Honeywell D - Manuals

Honeywell D – Manual in PDF format online.

Manuals:

Manual Honeywell D

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - T8112C,D ELECTRONIC PROGRAMMABLE THERMOSTATS; W Y G; Wiring Thermostat; CAUTION

69-0917—2 2 T8112C,D ELECTRONIC PROGRAMMABLE THERMOSTATS 1. Remove mounting plate from the wall, and drill 3/16 inch holes in wall (if drywall) as marked. Forfirmer material such as plaster or wood, drill7/32 inch holes. Gently tap anchors (provided) intodrilled holes until flush with the wall. 2. R...

Page 3 - Fig. 7. Typical hookup in three wire cool

69-0917—2 3 T8112C,D ELECTRONIC PROGRAMMABLE THERMOSTATS R Rc W Y G B D A C 2-WIRE HEAT-ONLY (JUMPER INTACT) M1709B L1(HOT) L2 POWER SUPPLY. PROVIDE DISCONNECT MEANS ANDOVERLOAD PROTECTION AS REQUIRED. 1 1 HEATINGRELAY ORVALVE COIL JUMPER R Rc W Y G B D A C 5-WIRE HEAT/COOL (JUMPER REMOVED) L1(HOT) ...

Page 4 - Mounting Thermostat on Mounting Plate; Engage tabs at the top of thermostat and mounting

69-0917—2 4 T8112C,D ELECTRONIC PROGRAMMABLE THERMOSTATS M1712A JUMPER (FACTORY-INSTALLED) REMOVE IF 5-WIRE SYSTEM INSERTSTRAIGHT UNDER SCREW HEAD 5/16 in. (8 mm)STRIP END OF WIRE VISIBLE HERE R Rc W Y G M3002A T8112C M5780 B. PRESS LOWER EDGE OF CASE TO LATCH. A. ENGAGE TABS AT TOP OF THERMOSTAT AN...

Honeywell Manuals