INSTEON 2475S2 - Manual
INSTEON 2475S2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – In-LineLinc Relay – Features and Benefits; Features
- Page 4 – Quick Start Guide; Preparing to Install In-LineLinc; Tools Needed; Non-conductive probe; Installing In-LineLinc
- Page 5 – Enable power to the switch from the circuit breaker or fuse panel.
- Page 6 – Using In-LineLinc Relay; Using the ON and OFF Buttons; Tap ON button to turn load full-on; An Important Note About INSTEON Networks; dual-band INSTEON products; Using In-LineLinc Relay’s Sense Wire; Disabling the Sense Wire; Re-enabling the Sense Wire; In-LineLinc’s status LED will start blinking.
- Page 7 – Temporarily Disabling the Sense Wire; Linking In-LineLinc Relay as an INSTEON Responder; The load wired to In-LineLinc will respond appropriately.; Unlinking In-LineLinc Relay as an INSTEON Responder; twice
- Page 8 – Linking In-LineLinc Relay as an INSTEON Controller; Linking In-LineLinc Relay to Multiple Responders; Unlinking In-LineLinc Relay as an INSTEON Controller; ) Press and hold In-LineLinc’s Set button until it beeps again.; Advanced Features; Creating INSTEON Scenes
- Page 9 – Unlinking Multiple Responders from In-LineLinc Relay; Power Restore
- Page 10 – Setting the X10 Address; Additional Resources
- Page 12 – Troubleshooting; Problem
- Page 13 – Responder
- Page 14 – Certification and Warranty
Page 1 of 14
2475S2 - Rev: 1/21/2014 7:57 AM
In-LineLinc™ Relay
INSTEON
®
Remote Control In-Line On/Off Switch with Sense
Owner’s Manual (rev 5.1+)
(#
2475S2
)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 3 of 14 2475S2 - Rev: 1/21/2014 7:57 AM In-LineLinc Relay – Features and Benefits Congratulations on purchasing the high-quality INSTEON In-LineLinc Relay Switch with Sense. W ith its easy-install module, you can not only add conveniently hidden remote control to the lights wired to In-LineLinc...
Page 4 of 14 Rev: 1/21/2014 7:57 AM What’s in the Box? - In-LineLinc Relay - Quick Start Guide - Six (6) wire nuts Preparing to Install In-LineLinc CAUTIONS AND WARNINGS Read and understand these instructions before installing and retain them for future reference. This product is intended for instal...
Page 5 of 14 Rev: 1/21/2014 7:57 AM 6) Referring to the diagrams below, use the included wire nuts to connect the fixture’s Line, Load, Neutral, Ground and Sense wires (if using) to In-LineLinc’s corresponding wires. 7) Enable power to the switch from the circuit breaker or fuse panel. 8) Use In-Lin...
