INSTEON 75791 - Manuals

INSTEON® Outdoor Wireless IP Camera insteon.com 6 Upon installation completion, restart computer. The IP Camera Tool icon will appear on the desktop automatically. NOTE: If you use Windows 7 and there is no icon on desktop after installation of the IP Camera Tool, check the camera software installat...

INSTEON® Outdoor Wireless IP Camera insteon.com 7 2. SOFTWARE OPERATION 2.1 IP Camera Tool When camera has been installed, open IP Camera Tool program on your computer. It will automatically begin searching for your camera over the LAN. There are three possible scenarios: 1) If no camera is found on...

INSTEON® Outdoor Wireless IP Camera insteon.com 8  Basic Properties: Find device information such as device ID, the system firmware version and web UI version If there are several cameras on the list, then choose Basic Properties to check the device ID and find that camera’s specific IP address. Fo...

INSTEON® Outdoor Wireless IP Camera insteon.com 9  IP Address: Fill in the assigned IP address. Make sure you are using an address that is on the same subnet as your PC.  Subnet Mask: The default subnet mask of the equipment in our LAN is: 255.255.255.0.You can find the subnet mask in the basic in...

INSTEON® Outdoor Wireless IP Camera insteon.com 10 NOTE: If you download the firmware, check if the two .bin files are exactly the same size. If it fits, you can upgrade it. If not, download the firmware again until the files are exactly the same size. Otherwise, your camera will crash with the firm...

INSTEON® Outdoor Wireless IP Camera insteon.com 11 2) The default user is admin. Leave the password field blank. 3) There are two login modes depending on your browser: ActiveX (IE) and Server Push Mode (Safari, Firefox, Chrome) The interface supports ten languages If you use IE browser, select here...

INSTEON® Outdoor Wireless IP Camera insteon.com 12 Internet Explorer Setup: Fill in the “admin” user name and click the first login button. The first time you log into the UI, you will receive an ActiveX prompt (as shown above). Right click on the active prompt and choose Run Add-on. Select Run on t...

INSTEON® Outdoor Wireless IP Camera insteon.com 14 Safari, Firefox, Chrome and Other Browser Setup: Fill in the “admin” user name and click the second login button. You may be asked for your username and password again prior to login. After you enter your user name, you will see the camera’s device ...

INSTEON® Outdoor Wireless IP Camera insteon.com 15 If you want to view the device information, choose For Administrator, then click Device Info. Firefox, Chrome and Safari: When you login to the UI, you will see Device Status which is the same as Device Info in Internet Explorer.

INSTEON® Outdoor Wireless IP Camera insteon.com 16 2.4 For Visitor Internet Explorer: Multi-device window: The firmware inside the camera can support a maximum of nine simultaneous cameras. Add cameras in multi-device settings. OSD: Add a timestamp to the video with five character colors Add timesta...

INSTEON® Outdoor Wireless IP Camera insteon.com 17 2.5 For Operator Internet Explorer: Click For Operator. The following screen will appear: Flip and Mirror: Camera will reverse image/video feed. Mode: Select lighting mode: 50HZ, 60HZ and outdoor (Note: it is not recommended to use this item outdoor...

INSTEON® Outdoor Wireless IP Camera insteon.com 18 2.6 For Administrator Internet Explorer: Click For Administrator. The Device Status will appear with the device ID, firmware version and other information about the camera. Firefox, Chrome and Safari: Click Device Management to enter the administrat...

INSTEON® Outdoor Wireless IP Camera insteon.com 19 NOTE: The record and multi-device functions are controlled by ActiveX controller, so Firefox and Chrome will not allow these functions. 3. CONFIGURE ADMINISTRATOR SETTINGS 3.1 Alias Settings The default alias is anonymous. Set a name for your camera...

INSTEON® Outdoor Wireless IP Camera insteon.com 25 3.5 Basic Network Settings Set a static IP for the camera by choosing Basic Network Settings and selecting an address within your LAN. Follow the same procedure to access these settings in the IP Camera Tool.

