Page 2 - Do not use the Meter as a personal safety monitor.; What the Meter Does; The beeper functions much like clicking of a Geiger counter:; Turning the Meter On; To turn the Meter on, press the green button.
CO-220 English Instruction Sheet Page 2 W Safety Information - Read First ⇒ Do not use the Meter as a personal safety monitor. ⇒ Learn and recognize the effects of CO poisoning. 0-1 PPM Normal background levels. 9 PPM ASHRAE Standard 62-1989 for living areas. 50 PPM OSHA enclosed space 8-hour averag...
Page 3 - is shown on the LCD.; Establishing a Baseline; The Meter automatically turns itself off after 20 minutes.
CO-220 English Instruction Sheet Page 3 Self-Test The Meter tests the sensor and the battery each time it is turnedon and continuously monitors the battery. If the battery is low, M is shown on the LCD. If battery power is below the level required to power the Meter, orif the sensor fails, the Meter...
Page 4 - The mute beeper icon is shown on the display.; Fluke CO-220 Carbon Monoxide Meter
CO-220 English Instruction Sheet Page 4 Muting the Beeper To mute the beeper, press the ON/OFF switch for more than 2seconds when turning the instrument on. The mute beeper icon is shown on the display. To re-enable the beeper, turn the Meter off and then turn it backon. MAX MAX 4 1 5 2 3 8 6 7 NV00...
Page 5 - Common Sources of CO; Common sources of potentially dangerous levels of CO are:
CO-220 English Instruction Sheet Page 5 Installing and Replacing the Battery 1 2 3 4 5 NV002F.EPS A Screw B Battery Door C Battery, 9 V NEDA or IEC 6LR61 , or equivalent D Battery Connector E Sensor Common Sources of CO Common sources of potentially dangerous levels of CO are: • Poorly maintained fu...
Page 6 - Appliance
CO-220 English Instruction Sheet Page 6 CO and Appliance Malfunctions The following table identifies typical problems that can producehigh levels of CO. Appliance Fuel Typical Problems Gas furnaces Room heaters Oil, naturalgas, or LPG(liquefiedpetroleumgas) 1. Cracked heat exchanger.2. Not enough ai...
Page 8 - During normal use, the Meter does not require adjustment.; Warranty; LIMITED WARRANTY & LIMITATION OF LIABILITY
CO-220 English Instruction Sheet Page 8 Calibration or Service The Meter should be calibrated once a year by an authorizedFluke service center. During normal use, the Meter does not require adjustment. Any required adjustments are made at calibration. To replace thesensor, contact an authorized Fluk...