In the programme item ‘Machine settings’ ( ‘4/7’ ) / ‘Save energy’ you can permanently set an energy-saving mode (Energy Save Mode, E.S.M. © ): U ‘Active’ U Soon after the last preparation, the F9 stops heating up. After about 5 minutes the message ‘Energy...

30 4 Permanent settings in programming mode   O   T   Press the P button to exit programming mode. ‘Please select product’ In the programme item ‘Machine settings’ ( ‘5/7’ )  / ‘Display’ you can set the display brightness and contrast (as a percentage). Precondition:  ‘Please select product’ is disp...

31 4 Permanent settings in programming mode In the programme item ‘Machine settings’ ( ‘4/7’ ) / ‘Factory setting’ the machine can be reset to its factory setting: All user settings (apart from the ‘filter’ and ‘water hardness’) are reset to factory set-tings. Your F9 then switches off. Precondition...

32 4 Permanent settings in programming mode In the programme item ‘Information’ ( ‘7/7’ ) you can view the follow- ing information: U ‘Product counter’ : Number of prepared speciality coffees, speciality coffees with milk and hot water U ‘Maintenance counter’ : Number of maintenance programmes perfo...

33 5 Maintenance 5 Maintenance Your F9 has the following integrated maintenance programmes: U Rinsing the machine ( ‘Rinse the coffee system’ ) U Rinsing the milk system in the dual spout ( ‘Rinse the milk system’ ) U Cleaning the milk system in the dual spout ( ‘Cappuccino cleaning’ ) U Changing th...

34 5 Maintenance After each milk preparation, the F9 prompts you to perform a milk system rinsing. Precondition:  ‘Rinse the milk system’ is displayed. T   Place a receptacle under the dual spout.   k   T   Press the Rotary Switch. ‘Milk system is being rinsed’ , water flows out of the dual spout.Th...

35 5 Maintenance T   Empty the other receptacle and place it under the dual spout again. T   Press the ‘Next’ button. ‘Cleaning Cappuccino’ , the dual spout and the pipe are rinsed with fresh water.The operation stops automatically. ‘Milk system cleaning complete’ appears briefly on the display. You...

37 5 Maintenance   g   T   Turn the Rotary Switch until ‘Maintenance settings’ ( ‘6/7’ ) is displayed. T   Press the ‘Use filter’ button. ‘Use filter’ T   Press the ‘Active’ button. T   Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Insert filter’ T   Remove and empty the water ta...

38 5 Maintenance E After two months, the filter will cease to work. Set the date on the date plate on the filter holder in the water tank. E If the CLARIS Blue filter cartridge is not activated in program-ming mode, you will not be prompted to change the filter. E CLARIS filter cartridges are availa...

39 5 Maintenance After 200  preparations or 80  switch-on rinses, the F9 will prompt you to clean it. If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water. T   Use only original JURA maintenance products. E The cleaning programme lasts app...

40 5 Maintenance T   Empty the drip tray and coffee grounds container and put them back into the machine. ‘Please select product’ appears on the display. Cleaning is now complete. The F9 builds up deposits of limescale over time and automatically prompts you to descale it when necessary. The degree ...

42 5 Maintenance T   Empty the drip tray and coffee grounds container and put them back into the machine. ‘Please select product’ appears on the display. Descaling is now complete. E If the descaling operation stops unexpectedly, rinse the water tank thoroughly. Limescale deposits may form in the wa...

43 6 Display messages 6 Display messages Message Cause/Result Action ‘Fill water tank.’ The water tank is empty. You cannot prepare any products. T Fill the water tank (see Chapter 1 ‘Preparing and using for the first time –Filling the water tank’). ‘Empty grounds’ The coffee grounds container is fu...

44 7 Troubleshooting 7 Troubleshooting Problem Cause/Result Action Insufficient foam is produced when the milk is frothed, or milk sprays from the dual spout. The dual spout is dirty. T Clean the milk system in the dual spout (see Chapter 5 ‘Maintenance – Cleaning the milk system’). T Dismantle and ...

45 8 Transport and environmentally friendly disposal 8 Transport and environmentally friendly disposal Keep the packaging for your F9. It should be used to protect the machine during transport. In order to protect the F9 from frost during transport, the system must be emptied. Precondition:  ‘Please...

46 9 Technical data 9 Technical data Voltage 220–240 V ~, 50 Hz Power 1450 W Conformity mark A Energy consumption ‘Save energy’ / ‘Active’ approx. 5 Wh Energy consumption ‘Save energy’ / ‘Inactive’ approx. 16 Wh Pump pressure static, max. 15 bar Holding capacity of water tank 1.9 l Holding capacity ...

52 11 JURA contact details / Legal information 11 JURA contact details / Legal information JURA Elektroapparate AGKaffeeweltstrasse 10CH-4626 NiederbuchsitenTel. +41 (0)62 38 98 233 @ You will find additional contact details for your country at www.jura.com. The machine complies with the following d...