Honeywell 00005 - Manuals

VAVi-7u5-IP, VAVi-0-IP et VAVi-7u5-IP-BLE Alerton VAV IP Field Controller ® Marque de commerce déposée aux États-Unis. Tous droits réservés 31-00523M-05 Rev 01-24 Droits d'auteur © 2024 Honeywell Inc. INSTRUCTIONS D’INSTALLATION AVERTISSEMENT ! Installez toujours l'équipement conformément au Code na...

8 31-00523M-05 Rev 01-24 VAV IP Contrôleur - Instructions d’installation L'ALIMENTATION ÉLECTRIQUE AVERTISSEMENT ! Risque d’électrocution. Peut causer des blessures graves, la mort ou des dommages matériels. Débrancher l’alimentation électrique avant de commencer l’installation afin de prévenir les ...

9 31-00523M-05 Rev 01-24 VAV IP Controllers - Installation Instructions • Brancher l'équipement sur un circuit différent de celui sur lequel le récepteur est raccordé. • Consultez le revendeur ou un technicien radio ou TV expérimenté pour obtenir de l'aide. CANADIAN REGULATORY STATEMENT This device ...

ALERTON 715, Peachtree Street, N.E. Atlanta, GA 30308 USA. www.alerton.com E-mail: [email protected] Peut être modifié sans préavis. 31-00523M-05 Rev 01-24 VAV IP Controllers - Installation Instructions ÉLIMINATION ET RECYCLAGE Directive 2012/2019/CE relative aux déchets d'équipements électriques et...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 31-00475-01 6 Communications Modbus Client Sylk™ Supported Devices Differential Pressure Sensor Weight And Dimensions Table 7 Communication Specification Parameter Specification Protocol supported BACnet IP, BACnet MSTP, Sylk™, Modbus RTU (Modb...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 7 31-00475-01 Universal IO Solid State Relay (SSR) Wireless Connectivity Table 12 Universal IO Specification Parameter Specification AO (Analog output) Voltage: 0(2) to 10 VDC direct or reverse with -3 mA to 20 mA Current: 0 (4) to 2 0 mA UI (U...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 31-00475-01 8 HARDWARE OVERVIEW IP Model Fig. 3 IP Model Hardware Overview MSTP Model Fig. 4 MSTP Model Hardware Overview 6(59ආ&(%87721 6\ඇNŒ:$// 02'8/(6 9$& 32:(5 62/ආ'67$7( 5(/$<6665 )ආ(/'5(3/$&($%/( $ආ5)/2:6(1625 '(&/87&am...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 9 31-00475-01 Service Button Fig. 5 Service Button Location The service button is used to trigger dedicated events. It is important to distinguish different controller behaviors which are elicited depending upon whether the service button is pr...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 31-00475-01 10 NOTE: Mount the actuator flush with damper housing or add a spacer between the actuator mounting sur - face and damper box housing. Fig. 8 Mounting Controller to VAV Box Damper Housing when Actuator is not Parallel to VAV Box Dam...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 11 31-00475-01 cator on the bracket represents approximately 6.5 ° of rotation per side. The declutch button, when pressed, allows you to rotate the universal shaft adapter. The unit is shipped with the actuator set to rotate open in the clockw...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 31-00475-01 12 Airflow Sensor Connection Connect the airflow pickup to the two restrictor ports on the controller. NOTE: Use 1/4 in. (6 mm outside diameter and 5 mm inner diameter), with a 3/64 in. (1 mm) wall thick - ness, plenum-rated 1219 FR...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 13 31-00475-01 Airflow Sensor Replacement Procedure to replace the airflow sensor is as follows: 1. Gently pull the sensor cover outward and rotate it by 75 ° . Fig. 12 Removing the Airflow Sensor Cover 2. Disconnect the electrical connector by...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 31-00475-01 14 POWER SUPPLY General Information To prevent a risk of injury due to electrical shock and/or damage to the device due to short-circuiting, low- voltage and high-voltage lines must be kept physically separate. To prevent a risk of ...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 15 31-00475-01 Power Wiring Examples Fig. 14 Power Wiring Examples UL Listed Class 2 Transformer 100 VA 120 / 240 VAC 3 2 1 ~ V0 Spyder Model 7 COM 24 VAC Earth Ground 1 1 WHEN CONNECTING POWER TO THE SPYDER MODEL 7 CONTROLLERS, CONNECT THE COM...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 31-00475-01 16 INPUT / OUTPUT WIRING Wiring Requirements NOTE: When attaching two or more wires to the same terminal, other than 14 AWG (2.0 mm 2 ), be sure to twist them together. Deviation from this rule can result in improper electrical cont...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 17 31-00475-01 Internal Wiring Examples IP Model Internal Wiring Fig. 16 IP Model Internal Wiring MSTP Model Internal Wiring Fig. 17 MSTP Model Internal Wiring

