Havis-Shields P-MFK-5 - Manuals

Havis-Shields P-MFK-5 – Manual in PDF format online.

Manuals:

Manual Havis-Shields P-MFK-5

1 Page 1
2 Page 2
3 Page 3
4 Page 4

Summary

Page 2 - Always; Use hardware provided with install kit; “B” PILLAR MOUNTING BRACKET:

P-MID-1^MFK-5_INST_9-07 SUB ASSEMBLY: 1. Remove “C” pillar trim panel. This is necessary for driver side mounting bracket. 2. Position upper center filler to partition and mark mounting holes. 3. Drill 5/16” holes on marks. Always ! Read all instructions before installing any Havis-Shields Equipment...

Page 3 - Plastic trim panel must be notched around bracket to mount.; ATTACH PASSENGER SIDE MOUNTING BRACEKT:; Tighten all hardware.; Passenger side upper

P-MID-1^MFK-5_INST_9-07 serrated nuts. • Press partition as far forward and mark mounting holes where driver side mounting bracket and “C-pillar” come in contact. • Pre-drill 3/16” holes into “C-pillar”. • Attach bracket to C-pillar using (3) ¼” x 1” Hex head lag bolts. • Plastic trim panel must be ...

Page 4 - Position on front row bench in van close side doors.; Driver side upper lexan filler

P-MID-1^MFK-5_INST_9-07 5. ATTACH DRIVER SIDE UPPER LEXAN FILLER PANEL: • Position driver side ¼” lexan filler panel to partition so that minimal space is between the vehicles window, (or window guard) and the lexan filler. NOTE: It is necessary to keep a 1/8” gap between the window or guard and the...

Havis-Shields Manuals