Jacuzzi J - 465 - Manuals
Jacuzzi J - 465 – Manual in PDF format online.
Manuals:
Manual Jacuzzi J - 465
Summary
ADDENDUM Jacuzzi J-400 Series Owners Manual, #2530-442U Your new hot tub includes one of two stereo remote styles. Both remotes function 100% identically and contain only minor cosmetic differences outlined below: Style A Style B 6530-822 Rev.A = Cosmetic Differences Between Remotes 1. The hand held...
Attention New Spa Owner! Congratulations on the purchase of your new Jacuzzi® spa! The following is a list of automated functions performed by your spa. These functions are listed below in an attempt to suppress any operational concerns you may have during the first 24 hours of ownership! Also liste...
Table of Contents 1.0 Important spa Owner Information ......................................................... 1 2.0 FCC notice ............................................................................................... 1 2.1 Industry Canada (IC) Information .......................................
Page 1 J-400 Series 1.0 Important spa Owner Information Your Jacuzzi® spa is constructed to the highest standards and is capable of providing many years of trouble-free use. However, because heat retentive materials are utilized to insulate the spa for efficient operation, an uncovered spa surface d...
Page 2 J-400 Series 3.0 Important safety Instructions for all spa Owners reaD anD FOllOw all InsTruCTIOns CareFullY! This spa was manufactured to meet the standards and specifications outlined in the “Virginia Graeme Baker Pool and Spa Safety Act” (VGB Safety Act). When installing and using this spa...
Page 3 J-400 Series on the grounding lug, inside the equipment compartment on the equipment box. A grounding wire connector is provided on this unit to connect a • minimum No. 8 AWG (8.4 mm²) solid copper conductor between this unit and any metal equipment, metal enclosures of electrical equipment, ...
Page 4 J-400 Series 6. ! warnInG: rIsK OF seVere InJurY Or DeaTH! Since excessive water temperatures have a high potential for causing • fetal damage during the early months of pregnancy, if pregnant or possibly pregnant, consult your physician before using a spa. Pregnant or possibly pregnant women...
Page 5 J-400 Series 9. CauTIOn: TO DeCrease rIsK OF PrODuCT DamaGe. Maintain water chemistry in accordance with manufacturer’s • instructions. Proper chemical maintenance of spa water is necessary to maintain • safe water and prevent possible damage to spa components. 10. nOTe: This spa is not inten...
Page 6 J-400 Series 3.1 entrapment risk The Consumer Products Safety Commission/USA has reported that users of pools and spas have become entrapped (stuck) to drain and/or suction fittings causing death, drowning, or serious injury (see diagram below). This spa was manufactured to meet the standards...
Page 7 J-400 Series 3. ! DanGer: rIsK OF seVere InJurY Or DrOwnInG! Body entrapment: May occur when part of the torso becomes entrapped, inserted or sucked into a suction or outlet opening. Never allow children to play or get near the suction fittings, suction • covers, filter, filter lid or skimmer...
Page 8 J-400 Series 3.3 Important Csa safety instructions (Canada only) When using this electrical equipment, basic safety precautions should always be followed, including the following: 1. reaD anD FOllOw all InsTruCTIOns. 2. A green colored terminal or a terminal marked G, Gr, Ground, Grounding or...
Page 11 J-400 Series 5.0 General electrical safety Instructions You r new Jacuzzi® spa is equipped with the J-1000™ system. It contains the most advanced safety and self- protective equipment in the industry. Nonetheless, this spa must be installed properly to ensure dependable usage. Please contact...
Page 12 J-400 Series All wiring must be copper to ensure proper connections. • Do not use aluminum wire. When using wire larger than #6 (10 mm²), add a junction box near • the spa and reduce to short lengths of #8 (8.4 mm²) wire to connect to the spa. 4. The electrical supply for this product must i...