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 31-00475-01 18 Terminal Connections All the terminals for this controller are removable. Table 15 Terminal Connections Terminal Label Description Power 24 VAC 1 Earth ground (connected to building earth ground) 2 V0 Power supply voltage (connec...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 19 31-00475-01 UIO Wiring Examples Fig. 18 Universal IO Wiring Examples NOTE: A protective diode is recommended, such as 1N4001, to protect the controller from the relay’s voltage EMF. The rating of the diode must be 11 V and 22 mA maximum. 19 ...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 31-00475-01 20 SSR (DO) Wiring Examples Fig. 19 SSR (DO) Wiring Examples NOTE: • SR IN (terminal 5, SSR power input) is connected to AC OUT (terminal 4, 24 VAC~ output) by a jumper wire provided by the factory. • Remove the jumper if you want t...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 21 31-00475-01 NETWORK CONCEPTS The RS-485 Standard According to the RS-485 standard (TIA/EIA 485: “Electrical Characteristics of Generators and Receivers for Use in Balanced Digital Multipoint Systems”), only one driver communicating via an RS...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 31-00475-01 22 BACNET IP CONTROLLER DHCP IP Configuration A new controller from the factory has DHCP enabled by default. • For the first 15 seconds after powering the controller, a search for a DHCP server will be performed to acquire an IP add...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 23 31-00475-01 5. Tighten the wire terminal nut by turning the nut clockwise. Do not over-tighten. Fig. 25 Installing a Remote Antenna Remote Antenna Placement Place and align the antenna in a way that the BLE signal does not interfere with any...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 31-00475-01 24 BACNET MSTP WIRING The MSTP variants of the Spyder Model 7 VAV controller use the BACnet MSTP communication protocol. The controller’s data is presented to other controllers over a twisted-pair MSTP network, using the TIA/EIA 485...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 25 31-00475-01 NOTE: The 120 Ω termination resistor must be inserted directly into the terminals of both end devices. NOTE: The controller is insensitive to bias voltages due to the failsafe chipset inside, and it can share the BACnet bus with ...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 31-00475-01 26 For example, if only DIP switches 1, 3, 5, and 7 are ON, the MAC address would be 85 (1 + 4 + 16 + 64 = 85). Fig. 31 Calculating the MAC Address Configure the Device Instance Number The Device Instance number must be unique acros...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 27 31-00475-01 MODBUS RTU The controller features a removable 2-wire with shield, non-isolated, RS-485 interface suitable for Modbus communication (terminal 16, 17, and 18). The terminal block containing it is gray. The controller can function ...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 31-00475-01 28 SYLK™ BUS Sylk™ Bus compatible wall modules such as TR120 can be connected to the controller's Sylk™ (terminals 14 and 15). • Sylk™ is a two wire, polarity insensitive bus.• The maximum current provided at the Sylk™ bus interface...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 29 31-00475-01 BLUETOOTH BALANCING The antenna facilitates wireless communication via Bluetooth with other devices. Overview The Honeywell Connect Mobile (HCM) is a mobile application used for VAV balancing. The HCM app provides easy access to ...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 31-00475-01 30 TROUBLESHOOTING The controller features the following LEDs. Fig. 35 LED Interface BACnet and Modbus LED Status Table 24 BACnet and Modbus LED Status Mode Status Tx and Rx LED Status Visual BACnet Tx1 Fail OFF BACnet Tx1 Success B...