Jacuzzi Z301 - Manual - manualsarea.com

Page 2 - IMPORTANT SAFETY INFORMATION; READ AND FOLLOW ALL INSTRUCTIONS

IMPORTANT SAFETY INFORMATION READ AND FOLLOW ALL INSTRUCTIONS Read manufacturer’s safety information provided with all optional equipment. Warning — Risk of injury: Children, the elderly, and the infirm should not use the spa unless they are super- vised at all times. Infants should not be permitted...

Page 3 - Contents; OWNER’S MANUAL; SAVE THESE INSTRUCTIONS

Contents Specifications ___________________________________________________ 2 InstallationInspection and Shipping Claim _______________________________________ 3Positioning Your Spa _______________________________________________ 3Electrical Requirements ____________________________________________ ...

Page 4 - SPECIFICATIONS

SPECIFICATIONS Product specifications are subject to change without notice. DIMENSIONS 74-1/4" (1886 mm) L 62-5/16" (1582 mm) W29" ( 737 mm) H PRODUCTWEIGHT 371 lb(169 kg) ELECTRICALREQUIREMENTS* 115 VAC, 15 AMP, 60 HzRequires DedicatedSeparate Circuit.Equipped with GFCIIncorporated in L...

Page 5 - INSTALLATION; Inspection and Shipping Claim; Electrical Precautions; WARNING

INSTALLATION Inspection and Shipping Claim Check for shipping damage upon receipt of the spa. Jacuzzi Whirlpool Bath is not responsible for damage tothe spa sustained during shipping. If damage is evidentbefore unpacking, refer to instructions regarding ship-ping claims on the outside of the carton ...

Page 6 - Outdoor Installation; Indoor Installation; Drainage

INSTALLATION Outdoor Installation If you install the spa outdoors, we recommend that you provide a concrete pad for it to rest on. To do this,construct forms for a 4" thick level pad. Install a #10gauge wire mesh 6" x 6" steel reinforced grid. Attach a#8 solid copper wire to the grid wit...

Page 7 - • Immediately open the drain valve and drain the

INSTALLATION Equipment Set-Up 1. Remove the plastic sheet covering the spa. NOTE: Stepping into the spa with shoes will scratchthe acrylic surface. 2. Remove any packing materials from the spa. 3. Remove the filter cartridge from its plastic bag. 4. Pull open the skimmer/filter door by the handle lo...

Page 8 - OPERATION; Operating Instructions

OPERATION Operating Instructions Initial Instructions Using a garden hose, fill the spa with water to the water line indicator mark on the skimmer frame. WARNING: Do not provide power to the spa unless itis filled with water to the normal water level. Refer towater line indicator mark on skimmer fra...

Page 9 - AIR INDUCTION CONTROLS; Silent Air Induction; MAGIC TOUCH SWITCH

OPERATION 7 Normal Operation/Whirlpool Sys-tem You can enjoy the spa with or without activating the whirlpool. Either way, bathing in your spa can bepleasurable, as well as therapeutic. After a busy,stressful day, you can look forward to soaking in yourspa in still water with no turbulence—only the ...

Page 10 - MAINTENANCE; Water Quality and Water Chemistry; Do not add chemicals directly into the skimmer.

MAINTENANCE 8 Water Quality and Water Chemistry Maintaining water quality and water chemistry in your spa is extremely important and should be a regular part of your spa maintenance program, as a neglected spa can be a breeding place for dangerous bacteria. The water quality of your spa is maintaine...

Page 11 - Balancing pH; Balancing Total Alkalinity; Disinfecting; Do not install a cover until the disinfectant level; WATER QUALITY DEFINITIONS

MAINTENANCE Balancing pH For good hygiene and equipment longevity, main- tain the pH of your spa water according to the instruc-tions provided. pH is the measure to determine if the spawater is too acidic (low pH), or too alkaline (high pH).The ideal range for spa water is 7.4 to 7.6 pH. Forexcessiv...

Page 12 - Filter Maintenance; NORMAL WATER LEVEL; SKIMMER BASKET ACCESS

MAINTENANCE The suction cover located in the foot well area should be checked at least once a week for collecteddebris, such as leaves, hair, etc., and cleaned asnecessary. It may not be necessary to remove thesuction cover to clean it, but if you need to, remove thecenter screw with a Phillips scre...

Page 13 - Automatic Filtration/Maintenance

MAINTENANCE Automatic Filtration/Maintenance If you plan to be away, minimum water quality will be maintained by running the filter system. If you will be away for an extended period, however, we recommend that you drain the spa (following the procedure described under Winterizing on this page), as ...

Page 14 - Covering Your Spa; Jacuzzi Whirlpool Bath does not guarantee or; Repairs to the Acrylic; PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.; Jacuzzi Whirlpool Bath National Headquarters

MAINTENANCE 12 Covering Your Spa An optional rigid spa cover for your spa is available from your Jacuzzi Whirlpool Bath dealer. Use of thiscover will help to reduce energy costs by minimizing heatloss and evaporation. In addition, the attractive cover isan effective means of preventing debris such a...

Page 15 - Jacuzzi Whirlpool Bath Limited Warranty; Jacuzzi Whirlpool Bath

Jacuzzi Whirlpool Bath Limited Warranty Z101/301 Spa Jacuzzi Whirlpool Bath P.O. Drawer J Walnut Creek, CA 94596-9885 WARRANTY COVERAGE Jacuzzi Whirlpool Bath (the “Company”) offers the following express limited warranty to the original purchaser of any Jacuzzi Whirlpool Bath Spa Line Product (“unit...

Page 16 - Warranty

RESPONSIBILITIES OF OTHERS Inspecting the unit prior to installation is the responsibility of the installer or building contractor who acts on behalf of the user. They are responsible for ensuring theunit is free of defect or damage. Notices are placed on and in the unit and on the shipping carton a...

Jacuzzi Z301 - Manual

Table of Contents:

Summary

Other Jacuzzi Models