INSTEON 2843-422 - Manual
INSTEON 2843-422 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – About Open/Close Sensor
- Page 3 – Open/Close Sensor Hardware; Installation; Install Open/Close Sensor
- Page 4 – Connecting an External Sensor to Open/Close Sensor; INSTEON Setup; INSTEON Controllers, Responders and Links; Default Mode
- Page 5 – Make Open/Close Sensor a Controller; Make Open/Close Sensor a Controller of Multiple Responders
- Page 6 – Linking in Multi-Scene Mode; Unlinking in Multi-Scene Mode; Scenes
- Page 7 – Power Restore; Specifications
- Page 8 – Certification and Warranty
Page 1 of 9
2843-222/2843-422/2843-522 - Rev: 1/21/2014 7:18 AM
Open/Close Sensor
Owner’s Manual
2843-222 (US)
2843-422 (EU)
2843-522 (AUS/NZ)
Hardware Revision 1.9+
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 of 9 2843-222/2843-422/2843-522 - Rev: 1/21/2014 7:18:39 AM About Open/Close Sensor ............................................................................................................................................ 2 Open/Close Sensor Hardware ..........................................
Page 3 of 9 2843-222/2843-422/2843-522 - Rev: 1/21/2014 7:18:39 AM Open/Close Sensor Hardware Reed Switch Detects whether magnet is within ½” of the main case: • Closed state when magnet is within ½” • Opened state when magnet is further than ½” Jumper When jumper is installed (default), Open/Close ...
Page 4 of 9 2843-222/2843-422/2843-522 - Rev: 1/21/2014 7:18:39 AM • If installing on door, mount magnet as near door edge as possible (within ½” of sensor horizontally) and with one end of magnet aligned with set button and other end of magnet aligned with far end of sensor, gently press on door • ...