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 31 31-00475-01 Bluetooth LED Status Controller LED Status Table 25 Bluetooth LED Status Mode LED Status Visual BLE disabled by user OFF BLE normal operation and connected Green, permanently ON. BLE enabled but not connected Green, 2 blinks in 1...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 31-00475-01 32 REGULATORY INFORMATION FCC Regulation This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept a...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 33 31-00475-01 Standards and Compliance • CE • UL916 Energy Management Equipment • UL60730 • FCC Part 15; Class A verified • EN 55022; Class A • EN 61000-3-2 • 61000 • UL2043 Approvals and Certifications • UL 60730-1, Standard for Automatic Ele...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 31-00475-01 34 APPENDIX Sensor Input Accuracy The controller's internal sensor inputs support both 10 K NTC Ω and 20 K NTC Ω sensors. The following table lists the typical minimum accuracies of the hardware and software for these temperature se...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 35 31-00475-01 Recognition of Sensor Failure of Sensor Inputs The thresholds at which the sensor fails, that is, sensor breaks (SB) and short-circuits (SC), are recognized, depending upon the given sensor type. In the event of a recognized sens...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 31-00475-01 36 Sensor Characteristics The characteristics (resistance in relation to temperature) of the sensors and the resultant voltage are listed on the following pages. The stated values do not include failures due to sensor failures, wiri...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 31-00475-01 38 10 K NTC TYPE III Characteristics Table 32 10 K NTC TYPE III Characteristics Temp. [°F] Temp. [°C] Resistance [ Ω ] Temp. [°F] Temp. [°C] Resistance [ Ω ] -35 -37.2 203.6K 105 40.6 5479 -30 -34.4 173.6K 110 43.3 4947 -25 -31.7 14...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 39 31-00475-01 10 K3A1 Characteristics Table 33 10 K3A1 Characteristics Temp. [°F] Temp. [°C] Resistance [ Ω ] Temp. [°F] Temp. [°C] Resistance [ Ω ] -40 -40 336098 26.6 -3 38110 -38.2 -39 314553 28.4 -2 36184 -36.4 -38 294524 30.2 -1 34366 -34...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 31-00475-01 40 93.2 34 6807 159.8 71 1693 95 35 6530 161.6 72 1637 96.8 36 6266 163.4 73 1582 98.6 37 6014 165.2 74 1530 100.4 38 5774 167 75 1480 102.2 39 5544 168.8 76 1432 104 40 5325 170.6 77 1385 105.8 41 5116 172.4 78 1341 107.6 42 4916 1...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 31-00475-01 42 20 K NTC Characteristics Table 34 20 K NTC Characteristics Temp. [°F] Temp. [°C] Resistance [K Ω ] Terminal voltage [V] Temp. [°F] Temp. [°C] Resistance [K Ω ] Terminal Voltage [V] -58 -50 1659 8.78 5 -15 164 7.83 -56.2 -49 1541 ...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 43 31-00475-01 68 20 25.3 4.75 134.6 57 5.08 1.66 69.8 21 24.2 4.64 136.4 58 4.88 1.61 71.6 22 23 4.53 138.2 59 4.69 1.56 73.4 23 22 4.43 140 60 4.52 1.51 75.2 24 21 4.32 140 60 4.52 1.51 77 25 20 4.22 141.8 61 4.35 1.46 78.8 26 19.1 4.12 143.6...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 45 31-00475-01 Nickel Class B DIN 43760 Sensors The characteristic of the nickel temperature sensor is specified as per DIN 43760. The large Temperature Coefficient of Resistance (TCR) of the Ni-RTD, 6178 ppm/K, offers greater sensitivity than ...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 31-00475-01 46 NI1000 TK5000 DIN B R-T Characteristics of Ni1000 TK5000 DIN B. Table 36 NI1000 TK5000 Sensor Specification Sensor Type Nominal Resistance Sensitivity Ni1000 TK5000 DIN B R 0 : 1000 Ω TC: 5000 ppm/K Table 37 R-T Characteristics (...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS 47 31-00475-01 PT100 Characteristics Table 38 PT100 Characteristics Temp. [°F] Temp.[°C] Resistance [ Ω ] -30 -34.44 86 -20 -28.89 89 -10 -23.33 91 0 -17.78 93 10 -12.22 95 20 -6.67 97 30 -1.11 100 32 0.00 100 40 4.44 102 50 10.00 104 60 15.56 ...