Page 13 J-400 Series Figure a equipment area 10 4 2 2 Flow Note: Pump Locations Vary by Model 5 6 6 9 8 7 6 3 1 11 1. Control Box 2. Power Supply Entrance(s)3. Jet Pump #14. Heater5. Spa Drain Valve6. Pump Drain Plugs(s) 7. Jets Pump #28. Filter/Circulation Pump9. Optional CD Ozonator (Purchase Sepa...
Page 14 J-400 Series BLK RED RED RED BLKBLK 1 2 Figure-C TB1 to Circuit Board Power In Green TB3 1 2 BLUE BLUE BROWNBROWN Figure-D TB1 to Circuit Board Power In Green TB3 all north american 240V models: 240 VAC, 3-Wire Connection 60 Hz all export models: 230 VAC, 3-Wire Connection 50 Hz 7.0 Power re...
Page 15 J-400 Series Export J-460/J-465/J-470/J-480 Models (50Hz) Voltage: 230 VAC 230 VAC 230 VAC Max. Current Draw: 16A 21A 29A Frequency: 50 Hz 50 Hz 50 Hz Number of Wires: 3 3 3 Circuit Breaker (2-Pole): 20A* 30A** 40A*** * In 20A configuration, the heater will not operate while either jets pump...
Page 20 J-400 Series 9.0 Control Functions 9.1 Control Panel a. select Button: Filter cycle programming features. Pressing the select button also allows you to turn on/off the circulation pump, when it is in an off state. If the circulation pump was turned on automatically, it cannot be manually tur...
Page 21 J-400 Series 9.2 lCD Display = lock: Indicates panel, set temperature, or filter cycle programming is locked. = Heat: Indicates heater is on. = Ozone: Indicates optional CD ozonator is on. = adjust Filter Cycle: Indicates filter cycle programming feature is accessed. = Filter Cycle number: I...
Page 26 J-400 Series 10.0 Operating Instructions Your Jacuzzi® spa has a touch-sensitive control panel, massage selectors, and air control knobs located on the top rim of the spa (pages 22 - 2 5 ). These controls let you operate many of the special functions of your Jacuzzi spa. By familiarizing you...
Page 27 J-400 Series 10.6 light mode Button This button offers 4 light modes for your enjoyment. Press this button to select your favorite lighting effect as follows: Press Once Press Again Press Again Press Again Solid Color Mode: Selects one of 7 solid (high-intensity) colors of choice. AMBER (X7)...
Page 28 J-400 Series 10.10 waterColour™ waterfall Control Turn waterfall control valve (pages 2 9-3 6) counterclockwise to increase waterfall output. Turn control valve clockwise to decrease or turn off waterfalls. 10.11 air Controls Certain jet systems have their own air control. Each control intro...
Page 30 J-400 Series 1 1 2 2 2 2 3 4 4 4 4 4 3 1 2 3 4 air Controls Operation • Rotate air controls 1-4 to add air to designated jet groups. • Center footwell IX Jet draws air at all times when jets pump 1 is running. This jet has no air control. 10.14 J-480 air Controls Diagram Spa operation subjec...
Page 34 J-400 Series 1 1 2 2 2 2 2 3 3 3 1 3 2 air Controls Operation • Rotate air controls 1-3 to add air to designated jet groups. 10.18 J-465 air Controls Diagram Spa operation subject to change without notice.
Page 37 J-400 Series 11.0 Heating modes The control system in your spa activates a programmable “standard” or “economy” mode which effects when the heater operates. Refer to sections 11.1 and 11.2 below for additional information. 11.1 standard mode (Factory Default) Standard mode is typically selec...
Page 38 J-400 Series 12.0 Programming Instructions 12.1 Programming Filter/Circulation Pump run Time The Sentry control system allows you to easily adjust two separate aspects of filter/circulation pump operation: 1. The time of day (start time) the filter/circulation pump turns on.2. The length of ...
Page 42 J-400 Series Programming Instructions1. Press the CYCle button 2 times. The main display reads “FIL” indicating the “Change Filter” display program has been accessed. 2. Press seleCT button once to display the currently programmed duration or to view days elapsed since last filter cleaning i...
