Honeywell Series 90 - Manuals

Page 2 - ORDERING INFORMATION

SERIES 90 MODUTROL IV™ MOTORS 63-2190—3 2 ORDERING INFORMATION When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the TRADELINE® Catalog or price sheets for complete ordering number. If you have additional questions, need further informati...

Page 4 - SPRING RETURN MODEL SHOWN

SERIES 90 MODUTROL IV™ MOTORS 63-2190—3 4 Fig. 1. Modutrol IV Motor mounting dimensions in inches (mm). Table 3. Series 90 Modutrol Motor Power Consumption Ratings. Table 4. Auxiliary Switch Ratings (in Amps). a 40 VA pilot duty, 120/240 Vac on opposite contact. Internal Transformer Power Consumptio...

Page 5 - INSTALLATION; Location; CAUTION; Mounting; CAUTION

SERIES 90 MODUTROL IV™ MOTORS 5 63-2190—3 Table 5. Series 90 Modutrol Motor Timing and Torque Ratings. a Timings apply to all TRADELINE models. Some OEM models are available with non-standard timing/torque. b The torque rating for dual-ended shaft motors is the sum of the shaft torques (power-end to...

Page 6 - Adapter Bracket; Damper Linkages; Valve Linkages

SERIES 90 MODUTROL IV™ MOTORS 63-2190—3 6 Adapter Bracket The 220738A Adapter Bracket, positioned between the motor and the equipment, raises motor shaft height by 0.75 in. (19 mm) to match that of the former Modutrol ® Motor. The following applications require this bracket: • Q607 External Auxiliar...

Page 7 - SPRING RETURN

SERIES 90 MODUTROL IV™ MOTORS 7 63-2190—3 Fig. 3. Mounting the motor with an adapter bracket. Fig. 4. Mounting the motor on a Q5001 Valve Linkage. M452E EQUIPMENT BASE ADAPTER BRACKET STANDARD BOLTS (4) MOTOR BOLTS PROVIDED (4) WIRING BOX NON-SPRING RETURN SPRING RETURN 1 #12 OR 1/4" ZINC PLATED...

Page 8 - SETTINGS AND ADJUSTMENTS; Before Setting Stroke; Setting Stroke

SERIES 90 MODUTROL IV™ MOTORS 63-2190—3 8 SETTINGS AND ADJUSTMENTS Before Setting Stroke 1. Remove the top cover from the motor. 2. Disconnect the controller from the motor. 3. Connect a potentiometer to the motor as shown in Fig. 7. IMPORTANT Detach linkage from motor before adjusting stroke. Setti...

Page 9 - Auxiliary Switches

SERIES 90 MODUTROL IV™ MOTORS 9 63-2190—3 Fig. 6. Typical Series 90 wiring. Fig. 7. Wiring for potentiometer control. Fig. 8. Auxiliary switch schematic. Fig. 9. Stroke adjustment setup for non-spring return models. Auxiliary Switches Adjustable cams actuate the auxiliary switches. These cams can be...

Page 10 - Auxiliary Switch Adjustment; OPERATION

SERIES 90 MODUTROL IV™ MOTORS 63-2190—3 10 Auxiliary Switch Adjustment 1. Remove the top cover from the motor to gain access to the motor terminals and auxiliary cams. 2. Disconnect the controller from the motor. 3. Connect a potentiometer to the motor as shown in Fig. 7. 4. Using the potentiometer,...

Page 12 - CHECKOUT; Damper Application

63-2190—3 B.B. Rev. 1-02 www.honeywell.com/building/components SERIES 90 MODUTROL IV™ MOTORS Automation and Control Solutions Honeywell International Honeywell Europe S.A. Honeywell Latin American Honeywell Honeywell Limited-Honeywell Limitée Control Products 3 Avenue du Bourget Region 1985 Douglas ...

Honeywell Series 90 - Manuals

Manuals:

Manual Honeywell Series 90

Summary

Honeywell Manuals