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS Honeywell Building Technologies 715 Peachtree St NE Atlanta, Georgia 30308 customer.honeywell.com buildings.honeywell.com ® U.S. Registered Trademark ©2022 Honeywell International Inc. 31-00475-01 I Rev. 06-22 The material in this document is f...

5 31-XXXX-XX Prelim Draft - Brand Neutral BACNET IP/MSTP VAV - INSTALLATION INSTRUCTION SPECIFICATIONS Electrical Voltage Range: 20-30 VAC; Class 2 transformer Nominal Power Consumption: — IP variant: 8VA; Controller and actuator load (nothing connected to IO's and COM) — MSTP variant: 6VA; Controll...

31-XXXX-XX 6 Prelim Draft - Brand Neutral BACnet IP/MSTP VAV Controller - INSTALLATION INSTRUCTION Wireless Connectivity Table 3. Connectivity Frequency Range Connectivity Medium Frequency range E.I.R.P for CE E.I.R.P for FCC/IC Bluetooth 2400 MHz- 2483.5 MHz 20 mW 20 mW

7 31-XXXX-XX Prelim Draft - Brand Neutral BACNET IP/MSTP VAV - INSTALLATION INSTRUCTION IMPORTANT: Mount the actuator flush with damper housing or add a spacer between the actuator mounting sur- face and damper box housing. MOUNTING To mount the BACnet IP/MSTP VAV refer the mounting instructions(XX-...

31-XXXX-XX 8 Prelim Draft - Brand Neutral BACnet IP/MSTP VAV Controller - INSTALLATION INSTRUCTION NOTE: Tools Required: — Phillips #2 screwdriver for end-limit set screw adjust- ment — 8 mm wrench for centering clamp The actuator mounts directly onto the VAV box damper shaft and has up to 44 in-lb....

9 31-XXXX-XX Prelim Draft - Brand Neutral BACNET IP/MSTP VAV - INSTALLATION INSTRUCTION NOTE: NOTE: IMPORTANT: The pressure sensor is polarity insensitive. Pickup tubes can be connected to either restrictor port irrespective of marking on the sensor. 4. If the damper rotates counterclockwise (CCW) t...

31-XXXX-XX 10 Prelim Draft - Brand Neutral BACnet IP/MSTP VAV Controller - INSTALLATION INSTRUCTION effect past the heater and tends to keep most dust off the bridge structure. The heat affect, along with a simple filter, can help to keep the dust from causing output shifts in the output of the devi...

11 31-XXXX-XX Prelim Draft - Brand Neutral BACNET IP/MSTP VAV - INSTALLATION INSTRUCTION + - IOx GN D Output Type Load 0 to 10 Vdc, 10 mA max. •1k  4 to 20 mA ”550  IN 0V 0V IN 0V IN WIRING 7 x Universal Input/Output (UIO) Output Connection Example Input Connection Example Volatage Inputs ensure...

31-XXXX-XX 12 Prelim Draft - Brand Neutral BACnet IP/MSTP VAV Controller - INSTALLATION INSTRUCTION NOTE: NOTE: CAUTION IMPORTANT: Power must be off prior to connecting to or removing connections from the 24 VAC power (24 V~/24 V0), and 20 VDC power (20 VDC) terminals. Use the heaviest gauge wire av...

13 31-XXXX-XX Prelim Draft - Brand Neutral BACNET IP/MSTP VAV - INSTALLATION INSTRUCTION Supply voltage: 24 Vac (20 to 30 Vac) 50/60 Hz Important: Where multiple devices are powered from a single transformer, the same side of the transformer secondary must be connected to the same power input termin...

31-XXXX-XX 14 Prelim Draft - Brand Neutral BACnet IP/MSTP VAV Controller - INSTALLATION INSTRUCTION NOTE: NOTE: NOTE: When attaching two or more wires to the same ter- minal, other than 14 AWG (2.0 mm2), be sure to twist them together. Deviation from this rule can result in improper electrical conta...

15 31-XXXX-XX Prelim Draft - Brand Neutral BACNET IP/MSTP VAV - INSTALLATION INSTRUCTION NOTE: NOTE: NOTE: The maximum BACnet MS/TP network Bus seg- ment length is 4,000 ft. (1200 m) using recom- mended wiring. Repeaters must be used when making runs longer than 4,000 ft. (1200 m). A maximum of thre...

31-XXXX-XX 16 Prelim Draft - Brand Neutral BACnet IP/MSTP VAV Controller - INSTALLATION INSTRUCTION NOTE: L* C MSTP VAV #1 ONTROLLER C MSTP VAV #2 ONTROLLER C ONTROLLER #..N MSTP VAV C ONTROLLER PLANT ϭϮϬɏ ϭϮϬɏ Termination Resistors Matched terminating resistors are required at each end of a segment...

17 31-XXXX-XX Prelim Draft - Brand Neutral BACNET IP/MSTP VAV - INSTALLATION INSTRUCTION NOTE: Supervisor/ Web Browser #1 #2 #3 BACNET IP Table 9. Default IP Address Static IP Address 0.0.0.0 Subnet Mask 0.0.0.0 Default Gateway 0.0.0.0 Connecting to a IP network BACnet IP VAV controller communicates...

31-XXXX-XX 18 Prelim Draft - Brand Neutral BACnet IP/MSTP VAV Controller - INSTALLATION INSTRUCTION SMA Connector Local Antennae SMA Connector Terminal nut Remote Antennae Antenna IP and MSTP VAV controller has a local rubber antenna included in the kit. The antenna facilitates wireless communicatio...

