Honeywell 1952 - Manuals - manualsarea.com

Page 2 - Getting Started; When the

1 Agency Model: 1952/1952-BF/ CCB-H-010BT/ CCB-H-010BT-BF Note: Refer to your User Guide for information about cleaning your device. Getting Started Turn off computer’s power before connecting the scanner, then power up the computer once the scanner is fully connected. When the base is connected and...

Page 3 - If you are charging the scanner using the USB cable, the

2 Connecting the Scanner USB: Note: If you are charging the scanner using the USB cable, the current available for charging is reduced and charge times are increased. Charging via the power supply is faster. CCB01-010BT or CCB01-010BT-BF Base: CCB-H-010BT or CCB-H-010BT-BF Base:

Page 7 - If the scanner beeps 3 times when; Standard Product Defaults

6 Reading Techniques The view finder projects an aiming beam that should be centered over the bar code, but it can be positioned in any direction for a good read. Note: If the scanner beeps 3 times when scanning a bar code, the link has not been established. If the scanner beeps once, the link has b...

Page 8 - For additional RS485 interface selections, see the; USB Serial

7 RS485 Interface The RS485 interface defaults to port 5B. If you have an IBM POS terminal using port 9B, scan the appropriate code below to pro- gram the terminal, then power cycle the cash register. IBM Port 9B HHBCR -1 Interface IBM Port 9B HHBCR -2 Interface Note: For additional RS485 interface ...

Page 11 - Locked Link Mode; Unlink Scanner; Override Locked Scanner; bar code with; Override Locked Scanner

Locked Link 10 If you link a scanner to a base using the Locked Link Mode, other scanners are blocked from being linked if they are inad- vertently placed into the base. If you do place a different scan- ner into the base, it will charge the scanner, but the scanner will not be linked. Locked Link M...

Page 12 - bar code to unlink a; The following bar codes will allow you to use the scanner in; Manual Trigger - Normal Mode; Presentation Mode continuously draws power, so use of; Manual Trigger - Normal

Unlinking the Scanner 11 If the base has a scanner linked to it, that scanner must be unlinked before a new scanner can be linked. Once the previous scanner is unlinked, it will no longer communicate with the base. Scan the Unlink Scanner bar code to unlink a scanner. Trigger Unlink Scanner The foll...

Page 13 - Streaming Presentation Mode; If you want a carriage return after the bar code, scan the; Add; bar code. To add a tab after the bar code, scan; Add Tab Suffix; bar; Add CR Suffix

12 Streaming Presentation™ When in Streaming Presentation mode, the scanner leaves the scan illumination on all the time and continuously searches for bar codes. Suffix Streaming Presentation Mode If you want a carriage return after the bar code, scan the Add CR Suffix bar code. To add a tab after t...

Page 14 - Add Code ID Prefix To All Symbologies; Note: For a complete list of Code IDs, see the User’Guide for your; Function Code Transmit; Enable

13 Add Code ID Prefix to all Symbologies Scan the following bar code if you wish to add a Code ID prefix to all symbologies at once. Add Code ID Prefix To All Symbologies (Temporary) Note: For a complete list of Code IDs, see the User’Guide for your product. Function Code Transmit When this selectio...

Page 15 - Yellow; Support

14 Charge Pack Status - Xenon XP 1952gBF only The following charge status feedback is provided by a Xenon XP 1952fBF scanner when the scanner is out of the base and has been idle for 5 seconds. Scanner LED Scanner Beep Char ge Level Approximate Expected Scans Yellow 3 sets of flashes 2 short beeps p...

Page 16 - Product documentation is available at; Limited Warranty; For warranty information, go to; Get Resources > Product Warranty; Patents; For patent information, see; Disclaimer

15 Product Documentation Product documentation is available at www.honeywellaidc.com . Limited Warranty For warranty information, go to www.honeywellaidc.com and click Get Resources > Product Warranty . Patents For patent information, see www.hsmpats.com . Disclaimer Honeywell International Inc. ...

Honeywell 1952 - Manuals

Manuals:

User Manual Honeywell 1952

Summary

Honeywell Manuals