INSTEON® Outdoor Wireless IP Camera insteon.com 27 3.6 Wireless LAN Settings See Set Wireless LAN Settings in Quick Start Guide. 3.7 ADSL Settings When directly connected to the Internet through ADSL, you can enter the ADSL username and password obtained from your ISP. 3.8 UPnP Settings Check Using ...

INSTEON® Outdoor Wireless IP Camera insteon.com 28 3.10 Mail Service Settings If you want the camera to send email notifications when motion has been detected, configure Mail Service Settings. Make sure your sender address supports SMTP. Four recipients can be added to receive images. Use the correc...

INSTEON® Outdoor Wireless IP Camera insteon.com 29 1) Cannot connect to the server 2) Network Error. Please try later. 3) Server Error 4) Incorrect user or password 5) Sender denied by server. This may be because the server needed to authenticate the user, so check it and try again. 6) Receiver is d...

INSTEON® Outdoor Wireless IP Camera insteon.com 31 Click Submit, then click Test. The following screen will appear if successful: The following errors may occur: 1) Cannot connect to the server. Check that the FTP server is correct. 2) Network error; try later. 3) Server error 4) Incorrect username ...

INSTEON® Outdoor Wireless IP Camera insteon.com 32 If motion is detected after you enable Motion Detect Armed, the Alarm Status will update to Motion Detect Alarm. There are five alarm indicators: 1) Button turns red when motion is detected: 2) A beep will sound 3) The camera will automatically reco...

INSTEON® Outdoor Wireless IP Camera insteon.com 35 3.13 Upgrade Device Firmware For latest firmware updates, visit INSTEON.com. 3.14 Backup and Restore Settings Click Submit to save all the parameters you have set. These parameters will be stored in a .bin that can be restored to load the previously...

INSTEON® Outdoor Wireless IP Camera insteon.com 36 3.16 Reboot Device Click Reboot Device to power cycle the camera. To manually reboot, unplug the camera and plug it back in. 3.17 Log The log displays the users who have accessed the camera. Figure 3.36 3.18 Back This will take you back to the video...

INSTEON® Outdoor Wireless IP Camera insteon.com 37 4. APPENDIX 4.1 Frequently Asked Questions Always confirm connectivity with your LAN and the internet prior to testing your camera. 4.1.1 I forgot my username and/or password Reset the administrator username and password by making sure the camera is...

INSTEON® Outdoor Wireless IP Camera insteon.com 38 If ActiveX is running but you still cannot see live video, a red cross is displayed in the center of the video and a yellow light appears in the device status, change the port number (do not use port number 80). Note: Make sure that your firewall or...

INSTEON® Outdoor Wireless IP Camera insteon.com 39 2. The port that the camera is using is blocked by a firewall or anti-virus software. Try changing the port number. 3. Port forwarding is not successful (see How to Set DDN Service Settings in the Quick Start Guide). 4.1.5 IP Camera Tool can’t find ...

INSTEON® Outdoor Wireless IP Camera insteon.com 40 4.1.10 Why won’t my camera connect wirelessly? If your camera cannot connect wirelessly after you enable the wireless settings, power cycle the camera by unplugging the power cable and plugging it back in. Make sure your wireless settings are correc...

INSTEON® Outdoor Wireless IP Camera insteon.com 41 manual for device-specific port forwarding instructions. Netgear 1. Type your router’s address into an Internet browser. By default, this should be 192.168.0.1; the information should be provided in your router’s instructions or on the router itself...

INSTEON® Outdoor Wireless IP Camera insteon.com 44 Storage Humidity 0% ~ 90% non-condensing PC Requirements CPU 2.0GHZ or above Memory Size 256MB or above Display Card 64M or above Supported OS Microsoft Windows 2000/XP /Vista/Windows 7-32bit / Windows 7 -64bit / MAC OS Browser IE 6.0, IE7.0, IE8.0,...