Page 43 J-400 Series 13.0 spa maintenance Proper and regular maintenance of your spa will help it retain its beauty and performance. Your authorized Jacuzzi dealer can supply you with all the information, supplies, and accessory products you will need to accomplish this. DanGer: rIsK OF seVere InJur...
Page 44 J-400 Series To ensure optimum performance, the 24-hour ProClear™ II skimming filter cartridge (A) must be cleaned every three months and replaced once a year. The secondary ProClear™ Plus polishing filter bag (B) should be emptied weekly and replaced every 3 months. The ProClear™ II filter ...
Page 45 J-400 Series 6. Clean the ProClear filter cartridges with a garden hose and high pressure nozzle. Rinse debris from the filter pleats beginning at the top and working your way downward. Continue, one section at a time until you have cleaned all debris from the filter pleats. When replacing t...
Page 46 J-400 Series 5. Pull the larger (rear) body outward as shown to open drain. 6. After the spa drains, perform steps 2-5 in reverse order to close the drain prior to refilling spa. After refilling, turn on power to the spa and follow the steps listed under “Spa Fill Up Procedures.” (page 15 )....
Page 47 J-400 Series against deterioration caused by UV rays from the sun. Never allow anyone to stand or sit on the cover, and avoid dragging it across rough surfaces. 13.7 winterizing Your Jacuzzi spa is designed to automatically protect itself against freezing when operating properly. During peri...
Page 48 J-400 Series Consult your Jacuzzi dealer if you have any questions regarding winter use or winterizing. 13.8 restarting Your spa in Cold weather If you want to start up your spa after it has sat empty for a time in freezing temperatures, be aware that the water remaining in certain sections ...
Page 49 J-400 Series 14.0 water Quality maintenance To decrease the risk of contracting a waterborne illness (e.g. an infection, bacteria or virus) and/or respiratory ailments, m aintain water quality within specified limits. This will enhance your enjoyment and prolong the life of the hot tub’s equ...
Page 50 J-400 Series When adding spa shock (chlorine or non-chlorine) or pH balancing chemicals activate the jets pump(s) and leave the spa cover open for a minimum of 20 minutes. By doing this you will allow excessive chemical vapors to exit the spa, protecting pillows and plastic knobs from chemic...
Page 51 J-400 Series 15.0 Troubleshooting - Display messages There are a number of unique functions designed into your Jacuzzi spa to protect it from damage and/or to aid in troubleshooting. Following is a listing of all the possible messages along with their meanings: messaGe meanInG Overheat Prote...
Page 55 J-400 Series 17.0 north american 60 Hz J-460/J-465/J-470/J-480 wiring Diagram K13 J8 J6 J7 12V AC Output Power to Lighting Controller . T ransformer T1 K1 K2 K3 K4 K5 K6 J4 J3 K7 K8 Options Sensors LCD Panel Flow Switch Hi-Limit/Freeze Sensor Temperature Sensor LED Lighting Controller This d...
Page 57 J-400 Series Red (L2) Pigtail Neutral Bus Ground TB2 TB1 Black (L1) Green Main Service Panel with GFCI 2-Pole GFCI Breaker Ground/Bonding Lug** 2-Pole Circuit Breaker with 2-Wire Grounded Load Connection (3 Wires to Hot Tub, 2-Hot (L1-L2), 1-Ground) White (N) Black (L1) Red (L2) 240 VAC No L...
Page 58 J-400 Series 20.0 Optional Jacuzzi J-1000 audio system™ stereo system Features 20.1 sound system Controls 1 2 17 3 9 8 7 5 4 6 10 11 13 15 12 16 14 1. Power On/Off Button2. Tune/Seek Up/Down Button3. Volume Up/Down Button4. Mode Button5. SEL/EQ Button6. AS/PS Button7. MUTE Button8. BAND/RPT ...
