Page 2 - CONTENTS
INSTEON® Outdoor Wireless IP Camera insteon.com 1 CONTENTS 1. WELCOME .............................................................................................................................. 3 1.1 Features............................................................................................
Page 5 - Preparations Before Use; . Follow the onscreen instructions to install camera software.
INSTEON® Outdoor Wireless IP Camera insteon.com 4 1.3 Product views 1.3.1 Front View 1.3.2 Back View 1.4 Preparations Before Use 1.4.1 Software installation 1) Put the CD in the CD drive of your computer, then open CD 2) Double click IPCamSetup.exe . Follow the onscreen instructions to install camer...
Page 6 - Next; to complete the software installation
INSTEON® Outdoor Wireless IP Camera insteon.com 5 3) Click Next to complete the software installation
Page 7 - CAUTION
INSTEON® Outdoor Wireless IP Camera insteon.com 6 Upon installation completion, restart computer. The IP Camera Tool icon will appear on the desktop automatically. NOTE: If you use Windows 7 and there is no icon on desktop after installation of the IP Camera Tool, check the camera software installat...
Page 8 - SOFTWARE OPERATION; will automatically begin searching for your camera over the LAN.; Setup Options
INSTEON® Outdoor Wireless IP Camera insteon.com 7 2. SOFTWARE OPERATION 2.1 IP Camera Tool When camera has been installed, open IP Camera Tool program on your computer. It will automatically begin searching for your camera over the LAN. There are three possible scenarios: 1) If no camera is found on...
Page 9 - and web UI version; Network Configuration; : Configure network parameters; Obtain IP from DHCP server:; If checked, camera will obtain its IP address from your DHCP server
INSTEON® Outdoor Wireless IP Camera insteon.com 8 Basic Properties: Find device information such as device ID, the system firmware version and web UI version If there are several cameras on the list, then choose Basic Properties to check the device ID and find that camera’s specific IP address. Fo...
Page 10 - Default administrator user name is “admin”
INSTEON® Outdoor Wireless IP Camera insteon.com 9 IP Address: Fill in the assigned IP address. Make sure you are using an address that is on the same subnet as your PC. Subnet Mask: The default subnet mask of the equipment in our LAN is: 255.255.255.0.You can find the subnet mask in the basic in...
Page 11 - Manually refresh camera list; About IP Camera Tool:; Displays the current version of IP Camera Tool
INSTEON® Outdoor Wireless IP Camera insteon.com 10 NOTE: If you download the firmware, check if the two .bin files are exactly the same size. If it fits, you can upgrade it. If not, download the firmware again until the files are exactly the same size. Otherwise, your camera will crash with the firm...
Page 12 - The interface supports ten languages
INSTEON® Outdoor Wireless IP Camera insteon.com 11 2) The default user is admin. Leave the password field blank. 3) There are two login modes depending on your browser: ActiveX (IE) and Server Push Mode (Safari, Firefox, Chrome) The interface supports ten languages If you use IE browser, select here...
Page 13 - Fill in the “admin” user name and click the first login button.
INSTEON® Outdoor Wireless IP Camera insteon.com 12 Internet Explorer Setup: Fill in the “admin” user name and click the first login button. The first time you log into the UI, you will receive an ActiveX prompt (as shown above). Right click on the active prompt and choose Run Add-on. Select Run on t...
Page 15 - Live Video; to see the camera’s live video feed.
INSTEON® Outdoor Wireless IP Camera insteon.com 14 Safari, Firefox, Chrome and Other Browser Setup: Fill in the “admin” user name and click the second login button. You may be asked for your username and password again prior to login. After you enter your user name, you will see the camera’s device ...
Page 16 - When you login to the UI, you will see; Device Status; which is the same as; Device Info; in
INSTEON® Outdoor Wireless IP Camera insteon.com 15 If you want to view the device information, choose For Administrator, then click Device Info. Firefox, Chrome and Safari: When you login to the UI, you will see Device Status which is the same as Device Info in Internet Explorer.
Page 17 - Add timestamp on record:
INSTEON® Outdoor Wireless IP Camera insteon.com 16 2.4 For Visitor Internet Explorer: Multi-device window: The firmware inside the camera can support a maximum of nine simultaneous cameras. Add cameras in multi-device settings. OSD: Add a timestamp to the video with five character colors Add timesta...
Page 18 - Click For Operator. The following screen will appear:; Brightness; and; For Firefox, Google Chrome and Safari
INSTEON® Outdoor Wireless IP Camera insteon.com 17 2.5 For Operator Internet Explorer: Click For Operator. The following screen will appear: Flip and Mirror: Camera will reverse image/video feed. Mode: Select lighting mode: 50HZ, 60HZ and outdoor (Note: it is not recommended to use this item outdoor...
Page 19 - For Administrator; This is similar to; which will have the same information as IE.
INSTEON® Outdoor Wireless IP Camera insteon.com 18 2.6 For Administrator Internet Explorer: Click For Administrator. The Device Status will appear with the device ID, firmware version and other information about the camera. Firefox, Chrome and Safari: Click Device Management to enter the administrat...
