INSTEON 2852-222 - Manual
INSTEON 2852-222 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Leak Sensor; INSTEON Controllers, Responders and Links; Add Leak Sensor to INSTEON Hub; Make Leak Sensor a Controller
- Page 4 – Test by tapping Leak Sensor Set button. Responder will turn on.; Remove Leak Sensor as a Controller (Unlink); LED will start blinking green; Factory Reset; All settings and scenes will be erased.
- Page 5 – Specifications; General
- Page 6 – Troubleshooting; Problem
- Page 7 – Certification and Warranty
Page 1 of 7 Rev: 10/28/2013 8:11 AM
Leak Sensor
INSTEON
®
Leak Sensor
Owner’s Manual
#
2852-222
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 3 of 7 Rev: 10/28/2013 8:11 AM Leak Sensor INSTEON Setup Some products have subtle differences in their setup procedures. Where necessary, please refer to the other device’s owner’s manual for details. INSTEON Controllers, Responders and Links Let’s define a few terms. • Each INSTEON compatible...
Page 4 of 7 Rev: 10/28/2013 8:11 AM 5) Test by tapping Leak Sensor Set button. Responder will turn on. 6) To add multiple responders, repeat steps 1-5 for each additional responder Remove Leak Sensor as a Controller (Unlink) 1) Press and hold Leak Sensor Set button until the status LED begins blinki...
Page 5 of 7 Rev: 10/28/2013 8:11 AM Specifications General Brand INSTEON Manufacturer product no. 2852-222, INSTEON Leak Sensor UPC 813922013078 Warranty 2 years, limited INSTEON INSTEON powerline mesh repeater No INSTEON RF mesh repeater No INSTEON controller Yes INSTEON responder No Maximum links/...
