Jacuzzi EC30000 - Manuals - manualsarea.com

Page 2 - SAFETY INSTRUCTIONS; WARNINg; CONTENTS; Specifications; NOTE; : mInImum WaTeR PReSSuRe FoR THeSe SySTemS IS 40 PSI.

Jacuzzi Whirlpool Bath: Shower Towers Page FZ71000B • 09/07 SAFETY INSTRUCTIONS WARNINg : WHen uSIng THIS unIT, BaSIC PReCauTIonS SHouLd aLWayS Be FoLLoWed, InCLudIng THe FoLLoWIng: DANgER : do noT PLaCe oR uSe eLeCTRICaLLy ConneCTed devICeS, SuCH aS TeLevISIon, RadIo, oR STeReo SPeakeRS, LIgHTS, Ha...

Page 3 - RistorreTM OvaleTM Shower Tower — Specifications; DIMENSIONS; Product specifications are subject to change without

Jacuzzi Whirlpool Bath: Shower Towers Page 3 FZ71000B • 09/07 Ristorre™ Ovale™ Shower Tower — Specifications DIMENSIONS 3" ( 76 mm) d (depth) 10-1/4" ( 60 mm) W 46-5/8" (1184 mm) H PRODUCT WEIgHT lb (10 kg) SHIPPINg WEIgHT 7 lb (13.3 kg) Product specifications are subject to change witho...

Page 4 - RistorreTM OndaTM Shower Tower — Specifications

Jacuzzi Whirlpool Bath: Shower Towers Page 4 FZ71000B • 09/07 DIMENSIONS 3" ( 76 mm) d (depth) 13-1/" ( 343 mm) W 51-1/4" (130 mm) L PRODUCT WEIgHT 5 lb (11 kg) SHIPPINg WEIgHT 9 lb (13. kg) Product specifications are subject to change without notice. Ristorre™ Onda™ Shower Tower — Speci...

Page 5 - RistorreTM MetalloTM Shower Tower — Specifications

Jacuzzi Whirlpool Bath: Shower Towers Page 5 FZ71000B • 09/07 DIMENSIONS -1/" ( 63.5 mm) d (depth) 1-3/4" ( 1905 mm) W 55-7/8" (1419 mm) L PRODUCT WEIgHT 6 lb (1 kg) SHIPPINg WEIgHT 9 lb (13. kg) Product specifications are subject to change without notice. Ristorre™ Metallo™ Shower Tower...

Page 6 - RistorreTM OvaleTM Shower Tower — Component Identification; Parts List

Jacuzzi Whirlpool Bath: Shower Towers Page 6 FZ71000B • 09/07 Ristorre™ Ovale™ Shower Tower — Component Identification Parts List The parts list table common to all Ristorre shower towers is located on Page 9. Please refer to this table for com- ponent identification of parts list in all Ristorre sh...

Page 7 - RistorreTM OndaTM Shower Tower — Component Identification; FRONT

Jacuzzi Whirlpool Bath: Shower Towers Page 7 FZ71000B • 09/07 Ristorre™ Onda™ Shower Tower — Component Identification Parts List The parts list table common to all Ristorre shower towers is located on Page 9. Please refer to this table for com- ponent identification of parts list in all Ristorre sho...

Page 8 - RistorreTM MetalloTM Shower Tower — Component Identification

Jacuzzi Whirlpool Bath: Shower Towers Page 8 FZ71000B • 09/07 Ristorre™ Metallo™ Shower Tower — Component Identification Front Plate Wall mount Shower 1 1 Remark no. name Qty 19 3 7 6 8 10 1 mirror 6 Body Jet 1 Included Screw Included Connection rod 1 Included Hanger Included 6 Screw Parts List The ...

Page 9 - Common Parts List

Jacuzzi Whirlpool Bath: Shower Towers Page 9 FZ71000B • 09/07 Common Parts List Qty name Remark 0b 171819 13 1 0a 141516 Tube Temp Check Spout (m3.5X5mm) Screws Flow Control glass Shelf assembly Plastic anchors Hand Shower Square Temp Check Spout diverter Hand Shower Bracket Shower Flexible Hose 1 1...

Page 10 - Finish Wall Preparation; the wall at the locations and dimensions shown; INSTALLATION; Top of un

Jacuzzi Whirlpool Bath: Shower Towers Page 10 FZ71000B • 09/07 NOTE : Parts with item number listed are included. Determine the installation height of the shower tower. The height of the top row of the body jets should be level with the users’ shoulders. Place a mark on the wall at the top of the un...

Page 11 - Assemble and Install the Shower Tower; washer at the water inlet fitting of the wall mount

Jacuzzi Whirlpool Bath: Shower Towers Page 11 FZ71000B • 09/07 9 Cover 6 8 Parts List The parts list table common to all Ristorre shower towers is located on Page 9. Please refer to this table for com- ponent identification of parts list in all Ristorre shower towers. 1 16 5 Assemble and Install the...

Page 12 - when installing. Tighten fittings with a; Onda; Figure 7

Jacuzzi Whirlpool Bath: Shower Towers Page 1 FZ71000B • 09/07 . Connect 1/" hoses from the front plate (1) marked in red and blue to the hot and cold water supply’s, respectively, as shown in Figure 7. NOTE : do not bend or kink the hoses when installing. Tighten fittings with a wrench and test ...

Page 13 - Jacuzzi Whirlpool Bath: Shower Towers; Figure 9

Jacuzzi Whirlpool Bath: Shower Towers Page 13 FZ71000B • 09/07 4. using the dimensions indicated in Figure 9, drill two holes 1/4” diameter by 1-3/8” deep into the wall on the right hand side of the shower tower. Insert the plastic anchors (18) into each of the holes, and mount the bracket (17) onto...

Page 14 - Jacuzzi Whirlpool Bath; Bath spout; Troubleshooting; OPERATION

Jacuzzi Whirlpool Bath: Shower Towers Page 14 FZ71000B • 09/07 PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANgE WITHOUT NOTICE. USE INSTALLATION INSTRUCTIONS SUPPLIED WITH PRODUCT. Jacuzzi Whirlpool Bath has obtained applicable code (standards) listings generally available on a national basis for produc...

Page 15 - Jacuzzi Whirlpool Bath Limited Warranty; Shower System Product; WARRANTY COVERAgE; RETURN OF WARRANTY CARD

Jacuzzi Whirlpool Bath Limited Warranty Shower System Product WARRANTY COVERAgE Jacuzzi Whirlpool Bath (the “Company”) offers the following express limited warranty to the original purchaser of any Jacuzzi Whirlpool Bath Shower System product (“unit”) who purchases the product for personal or single...

Page 16 - RESPONSIBILITIES OF OTHERS; WARRANTY SERVICE; JACUZZI WHIRLPOOL BATH

W arranty Registration Card n inety- d ay Parts o nly Limited W arranty o n a ccessory(ies) FZ71000B This card must be filled out and returned to the address printed on the other side within thirty (30) days from date of purchase in order for this warranty to be come ef fective. Purchaser's n ame __...