Honeywell TB7300 - Manuals

BACNET INTEGRATION MANUAL FOR TB7200 & TB7300 SERIES THERMOSTATS 5 63-4524—01 NETWORK CONFIGURATION EIA-485 networks use a daisy chain configuration. A daisy chain means that there is only one main cable and every network device is connected directly along its path. Figure 1 illustrates two impr...

BACNET INTEGRATION MANUAL FOR TB7200 & TB7300 SERIES THERMOSTATS 63-4524—01 6 Maximum Cable Length The maximum length of a chain is related to its transmission speed. The longer the chain, the slower the speed. Using proper cable, the maximum length of an EIA-485 daisy chain is 4000-ft (1200 m)....

BACNET INTEGRATION MANUAL FOR TB7200 & TB7300 SERIES THERMOSTATS 63-4524—01 8 NETWORK ADAPTER The polarity of the connection to the cable is important. From one module to the other it is important that the same colored wire be connected to “plus” or “+” and the other colored wire be connected to...

BACNET INTEGRATION MANUAL FOR TB7200 & TB7300 SERIES THERMOSTATS 9 63-4524—01 INTEGRATION Global Commands The following figure shows which objects from the thermostat can be monitored and commanded from the BAS front-end. Fig. 6. Global commands from a BAS front-end to a typical TB7300 Series th...

BACNET INTEGRATION MANUAL FOR TB7200 & TB7300 SERIES THERMOSTATS 63-4524—01 10 TB7200 Integration – Graphical User Interface (GUI) objects The following objects should be typically used in a GUI: • Room Temperature (AV7); • Occupied and Unoccupied Heat Setpoints (AV 39 and AV43); • Occupied and ...

BACNET INTEGRATION MANUAL FOR TB7200 & TB7300 SERIES THERMOSTATS 11 63-4524—01 TB7300 Integration – Graphical User Interface (GUI) Objects The following objects should be typically used in a GUI: • Room Temperature (AV7); • Occupied and Unoccupied Heat Setpoints (AV 39 and AV43); • Occupied and ...

BACNET INTEGRATION MANUAL FOR TB7200 & TB7300 SERIES THERMOSTATS 63-4524—01 12 Configuration Objects The following objects and group objects should be typically used for configuration purposes: • General Options 1 Group GRP 45 and its complete list of objects; • General Options 2 Group GRP 55 an...

BACNET INTEGRATION MANUAL FOR TB7200 & TB7300 SERIES THERMOSTATS 13 63-4524—01 Graphical interfaces For example, some graphic interface might poll every data linked to the graphic page on a COV basis. If the 3 rd party device does not support COV, the graphic interface then relies on a pre-confi...

BACNET INTEGRATION MANUAL FOR TB7200 & TB7300 SERIES THERMOSTATS 63-4524—01 14 TROUBLESHOOTING Error / Trouble Condition Possible Cause Solution Thermostat does not come online Two or more controllers have the same MAC address. Modify each duplicate address to a unique number. The MS/TP network ...

BACNET INTEGRATION MANUAL FOR TB7200 & TB7300 SERIES THERMOSTATS 15 63-4524—01 APPENDIX TB7200 & TB7300 Series Protocol Implementation Conformance Statement (PICS) Vendor Name: Honeywell Product Name: TB7200 and TB7300 Series Thermostats TB7200 Product Description The TB7200 series BACnet co...

BACNET INTEGRATION MANUAL FOR TB7200 & TB7300 SERIES THERMOSTATS 63-4524—01 16 BACNET OBJECTS SUPPORTED Device Objects Table 4. Device Objects. Object Name Type and Instance Object Property Thermostat Parameter TB7200X5x14B TB73xxX5X14B Device Object_Identifier Property 75 (R,W) Unique ID number...

BACNET INTEGRATION MANUAL FOR TB7200 & TB7300 SERIES THERMOSTATS 17 63-4524—01 Objects Table Table 5. Objects. Object Name Type and Instance Object Property TB 7200 C5x 14B T B 72 00F 5x14 B TB 7300 A5x 14B TB 7305 A5x 14B TB 7300 C5x 14B TB 7305 C5x 14B TB 7350 C5x 14B TB 7355 C5x 14B T B 73 00...

BACNET INTEGRATION MANUAL FOR TB7200 & TB7300 SERIES THERMOSTATS 63-4524—01 20 Standard Object Types Supported Table 6. Standard object types supported. a Present_Value and Out_of_Service properties are writable for every AV objects except : • PI Heating Demand (AV21)• PI Cooling Demand (AV22) b...

BACNET INTEGRATION MANUAL FOR TB7200 & TB7300 SERIES THERMOSTATS 21 63-4524—01 Property Value Range Restrictions Table 8. Property value range restrictions. Object name Object Type and instance Minimum range value Maximum range value Default value Room Temperature AV 7 -39.9°F (-40°C) 121.9°F (5...

BACNET INTEGRATION MANUAL FOR TB7200 & TB7300 SERIES THERMOSTATS 63-4524—01 22 Property Enumeration Sets for BV & BI Objects Table 9. Property enumeration sets for BV and BI objects. (**) This object will be linked to the value of the “UI 3 Configuration” object. When the “UI 3 Configuration...

BACNET INTEGRATION MANUAL FOR TB7200 & TB7300 SERIES THERMOSTATS 23 63-4524—01 Enumeration Sets for MV Objects Table 10. Property enumeration sets for MV objects. NOTES: 1. Enumeration sets for MV16 depends on Sequence of Operation (MV15) value upon device discovery. If required enumeration is n...