Jura IMPRESSA E50 - Manuals

9 Note: It is only necessary to adjust the water hardnessbefore the machine is used for the first time or when a diffe-rent quality of water is used.If no water hardness level is changed within 30 seconds, thedisplay goes out and the last value programmed remainsunchanged. 3.7 Adjustable automatic c...

10 7. Drawing off espresso/normal coffee Switch on the machine by pressing button. The machine is ready assoon as the warning lamp lights up. Place 1 or 2 cups under the coffee-spout and press the appro-priate button. The pre-brew function (P.B.A.S © ) moistens the coffee powder, briefly interrupts ...

12 11.8 Regular servicing Regular Jura services ensure your machine’s reliability and longerlife. Keep the original packaging to protect the machine when it istransported. 11.9 Empty system Important: This process is necessary to protect the machinefrom frost damages while being transported. Press b...

13 Switch on machine by pressing button. Push button for about 3 seconds. Warning lamps , (if necessary) , light up. Fill water tank. Empty drip tray and grounds container and replace them. War-ning lamps (if necessary) go out. Place a container under the coffee-spout (9). Put a Jura cleaning tablet...

14 The flashing of warning lamp indicates that the decalcifying program is activated. If warning lamp lights up, empty drip tray (if necessary). Warning lamps , , , flash and warning lamp lights up. Turn selector switch for hot-water/steam (12) back to position . The decalcifying program is continue...