Page 60 J-400 Series 8. adjusting Fader level Press EQ button (5) repeatedly until display reads “FADER.” Press VOL Up/Down button (3) to choose desired set - ting. A display of “FADER F-R” indicates center, R01 to 15 indicates rear fade, F01 to 15 indicates front fade. note: Unit returns to volume ...
Page 61 J-400 Series 12. Open/Close Front Panel Press firmly on the release button (15), then open front panel (16) by gently lifting upward on bottom edge. To close front panel, gently flip panel down, then press firmly on panel directly above release button (15) until you hear an audible “click”. ...
Page 62 J-400 Series 5. accessing Preset stations Press and hold ENT/SH button (9) until display reads “SHIFT”. Repeatedly press TUN up or down button (2) to choose preset 1-6, then press ENT/SH button (9) to confirm selection. 20.4 J-1000™ audio system CD Player Operation 1. insert, play, and eject...
Page 63 J-400 Series Press a second time to deactivate or press RDM button to cancel RPT function. 4. searching File or Folder in mP3/wma CD To Search File in CDP (MP3/WMA) mode: Press AS/PS button (6) to • enter track searching mode. Then press the VOL up/down button (3) to scroll through available...
Page 64 J-400 Series 2. Copying music Files from usB to nanD (internal memory) In USB mode, press and hold SEL button (5) for about 2 seconds until “ONE COPY” displays on LCD (17), then press VOL up or down button (3) to choose ONE or ALL. Press ENT button (9) to confirm selection.If ONE COPY is sel...
Page 65 J-400 Series 20.6 J-1000™ audio system iPod Operation 1. Play iPod Open front panel (16) and plug a iPod into the iPod Docking Station (12) as shown. Refer to step 12 (page 6 1 ) for details. The iPod will begin to play automatically. Close front panel. The “iPod” symbol will display to indi...
Page 66 J-400 Series 20.7 Docking your iPod music Player 1. Docking Your iPod The Docking Station for iPod is compatible with all dockable Apple iPod models. To Install an Apple iPod:A. Open Docking Station door (A) as outlined in step 12 (page 6 1 ). B. Center iPod over Docking Station Interface Po...
Page 69 J-400 Series 20.11 standard wireless remote Control (Included With Optional J-1000 Sound System) • Usable range 15' (5m) • Never leave the remote under the s pa cover for any reason. • Battery Replacement: Use Coin Type, CR2025 or equivalent. wireless remote Control Command summary Button Op...
Page 70 J-400 Series Button Operation Button Operation Auto Auto Button: Scans through preset radio stations. 4 Station 4 Preset Button: Has no CD/Radio function. Press and hold to set station 4 or pause iPod when docked in Docking Station. Audio Audio Button: Selects treble, bass, fader or balance,...
Page 71 J-400 Series 20.12 wireless remote Battery replacement Procedure 1. Start by removing the rubber cover to the remote (Figure A). 2. Turn the remote unit over and locate the battery door (Figure B). 3. Rotate the battery door, with a coin, counterclockwise until the dot aligns with the Open a...
Jacuzzi Manuals
-
Jacuzzi Z301
Manual
-
Jacuzzi J-335
Manual
-
Jacuzzi GA99
Manual
-
Jacuzzi J-315
Manual
-
Jacuzzi J - 280
Manual
-
Jacuzzi J - 230
Manual
-
Jacuzzi J-365
Manual
-
Jacuzzi 300
Manual
-
Jacuzzi HJ78000
Manual
-
Jacuzzi eZ33
Manual
-
Jacuzzi E-1451
Manual
-
Jacuzzi 2003+
Manual
-
Jacuzzi F4N6036WRL
Manual
-
Jacuzzi GL26
Manual
-
Jacuzzi J - 375
Manual
-
Jacuzzi J - 480
Manual
-
Jacuzzi Faucet Kit
Manual
-
Jacuzzi J - 325
Manual
-
Jacuzzi J - 210
Manual
-
Jacuzzi EV77959
Manual