Havis-Shields GSM32024 - Manual
Havis-Shields GSM32024 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Assembled K9 Transportation System for; Front of Unit
- Page 5 – oor; Note: Mounting plate; Set height at 7 3⁄4”
- Page 6 – Note: Use 1⁄2”long bolts on double skin and 3⁄4”long on triple skin.; Top Inner Screw
- Page 7 – Final Installation Steps:
INSTALLATION INSTRUCTIONS KK-K9-F14-K
K9 TRANSPORTATION SYSTEM
2003-2009 EXPEDITION
TOOLS REQUIRED:
Power Drill
Drill Bit Set
Standard & Metric Socket Sets
Phillips Screw Driver
Open End Wrench Set
Wire Cutters / Crimping tool
Ratcheting Wrench Extension
Torx Bit Set
4 ½” Hole Saw (Exhaust Fan Option)
Caulk Gun
HARDWARE:
QTY: DESCRIPTION:
PART #:
28
¼” x ½” Stainless carriage bolts
GSM32022
8
¼” x ¾” Stainless carriage bolts
GSM32024
64
¼” flanged serrated nuts
GSM30023
6
¼” x ¾” Hex head cap screw
GSM33001
6
¼” x 1 ½” Hex head lag screw
GSM33062
36
#12 x ¾” Stainless sheet metal screws
GSM34177
24
#10 x ¾” Stainless sheet metal screws
GSM34170
12
#10 x ½” Stainless sheet metal screws
GSM34169
10
#10 x ¾” Stainless machine screws
GSM34098
6
#10 x ¾” Sheet metal screws
GSM33195
1
Tube silver caulk
PRM97343
1
46” x 45 ½” Rubber Floor mat
KNM01029-SUV
10
#10 x ½” Flat head sheet metal screws
GSM33150
Always
!
¾
Read all instructions before installing any Havis-Shields Equipment Corp products.
¾
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
¾
Use hardware provided with install kit
For product support, visit the Install Instructions Section of our website at
http://havis.com/Installation/Installation.html
524-9900.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
KK-K9-F14-K_INST_11-08 2 Assembled K9 Transportation System for 2003-2009 Ford Expedition Rear Support Plate (not shown) Front of Unit Rear of Unit Dome Light Mounting Legs & Hold Down Plates Passenger Side Tunnel Driver Side Tunnel Location for 11” Fan (PRM97466)
KK-K9-F14-K_INST_11-08 5 . 2. The holes in mounting plates will line up with OEM seat mount holes. Bolt the plate and leg assembly to vehicle using OEM seat bolts. Adjust leg height to 7 ¾” inch. 3. Slide K9 main housing into vehicle: Remove plastic storage compartment INSTALLATION: Note: The K9 uni...
KK-K9-F14-K_INST_11-08 6 . Attach rear support plate to bottom of rear floor lip using ¼” x ¾” hex head bolts. (Photo 3) . Attach top of K9 mounting legs to floor using ¼” les in mounting feet. . Housing final step: • Center K9 housing so tunnels are even on both sides. 45 x ¾” carriage bolts and se...
