INSTEON 2474DWH Manual - Free PDF Download

Page 3 - Features and Benefits

Page 3 of 15 2474DWH- Rev: 1/21/2014 7:30 AM About SwitchLinc 2-Wire Dimmer (RF) Features and Benefits • No Neutral wire required • Simple 2-wire connection replaces any wall switch • Controls incandescent lamps between 25W and 600W • Beeper and dual-color LED for easy setup • 32 brightness levels f...

Page 4 - Installation; SwitchLinc Wire

Page 4 of 15 2474DWH- Rev: 1/21/2014 7:30 AM CAUTIONS AND WARNINGS - Read and understand these instructions before installing and retain them for future reference. - This product is intended for installation in accordance with the National Electric Code and local regulations in the United States or ...

Page 6 - INSTEON Controllers, Responders and Links

Page 6 of 15 2474DWH- Rev: 1/21/2014 7:30 AM Local Control Follow these instructions to control the light/load (as well as any responders) from the dimmer paddle. INSTEON Setup Some products have subtle differences in their setup procedures. Please refer to the other device’s owner’s manual for deta...

Page 7 - Make SwitchLinc an INSTEON Responder; Make SwitchLinc an INSTEON Controller; Synchronizing Devices in Groups

Page 7 of 15 2474DWH- Rev: 1/21/2014 7:30 AM Note that a link is one way. If you wish to have two-way control, simply add a link from the responder to the controller. Make SwitchLinc an INSTEON Responder Follow the steps below to create a link, enabling another INSTEON device to control SwitchLinc. ...

Page 9 - Remove SwitchLinc as an INSTEON Responder; Factory Reset

Page 9 of 15 2474DWH- Rev: 1/21/2014 7:30 AM SwitchLinc will double-beep and LED stops blinking. 4) Test by tapping SwitchLinc on and off. Former responder will not respond. Remove SwitchLinc as an INSTEON Responder If you no longer want a controller or specific controller button to control SwitchLi...

Page 10 - Local Ramp Rate; Brightness Level

Page 10 of 15 2474DWH- Rev: 1/21/2014 7:30 AM Adjust Local Settings (optional) Local On-Level The local on-level is the brightness that the SwitchLinc will come on when turned on at the SwitchLinc paddle, with the default level at 100%. Local on-level can be set to any one of 32 fixed brightness lev...

Page 11 - Resume Dim; Change LED Brightness; Error Blink

Page 11 of 15 2474DWH- Rev: 1/21/2014 7:30 AM a. Go back to step 1 and repeat the process. b. Your Set button double-tap in step 2 might not have been fast enough, and you may have accidentually reprogrammed the local on-level instead. Note: HouseLinc (and other home automation software) will allow ...

Page 12 - Specifications; General

Page 12 of 15 2474DWH- Rev: 1/21/2014 7:30 AM Specifications General Product name SwitchLinc 2-W ire Dimmer (RF) - INSTEON Remote Control Dimmer Brand / manufacturer INSTEON Manufacturer product number 2474DWH UPC 813922010817 Warranty 2 years, limited INSTEON INSTEON powerline mesh repeater No INST...

Page 14 - Troubleshooting

Page 14 of 15 2474DWH- Rev: 1/21/2014 7:30 AM Troubleshooting Problem Possible Cause Solution LED won’t come on. SwitchLinc is not getting power. Make sure circuit breaker is on. Check the junction box wires to ensure all connections are tight and no bare wires are exposed. Check that a standard inc...

Page 15 - Certification and Warranty

Page 15 of 15 2474DWH- Rev: 1/21/2014 7:30 AM Certification and Warranty Certification This product has been thoroughly tested by Intertek - ETL SEMKO, a nationally recognized independent third-party testing laboratory. The North American ETL Listed mark signifies that the device has been tested to ...