Page 20 - Chrome will not allow these functions.; CONFIGURE ADMINISTRATOR SETTINGS; Date and Time Settings
INSTEON® Outdoor Wireless IP Camera insteon.com 19 NOTE: The record and multi-device functions are controlled by ActiveX controller, so Firefox and Chrome will not allow these functions. 3. CONFIGURE ADMINISTRATOR SETTINGS 3.1 Alias Settings The default alias is anonymous. Set a name for your camera...
Page 26 - Basic Network Settings
INSTEON® Outdoor Wireless IP Camera insteon.com 25 3.5 Basic Network Settings Set a static IP for the camera by choosing Basic Network Settings and selecting an address within your LAN. Follow the same procedure to access these settings in the IP Camera Tool.
Page 28 - Wireless LAN Settings; See Set Wireless LAN Settings in Quick Start Guide.; DDNS Service Settings
INSTEON® Outdoor Wireless IP Camera insteon.com 27 3.6 Wireless LAN Settings See Set Wireless LAN Settings in Quick Start Guide. 3.7 ADSL Settings When directly connected to the Internet through ADSL, you can enter the ADSL username and password obtained from your ISP. 3.8 UPnP Settings Check Using ...
Page 29 - Mail Service Settings
INSTEON® Outdoor Wireless IP Camera insteon.com 28 3.10 Mail Service Settings If you want the camera to send email notifications when motion has been detected, configure Mail Service Settings. Make sure your sender address supports SMTP. Four recipients can be added to receive images. Use the correc...
Page 30 - Report Internet IP by Mail:; If selected, you will receive emails which contain internet IP; FTP Service Settings; If you want to upload images to
INSTEON® Outdoor Wireless IP Camera insteon.com 29 1) Cannot connect to the server 2) Network Error. Please try later. 3) Server Error 4) Incorrect user or password 5) Sender denied by server. This may be because the server needed to authenticate the user, so check it and try again. 6) Receiver is d...
Page 32 - Alarm Service Settings
INSTEON® Outdoor Wireless IP Camera insteon.com 31 Click Submit, then click Test. The following screen will appear if successful: The following errors may occur: 1) Cannot connect to the server. Check that the FTP server is correct. 2) Network error; try later. 3) Server error 4) Incorrect username ...
Page 33 - ) Button turns red when motion is detected:; Select this option
INSTEON® Outdoor Wireless IP Camera insteon.com 32 If motion is detected after you enable Motion Detect Armed, the Alarm Status will update to Motion Detect Alarm. There are five alarm indicators: 1) Button turns red when motion is detected: 2) A beep will sound 3) The camera will automatically reco...
Page 36 - Upgrade Device Firmware
INSTEON® Outdoor Wireless IP Camera insteon.com 35 3.13 Upgrade Device Firmware For latest firmware updates, visit INSTEON.com. 3.14 Backup and Restore Settings Click Submit to save all the parameters you have set. These parameters will be stored in a .bin that can be restored to load the previously...
Page 37 - The log displays the users who have accessed the camera.
INSTEON® Outdoor Wireless IP Camera insteon.com 36 3.16 Reboot Device Click Reboot Device to power cycle the camera. To manually reboot, unplug the camera and plug it back in. 3.17 Log The log displays the users who have accessed the camera. Figure 3.36 3.18 Back This will take you back to the video...
Page 38 - Frequently Asked Questions; Why do I keep seeing “Subnet doesn’t match, dbclick to change”?
INSTEON® Outdoor Wireless IP Camera insteon.com 37 4. APPENDIX 4.1 Frequently Asked Questions Always confirm connectivity with your LAN and the internet prior to testing your camera. 4.1.1 I forgot my username and/or password Reset the administrator username and password by making sure the camera is...
Page 39 - the video and a yellow light
INSTEON® Outdoor Wireless IP Camera insteon.com 38 If ActiveX is running but you still cannot see live video, a red cross is displayed in the center of the video and a yellow light appears in the device status, change the port number (do not use port number 80). Note: Make sure that your firewall or...
Page 40 - IP Camera Tool can’t find the camera’s IP
INSTEON® Outdoor Wireless IP Camera insteon.com 39 2. The port that the camera is using is blocked by a firewall or anti-virus software. Try changing the port number. 3. Port forwarding is not successful (see How to Set DDN Service Settings in the Quick Start Guide). 4.1.5 IP Camera Tool can’t find ...
Page 41 - Default Parameters; Default network Parameters; admin; Port Forwarding Basics
INSTEON® Outdoor Wireless IP Camera insteon.com 40 4.1.10 Why won’t my camera connect wirelessly? If your camera cannot connect wirelessly after you enable the wireless settings, power cycle the camera by unplugging the power cable and plugging it back in. Make sure your wireless settings are correc...
Page 42 - Netgear
INSTEON® Outdoor Wireless IP Camera insteon.com 41 manual for device-specific port forwarding instructions. Netgear 1. Type your router’s address into an Internet browser. By default, this should be 192.168.0.1; the information should be provided in your router’s instructions or on the router itself...
Page 45 - OBTAINING TECHNICAL SUPPORT
INSTEON® Outdoor Wireless IP Camera insteon.com 44 Storage Humidity 0% ~ 90% non-condensing PC Requirements CPU 2.0GHZ or above Memory Size 256MB or above Display Card 64M or above Supported OS Microsoft Windows 2000/XP /Vista/Windows 7-32bit / Windows 7 -64bit / MAC OS Browser IE 6.0, IE7.0, IE8.0,...
