Henny Penny PFG-691 - Manual
Henny Penny PFG-691 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTRUCTIONS
- Page 3 – Optional Ramp Unloading
- Page 5 – The proper location of the fryer is very important for operation,; LOCATION
- Page 7 – Installing a
- Page 9 – The gas pressure regulator on the gas control valve is; REGULATOR SETTING
Model 691
This section provides the installation and unpacking instructions
for the Henny Penny PFG-691.
Installation of this unit should be performed only by a
qualified service technician.
Do not puncture the fryer with any objects such as
drills or screws as electrical shock or component damage
could result.
Any shipping damage should be noted in the presence of the
delivery agent and signed prior to his or her departure.
1.
Cut and remove the plastic bands from the main box.
2.
Remove the box lid and lift the main box off the fryer.
3.
Remove four corner packing supports.
4.
Cut the stretch film from around the carrier/rack box and
remove it from the top of the fryer lid.
5.
Cut and remove the metal bands holding the fryer to the pallet.
All counterweights must be loaded before unlatching the
lid, or personal injury could result.
6.
Remove the fryer from the pallet.
Take care when moving the fryer to prevent personal
injury. The fryer weighs approximately 935 lbs. (424 kg).
1104
2-1
SECTION 2. INSTALLATION
2-2. UNPACKING
INSTRUCTIONS
2-1. INTRODUCTION
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Model 691 7. Remove the counterweights, which are strapped to thepallet under the fryer, from the pallet. Do not drop. The counterweights weigh approximately18 lbs. (8.1 kg) each. Handle with care, or personalinjury could result. 8. Remove rear service cover. 9. Load the 7 weights into the counterwe...
Model 691 2-3. SELECTING THE FRYER The proper location of the fryer is very important for operation, LOCATION speed, and convenience. Choose a location which provides easyloading and unloading without interfering with the final assembly offood orders. Operators have found that frying from raw to fin...
