Honeywell CHRONOTHERM III T8611G- Manuals

Honeywell CHRONOTHERM III T8611G– User Manual in PDF format online.

Manuals:

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - FRONT VIEW OF

2 by— —drafts or dead spots behind doors, in corners or under cabinets. —hot or cold air from ducts.—radiant heat from sun or appliances—concealed pipes and chimneys.—unheated (uncooled) areas behind the thermostat, such as an outside wall. IF REPLACING AN EXISTING THERMOSTAT Turn off power to therm...

Page 6 - Fig. 9—Mounting the thermostat on subbase.; Checkout; CAUTION

Fig. 9—Mounting the thermostat on subbase. When the batteries are low, the display will flash REPL BAT. Homeowner will have 20-30 seconds to replace batter-ies after removing batteries from thermostat. After 20-30seconds, it will be necessary to reprogram. REPL BATindication will be disappear when t...

Page 7 - Perform the following test as a check of all thermostat

7 69-0348—1 mask no. and System Press Look for this Switch This Response Position Key Key Down Key Released OFF 03 Blank 07 Blank 15 Blank COOL or 15 Cooling, fan and 15 Cooling, fan and OFF 06 Blank 02 Blank 05 Blank 04 Blank 01 Blank 00 Blank 12 See note A OFF 08 Blank 13 Microprocessor 09 Blank 1...

Honeywell Manuals