Henny Penny 290 - Manuals

Model 290 Problem Cause Correction POWER SECTION With switch in • Open circuit • Check to see that unit is POWER position, plugged in the fryer is com- • Check the breaker or fuse pletely inoperative at supply box (NO POWER) • Check voltage at wallreceptacle • Check MAIN POWERswitch; replace if defe...

Model 290 Problem Cause Correction HEATING OF SHORTENING SECTION (Continued) Heating of shortening • Low or improper voltage • Use a meter and check the too slow receptacle against data plate • Weak or burnt out element(s) • Check heating element(s) per Heating Elements Section • Points in contactor...

Model 290 1-4. ERROR CODES (Continued) CE Only - Along with the error codes from page 1-11, CEunits have the following self-diagnostic error codes: DISPLAY CAUSE PANEL BOARD CORRECTION “E10” High limit Reset the high limit by manually pushing up on the red resetbutton; if the high limit does not res...