19 31-XXXX-XX Prelim Draft - Brand Neutral BACNET IP/MSTP VAV - INSTALLATION INSTRUCTION NOTE: Surface • Do not install the antenna close to the floor. Figure 19. Remote Antennae Placement • The Local antenna can be used when the IP and MSTP VAV controller is installed in a plastic cabinet/enclosure...

31-XXXX-XX 20 Prelim Draft - Brand Neutral BACnet IP/MSTP VAV Controller - INSTALLATION INSTRUCTION NOTE: NOTE: Each Modbus segment will require its own line polar- ization and line termination. MODBUS The controller features a removable non-isolated RS485 interface suitable for Modbus communication...

21 31-XXXX-XX Prelim Draft - Brand Neutral BACNET IP/MSTP VAV - INSTALLATION INSTRUCTION NOTE: NOTE: — Must conform to TIA/EIA 485 cabling guidelines. See “TIA/EIA 485 Cable Specifications” on page 14. — Should not extend beyond a single building. — It is recommended that you select a low baud rate ...

31-XXXX-XX 22 Prelim Draft - Brand Neutral BACnet IP/MSTP VAV Controller - INSTALLATION INSTRUCTION NOTE: NOTE: NOTE: Automatic MAC addressing will be enabled only if dip switches are all-on or all-off. COMMISSIONING Automatic MAC Addressing In contrast to other controllers, the BACNET MSTP controll...

23 31-XXXX-XX Prelim Draft - Brand Neutral BACNET IP/MSTP VAV - INSTALLATION INSTRUCTION Table 13. Status LED and power LED behaviors Mode Power failure inputs required Device error (a Firmware Download No application Broken sensor Short-circuiting Auto-MAC Unacknowledged alarm Normal operation (a R...

31-XXXX-XX 24 Prelim Draft - Brand Neutral BACnet IP/MSTP VAV Controller - INSTALLATION INSTRUCTION IMPORTANT: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. REGULATORY INFORMATION FCC Reg...

25 31-XXXX-XX Prelim Draft - Brand Neutral BACNET IP/MSTP VAV - INSTALLATION INSTRUCTION CERTIFICATIONS, ETC. Approvals and Certifications — UL 60730-1, Standard for Automatic Electric Controls for Household and Similar Use, Part 1: General Requirements; — CAN/CSA-E60730-1:02, Standard for Automatic...

31-XXXX-XX 26 Prelim Draft - Brand Neutral BACnet IP/MSTP VAV Controller - INSTALLATION INSTRUCTION NOTE: NOTE: NOTE: This is the accuracy of the internal sensor input (hardware + software [linearization]), only. This table does not include the characteristics of the sensors, themselves (see section...

27 31-XXXX-XX Prelim Draft - Brand Neutral BACNET IP/MSTP VAV - INSTALLATION INSTRUCTION NTC10K TYPE II Temp. [°F] Temp. [°C] Resistance [KΩ] Terminal voltage [V] -22 -30 177 7.904 -20.2 -29 166.35 7.848 -18.4 -28 156.413 7.79 -16.6 -27 147.136 7.73 -14.8 -26 138.47 7.666 -13 -25 130.372 7.601 -11.2...

31-XXXX-XX 30 Prelim Draft - Brand Neutral BACnet IP/MSTP VAV Controller - INSTALLATION INSTRUCTION Nickel Class B DIN 43760 sensors The characteristic of the nickel temperature sensor is specified as per DIN 43760. The large Temperature Coefficient of Resistance (TCR) of the Ni-RTD, 6178 ppm/K, off...

31-XXXX-XX 32 Prelim Draft - Brand Neutral BACnet IP/MSTP VAV Controller - INSTALLATION INSTRUCTION NI1000TK5000 Sensor Type Nominal Resistance Sensitivity Ni1000 TK5000 DIN B R 0 : 1000 Ω TC: 5000 ppm/K °F °C 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -58 -50 790.88 -40 -40 830.84 826.8 822.78 818.76 814.75 810....

Prelim Draft - Brand Neutral BACNET IP/MSTP VAV - INSTALLATION INSTRUCTION Prelim Dra ft - Bra nd Neutral RELATED TECHNICAL LITERATURE Table 17. Related Technical Literature Title Reference Spyder Model 5 & 7 – Engineering Tool User Guide 31-00282 Spyder Model 5 & 7 – Function Block User Gui...