Havis-Shields KK-K9-F12-K - Manual
Havis-Shields KK-K9-F12-K – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
INSTALLATION INSTRUCTIONS KK-K9-F12-K
2000-2006 FORD EXCURSION
TOOLS REQUIRED:
Power Drill
Standard & Metric Socket Sets
Phillips Screw Driver
7/16” Wrench
Wire Cutters / Crimping tool
Ratchet Wrench With 6” Extension
Torx Bit Set
4 ½” Hole Saw (Exhaust Fan Option)
Caulk Gun
HARDWARE:
Some of this hardware is already attached.
QTY: DESCRIPTION: PART
#:
28
¼-20 X ½” Stainless carriage bolts
GSM 32022
30
¼-20 X ¾” Stainless carriage bolts
GSM 32024
64
¼-20 Serrated nuts
GSM 30023
6
¼-20 X ¾” Hex head Cap Screw Zinc
GSM33001
14
¼” X 1 ½” Hex head lag screw
GSM 33062
36
#12 X ¾” Stainless sheet metal screws
GSM 34177
24
#10 X ¾” Stainless sheet metal screws
GSM 34170
22
#10 X ½” Stainless sheet metal screws
GSM 34169
6
#10 X ¾” Sheet metal screws
GSM 33195
20
#10 X ½” Sheet metal screws
GSM33194
1
Tube Silver Caulk
PRM 97343
1
46” X 45 1/2” Rubber Mat
KNM01029-SUV
11 1/2 feet Adhesive Molding
SUB ASSEMBLY:
•
Dome light with wire
•
Tunnel edge molding
•
Install exhaust fans (Optional). If locating in custom
location drill 4 ½” hole into desired location of K-9
housing. Mark and drill 3/16” mounting holes to
attach fan using (4) 10/32” X ½” machine screws and
10/32” keps nuts. Then mark and drill 3/16” holes to
mount fan guard using 10/32” X ½” machine screws
and 10/32” keps nuts.
INSTALLATION:
1. Remove interior:
•
Remove rear seats
•
Remove rear seat belt assembly
•
Remove top, and bottom plastic rear trim caps
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
